Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “small buildings”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Collagen Fibril Orientation in Tissue Specimens From Atherosclerotic Plaque Explored Using Small Angle X-Ray Scattering

Atherosclerotic plaques can gradually develop in certain arteries. Disruption of fibrous tissue in plaques can result in plaque rupture and thromboembolism, leading to heart attacks and strokes. Collagen fibrils are important tissue building blocks and tissue strength depends on how fibrils are oriented. Fibril orientation in plaque tissue may potentially influence vulnerability to disruption. While X-ray scattering has previously been used to characterize fibril orientations in soft tissues and bones, it has never been used for characterization of human atherosclerotic plaque tissue. This study served to explore fibril orientation in specimens from human plaques using small angle X-ray scattering (SAXS). Additionally, plaque tissue was extracted from human femoral and carotid arteries, and each tissue specimen contained a region of calcified material. Three-dimensional (3D) collagen fibril orientation was determined along scan lines that started away from and then extended toward a given calcification. Fibrils were found to be oriented mainly in the circumferential direction of the plaque tissue at the majority of locations away from calcifications. However, in a number of cases, the dominant fibril direction differed near a calcification, changing from circumferential to longitudinal or thickness (radial) directions. Further study is needed to elucidate how these fibril orientations may influence plaque tissue stress–strain behavior and vulnerability to rupture.

60 APPLIED LIFE SCIENCES↗

Resources, Training, and Education Under the Heliostat Consortium: Industry Gap Analysis and Building a Resource Database

Concentrating solar power is not a widely deployed or known technology area, and the heliostat workforce community in the United States is currently small, with knowledge and expertise not widely available. The resource, training, and education (RTE) topic within the Heliostat Consortium (HelioCon) was established to address this. RTE encompasses resources, practices, and programs to ensure that (1) newcomers to the heliostat development community have an adequate knowledge base and training to conduct R&D efforts, (2) outsiders to the field are provided with resources and opportunities to join the workforce, and (3) the workforce community is a productive, healthy, and fulfilling environment for all workers. In the first year of the project, a roadmap study was conducted, in which the major gaps in RTE were identified by consulting experts in the industry, with the top gap being the lack of public accessibility to concentrating solar-thermal power (CSP) knowledge. Here, to address this, the HelioCon team has been developing a centralized web-based resource database, containing a reference library, educational videos, lists of components suppliers and software/metrology tools, a power tower plant database, and information on existing standards/guidelines.

14 SOLAR ENERGY↗

SDSS-IV MaNGA : Excavating the fossil record of stellar populations in spiral galaxies

ABSTRACT We perform a ‘fossil record’ analysis for ≈800 low-redshift spiral galaxies, using starlight applied to integral field spectroscopic observations from the SDSS-IV MaNGA survey to obtain fully spatially resolved high-resolution star formation histories (SFHs). From the SFHs, we are able to build maps indicating the present-day distribution of stellar populations of different ages in each galaxy. We find small negative mean age gradients in most spiral galaxies, especially at high stellar mass, which reflects the formation times of stellar populations at different galactocentric radii. We show that the youngest (<108.5 yr) populations exhibit significantly more extended distributions than the oldest (>109.5 yr), again with a strong dependence on stellar mass. By interpreting the radial profiles of ‘time slices’ as indicative of the size of the galaxy at the time those populations had formed, we are able to trace the simultaneous growth in mass and size of the spiral galaxies over the last 10 Gyr. Despite finding that the evolution of the measured light-weighted radius is consistent with inside-out growth in the majority of spiral galaxies, the evolution of an equivalent mass-weighted radius has changed little over the same time period. Since radial migration effects are likely to be small, we conclude that the growth of discs in spiral galaxies has occurred predominantly through an inside-out mode (with the effect greatest in high-mass galaxies), but this has not had anywhere near as much impact on the distribution of mass within spiral galaxies.

Peterken, Thomas↗

Constraints on Large-Scale White Noise in the Cosmic Density Field

We present observational constraints on large-scale white noise (LSWN) in the cosmic density field, a phenomenon predicted to arise from non-linear mode coupling during cosmological evolution. Building on the theoretical framework of Paper I, where we demonstrated that non-linearities inevitably redistribute power from small to large scales through mode mixing, we confront these predictions with current cosmological data. We modify the CLASS Boltzmann code to incorporate a white noise component $k_\mathrm{BH}/k$ in the primordial power spectrum and perform parameter estimation using current cosmological data. The non-detection of excess power on the largest observable scales places stringent upper bounds: $k_\mathrm{BH} \leq 1.80 \times 10^{-13}~\mathrm{Mpc}^{-1}$ at 99% confidence. These constraints imply the primordial power spectrum must deviate from perfect scale invariance on small scales, either through a cutoff at $k_{\mathrm{cut}} \lesssim 3~\mathrm{pc}^{-1}$ or through running of the spectral index with $α_s \lesssim -0.015$. Our results demonstrate that LSWN provides a powerful probe of the primordial spectrum at scales orders of magnitude smaller than directly observable, offering unique constraints on early-universe physics.

Barenboim, Gabriela [Valencia U., IFIC; Valencia U↗

Neural control of magnetic suspension systems

The purpose of this research program is to design, build and test (in cooperation with NASA personnel from the NASA Langley Research Center) neural controllers for two different small air-gap magnetic suspension systems. The general objective of the program is to study neural network architectures for the purpose of control in an experimental setting and to demonstrate the feasibility of the concept. The specific objectives of the research program are: (1) to demonstrate through simulation and experimentation the feasibility of using neural controllers to stabilize a nonlinear magnetic suspension system; (2) to investigate through simulation and experimentation the performance of neural controllers designs under various types of parametric and nonparametric uncertainty; (3) to investigate through simulation and experimentation various types of neural architectures for real-time control with respect to performance and complexity; and (4) to benchmark in an experimental setting the performance of neural controllers against other types of existing linear and nonlinear compensator designs. To date, the first one-dimensional, small air-gap magnetic suspension system has been built, tested and delivered to the NASA Langley Research Center. The device is currently being stabilized with a digital linear phase-lead controller. The neural controller hardware is under construction. Two different neural network paradigms are under consideration, one based on hidden layer feedforward networks trained via back propagation and one based on using Gaussian radial basis functions trained by analytical methods related to stability conditions. Some advanced nonlinear control algorithms using feedback linearization and sliding mode control are in simulation studies.

Gray, W. Steven↗

Effects of FU Orionis Outbursts on Protoplanetary Disks

In the early stages of work under this grant, we developed simulations to match the light curves of the three best studied systems: FU Ori, V1515 Cyg, & V1057 Cyg (Bell et al. 1995). We compared the details of model results to observations to test the validity of the thermal ionization instability model for outburst. In this paper, we were able to answer several of the key objections to the accretion disk outburst model for the FU Orionis phenomenon (eg. Herbig 1989). The declines in line width and reddening observed in V1057 Cyg following peak light had been used as arguments against the disk instability model. We showed these effects to be natural consequences of the slow outward progression and limited radial excursion of the ionization front during outburst. By the end of the grant period, we had begun combining the inner and outer disk models to derive the radiation expected in the planet forming region of the disk. A crucial step in this was the development of a radiative transfer model of the complete inner and outer disk system (Turner, Bodenheimer, & Bell 1997). In this work, wavelength dependent opacities were used to synthesize images and spectral energy distributions of FU Ori objects. New detailed opacities provided by Alexander (1995) allowed the resolution of coarse features such as silicate emission lines. Data for the fits were taken from the time dependent simulations in Bell et al. (1995) to which was added the effect of disk to disk or "self"-reprocessing which accounts for the illumination of the outer disk by the inner disk (Bell 1998). Through the course of work on this grant we have made considerable progress in computing detailed models of both the active outburst region of the disk and the outer quiescent disk. We have begun an investigation into the effects of a cocooning envelope. Direct comparisons with observations lend confidence that the basic underlying assumptions of the outburst model are reasonable. We are now ready to build upon these results to investigate the effects of outbursts on the central star and on the accumulation of small particles in the planet-forming regions.

Bodenheimer, Peter↗

Mathematical Innovation

Through Small Business Innovation Research funds from the Stennis Space Center, MathSoft, Inc., developed a system that can provide the building blocks for signal analysis and rapid prototyping. The product is the result of work to help NASA develop a complete understanding propulsion test data by using time frequency displays, automatic estimation and denoising, and data analysis plots for wavelet decomposition.

Source record↗

Efficiency of parallel direct optimization

Tremendous progress has been made at the level of sequential computation in phylogenetics. However, little attention has been paid to parallel computation. Parallel computing is particularly suited to phylogenetics because of the many ways large computational problems can be broken into parts that can be analyzed concurrently. In this paper, we investigate the scaling factors and efficiency of random addition and tree refinement strategies using the direct optimization software, POY, on a small (10 slave processors) and a large (256 slave processors) cluster of networked PCs running LINUX. These algorithms were tested on several data sets composed of DNA and morphology ranging from 40 to 500 taxa. Various algorithms in POY show fundamentally different properties within and between clusters. All algorithms are efficient on the small cluster for the 40-taxon data set. On the large cluster, multibuilding exhibits excellent parallel efficiency, whereas parallel building is inefficient. These results are independent of data set size. Branch swapping in parallel shows excellent speed-up for 16 slave processors on the large cluster. However, there is no appreciable speed-up for branch swapping with the further addition of slave processors (>16). This result is independent of data set size. Ratcheting in parallel is efficient with the addition of up to 32 processors in the large cluster. This result is independent of data set size. c2001 The Willi Hennig Society.

NASA Discipline Evolutionary Biology↗

Driving on the surface of Mars with the rover sequencing and visualization program

Operating a rover on Mars is not possible using teleoperations due to the distance involved and the bandwith limitations. To operate these rovers requires sophisticated tools to make operators knowledgeable of the terrain, hazards, features of interest, and rover state and limitations, and to support building command sequences and rehearsing expected operations. This paper discusses how the Rover Sequencing and Visualization program and a small set of associated tools support this requirement.

autonomy↗

Defect Depth Measurement Using White Light Interferometry

The objectives of the White Light Interferometry project are the following: (1) Demonstrate a small hand-held instrument capable of performing inspections of identified defects on Orbiter outer pane window surfaces. (2) Build and field-test a prototype device using miniaturized optical components. (3) Modify the instrument based on field testing and begin the conversion of the unit to become a certified shop-aid.

Parker, Don↗

Failure Predictions of Out-of-Autoclave Sandwich Joints with Delaminations under Flexure Loads

An analysis and a test program was conducted to investigate the damage tolerance of composite sandwich joints. The joints contained a single circular delamination between the face-sheet and the doubler. The coupons were fabricated through out-of-autoclave (OOA) processes, a technology NASA is investigating for joining large composite sections. The four-point bend flexure test was used to induce compression loading into the side of the joint where the delamination was placed. The compression side was chosen since it tends to be one of the most critical loads in launch vehicles. Autoclave cure was used to manufacture the composite sandwich sections, while the doubler was co-bonded onto the sandwich face-sheet using an OOA process after sandwich panels were cured. A building block approach was adopted to characterize the mechanical properties of the joint material, including the fracture toughness between the doubler and facesheet. Twelve four-point-bend samples were tested, six in the sandwich core ribbon orientation and six in sandwich core cross-ribbon direction. Analysis predicted failure initiation and propagation at the pre-delaminated location, consistent with experimental observations. A building block approach using fracture analyses methods predicted failure loads in close agreement with tests. This investigation demonstrated a small strength reduction due to a flaw of significant size compared to the width of the sample. Therefore, concerns of bonding an OOA material to an in-autoclave material was mitigated for the geometries, materials, and load configurations considered.

Damage↗

Failure Predictions of Out-of-Autoclave Sandwich Joints with Delaminations Under Flexure Loads

An analysis and a test program was conducted to investigate the damage tolerance of composite sandwich joints. The joints contained a single circular delamination between the face-sheet and the doubler. The coupons were fabricated through out-of-autoclave (OOA) processes, a technology NASA is investigating for joining large composite sections. The four-point bend flexure test was used to induce compression loading into the side of the joint where the delamination was placed. The compression side was chosen since it tends to be one of the most critical loads in launch vehicles. Autoclave cure was used to manufacture the composite sandwich sections, while the doubler was co-bonded onto the sandwich face-sheet using an OOA process after sandwich panels were cured. A building block approach was adopted to characterize the mechanical properties of the joint material, including the fracture toughness between the doubler and face-sheet. Twelve four-point-bend samples were tested, six in the sandwich core ribbon orientation and six in sandwich core cross-ribbon direction. Analysis predicted failure initiation and propagation at the pre-delaminated location, consistent with experimental observations. A building block approach using fracture analyses methods predicted failure loads in close agreement with tests. This investigation demonstrated a small strength reduction due to a flaw of significant size compared to the width of the sample. Therefore, concerns of bonding an OOA material to an in-autoclave material was mitigated for the geometries, materials, and load configurations considered.

Tolerance↗

A Model for Energy Buildup and Eruption Onset in Coronal Mass Ejections

Coronal mass ejections (CMEs) and eruptive flares (EFs) are the most energetic explosions in the solar system. Their underlying origin is the free energy that builds up slowly in the sheared magnetic field of a filament channel. We report the first end-to-end numerical simulation of a CME/EF, from zero-free-energy initial state through filament channel formation to violent eruption, driven solely by the magnetic-helicity condensation process. Helicity is the topological measure of linkages between magnetic flux systems, and is conserved in the corona, building up inexorably until it is ejected into interplanetary space. Numerous investigations have demonstrated that helicity injected by small-scale vortical motions, such as those observed in the photosphere, undergoes an inverse cascade from small scales to large, “condensing” at magnetic-polarity boundaries. Our new results verify that this process forms a filament channel within a compact bipolar region embedded in a background dipole field, and show for the first time that a fast CME eventually occurs via the magnetic-breakout mechanism. We further show that the trigger for explosive eruption is reconnection onset in the flare current sheet that develops above the polarity inversion line: this reconnection forms flare loops below the sheet and a CME flux rope above, and initiates high-speed outward flow of the CME. Our findings have important implications for magnetic self organization and explosive behavior in solar and other astrophysical plasmas, as well as for understanding and predicting explosive solar activity.

filaments↗

RMACXX: An Efficient High-Level C++ Interface over MPI-3 RMA

Parallel scientific applications can benefit from de- coupling communication and synchronization. One-sided pro- gramming abstractions, which separate communication from syn- chronization, have in fact served as a motivation for partitioned global address space (PGAS) models. However, the use of PGAS models in application codes in a manner that fully exploits the benefit of these programming models requires significant development effort. Meanwhile, a vast majority of scientific codes already use the Message Passing Interface (MPI) and need convenient features to support application-specific one-sided communication scenarios. MPI Remote Memory Access (RMA) can be employed for this purpose. MPI is a low-level API, however, and developing applications with MPI RMA requires programmers to be well versed in its nuances. We present RMACXX, a compact set of C++ bindings to MPI-3 RMA, to ease the use of MPI RMA. Unlike other PGAS models, which may have interoperability issues with MPI, RMACXX is written on top of MPI and uses the same runtime as MPI. The basic functionality of RMACXX adds only a relatively small number of extra instructions (about 20) to the critical communication path. Moreover, RMACXX provides an intuitive API for building a wide variety of scientific applications while enjoying performance matching handwritten MPI-3 RMA codes.

MPI-3 RMA, one-sided communication, PGAS, C++, exp↗

Downscaling Synthetic Populations to Realistic Residential Locations

High-fidelity pattern of life (PoL) models require realistic origin points for predictive trip modeling. This paper develops and demonstrates a reproducible method using open data to match synthetic populations generated from census surveys to plausible residential locations (building footprints) based on housing attributes. This approach presents promise over extant methods based on housing density, particularly in small neighborhood areas with heterogeneous land-use.

Tuccillo, Joe↗

Content and Representation of Information Needed to Support Time-Constrained Problem Solving

NASA’s current mission-operations paradigm originated with Project Mercury and endured with minimum evolution through the Apollo Program, Space Shuttle Program, and ISS missions. At its foundation is a near-complete real-time dependence on a ground team to manage the combined state of the mission, vehicle, and crew. Utilizing many engineers and operators with broad and deep expertise; large, distributed datasets including extensive telemetry; and expansive analytical and computing power, this ground team has served as the safety net for crewed spaceflight missions over the past 60 years. This approach must change to address challenges associated with missions beyond low Earth orbit (BLEO), including infrequent resupply, reduced ability to evacuate, and delayed communications that prohibit real-time operational support. We anticipate that a necessary part of this change will be increased independence for the crew, as roles and responsibilities traditionally performed by ground teams move on board the vehicle. While many risks are associated with Earth-independent operations, one particular concern is ensuring that the crew will have adequate onboard support to perform urgent problem solving when communication with the ground is delayed or intermittent. A key resource that enables the ground team to respond to anomalies quickly and effectively is the extraordinary expertise and experience it possesses. It is comprised of 80+ experts on at any given time, with a combined 600+ years of system-specific experience across 22 unique console disciplines. A small crew will face the unprecedented challenge of independently responding to anomalies that have historically been handled by a team 20 times their size. Another important resource upon which the ground heavily relies to support procedure execution and anomaly response is data. The amount of telemetry data that each flight controller monitors is extensive. In addition, as the ground team works to further assess impacts, trouble shoot, identify workarounds, and oversee procedure execution, it accesses and synthesizes engineering and procedure information, as well as system build, test, and configuration documentation. It is not feasible nor useful to put all these data onboard as crews become more Earth independent. Each member of a small Mars mission small crew will have multiple roles beyond monitoring telemetry and data gathering, and multiple roles within anomaly resolution processes, thereby limiting their capacity for copious amounts of information. Moreover, while access is necessary, it alone is insufficient. Information will need to be compiled, refined, and represented appropriately to support the crew’s reduced attention and expertise. This work seeks to understand the content and representation of information needed to support time-constrained problem solving and decision making by the crew without real-time ground support. To build this understanding, we first surveyed the literature, focusing on how expert problem solvers construct and manipulate their mental models. Next, we interviewed expert problem solvers in spaceflight and analogous domains and surveyed industry solutions for data presentation. Finally, we analyzed current spaceflight operations by investigating flight controller anomaly resolution processes during ISS training simulations and real operational events. These methods led to creating a problem-solving framework that details common themes and features of attending to, assessing, analyzing, and acting on problems in complex, time-constrained domains. Using this framework and the results of our analysis, we identified conceptual data representations needed for crew-led problem-solving. Preliminary onboard user interface concepts to meet identified needs will be presented.

anomaly response↗

Indoor Occupant Counting by RF Backscattering

Building HVAC (heating, ventilation and air conditioning) consumes approximately 13% of all energy consumption in USA. Motion detectors, cameras and user programmable thermostats have been shown to be ineffective for HVAC controls to save energy, mostly due to the user concerns of comfort, reliability and privacy. A new HVAC control system based on real-time occupant counting that is fully automated, highly accurate, economically sensible and preserving privacy and aesthetics can thus bring forth a disruptive impact to this large energy sector. Our indoor occupant monitoring technology is based on the radio-frequency identification system (RFID), deployed in the room, not on the occupants. One reader with four antennas can be deployed on the ceiling or behind the ceiling panels for every thousand square feet in home, office and assisted living, with or without room partitions. The sticker-like passive tag, 10 cents each and maintenance-free, are profusely hidden on the wall or inside the furniture at arbitrary position, preserving privacy and aesthetics. The large number of tags can realize diverse observation points to accommodate arbitrary room layouts, which is impractical by other active units of camera, infrared, radar or lidar. With 20 tags, the system can reliably detect the number of occupants. For 100 tags, occupant posture and location can be known. The technology has been verified in the research labs and test buildings with very high accuracy. When the real-time occupant number can be accurately known without assuming devices on occupants or occupant motion, the building HVAC system can be automated to achieve building energy saving without sacrificing occupant comfort. According to our limited testing in a few types of building models and the simplified cost calculation, the RFID system has low overall cost in production, deployment, operation and maintenance. The signal processing algorithm based on machine learning requires very small number of training cases as most learning is transferrable for various layouts, and very low computational needs during operation, according to our testing in four different room sizes and layouts. In our preliminary estimate from HVAC saving alone, the RFID system can potentially pay for itself within 1.5 years, in addition to the other enhancement in building automation systems (BAS). Our commercialization strategy and business pitch deck focus on venturing this Cornell occupant monitoring technology into BAS and energy management markets. We have identified three broad BAS market segments of senior living, residential buildings, and office buildings. We have put together the minimum viable product characteristics for these identified segments, including analyses on total cost and competing technologies, as well as the fit and technical gaps for these market segments. We intend to bring the technology to market by licensing or partnering with existing BAS vendors. A list of potential collaborators and licensing partner candidates was assembled for different aspects of integrating our technology into a potential product that can be used with BAS.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Small fatigue crack growth behavior of Ti-6Al-4V produced via selective laser melting: In situ characterization of a 3D crack tip interactions with defects

Small fatigue crack growth (SFCG) behavior is examined for additively manufactured Ti-6Al-4V specimens with optimal and trial build conditions (representing an increased degree of defects) through a combination of in situ tomography and in situ energy dispersive X-ray diffraction. The results showed slower crack growth rates for the SFCG samples compared to the long cracks (which was not expected). Finally, in the case of the trial conditions, the increased levels of porosity deterred crack growth by blunting the crack, as evident by the in situ tomography characterization.

36 MATERIALS SCIENCE↗