Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “slots”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

End-Loaded, Cavity-Backed, Cross-Slot Antennas

End-loaded, cavity-backed, cross-slot antennas developed for use in mobile/satellite service and other similar commercial services. Intended to transmit and receive in circular polarization at frequencies between 1 and 2 GHz. Fabricated and tuned to operating frequencies easily. Made without end loading or with end loading tailored to obtain various desirable electrical characteristics. Advantages include lower losses, lighter weights, smaller sizes, and greater bandwidths.

Manshadi, Farzin↗

User's guide to PANCOR: A panel method program for interference assessment in slotted-wall wind tunnels

Guidelines are presented for use of the computer program PANCOR to assess the interference due to tunnel walls and model support in a slotted wind tunnel test section at subsonic speeds. Input data requirements are described in detail and program output and general program usage are described. The program is written for effective automatic vectorization on a CDC CYBER 200 class vector processing system.

Kemp, William B., Jr.↗

Queueing models for token and slotted ring networks

Currently the end-to-end delay characteristics of very high speed local area networks are not well understood. The transmission speed of computer networks is increasing, and local area networks especially are finding increasing use in real time systems. Ring networks operation is generally well understood for both token rings and slotted rings. There is, however, a severe lack of queueing models for high layer operation. There are several factors which contribute to the processing delay of a packet, as opposed to the transmission delay, e.g., packet priority, its length, the user load, the processor load, the use of priority preemption, the use of preemption at packet reception, the number of processors, the number of protocol processing layers, the speed of each processor, and queue length limitations. Currently existing medium access queueing models are extended by adding modeling techniques which will handle exhaustive limited service both with and without priority traffic, and modeling capabilities are extended into the upper layers of the OSI model. Some of the model are parameterized solution methods, since it is shown that certain models do not exist as parameterized solutions, but rather as solution methods.

Peden, Jeffery H.↗

Characterization of tapered slot antenna feeds and feed arrays

A class of feed antennas and feed antenna arrays used in the focal plane of paraboloid reflectors and exhibiting higher than normal levels of cross-polarized radiation in the diagonal planes is addressed. A model which allows prediction of element gain and aperture efficiency of the feed/reflector system is presented. The predictions are in good agreement with experimental results. Tapered slot antenna (TSA) elements are used an example of an element of this type. It is shown that TSA arrays used in multibeam systems with small beam spacings are competitive in terms of aperture efficiency with other, more standard types of arrays incorporating waveguide type elements.

Kim, Young-Sik↗

New channelised coplanar waveguide to rectangular waveguide post and slot couplers

Two new coplanar waveguide to rectangular waveguide couplers with coupling through a post and a slot are experimentally demonstrated. The couplers operate over the Ku-band transmission and X-band reception frequencies that are designated for satellite communications. The measured insertion loss and return loss are about 1 dB, respectively, for both couplers.

Simons, R. N.↗

Low loss waveguide four-port crossover circuit and its application for cross-slot antenna feed

A four-way crossover circuit using a cylindrical cavity with four rectangular input/output ports has been designed to feed a cross-slot antenna to achieve dual polarization. Because all the input and output circuits are waveguides, the network is especially useful for high power systems and millimeter wave applications. The crossover circuit exhibits a very low insertion loss and good isolation.

Chang, K.↗

Nonplanar linearly tapered slot antenna with balanced microstrip feed

A nonplanar linearly tapered slot antenna (LTSA) has been fabricated and tested at frequencies from 8 to 32 giga-Hz. The LTSA is excited by a broadband balanced microstrip transformer. The measured results include the input term return loss as well as the radiation pattern of the antenna.

Simons, Rainee N.↗

Broadband vertical interconnects using slot-coupled shielded microstrip lines

A full-wave space-domain integral equation analysis of aperture coupled shielded microstrip lines is presented based on the Equivalence Principle. The formulation includes the capability to model multilayered substrates through the derivation of the associated dyadic Green's functions which represent the layers through impedance boundary conditions. The method of moments is used to solve for the line currents and slot voltage with even and odd mode excitations which are then interpreted through transmission line analysis to determine the two-port scattering parameters. A parametric study together with experimental data is presented which demonstrates the behavior of the coupler and the accuracy of the technique.

Vandenberg, Norman L.↗

New Techniques for Exciting Linearly Tapered Slot Antennas with Coplanar Waveguide

Two new techniques for exciting a linearly tapered slot antenna (LTSA) with coplanar waveguide (CPW) are introduced. In the first approach, an air bridge is used to couple power from a CPW to an LTSA. In the second approach, power is electromagnetically coupled from a finite CPW (FCPW) to an LTSA. Measured results at 18 GHz show excellent return loss and radiation patterns.

Simons, R. N.↗

New coplanar waveguide feed network for 2 x 2 linearly tapered slot antenna subarray

A novel feed method is presently demonstrated for a 2 x 2 linearly tapered slot antenna (LTSA) on the basis of a coplanar-waveguide (CPW)-to-slotline transition and a coax-to-CPW in-phase, four-way power divider. The LTSA subarray exhibits excellent radiation patterns and return-loss characteristics at 18 GHz, and has symmetric beamwidth; its compactness renders it applicable as either a feed for a reflector antenna or as a building-block for large arrays.

Simons, Rainee N.↗

Results of an experimental investigation of the flow field in the head-end star slot section of a Solid Rocket Motor

Cold flow tests of a one-tenth scale model based on the geometry of the Space Shuttle Solid Rocket Motor, SRM, head-end section and its single-port igniter, along with two models of a four port igniter, have been conducted. The tests were done to establish quantitative as well as qualitative data on the behavior of the flow inside the star slot during the early part of the ignition transient. This paper presents the data obtained from these tests and discusses the implications of the data with respect to ignition transients of solid rocket motors which have head-end star grains.

Ciucci, A.↗

Moment method analysis of linearly tapered slot antennas: Low loss components for switched beam radiometers

A Moment Method Model for the radiation pattern characterization of single Linearly Tapered Slot Antennas (LTSA) in air or on a dielectric substrate is developed. This characterization consists of: (1) finding the radiated far-fields of the antenna; (2) determining the E-Plane and H-Plane beamwidths and sidelobe levels; and (3) determining the D-Plane beamwidth and cross polarization levels, as antenna parameters length, height, taper angle, substrate thickness, and the relative substrate permittivity vary. The LTSA geometry does not lend itself to analytical solution with the given parameter ranges. Therefore, a computer modeling scheme and a code are necessary to analyze the problem. This necessity imposes some further objectives or requirements on the solution method (modeling) and tool (computer code). These may be listed as follows: (1) a good approximation to the real antenna geometry; and (2) feasible computer storage and time requirements. According to these requirements, the work is concentrated on the development of efficient modeling schemes for these type of problems and on reducing the central processing unit (CPU) time required from the computer code. A Method of Moments (MoM) code is developed for the analysis of LTSA's within the parameter ranges given.

Koeksal, Adnan↗

Space Power Amplification with Active Linearly Tapered Slot Antenna Array

A space power amplifier composed of active linearly tapered slot antennas (LTSA's) has been demonstrated and shown to have a gain of 30 dB at 20 GHz. In each of the antenna elements, a GaAs monolithic microwave integrated circuit (MMIC) three-stage power amplifier is integrated with two LTSA's. The LTSA and the MMIC power amplifier has a gain of 11 dB and power added efficiency of 14 percent respectively. The design is suitable for constructing a large array using monolithic integration techniques.

Simons, Rainee N.↗

Moment method analysis of linearly tapered slot antennas

A method of moments (MOM) model for the analysis of the Linearly Tapered Slot Antenna (LTSA) is developed and implemented. The model employs an unequal size rectangular sectioning for conducting parts of the antenna. Piecewise sinusoidal basis functions are used for the expansion of conductor current. The effect of the dielectric is incorporated in the model by using equivalent volume polarization current density and solving the equivalent problem in free-space. The feed section of the antenna including the microstripline is handled rigorously in the MOM model by including slotline short circuit and microstripline currents among the unknowns. Comparison with measurements is made to demonstrate the validity of the model for both the air case and the dielectric case. Validity of the model is also verified by extending the model to handle the analysis of the skew-plate antenna and comparing the results to those of a skew-segmentation modeling results of the same structure and to available data in the literature. Variation of the radiation pattern for the air LTSA with length, height, and taper angle is investigated, and the results are tabulated. Numerical results for the effect of the dielectric thickness and permittivity are presented.

Koeksal, Adnan↗

Effect of a Dielectric Overlay on a Linearly Tapered Slot Antenna Excited by a Coplanar Waveguide

The effect of a dielectric overlay on a linearly tapered slot antenna (LTSA) is studied. The LTSA under study has very wide bandwidth and excellent radiation patterns. A dielectric overlay improves the patterns and directivity of the antenna by increasing the electrical length and effective aperture of the antenna. A dielectric overlay can also be used to reduce the physical length of the antenna without compromising the pattern quality.

Simons, Rainee N.↗

Pressure Distribution on a Slotted R.A.F. 31 Airfoil in the Variable Density Wind Tunnel

Measurements were made in the variable density wind tunnel to determine the pressure distribution over one section of a R.A.F. 31 airfoil with a leading edge slot fully open. To provide data for the study of scale effect on this type of airfoil, the tests were conducted with air densities of approximately one and twenty atmospheres.

Jacobs, Eastman N↗

Wind tunnel research concerning lateral control devices, particularly at high angles of attack VII : Handley Page tip and full-span slots with ailerons and spoilers

Tests were made with ordinary ailerons and different sizes of spoilers on rectangular Clark Y wing models with Handley Page tip and full span slots. The tests showed the effect of the control devices on the general performance of the wings as well as on the lateral control and lateral stability characteristics.

Weick, Fred E↗