Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “single crystal materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Flipperons for Improved Aerodynamic Performance

Lightweight, piezoelectrically actuated bending flight-control surfaces have shown promise as means of actively controlling airflows to improve the performances of transport airplanes. These bending flight-control surfaces are called flipperons because they look somewhat like small ailerons, but, unlike ailerons, are operated in an oscillatory mode reminiscent of the actions of biological flippers. The underlying concept of using flipperons and other flipperlike actuators to impart desired characteristics to flows is not new. Moreover, elements of flipperon-based active flow-control (AFC) systems for aircraft had been developed previously, but it was not until the development reported here that the elements have been integrated into a complete, controllable prototype AFC system for wind-tunnel testing to enable evaluation of the benefits of AFC for aircraft. The piezoelectric actuator materials chosen for use in the flipperons are single- crystal solid solutions of lead zinc niobate and lead titanate, denoted generically by the empirical formula (1-x)[Pb(Zn(1/3)Nb(2/3))O3]:x[PbTiO3] (where x<1) and popularly denoted by the abbreviation PZN-PT. These are relatively newly recognized piezoelectric materials that are capable of strain levels exceeding 1 percent and strain-energy densities 5 times greater than those of previously commercially available piezoelectric materials. Despite their high performance levels, (1-x)[Pb(Zn(1/3)Nb(2/3))O3]:x[PbTiO3] materials have found limited use until now because, relative to previously commercially available piezoelectric materials, they tend to be much more fragile.

Mabe, James H.↗
DOE OSTI2022

Active and passive defects in tetragonal tungsten bronze relaxor ferroelectrics

Tetragonal tungsten bronze (TTB) based oxides constitute a large family of dielectric materials which are known to exhibit complex distortions producing incommensurately modulated superstructures as well as significant local deviations from their average symmetry. The local deviations produce diffuse scattering in diffraction experiments. The structure as well as the charge dynamics of these materials are anticipated to be sensitive to defects, such as cation or oxygen vacancies. In this work, in an effort to understand how the structural and charge dynamical properties respond to these two types of vacancy defects, we have performed measurements of dielectric susceptibilities and single crystal diffraction experiments of two types of TTB materials with both ‘filled’ (Ba 2 NdFeNb 4 O 15 and Ba 2 PrFeNb 4 O 15 ) and ‘unfilled’ (Sr 0.5 Ba 0.5 Nb 2 O 6 ) cation sublattices. We also perform these measurements before and after oxygen annealing, which alters the oxygen vacancy concentrations. Surprisingly, we find that many of the diffuse scattering features that are present in the unfilled structure are also present in the filled structure, suggesting that the random fields and disorder that are characteristic of the unfilled structure are not responsible for many of the local structural features that are reflected in the diffuse scattering. Furthermore, oxygen annealing clearly affected both color and dielectric properties, consistent with a diminishment of the oxygen vacancy concentration, but had little effect on observed diffuse patterns.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Regioisomer-Specific Crystallization of Diglycidyl Ether of Bisphenol F Epoxy Resin

Diglycidyl ether of bisphenol F (DGEBF) is a common industrial epoxy resin, desired for its possible replacement of the bisphenol A (BPA) analogue DGEBA due to potential health hazards of BPA. During curing, crystallization of the DGEBF resin can cause inaccurate resin-to-hardener ratios, resulting in incomplete crosslinking; therefore, understanding the crystallization of DGEBF is important for proper industrial control of the material. Here, in this work, we utilized a combination of single-crystal x-ray diffraction, Raman spectroscopy, and 1 H-NMR to investigate the crystallization of DGEBF. We observed crystallization of two DGEBF regioisomers: ortho-ortho’-DGEBF and ortho-para’-DGEBF, and report their crystal structures. Notably, para-para’-DGEBF crystallization is not observed, indicating crystallization of this regioisomer does not occur under ambient conditions. Density functional theory calculations were performed to describe the phonon modes of the ortho-ortho’- and ortho-para’-DGEBF structures, corroborating Raman signatures for the respective isomers. Using a phonon mode analysis, we identify the presence of three specific optical vibrational modes at 631.3, 344.1, and 345.6 cm -1 that are unique to the para monomer. This work offers insights into the crystallization behavior of DGEBF resins under ambient conditions and may inform potential industrial application of this material.

Neu, Jennifer [Oak Ridge National Laboratory (ORNL↗
DOE OSTI2021

Topological approach to electron correlations at fractional quantum Hall effect

Highlights: • Braids in 2D electron systems in magnetic field acquire a cyclotron metrics. • Commensurability of 2D braids with Wigner crystal of electrons leads to FQHE. • Homotopy invariants define the hierarchy of FQHE universal in all 2D Hall systems. • Composite fermions illustrate multiloop braids in the simplest homotopy case. • Correlations in FQHE reveal long-range quantum entanglement of all electrons. The classification of homotopy invariants in interacting multi-electron 2D systems at quantizing magnetic fields is presented, explaining the topologically protected correlations occurring at integer and fractional quantum Hall effects. The long-range quantum entanglement is essential for homotopy correlated phases in contrast to the binary entanglement for conventional phases with local order parameters. The classification of homotopy long-range correlated phases induced by the Coulomb interaction of electrons has been derived in terms of homotopy invariants, which are universal and robust against local disorder and single-particle crystal field, as illustrated by experimental observations in various materials with different microscopic structure, like GaAs 2DES, graphene monolayer and bilayer and in Chern topological insulators. The homotopy phases are demonstrated to be topologically protected and immune to single-particle perturbations, temperature chaos and variation of the electron interaction strength. The nonzero repulsive interaction between electrons is shown, however, to be essential for the definition of the homotopy invariants, which disappear in gaseous systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Cryo-quenched Fe–Ni–Cr alloy decorative steel single crystals II: Alloy phases, structure, hardness, tensile, tribological, magnetic and electronic properties

We have previously reported (Boatner et al., J. Alloys Compd. 691 (2017) 666–671) on the discovery, formation, processing, and application of a new decorative ternary steel alloy and on its use in a wide range of practical applications including: custom and commercial knives, art objects, jewelry, electronics, and furniture. This decorative property results when polished single crystals of the 70 wt%Fe-15 wt%Ni-15 wt% Cr austenitic alloy are cryo-quenched into the martensitic phase resulting in the formation of a three-dimensional raised pattern of mixed austenitic/martensitic laths. These laths propagate across large dimensions of the material due to the absence of grain boundaries in the single crystal. The macroscopic optically reflective 3-D decorative pattern reproduces the structural symmetry inherent in the single-crystal orientation. This pattern results solely from the metallurgical phase properties of the ternary alloy and is completely distinct from the properties of Damascus steels or more modern so-called pattern-welded steels. Here we use X-ray diffraction, nanoindentation, hardness measurements/scratch testing, tribological measurements, and alloy resistivity and magnetization methods to obtain a more fundamental and comprehensive study of the effects of the austenitic/martensitic phase transition on the structural and physical properties of the 70 wt%Fe-15 wt%Ni-15 wt% Cr alloy. These results reveal new insight into irreversible phenomena that are associated with the inhibited phase transition on heating of the two-phase, mixed austenitic/martensitic structure that is formed subsequent to cryo-quenching the alloy crystal to 77 K.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Optimization of La 2–x Sr x CuO 4 Single Crystal Film Growth via Molecular Beam Epitaxy

Atomic layer-by-layer molecular beam epitaxy (ALL-MBE) combined with ozone is one of the best methods to fabricate single-crystal thin films of complex oxides. Cuprate such as La 2-x Sr x CuO 4 (LSCO) is a representative complex-oxide high-temperature superconductor (HTS) material. Our group utilizes this method to produce high-quality single-crystal HTS films with atomically smooth surfaces and interfaces. In addition, ALL-MBE enables us to engineer multilayer heterostructures with atomic precision. This allows the fabrication of tunnel junctions, various nanostructures, and other HTS devices of interest for superconducting electronics. We have synthesized over three thousand LSCO thin films in the past two decades. These films’ structural and electronic properties have been studied and characterized by various methods. Here, we distill the extensive experience we accumulated into a step-by-step protocol to fabricate atomically perfect LSCO films. The recipe includes substrate preparation, ozone generation and distillation, source calibration, the in situ monitoring of the film synthesis, post-growth annealing, and ex situ characterization. It discloses a reproducible way to fabricate single-crystal LSCO films for basic research and HTS electronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1998

Growth of Bulk Single Crystals of Dicyanovinyl-Ansiole and its Derivatives for Nonlinear Optical Applications

Bulk single crystals of a series of thermally stable nonlinear optical organic materials, Dicyanovinyl-anisole (DIVA) and their methoxy derivatives, have been successfully grown using the Bridgman-Stockbarger technique. The growth conditions are chosen to be temperature gradient of 5 to 10 C/cm and lowering rate of 0.1 to 0.3 mm/h. Single crystals of DIVA and its derivatives, of 8 x 8 x 50 cu mm in size, have been grown while maintaining a flat solid-liquid growth interface.

Gebre, T.↗
NASA NTRS1976

Considerations to achieve directionality for gamma ray lasers

A method of alignment of nuclei for a gamma ray laser and a means of achieving preferential emission of radiation along the crystal axis are studied. Atomic alignment was achieved by materials researchers who made composite structures composed of needle-like single crystals all with the same orientation and all pointing in the same direction contained in a matrix of cobalt or nickel. The proposed method of preferential emission of radiation along the aligned needles is to have a symmetric field gradient at the nucleus and a sequence of excited levels of spin and parity 2(+) and 0(+). The proposed scheme reduces the density of excited states required for lasing and reduces the linewidth due to inhomogenous broadening. Mossbauer absorption experiments intended to test these ideas are outlined.

Jha, S.↗
DOE OSTI2025

Understanding the Effect of Sample Geometry on Temperature Distribution during Optical Floating Zone Crystal Growth in Vacuum Environment through Heat Transfer Modeling

Optical floating zone furnaces (OFZ) have had a transformative impact on fundamental science due to their ability to rapidly produce large single crystals of a wide variety of complex materials. However, a quantitative understanding of the OFZ growth environment is generally lacking due to the difficulty of measuring the local sample temperatures during OFZ growth, as well as to the general lack of information about the temperature-dependent physical parameters needed to model heat transfer. To overcome these challenges, we apply a physics-based heat transfer model, parametrized by measurements from synchrotron experiments and a machine-learning (ML) algorithm, to simulate the temperature distributions of samples heated in an OFZ furnace in a vacuum environment. This model is used to quantitatively understand how the sample maximum temperature and temperature gradient (key parameters that influence the success of crystal growth) are affected by the rod size, rod shape, and heat-zone position on the rod. The results of this study can be applied to make informed decisions on how crystal growth parameters can be tuned to modify temperature profiles and to optimize crystal growth outcomes even when data on internal sample temperature profiles (e.g., those obtained through in situ synchrotron experiments) are not accessible.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Ambient Aging of Epitaxial and Polycrystalline Rhenium Thin Films

Extending the lifetime of superconducting qubits requires materials that are resistant to surface oxide formation. Rhenium has emerged as one such promising material. Because grain boundaries can promote material degradation, this project compares epitaxial (single-crystal, no grain boundaries) and polycrystalline (many grain boundaries) rhenium thin films after three years of ambient environmental exposure. Epitaxial rhenium remained free of undesired particles, while polycrystalline rhenium developed higher-oxide surface particles. Epitaxial rhenium demonstrated greater resistance to aging and oxidation, making it a more promising candidate for superconducting qubits. Surface characterization using scanning electron microscopy, energy dispersive x-ray spectroscopy, and x-ray photoelectron spectroscopy revealed localized oxygen and nitrogen enrichment together with a Re⁷⁺ oxidation state in the polycrystalline surface particles, consistent with the proposed formation of ammonium perrhenate. Ongoing cleaning and XPS depth profiling will further determine the identity and origin of the surface crystallites.

Wiacek, Wiktoria [William Rainey Harper Coll.]↗
NASA NTRS1976

Rolling-contact deformation of MgO single crystals

Magnesium oxide single crystals were used as a model bearing material and deformed by rolling contact with a steel ball 0.64 cm in diameter. A dependence of depth of slip on rolling velocity which persisted with increasing numbers of rolling-contact cycles was discovered. The track width, track hardness and dislocation interactions as observed by transmission electron microscopy all increased in a consistent manner with increasing cycles. The rolling-contact state of stress produces a high density of dislocations in a localized zone. Dislocation interaction in this zone produces cleavage-type cracks after a large number of rolling-contact cycles. The orientation of the crystal influences the character of dislocation accumulation.

Dufrane, K. F.↗
NASA NTRS1984

Structural Characterization of Solar Silicon

Compared to single crystal silicon, solar silicon generally contains large residual stresses and numerous structural defects. During subsequent processing, the defect structure can undergo further changes since, at the high temperatures required for diffusion, dislocations are sufficiently mobile to rearrange themselves in patterns which reduce long range residual stresses. This process, which is similar to the polygonization of strained metals, has no counterpart in single crystal silicon. Many of the solar silicon materials are grown from graphite dies and crucibles and therefore contain carbon concentrations in excess of 1E18. The interactions between carbon, crystal defects, intrinsic point defects, oxygen and diffusing dopants are discussed.

Ast, D. G.↗
NASA NTRS1984

Bolometers operated at 0.1 K and 0.2 K cooled by adiabatic demagnetization

The construction of bolometers operating at temperatures of 0.1 K and 0.2 K and cooled by adiabatic demagnetization is reported. The electrical noise-equivalent power (NEP) of the bolometers was found to be 1.8 and 6.6 x 10 to the -16th W/sq rt Hz, respectively. These values are within a factor of two of the expected performance based upon bolometer theory. The thermistor material used was gallium-doped single-crystal germanium, for which a resistivity temperature dependence is found.

Lesyna, L.↗
NASA NTRS1986

Constitutive modeling for single crystal superalloys

The inelastic response of single crystal gamma/gamma prime superalloys is quite different from the behavior of polycrystalline nickel base superalloys. Upto a critical temperature the yield stress of single crystal alloys is a function of the material orientation relative to the direction of the applied stress and the material exhibits significant tension/compression asymmetry. This behavior is primarily due to slip on the octahedral slip system. Above the critical temperature there is a sharp drop in the yield stress, cube slip becomes more predominant and the tension/compression asymmetry is reduced. Similar orientation and tension/compression asymmetry is observed in creep and secondary creep above the critical temperature is inferred to occur by octahedral slip. There are two exceptions to this behavior. First, loading near the (111) orientation exhibits cube slip at all temperatures, and; second, loading near the (001) orientation produces only octahedral slip at all temperatures. The constitutive model is based on separating the total global strain into elastic and inelastic components. This model is developed and briefly discussed.

Stouffer, D. C.↗
NASA NTRS1995

The control of purity and stoichiometry of compound semiconductors by high vapor pressure transport

In this report we summarize the results of a three year research program on high pressure vapor transport (HPVT) of compound semiconductors. Most of our work focused onto pnictides, in particular ZnGeP2, as a model system. Access to single crystals of well controlled composition of this material is desired for advancing the understanding and control of its point defect chemistry in the contest of remote, real-time sensing of trace impurities, e.g., greenhouse gases, in the atmosphere by ZnGeP2 optical parametric oscillators (OPO's).

Bachmann, Klaus J.↗
NASA NTRS2004

Successful Surface Treatments for Reducing Instabilities in Advanced Nickel-base Superalloys for Turbine Blades

An optimized carburization treatment has been developed to mitigate instabilities that form in the microstructures of advanced turbine airfoil materials. Current turbine airfoils consist of a single crystal superalloy base that provides the mechanical performance of the airfoil, a thermal barrier coating (TBC) that reduces the temperature of the base superalloy, and a bondcoat between the superalloy and the TBC, that improves the oxidation and corrosion resistance of the base superalloy and the spallation resistance of the TBC. Advanced nickel-base superalloys containing high levels of refractory metals have been observed to develop an instability called secondary reaction zone (SRZ), which can form beneath diffusion aluminide bondcoats. This instability between the superalloy and the bondcoat has the potential of reducing the mechanical properties of thin-wall turbine airfoils. Controlled gas carburization treatments combined with a prior stress relief heat treatment and adequate surface preparation have been utilized effectively to minimize the formation of SRZ. These additional processing steps are employed before the aluminide bondcoat is deposited and are believed to change the local chemistry and local stresses of the surface of the superalloy. This paper presents the detailed processing steps used to reduce SRZ between platinum aluminide bondcoats and advanced single crystal superalloys.

Locci, Ivan E.↗
NASA NTRS1961

Neutralization of Hydroxide Ion in Melt-Grown NaCl Crystals

Many recent studies of solid-state phenomena, particularly in the area of crystal imperfections, have involved the use of melt-grown NaCl single crystals. Quite often trace impurities in these materials have had a prominent effect on these phenomena. Trace amounts of hydroxide ion have been found in melt-grown NaCl crystals. This paper describes a nondestructive method of neutralizing the hydroxide ion in such crystals. Crystals of similar hydroxide content are maintained at an elevated temperature below the melting point of NaCl in a flowing atmosphere containing. dry hydrogen chloride. Heat treatment is continued until an analysis of the test specimens shows no excess hydroxide ion. A colorimetric method previously described4 is used for this analysis.

Otterson, Dumas A.↗