Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “separator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Reduction of profile drag by blowing out through peg holes in areas of streamline separation bubbles

Streamline separation bubbles on aircraft profiles and fuselages were investigated. The additional drag was examined in relation to increased angle of incidence and unusually high wall sheer stress. A reduction of the separation bubble and a decrease in drag is obtained with pneumatic turbulators that blow ram air out of 0.6mm pilot tubes at a distance of 16 mm. The pneumatic models are implemented at various positions and are found to be effective after the position of separation.

Horstmann, K. H.↗
NASA NTRS1981

Scale effects on turbulent boundary layer development and flow separation around V/STOL inlets at high incidence

Numerical methods for calculating laminar and turbulent boundary layers development around V/STOL engine inlets at high incidence angles, along with the procedures for predicting flow separation, are presented. Results of scale-effects, which are obtained by a numerical scaling procedure on the boundary layer characteristics and incidence angles at onset of separation are discussed. The interesting 'cross-over' phenomena, where the full-scale models actually exhibit earlier separation than the scaled-models, is illustrated for a typical V/STOL inlet at a certain operating condition. Some of the numerical results are compared with the existing wind-tunnel test data for a 1/6 scale inlet model to demonstrate the validity of the numerical approach.

Chou, D. C.↗
NASA NTRS1981

A discrete vortex method for the non-steady separated flow over an airfoil

A discrete vortex method was used to analyze the separated non-steady flow about a cambered airfoil. The foil flow modelling is based on the thin lifting-surface approach, where the chordwise location of the separation point is assumed to be known from experiments or flow-visualization data. Calculated results provided good agreement when compared with the post-stall aerodynamic data of two airfoils. Those airfoil sections differed in the extent of travel of the separation point with increasing angle of attack. Furthermore, the periodic wake shedding was analyzed and its time-dependent influence on the airfoil was investigated.

Katz, J.↗
NASA NTRS1980

Electrophoretic cell separation by means of immunomicrospheres

The electrophoretic mobility of fixed human red blood cells immunologically labeled with polymeric (4-vinyl)pyridine or polyglutaraldehyde microspheres was altered to a considerable extent. This observation was utilized in the preparative scale electrophoretic separation of human and turkey fixed red blood cells, whose mobilities under normal physiological conditions do not differ sufficiently to allow their separation by continuous flow electrophoresis. It is suggested that resolution in the electrophoretic separation of cell subpopulations, currently limited by finite and often overlapping mobility distributions, may be significantly enhanced by immuno-specific labeling of target populations using microspheres.

Rembaum, A.↗
NASA NTRS1981

Crossflow effects on steady and fluctuating pressures on an ogive-cylinder cone-frustum model in supersonic separated flow

Wind-tunnel tests were conducted on an ogive-cylinder model with two axisymmetric protuberances having cone frustum angles of cone = 23 deg and 45 deg that were used to generate detached shock waves and the resulting separated flow areas downstream of the shock. The tests were conducted in a 9 by 7 foot supersonic wind tunnel at a free-stream Mach number of 2.0 and at Reynolds numbers of 1.5 x 1 million and 3.9 x 1 million, based on body diameter. The model had an afterbody fineness ratio of 8.3, and the ogive nose had a fineness ratio of 3.0. Two characteristics of the fluctuating pressures in surface vortex flows that result from the crossflow component, (velocity along the tunnel longitudinal axis free stream angle of attack), in combination with changes in the longitudinal pressure gradient were measured: (1) the broadband, rms-pressure coefficients and (2) the power spectral densities. Measurements are presented for various flow regions on the model such as the attached turbulent boundary layer, the detached frustum shock wave, and separated flow areas. The results indicate that the pressure fluctuations around or in the neighborhood of the foci of the vortex flows had broadband intensities and power spectral densities nearly identical to the levels previously measured in separated-flow regions at angles of attack of 0 deg.

Dods, J. B., Jr.↗
NASA NTRS1970

Separator for alkaline electric batteries and method of making

Battery separator membranes of high electrolytic conductivity comprising a cellulose ether and a compatible metallic salt of water soluble aliphatic acids and their hydroxy derivatives are described. It was found that methyl cellulose can be modified by another class of materials, nonpolymeric in nature, to form battery separator membranes of low electrolytic resistance but which have the flexibility of membranes made of unmodified methyl cellulose, and which in many cases enhance flexibility over membranes made with unmodified methyl cellulose. Separator membranes for electrochemical cells comprising a cellulose ether and a modified selected from the group consisting of metallic salts of water soluble alphatic acids and their hydroxy derivatives and to electrochemical cells utilizing said membranes are described.

Pfluger, H. L.↗
NASA NTRS1982

Store separation from cavities at supersonic flight speeds

An experimental investigation has been conducted to determine the aerodynamic characteristics of a typical wing-control missile configuration during separation from a box-type cavity having depth to length ratios (D/L) ranging from 0.088 to 0.225. The cavity was located in a splitter plate that spanned the low Mach number test section of the Langley Unitary Plan Wind Tunnel. Aerodynamic characteristics are presented for Mach 2.36 and a free-stream unit Reynolds number of 2,000,000/ft. For the shallow cavity (D/L = 0.088), large interactions existed between the cavity and the flat plate flow field, which resulted in unfavorable separation characteristics for the missile model. For the deep cavity (D/L = 0.225), the flat plate flow field essentially bridged the cavity, resulting in minor interactions and favorable separation characteristics for the missile model.

Stallings, R. L., Jr.↗
NASA NTRS1982

Topology of three-dimensional separated flows

A Legendre formulation for a pattern of streamlines adjacent to a surface considered as trajectories with properties consistent with those of a constant vector field is used to develop a mathematical framework for three-dimensional separated flows. Convergence of skin-friction lines onto a particular skin-friction line originating from a particular saddle point is defined as a necessary condition for flow separation. Steady, three-dimensional flow is considered, and singular points occurring in the skin-friction lines are shown to happen where the skin friction or the surface vorticity become zero, and become nodal or saddle points. The separation initiates and continues only globally, as a mixture of an infinite set of friction lines, or locally, with one line. The topography of streamlines in two-dimensional sections of three-dimensional flows is discussed, and examples are provided of a round-nosed body of revolution at varying angles of attack.

Tobak, M.↗
NASA NTRS1981

Electrophoretic separation of lunar soils in a space manufacturing facility

The feasibility of electrophoretic separation of lunar soil into its mineral constituents is discussed in this paper. The process and its applicability to lunar soil separation are considered in light of the special requirements of a space manufacturing effort. Data generated in studies at NASA-Marshall Space Flight Center, which assess the efficiency of electrophoretic separation of lunar soil, are discussed and evaluated.

Dunning, J. D.↗
NASA NTRS1982

Polyvinyl alcohol membranes as alkaline battery separators

Polyvinly alcohol (PVA) cross-linked with aldehyde reagents yields membranes that demonstrate properties that make them suitable for use as alkaline battery separators. Film properties can be controlled by the choice of cross-linker, cross-link density and the method of cross-linking. Three methods of cross-linking and their effects on film properties are discussed. Film properties can also be modified by using a copolymer of vinyl alcohol and acrylic acid as the base for the separator and cross-linking it similarly to the PVA. Fillers can be incorporated into the films to further modify film properties. Results of separator screening tests and cell tests for several variations of PBA films are discussed.

Sheibley, D. W.↗
NASA NTRS1982

An experimental documentation of a separated trailing-edge flow at a transonic Mach number

A detailed experiment on the separated flow field at a sharp trailing edge is described and documented. The separated flow is a result of sustained adverse pressure gradients. The experiment was conducted using an elongated airfoil-like model at a transonic Mach number and at a high Reynolds number of practical interest. Measurements made include surface pressures and detailed mean and turbulence flow quantities in the region just upstream of separation to downstream into the near-wake, following wake closure. The data obtained are presented mostly in tabular form. These data are of sufficient quality and detail to be useful as a test case for evaluating turbulence models and calculation methods.

Viswanath, P. R.↗
NASA NTRS1983

Dynamic Distortion in a Short S-Shaped Subsonic Diffuser with Flow Separation

An experimental investigation of the time varying distortion at the diffuser exit of a subscale HiMAT forebody and inlet was conducted at Mach 0.9 in the Lewis 8 by 6 foot Supersonic Wind Tunnel. A transitory separation was detected within the subsonic diffuser. Vortex generators were installed to eliminate the flow separation. Results from a study of the instantaneous pressure variations at the diffuser exit are presented. The time unsteady total pressures at the diffuser exit are computer interpolated and presented in the form of a movie showing the transitory separation. Limited data showing the instantaneous distortion levels is also presented.

Stumpf, R.↗
NASA NTRS1983

Effects of flow separation and cove leakage on pressure and heat-transfer distributions along a wing-cove-elevon configuration at Mach 6.9

External and internal pressure and cold-wall heating-rate distributions were obtained in hypersonic flow on a full-scale heat-sink representation of the space shuttle orbiter wing-elevon-cove configuration in an effort to define effects of flow separation on cove aerothermal environment as a function of cove seal leak area, ramp angle, and free-stream unit Reynolds number. Average free-stream Mach number from all tests was 6.9; average total temperature from all tests was 3360 R; free-stream dynamic pressure ranged from about 2 to 9 psi; and wing angle of attack was 5 deg (flow compression). For transitional and turbulent flow separation, increasing cove leakage progressively increased heating rates in the cove. When ingested mass flow was sufficient to force large reductions in extent of separation, increasing cove leakage reduced heating rates in the cove to those for laminar attached flow. Cove heating-rate distributions calculated with a method that assumed laminar developing channel flow agreed with experimentally obtained distributions within root-mean-square differences that varied between 11 and 36 percent where cove walls were parallel for leak areas of 50 and 100 percent.

Deveikis, W. D.↗
NASA NTRS1983

Flow processes in overexpanded chemical rocket nozzles. Part 3: Methods for the aimed flow separation and side load reduction

Methods aimed at reduction of overexpansion and side load resulting from asymmetric flow separation for rocket nozzles with a high opening ratio are described. The methods employ additional measures for nozzles with a fixed opening ratio. The flow separation can be controlled by several types of nozzle inserts, the properties of which are discussed. Side loads and overexpansion can be reduced by adapting the shape of the nozzle and taking other additional measures for controlled separation of the boundary layer, such as trip wires.

Schmucker, R. H.↗
NASA NTRS1983

New considerations on scale extrapolation of wing pressure distributions affected by transonic shock-induced separations

Use of this analytical parameter, it is shown, highlights the distinction between cases which are dominated by trailing-edge separation, and those for which separation at the shock foot is dominant. Use of the analytical parameter and the distinction noted above greatly improves the correlation of separation data and the extrapolation of wind tunnel data to flight conditions.

Kahn, M. M. S.↗
NASA NTRS1982

Multibeam single frequency synthetic aperture radar processor for imaging separate range swaths

A single-frequency multibeam synthetic aperture radar for large swath imaging is disclosed. Each beam illuminates a separate ""footprint'' (i.e., range and azimuth interval). The distinct azimuth intervals for the separate beams produce a distinct Doppler frequency spectrum for each beam. After range correlation of raw data, an optical processor develops image data for the different beams by spatially separating the beams to place each beam of different Doppler frequency spectrum in a different location in the frequency plane as well as the imaging plane of the optical processor. Selection of a beam for imaging may be made in the frequency plane by adjusting the position of an aperture, or in the image plane by adjusting the position of a slit. The raw data may also be processed in digital form in an analogous manner.

Jain, A.↗
NASA NTRS1982

A two-dimensional phase separation on the spherical surface of the metallic glass Au55Pb22.5Sb22.5

Recent experiments indicate that a phase separation in a spherical sample of the metallic glass Au55Pb22.5Sb22.5 occurs near the surface of the sphere. This strongly suggests either a contribution of surface-free energy to the decomposition process or a possible influence of near surface impurities absorbed during synthesis of the sphere. The surface phase separation has been studied as a function of cooling rate of the sphere. At high cooling rates (small sphere sizes), the surface separation disappears altogether suggesting that the surface of the parent liquid droplet is initially homogeneous.

Lee, M. C.↗
NASA NTRS1983

Calculation of symmetric vortex separation affecting subsonic bodies at high incidence

A method for calculating the longitudinal aerodynamic coefficients and the pressure distributions on a body at reasonably high angles of attack is presented. The body is represented by a combination of source elements and vortex-lattice elements, including separation of the vortices at increasing angles of attack. The method is self-consistent in that the body and the separated vortex wake are treated as an integrated interacting system. The location of the separation line can be included as an arbitrary input from experimental data or can be evaluated approximately by a pressure-dependent criterion. Calculated values of the aerodynamic coefficients and pressure distributions on cone-cylinder and ogive-cylinder bodies compare well, qualitatively and quantitatively, with experimental data, including simulation of the dependence on Reynolds number.

Almosnino, D.↗