Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “secondary phases”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

A theoretical evaluation of aluminum gel propellant two-phase flow losses on vehicle performance

A one-dimensional model of a hydrocarbon/Al/O2(gaseous) fueled rocket combustion chamber was developed to study secondary atomization effects on propellant combustion. This chamber model was coupled with a two dimensional, two-phase flow nozzle code to estimate the two-phase flow losses associated with solid combustion products. Results indicate that moderate secondary atomization significantly reduces propellant burnout distance and Al2O3 particle size; however, secondary atomization provides only moderate decreases in two-phase flow induced I(sub sp) losses. Despite these two-phase flow losses, a simple mission study indicates that aluminum gel propellants may permit a greater maximum payload than the hydrocarbon/O2 bi-propellant combination for a vehicle of fixed propellant volume. Secondary atomization was also found to reduce radiation losses from the solid combustion products to the chamber walls, primarily through reductions in propellant burnout distance.

Mueller, Donn C.↗

Hydroxymethanesulfonate (HMS) Formation during Summertime Fog in an Arctic Oil Field

Hydroxymethanesulfonate (HMS) is produced in the aqueous-phase reaction of formaldehyde (HCHO) and sulfur dioxide (SO 2 ) and has been proposed as a significant contributor to midlatitude wintertime pollution events. In this work, we report HMS detection within submicrometer atmospheric aerosols during frequent late summer, regional fog events in an Arctic oil field. The number fraction of individual particles containing HMS increased during fog periods, consistent with aqueous-phase formation. The single-particle mass spectra showed the primary particle signature (oil field emissions), plus secondary oxidized organics and sulfate, consistent with aqueous-phase processing. HMS mass concentrations ranged from below the ion chromatography limit of detection (0.3 ng/m 3 ) to 1.6 ng/m 3 , with sulfate concentrations of 37-222 ng/m 3 . HCHO and SO 2 measurements suggest that the fog HMS production rate is ~10 times higher in the oil fields than in the upwind Beaufort Sea. Aqueous-phase reactions of local oil field emissions during frequent summertime regional fog events likely have downwind impacts on Arctic aerosol composition. The potential for fog-based HMS production was estimated to be an order of magnitude higher in Fairbanks and Anchorage, AK, than in the oil fields and may explain the missing organosulfate source contributing to Fairbanks air quality.

54 ENVIRONMENTAL SCIENCES↗

On the efficacy of post-build thermomechanical treatments to improve properties of Zirconium fabricated using ultrasonic additive manufacturing

Here, hot-isostatic pressing has been applied to Zirconium plate fabricated using the ultrasonic additive manufacturing (UAM) technique to enhance interfacial bond quality. Specimens heated to 800 C for 1 h at 100 MPa pressure showed grain growth across many prior foil-to-foil interfaces, thereby increasing foil adhesion. In addition to the material softening induced by a loss of Hall-Petch strengthening, premature failure of specimens loaded parallel to the build direction was observed. Premature specimen failure was attributed to the local delamination at prior foil-to-foil boundaries where grain growth was pinned by Ti impurities introduced during the UAM process via the interaction between a Ti-alloy buffer foil and the welded Zr-foils underneath. In addition, the presence of Ti along select foil interfaces resulted in the nucleation and growth of secondary (Zr,Ti)(Fe,Cr) laves phases during higher-temperature thermomechanical processing. Using a combination of micro-scale X-ray computed tomography, fractography, and in-situ digital image correlation, the effect of defects along prior foil-to-foil boundaries was revealed as delamination-assisted plasticity accelerated specimen failure in preferred tensile orientations. These findings underscore the importance of impurity control when optimizing weld quality of higher-strength material systems using ultrasonic welding.

36 MATERIALS SCIENCE↗

Copernicus spectra of beta Lyrae

The observations reported were made in August and September 1973. The principal data were scans in the low resolution mode at phases nearly coincident with the two light minima. Shorter scans were obtained at the two quadrature phases. The data show that the secondary component of beta Lyrae is a hotter object than the visible B8 star. The velocity amplitude of the lines suggests that the secondary is the more massive object, by a factor of several times.

Hack, M.↗

Effects of bulk composition on production rates of cosmogenic nuclides in meteorites

The bulk chemical composition of meteorites has been suggested as a main factor influencing the production of cosmogenic nuclides. Numerical simulations with Los Alamos Monte Carlo production and transport codes were done for Ne-21/Ne-22 ratios and Ar-38 production rates in meteorites with a wide range of compositions. The calculations show that an enhanced flux of low-energy secondary particles in metal-rich phases is the essential key for the explanation of experimentally observed differences in nuclide production processes in various meteorite classes.

Masarik, Jozef↗

Coronagraphic Wavefront Control for the ATLAST-9.2m Telescope

The Advanced Technology for Large Aperture Space Telescope (ATLAST) concept was assessed as one of the NASA Astrophysics Strategic Mission Concepts (ASMC) studies. Herein we discuss the 9.2-meter diameter segmented aperture version and its wavefront sensing and control (WFSC) with regards to coronagraphic detection and spectroscopic characterization of exoplanets. The WFSC would consist of at least two levels of sensing and control: (i) an outer coarser level of sensing and control to phase and control the segments and secondary mirror in a manner similar to the James Webb Space Telescope but operating at higher temporal bandwidth, and (ii) an inner, coronagraphic instrument based, fine level of sensing and control for both amplitude and wavefront errors operating at higher temporal bandwidths. The outer loop would control rigid-body actuators on the primary and secondary mirrors while the inner loop would control one or more segmented deformable mirror to suppress the starlight within the coronagraphic field-of view. Herein we discuss the visible nulling coronagraph (VNC) and the requirements it levies on wavefront sensing and control and show the results of closed-loop simulations to assess performance and evaluate the trade space of system level stability versus control bandwidth.

Lyon, RIchard G.↗

Parasitic Interference in Nulling Interferometry

Nulling interferometry aims to detect faint objects close to bright stars. Its principle is to produce a destructive interference along the line of sight so that the stellar flux is rejected, while the flux of the off-axis source can be transmitted. In practice, various instrumental perturbations can degrade the nulling performance. Any imperfection in phase, amplitude or polarization produces a spurious flux that leaks to the interferometer output and corrupts the transmitted off-axis flux. One of these instrumental perturbations is the crosstalk phenomenon, which occurs because of multiple parasitic reflections inside transmitting optics, and/or diffraction effects related to beam propagation along finite size optics. It can include a crosstalk of a beam with itself, and a mutual crosstalk between different beams. This can create a parasitic interference pattern, which degrades the intrinsic transmission map - or intensity response - of the interferometer. In this context, we describe how this instrumental effect impairs the performance of a Bracewell interferometer. A simple formalism is developed to derive the corresponding modified intensity response of the interferometer, as a function of the two parameters of interest: the crosstalk level (or contamination rate) and the phase shift between the primary and secondary - parasitic - beams. We then apply our mathematical approach to a few scientific cases, both analytically and using the GENIESIM simulation software, adapted to handle coherent crosstalk. Our results show that a coherent crosstalk level of about 1 per cent implies a 20 per cent drop of the signal-to-noise ratio at most. Careful attention should thus be paid to reduce the crosstalk level inside an interferometric instrument and ensure an instrumental stability that provides the necessary sensitivity through calibration procedures.

circumstellar matter↗

Fine-Grained, Spinel-Rich Ca-Al-Rich Inclusions From The Reduced CV3 Chondrite Efremovka: A Genetic Link To Wark-Lovering Rims?

Fine-grained, spinel-rich Ca-Al-rich inclusions (FGIs) in carbonaceous chondrites, mostly CV3 chondrites, are interpreted as aggregates of nebular gas-solid condensates that escaped significant melting [1]. Multiple lines of evidence suggest a condensation origin for FGIs, including their layered structures and irregular shapes and the fine grain size of numerous spinel-cored nodules [e.g., 2,3], and the distinctive volatility-fractionated group II rare earth element patterns of bulk inclusions and their mineral constituents [e.g., 4,5]. The origin and nature of FGIs are poorly constrained because of their fine grain sizes and intimate intergrowths of refractory phases, combined with their susceptibility to secondary parent body alteration processes, making detailed mineralogical and petrologic characterizations difficult using scanning electron microscope (SEM) and electron microprobe techniques. In this study, we present preliminary transmission electron microscope (TEM) analyses of pristine FGIs from the reduced CV3 chondrite Efremovka in order to provide the detailed characterization of their micrometer- to nanometer-scale textures and chemical compositions. Our goals are to better understand the formation processes and conditions of FGIs in the early solar nebula and to explore their possible genetic relationship with other early-formed refractory inclusions and their rims.

Keller, L. P.↗

Arctic Sea Ice Export Through Fram Strait and Atmospheric Planetary Waves

A link is found between the variability of Arctic sea ice export through Ram Strait and the phase of the longest atmospheric planetary wave (zonal wave 1) in SLP for the period 1958-1997. Previous studies have identified a link between From Strait ice export and the North Atlantic Oscillation (NAO), but this link has been described as unstable because of a lack of consistency over time scales longer than the last two decades. Inconsistent and low correlations are also found between From Strait ice export and the Arctic Oscillation (AD) index. This paper shows that the phase of zonal wave 1 explains 60% - 70% of the simulated From Strait ice export variance over the Goodyear period 1958 - 1997. Unlike the NAB and AD links, these high variances are consistent for both the first and second halves of the Goodyear period. This consistency is attributed to the sensitivity of the wave I phase at high latitudes to the presence of secondary low pressure systems in the Barents Sea that serve to drive sea ice southward through From Strait. These results provide further evidence that the phase of zonal wave 1 in SLP at high latitudes drives regional as well as hemispheric low frequency Arctic Ocean and sea ice variability.

Cavalieri, Donald J.↗

Preliminary analysis of amplitude and phase fluctuations in the JAPE multiple tone data to distances of 500 meters

The JAPE short range data provide a good opportunity for studying phase and amplitude fluctuations of acoustic signals in the atmosphere over distances of several hundred meters. Several factors contribute to the usefulness of these data: extensive meteorological measurements were made, controlled sources were used, the data were recorded with a high dynamic range digital system that preserved phase information and a significant number of measurement points were obtained allowing both longitudinal and transverse studies. Further, Michigan Tech, in cooperation with the U.S. Army TARDEC, has developed phase tracking algorithms for studying vehicle acoustic signals. These techniques provide an excellent tool for analyzing the amplitude and phase fluctuations of the JAPE data. The results of studies such as those reported here have application at several levels: the mechanisms of signal amplitude and phase fluctuations in propagating acoustic signals are not well understood nor are the mathematical models highly developed, acoustic arrays depend strongly on signal coherence and signal amplitude stability in order to perform to their design specifications and active noise control implementation in regions considerably removed from the primary and secondary sources depends upon signal amplitude and phase stability. Work reported here is preliminary in nature but it does indicate the utility of the phase tracking and amplitude detection algorithms. The results obtained indicate that the phase fluctuations of the JAPE continuous multiple tone data (simultaneous transmission of 80, 200 and 500 Hz) are in general agreement with existing theories but the amplitude fluctuations are seen to be less well behaved and show less consistency.

Rogers, James↗

20-GHz phased-array-fed antennas utilizing distributed MMIC modules

The feasibility of phased-array-fed dual-reflector systems with distributed power and phase control, and utilizing monolithic microwave integrated circuit modules, is demonstrated. Secondary radiation patterns for various antenna configurations, calculated using a method in which the phased array for each scanning direction is simulated by a fictitious point source, are computed to determine the achievable EIRP levels, sidelobe isolation, and cross-polarization isolation. The focal-region-fed Cassegrain reflector was found to be best suited for fixed multiple beam applications, while the phased-array-fed dual-reflector configuration was selected for multiple scanning beams. Key elements of the phased-array design including a radiating square horn and a square orthomode transducer were fabricated and tested.

Sorbello, R. M.↗

Aqueous Alteration and Hydrogen Generation on Parent Bodies of Unequilibrated Ordinary Chondrites: Thermodynamic Modeling for the Semarkona Composition

Ordinary chondrites are the most abundant class of meteorites that could represent rocky parts of solar system bodies. However, even the most primitive unequilibrated ordinary chondrites (UOC) reveal signs of mild alteration that affected the matrix and peripheral zones of chondrules. Major chemical changes include oxidation of kamacite, alteration of glass, removal of alkalis, Al, and Si from chondrules, and formation of phases enriched in halogens, alkalis, and hydrogen. Secondary mineralogical changes include formation of magnetite, ferrous olivine, fayalite, pentlandite, awaruite, smectites, phosphates, carbonates, and carbides. Aqueous alteration is consistent with the oxygen isotope data for magnetite. The presence of secondary magnetite, Ni-rich metal alloys, and ferrous silicates in UOC implies that H2O was the oxidizing agent. However, oxidation by H2O means that H2 is produced in each oxidative pathway. In turn, production of H2, and its redistribution and possible escape should have affected total pressure, as well as the oxidation state of gas, aqueous and mineral phases in the parent body. Here we use equilibrium thermodynamic modeling to explore water-rock reactions in UOC. The chemical composition of gas, aqueous, and mineral phases is considered.

Zolotov, M. Y.↗

Observations of a Two-Stage Solar Eruptive Event (SEE): Evidence for Secondary Heating

We present RHESSI, SDO/AIA, SOHO/LASCO, STEREO, and GOES observations of a partially occulted solar eruptive event (SEE) that occurred at the South-West limb on 8 March, 2011. The GOES X-ray light curve shows two peaks separated by almost two hours that we interpret as two stages of a single event associated with the delayed eruption of a CME. A hot flux rope formed during the first stage and continued expanding and rising throughout the event. The speed of the flux rope decreased from approx.120 to 14 km/s during the decay phase of the first stage and increased again during the second stage to become the CME with a speed of approx.516 km/s. RHESSI and GOES data analyses show that the plasma temperature reached over 20 MK in the first stage, then decreased to approx.10 MK and increased to 15 MK in the second stage. This event provides clear evidence for a secondary heating phase. The enhanced EUV and X-ray emission came from the high corona ( approx.60 arcsec above the limb) in the second stage, approx.40 arcsec higher than the site of the initial flare emission. STEREO-A on-disk observations indicate that the post-flare loops during this stage were of larger scale sizes and spatially distinct from those in the first stage.

Su, Yang↗

Gamma ray emission from radio pulsars

While the proposed research received partial funding under this grant, during the term of support substantial progress was made on the development of a new model for the emission of gamma-rays from isolated rotation-powered pulsars. In phase one of the work, we showed how a modified version of the 'outer gap' model of pulsar emission could reproduce the double peaked profiles seen in CGRO pulsar observations. This work also demonstrated the spectrum of gap radiation varies significantly with position in the magnetosphere, and produced approximate computations of the emission from outer magnetosphere gap zones, including primary curvature radiation, gamma - gamma pair production and synchrotron radiation and inverse Compton scattering by the resulting secondary particles. This work was followed in phase two by a more complete treatment of the geometry of the radiation zone, and improved connections with observations at other wavelengths.

Romani, Roger W.↗

Energetic Processing of Interstellar Ices: A Route to Complexity

More than 140 gas-phase molecules have been detected in the interstellar (IS) medium or in circumstellar environments including inorganics, organics, ions, and radicals. The significant abundance of large, complex organic molecules, and families of isomers in these regions makes the origin and formation history of these species the subject of debate. Observationally determined condensed-phase species are H2O, CO, CO2, NH3 and CH30H, with CH4, HCOOH, OCS, OCN-, H2CO and NH4(+) present at trace levels. These ices can undergo energetic processing with cosmic rays or far-UV photons to form larger complex organics with abundance levels that make them undetectable in icy mantles. Once warmed, however, it is likely that these complex species would enter the gas-phase where they might be detected by Herschel or Alma. Understanding the role of radiation chemistry and thermal processing of ices and identifying new products are the goals of our laboratory research. In the Cosmic lee Laboratory at NASA Goddard Space Plight Center, we can study both the photo-and radiation chemistries of ices from 8 -- 300 K. Using dear- and mid-IR spectroscopy we can follow the destruction of primary molecules and the formation of radicals and secondary products as a function of energetic processing. During warming we can monitor the trapping of species and the results of any thermal chemistry. An overview of recent and past work will focus on complex secondary radiation products from small condensed-phase IS species. Likely reactions include dimerization, isomerization, H-addition and H-elimination. Another focus of our work is the development of reaction schemes for the formation of complex molecules and the use of such schemes to predict new molecules awaiting detection by Herschel and Alma.

Moore, Marla H.↗

Analysis and Modeling of a Two-Phase Jet Pump of a Thermal Management System for Aerospace Applications

Jet pumps are devices capable of pumping fluids to a higher pressure by inducing the motion of a secondary fluid employing a high speed primary fluid. The main components of a jet pump are a primary nozzle, secondary fluid injectors, a mixing chamber, a throat, and a diffuser. The work described in this paper models the flow of a two-phase primary fluid inducing a secondary liquid (saturated or subcooled) injected into the jet pump mixing chamber. The model is capable of accounting for phase transformations due to compression, expansion, and mixing. The model is also capable of incorporating the effects of the temperature and pressure dependency in the analysis. The approach adopted utilizes an isentropic constant pressure mixing in the mixing chamber and at times employs iterative techniques to determine the flow conditions in the different parts of the jet pump.

Sherif, S.A.↗

Eclipse mapping of the accreting magnetic white dwarf in DP Leonis with HST

We present time-resolved ultraviolet spectrophotometry of the AM Her system DP Leo (E1114+182), obtained with the Faint Object Spectrograph on the Hubble Space Telescope (HST) in 1991 October. During this period, the binary was in a low-activity state. Complementary optical spectrophotometry and spectopolarimetry were obtained in 1991 October and December, as well as in 1992 April when the object had entered a high-accretion state. The HST spectrophotometry reveals two UV-emitting components-a hot 'spot' (T approximately 50,000 K, very approximately) near the magnetic pole into which most material is accreted, and the white dwarf photosphere (T approximately 16,000 K), which dominates when the spot is not in view. Both components appear as rapid and gradual components in the ingress and egress of secondary eclipse, the latter indicating a normal white dwarf radius of 0.8 x 10(exp 9) cm. The fractional area of the spot (f approximately 0.006) implied by the eclipse data is consistent with the observed UV flux and a minimum distance of 380 pc is similar to those found in other AM Her systems. The nearly identical eclipse light curves from the HST and earlier optical observations imply that the UV-emitting reprocessing area is not more extended than the cyclotron source of optical radiation in the accretion funnel. The timing of the onset of the bright phase indicated that the spot leads the secondary in orbital azimuth by approximately 3 deg.

Stockman, H. S.↗

Mineralogical, Spectral, and Compositional Changes During Heating of Hydrous Carbonaceous Chondrites

Hydrous carbonaceous chondrites experienced hydration and subsequent dehydration by heating, which resulted in a variety of mineralogical and spectral features [e. g., 1-6]. The degree of heating is classified according to heating stage (HS) II to IV based on mineralogy of phyllosilicates [2], because they change, with elevating temperature, to poorly crystal-line phases and subsequently to aggregates of small secondary anhydrous silicates of mainly olivine. Heating of hydrous carbonaceous chondrites also causes spectral changes and volatile loss [3-6]. Experimental heating of Murchison CM chondrite showed flattening of whole visible-near infrared spectra, especially weakening of the 3μm band strength [1, 4, 7]. In order to understand mineralogical, spectral, and compositional changes during heating of hydrous carbonaceous chondrites, we have carried out systematic investigation of mineralogy, reflectance spectra, and volatile composition of hydrated and dehydrated carbonaceous chondrites as well as experimentally-heated hydrous carbonaceous chondrites. In addition, we investigated reflectance spectra of tochilinite that is a major phase of CM chondrites and has a low dehydration temperature (~250degC).

Nakamura, T.↗