Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “science for development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

The art and science of rotary wing data correlation

This paper presents an overview of the correlation of helicopter rotor performance and loads data from various tests and analyses. Information is included from U.S. Army-sponsored tests conducted by Bell Helicopter Company for free-flight full-scale tests in the NASA-Ames 40 x 80 wind tunnel, one-fifth scale tests in the NASA-Langley Transonic Dynamics Tunnel, and small-scale tests of a rotor in air. These test data are compared with each other, where appropriate, and with calculated results. Typical examples illustrate the state of the art for correlation and indicate anomalies encountered. It is concluded that a procedure using theoretical analyses to aid in interpretation and evaluation of test results is essential to developing a science of correlation.

Drees, J. M.↗

DIRT/3D: 3D root phenotyping for field-grown maize ( Zea mays )

The development of crops with deeper roots holds substantial promise to mitigate the consequences of climate change. Deeper roots are an essential factor to improve water uptake as a way to enhance crop resilience to drought, to increase nitrogen capture, to reduce fertilizer inputs, and to increase carbon sequestration from the atmosphere to improve soil organic fertility. A major bottleneck to achieving these improvements is high-throughput phenotyping to quantify root phenotypes of field-grown roots. We address this bottleneck with Digital Imaging of Root Traits (DIRT)/3D, an image-based 3D root phenotyping platform, which measures 18 architecture traits from mature field-grown maize (Zea mays) root crowns (RCs) excavated with the Shovelomics technique. DIRT/3D reliably computed all 18 traits, including distance between whorls and the number, angles, and diameters of nodal roots, on a test panel of 12 contrasting maize genotypes. The computed results were validated through comparison with manual measurements. Overall, we observed a coefficient of determination of r 2 > 0.84 and a high broad-sense heritability of H$_{mean}^{2}$ < 0.6 for all but one trait. The average values of the 18 traits and a developed descriptor to characterize complete root architecture distinguished all genotypes. DIRT/3D is a step toward automated quantification of highly occluded maize RCs. Therefore, DIRT/3D supports breeders and root biologists in improving carbon sequestration and food security in the face of the adverse effects of climate change.

59 BASIC BIOLOGICAL SCIENCES↗

Rapid Development of Instrument Thermal Models: Perspectives and Guidelines from NASA Goddard’s Instrument Design Laboratory

The Instrument Design Laboratory (IDL), part of NASA Goddard Space Flight Center’s Integrated Design Center (IDC), is a concurrent and collaborative environment which allows for rapid development of science instrumentation concepts within the span of less than two weeks. Science goals set by a Principal Investigator from government, industry or academia are translated into engineering requirements, from which a team of engineers spanning multiple disciplines use an established study process and a suite of analysis tools to work towards an instrument point design. As part of this process, a staff thermal engineer is tasked with designing a thermal control system which meets all incoming thermal requirements, while iterating real-time with other subsystems to ensure compatibility and functionality as a completed system. Thermal engineers on spaceflight projects typically have weeks or months to develop thermal models. However, the severe time limitation in this conceptual study setting makes thermal design particularly difficult, as rapid thermal modeling solely over the span of a few days is required to develop the instrument thermal design and understand the performance over its intended mission, especially if the instrument concept contains multiple thermal challenges such as dynamic environments or high heat dissipating components. In this paper, the authors provide a condensed guide for the most efficient ways to develop thermal models and conduct thermal analysis within the span of one-to-two weeks, as informed by decades of design experience and best practices in the IDL. The authors also focus on quick methods for determining worst-case thermal environments, deciding which modeling details are essential at this early phase, and quantifying the engineering resources necessary for thermal control. This paper concludes with specific thermal design tips for different instrument types across the electromagnetic spectrum.

Kan Yang↗

The role of international collaboration in the United States geologic disposal research program

Abstract. More than a decade ago, the United States disposal program discontinued all research activities focused on the unsaturated fractured tuff formation at Yucca Mountain as the geologic disposal site for spent fuel and high-level radioactive waste. A new research and development (R&D) program was initiated to provide a sound technical basis for alternative disposal options across clay, crystalline, and salt rocks. The goals of this broad program were (and still are) to (1) increase confidence in the robustness of generic disposal concepts, (2) develop the science and engineering tools needed to support disposal concept implementation, and (3) conduct R&D on the direct disposal of existing dual-purpose (storage and transportation) canisters. Recognizing the benefits of international collaboration toward the common goal of safely and efficiently managing the back end of the nuclear fuel cycle, the program emphasized international cooperation as an effective strategy for sharing information and knowledge. In a multi-laboratory effort coordinated by Lawrence Berkeley National Laboratory, the United States Department of Energy (DOE) program established formal and informal cooperation partnerships with several international initiatives and institutions and developed a number of collaborative R&D activities in important research areas, such as engineered barrier integrity, near-field perturbations, radionuclide transport, performance assessment, and methods for characterization and monitoring of engineered and natural barriers. This presentation gives an overview of these R&D activities, with a specific focus on activities that improve our current understanding of the coupled thermal–hydrological–mechanical–chemical (THMC) processes occurring in engineered and natural barriers. We start with a brief review of selected international collaboration initiatives and then describe a few specific collaboration projects. We focus specifically on such studies that use experimental data sets provided by international research cooperation for joint modeling work to increase confidence in performance-relevant predictions of coupled processes. Overall, the focus on international collaboration has allowed deep engagement of US researchers with the international waste management R&D community in terms of best practices, new scientific advances, state-of-the-art simulation tools, new monitoring and performance confirmation approaches, and lessons learned. The joint R&D with international researchers, worldwide sharing of knowledge and experience, and access to relevant data and experiments from a variety of host rocks have helped our researchers to significantly improve their understanding of the current technical basis for disposal in a range of potential host rock environments. International collaboration also provides ample opportunity for training and educating junior staff that are well suited to move the United States disposal research program forward into the next decades, a promising avenue for developing a next-generation workforce of disposal scientists.

Birkholzer, Jens T.↗

Electronic waste management approaches: An overview

Highlights: ► Human toxicity of hazardous substances in e-waste. ► Environmental impacts of e-waste from disposal processes. ► Life Cycle Assessment (LCA), Material Flow Analysis (MFA), Multi Criteria Analysis (MCA) and Extended Producer Responsibility (EPR) to and solve e-waste problems. ► Key issues relating to tools managing e-waste for sustainable e-waste management. - Abstract: Electronic waste (e-waste) is one of the fastest-growing pollution problems worldwide given the presence if a variety of toxic substances which can contaminate the environment and threaten human health, if disposal protocols are not meticulously managed. This paper presents an overview of toxic substances present in e-waste, their potential environmental and human health impacts together with management strategies currently being used in certain countries. Several tools including Life Cycle Assessment (LCA), Material Flow Analysis (MFA), Multi Criteria Analysis (MCA) and Extended Producer Responsibility (EPR) have been developed to manage e-wastes especially in developed countries. The key to success in terms of e-waste management is to develop eco-design devices, properly collect e-waste, recover and recycle material by safe methods, dispose of e-waste by suitable techniques, forbid the transfer of used electronic devices to developing countries, and raise awareness of the impact of e-waste. No single tool is adequate but together they can complement each other to solve this issue. A national scheme such as EPR is a good policy in solving the growing e-waste problems.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

NASA’s Satellite Needs Working Group Management Office: Developing Solutions in an Agile, Open Science Environment

Every two years, the National Aeronautics and Space Administration (NASA) leads an assessment of U.S. Federal civilian agency Earth observation needs submitted through the Satellite Needs Working Group (SNWG) survey. In four survey cycles beginning in 2016, nearly 400 high-priority satellite needs have been identified, spanning Earth Science and representing a wide variety of potential applications for Earth observation data. During each assessment cycle, new data products and services (i.e., solutions) that meet the needs of multiple agencies are identified and proposed for funding. The majority of solutions being developed or currently operational are global in scope, including harmonized land surface reflectance data from Landsat and Sentinel-2; composites of cloud properties derived from MODIS, VIIRS, and five geostationary satellites; dynamic surface water extent and land surface disturbance products derived from multiple optical and radar missions; a suite of low-latency products from the ICESat-2 mission; and a soil moisture product derived from the upcoming NISAR mission. The SNWG Management Office, within the Earth Action element of NASA’s Earth Science Division, manages both the biennial SNWG survey assessment and the development of solutions starting at full capacity with the 2020 cycle. Each solution project is required to align with NASA’s open science policy, including developing source code in an open code repository, having an open-source software license, and making all data freely available via NASA’s Earthdata website. The presentation will include an overview of the SNWG process, its emphasis on open science, and highlight several operational solutions freely available to the global research and applications communities.

Katrina Virts↗

Optical Detection of Lightning from Space

Optical sensors have been developed to detect lightning from space during both day and night. These sensors have been fielded in two existing satellite missions and may be included on a third mission in 2002. Satellite-hosted, optically-based lightning detection offers three unique capabilities: (1) the ability to reliably detect lightning over large, often remote, spatial regions, (2) the ability to sample all (IC and CG) lightning, and (3) the ability to detect lightning with uniform (i.e., not range-dependent) sensitivity or detection efficiency. These represent significant departures from conventional RF-based detection techniques, which typically have strong range dependencies (biases) or range limitations in their detection capabilities. The atmospheric electricity team of the NASA Marshall Space Flight Center's Global Hydrology and Climate Center has implemented a three-step satellite lightning research program which includes three phases: proof-of-concept/climatology, science algorithm development, and operational application. The first instrument in the program, the Optical Transient Detector (OTD), is deployed on a low-earth orbit (LEO) satellite with near-polar inclination, yielding global coverage. The sensor has a 1300 x 1300 sq km field of view (FOV), moderate detection efficiency, moderate localization accuracy, and little data bias. The OTD is a proof-of-concept instrument and its mission is primarily a global lightning climatology. The limited spatial accuracy of this instrument makes it suboptimal for use in case studies, although significant science knowledge has been gained from the instrument as deployed.

Boccippio, Dennis J.↗

SPHERES National Lab Facility

SPHERES is a facility of the ISS National Laboratory with three IVA nano-satellites designed and delivered by MIT to research estimation, control, and autonomy algorithms. Since Fall 2010, The SPHERES system is now operationally supported and managed by NASA Ames Research Center (ARC). A SPHERES Program Office was established and is located at NASA Ames Research Center. The SPHERES Program Office coordinates all SPHERES related research and STEM activities on-board the International Space Station (ISS), as well as, current and future payload development. By working aboard ISS under crew supervision, it provides a risk tolerant Test-bed Environment for Distributed Satellite Free-flying Control Algorithms. If anything goes wrong, reset and try again! NASA has made the capability available to other U.S. government agencies, schools, commercial companies and students to expand the pool of ideas for how to test and use these bowling ball-sized droids. For many of the researchers, SPHERES offers the only opportunity to do affordable on-orbit characterization of their technology in the microgravity environment. Future utilization of SPHERES as a facility will grow its capabilities as a platform for science, technology development, and education.

Free Flyer↗

The earth system Grid : enabling access to multi-model climate simulation data.

Climate scientists face a wide variety of practical problems, but there is an overarching need to efficiently access and manipulate climate model data. Increasingly, for example, researchers must assemble and analyze large datasets that are archived in different formats on disparate platforms, and extract portions of datasets to compute statistical or diagnostic metrics 'in place'. The need for a common virtual environment in which to access both climate model datasets and analysis tools is therefore keenly felt. The software infrastructure to support such an environment must therefore not only provide ready access to climate data, but also must facilitate the use of visualization software, diagnostic algorithms, and related resources. To this end, the Earth System Grid Center for Enabling Technologies (ESG-CET) was established in 2006 by the Scientific Discovery through Advanced Computing (SciDAC)-2 program of the U.S. Department of Energy (DOE) through the Office of Advanced Scientific Computing Research (OASCR) and the Office Biological and Environmental Research (OBER) within the Office of Science (Fig. 1). ESG-CET is working to advance climate science by developing computational resources for accessing and managing model data that are physically located in distributed multiplatform archives.

54 ENVIRONMENTAL SCIENCES↗

Cross-boundary collaboration in waste management research: A network analysis

Highlights: • No core scholars stood out from cross-boundary research collaboration networks. • No institution occupied a critical position. • Old-line developed countries stay in the center of research than developing ones. • More research has focused on “hard” technologies than “soft” measures. • CBRC from different perspectives were limited but increasing steadily over time. - Abstract: This paper aims to illustrate the cross-boundary research collaboration (CBRC) landscape of waste management (WM) by various collaboration networks. Through a set of rigorous procedures, a total of 15,396 research papers were extracted from eight subject-related journals published between 1981 and 2016. The authors utilized CiteSpace, a Java programme that helps visualize and dissect patterns in scientific literature, to evaluate the content through individual, institutional, national, and disciplinary perspectives. The evaluations of three former perspectives revealed a steady rise in CBRC within WM over the last thirty-five years, although the overall intensities proved fairly low. Inter-individual collaboration groups were limited to their respective regions and only loosely connected, but as more and more academic institutions and universities engaged in WM research, the number and quality of the collaborations increased. Developed countries, chiefly in North America and Western Europe, comprised the bulk of the WM research, whilst the mounting contributions from developing countries, China in particular, forecasts greater diversity in the future. The analysis also suggested that the intensity of the interdisciplinary collaboration network declined slightly, however, the intensity proved low to begin with. Previous WM research focused more on “hard” technologies than “soft” measures. Future endeavors to encourage CBRC in WM should promote more innovative research to tackle waste challenges globally in a sustainable way.

54 ENVIRONMENTAL SCIENCES↗

Cell Population–resolved Multiomics Atlas of the Developing Lung

The lung is a vital organ that undergoes extensive morphological and functional changes during postnatal development. To disambiguate how different cell populations contribute to organ development, we performed proteomic and transcriptomic analyses of four sorted cell populations from the lung of human subjects aged 0 to 8 years-old with a focus on early life. The cell populations analyzed included epithelial, endothelial, mesenchymal, and immune cells. Our results revealed distinct molecular signatures for each of the sorted cell populations that enable the description of molecular shifts occurring in these populations during post-natal development. Here, we confirmed that the proteome of the different cell populations was distinct regardless of age and identified functions specific to each population. We identified a series of cell population protein markers, including those located at the cell surface, that show differential expression and distribution on RNA in situ hybridization and immunofluorescence imaging. We validated the spatial distribution of AT1 and endothelial cell surface markers. Temporal analyses of the proteome of each of the four populations revealed processes modulated during postnatal development and disambiguating results obtained on whole tissue proteome. Finally, the proteome was compared to a transcriptomics survey performed on the same lung samples to evaluate processes under post-transcriptional control.

59 BASIC BIOLOGICAL SCIENCES↗

Science Autonomy for Ocean Worlds Astrobiology: A Perspective

Astrobiology missions to ocean worlds in our solar system must overcome both scientific and technological challenges due to extreme temperature and radiation conditions, long communication times, and limited bandwidth. While such tools could not replace ground-based analysis by science and engineering teams, machine learning algorithms could enhance the science return of these missions through development of autonomous science capabilities. Examples of science autonomy include onboard data analysis and subsequent instrument optimization, data prioritization (for transmission), and real-time decision-making based on data analysis. Similar advances could be made to develop streamlined data processing software for rapid ground-based analyses. Here we discuss several ways machine learning and autonomy could be used for astrobiology missions, including landing site selection, prioritization and targeting of samples, classification of “features” (e.g., proposed biosignatures) and novelties (uncharacterized, “new” features, which may be of most interest to agnostic astrobiological investigations), and data transmission.

ocean worlds↗

Ferritic Alloys with Extreme Creep Resistance via Coherent Hierarchical Precipitates

There have been numerous efforts to develop creep-resistant materials strengthened by incoherent particles at high temperatures and stresses in response to future energy needs for steam turbines in thermal-power plants. However, the microstructural instability of the incoherent-particle-strengthened ferritic steels limits their application to temperatures below 900 K. Here, we report a novel ferritic alloy with the excellent creep resistance enhanced by coherent hierarchical precipitates, using the integrated experimental (transmission-electron microscopy/scanning-transmission-electron microscopy, in-situ neutron diffraction, and atom-probe tomography) and theoretical (crystal-plasticity finite-element modeling) approaches. This alloy is strengthened by nano-scaled L21-Ni2TiAl (Heusler phase)-based precipitates, which themselves contain coherent nano-scaled B2 zones. These coherent hierarchical precipitates are uniformly distributed within the Fe matrix. Our hierarchical structure material exhibits the superior creep resistance at 973 K in terms of the minimal creep rate, which is four orders of magnitude lower than that of conventional ferritic steels. These results provide a new alloy-design strategy using the novel concept of hierarchical precipitates and the fundamental science for developing creep-resistant ferritic alloys. Finally, the present research will broaden the applications of ferritic alloys to higher temperatures.

36 MATERIALS SCIENCE↗

The promotion of environmental enhancement in Strategic Environmental Assessment

This paper evaluates how the enhancement of positive environmental impacts has been considered and developed in Strategic Environmental Assessment (SEA) reports since the SEA Act in Scotland was introduced in 2005. Fifteen Environmental Reports on strategic actions prepared between 2006 and 2009 were scrutinized for this study, one of which pertained to national policy and the rest to responsible authority programmes, plans or strategies throughout Scotland. A four point scale was developed to evaluate the extent to which environmental enhancement promotion or measures were considered in the Environmental Reports: Thorough, Fair, Minimal and Absent. Results found that nine out of the 15 Environmental Reports studied were graded as 'minimal' or 'absent'. The paper concludes that in order for SEA to achieve its full potential, in addition to considering mitigation measures for negative environmental impacts, SEA practitioners and decision makers must begin to realize and exploit potential enhancement opportunities.

54 ENVIRONMENTAL SCIENCES↗

A review on technological options of waste to energy for effective management of municipal solid waste

Highlights: • The current status, options and challenges of WTE techniques were analysed. • Incineration is the most widely used WTE technology in the developed countries. • Landfilling is the most common practice of MSWM in developing countries. • Approximately 50 million tonnes of methane is emitted annually from landfills. • WTE will ensure both the energy security and environmental protection. - Abstract: Approximately one-fourth population across the world rely on traditional fuels (kerosene, natural gas, biomass residue, firewood, coal, animal dung, etc.) for domestic use despite significant socioeconomic and technological development. Fossil fuel reserves are being exploited at a very fast rate to meet the increasing energy demands, so there is a need to find alternative sources of energy before all the fossil fuel reserves are depleted. Waste to energy (WTE) can be considered as a potential alternative source of energy, which is economically viable and environmentally sustainable. The present study reviewed the current global scenario of WTE technological options (incineration, pyrolysis, gasification, anaerobic digestion, and landfilling with gas recovery) for effective energy recovery and the challenges faced by developed and developing countries. This review will provide a framework for evaluating WTE technological options based on case studies of developed and developing countries. Unsanitary landfilling is the most commonly practiced waste disposal option in the developing countries. However, developed countries have realised the potential of WTE technologies for effective municipal solid waste management (MSWM). This review will help the policy makers and the implementing authorities involved in MSWM to understand the current status, challenges and barriers for effective management of municipal solid waste. This review concluded WTE as a potential renewable source of energy, which will partly meet the energy demand and ensure effective MSWM.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

BETO 2021 Peer Review - FCIC Task 6: High Temperature Conversion

The impacts of feedstock variability on pyrolysis processes are significant but poorly defined. Current engineering designs are based on empirical guidelines, useful only over a narrow range of feedstock properties. The objectives of this project are to (1) Develop science-based knowledge of how feedstock attributes and operational parameters impact pyrolysis process reliability and product quality; and (2) Build an experimental and computational toolset that predicts these outcomes, enabling processes to optimize reliability and product quality. Biomass is a complex feedstock. Controlling for and testing the effects of individual attributes is very challenging. This project couples multiscale experimentation and modeling to accurately capture the fundamental physics and chemistry of biomass flow and conversion behavior in feeding and pyrolysis reactor operations. Our focus is on pine residue attributes – anatomical fraction (bark, needles, wood), particle morphology (size/shape distribution, density, porosity), and chemical composition (extractives, biopolymers, alkali metals) – that impact product quality for downstream catalytic upgrading. Because detailed pyrolysis product characterization is limited, cutting-edge analytical techniques are being developed to reveal impactful product attributes. The tools and knowledge developed here will enable integrated pyrolysis-based processes that are more robust, flexible, and market-responsive with respect to feedstock variability.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Accelerating Ocean-Based Renewable Energy Educational Opportunities to Achieve a Clean Energy Future

The United Nations has named 2021–2030 the Decade of Ocean Science for Sustainable Development with goals to 'strengthen the international cooperation needed to develop the scientific research and innovative technologies that can connect ocean science with the needs of society' (IOC 2019 The science we need for the ocean we want: the United Nations decade of ocean science for sustainable development (2021–2030) (Paris) p 24). Important actions that have been identified in support of sustainable development goals include capacity-building, training, and education. This includes educational opportunities for ocean-based renewable energy development in support of a healthy planet and ocean. Offshore wind is experiencing rapid development globally and, while the U.S. offshore wind market is still nascent, it is on the brink of exponential growth based on large cost reductions driven largely by European development and technology advances. Growth is also expected in wave and tidal energy with significant opportunities identified for various distributed markets through the Powering the Blue Economy™ initiative, with longer-term implications for expansion at the utility scale (LiVecchi et al 2019 Powering the blue economy; exploring opportunities for marine renewable energy in maritime markets p 207). In order to expedite progress and maximize benefits to the national, state, and local economies, these development actions will require a broad, diverse, and appropriately trained workforce. The ocean-based renewable energy workforce needs engineers and scientists to develop cost-effective technologies, as well as trade and maritime workers to eventually deploy the technologies at scale. In the United States, educational institutions, state governments, and private developers are taking action to understand job skills and capability requirements and to develop educational and training programs to meet offshore workforce needs; most are focused on offshore wind power, with gaining interest in marine energy. This article explores the workforce requirements of the growing ocean-based renewable energy industry and the current state of education and training programs to meet those requirements in order to identify gaps and make recommendations for further workforce development activities and initiatives. An international view needs to be adopted that incorporates the education and skill needs of early-stage marine energy technologies and evolving offshore wind technologies together with more market-ready offshore renewable energy markets. By accelerating educational development opportunities in ocean-based renewable energy, these growing blue economy markets can deliver significant economic and social benefits.

50 EE - Wind and Water Power Program - Water (EE-4↗

Noncontact temperature measurement: Requirements and applications for metals and alloys research

Temperature measurement is an essential capability for almost all areas of metals and alloys research. In the microgravity environment many of the science priorities that have been identified for metals and alloys also require noncontact temperature measurement capability. For example, in order to exploit the full potential of containerless processing, it is critical to have available a suitable noncontact temperature measurement system. This system is needed to track continuously the thermal history, including melt undercooling and rapid recalescence, of relatively small metal spheres during free-fall motion in drop tube systems. During containerless processing with levitation-based equipment, accurate noncontact temperature measurement is required to monitor one or more quasi-static samples with sufficient spatial and thermal resolution to follow the progress of solidification fronts originating in undercooled melts. In crystal growth, thermal migration, coarsening and other experiments high resolution thermal maps would be a valuable asset in the understanding and modeling of solidification processes, fluid flows and microstructure development. The science and applications requirements place several constraints on the spatial resolution, response time and accuracy of suitable instrumentation.

Perepezko, J. H.↗