Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “rings”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

ABUNDANCES AND DENSITY STRUCTURE OF THE INNER CIRCUMSTELLAR RING AROUND SN 1987A

We present optical spectroscopic data of the inner circumstellar ring around supernova (SN) 1987A from the Anglo-Australian Telescope and the Very Large Telescope (VLT) between {approx}1400 and {approx}5000 days post-explosion. We also assembled the available optical and near-infrared line fluxes from the literature between {approx}300 and {approx}2000 days. These line light curves were fitted with a photoionization model to determine the density structure and the elemental abundances for the inner ring. We found densities ranging from 1 x 10{sup 3} to 3 x 10{sup 4} atoms cm{sup -3} and a total mass of the ionized gas of {approx}5.8 x 10{sup -2} M {sub sun} within the inner ring. Abundances inferred from the optical and near-infrared data were also complemented with estimates of Lundqvist and Fransson based on ultraviolet lines. This way we found an He/H ratio (by number of atoms) of 0.17 {+-} 0.06 which is roughly 30% lower than previously estimated and twice the solar and the Large Magellanic Cloud (LMC) value. We found an N/O ratio of 1.5 {+-} 0.7, and the total (C+N+O)/(H+He) abundance about 1.6 times its LMC value or roughly 0.6 times the most recent solar value. An iron abundance of 0.20 {+-} 0.11 times solar was found which is within the range of the estimates for the LMC. We also present late time ({approx}5000-7500 days) line light curves of [O III], [Ne III], [Ne IV], [Ar III], [Ar IV], and [Fe VII] from observations with the VLT. We compared these with model fluxes and found that an additional 10{sup 2} atoms cm{sup -3} component was required to explain the data of the highest ionization lines. Such low-density gas is expected in the H II-region interior to the inner ring which likely extends also to larger radii at higher latitudes (out of the ring plane). At epochs later than {approx}5000 days, our models underproduce the emission of most of these lines as expected due to the contribution from the interaction of the SN ejecta with the ring.

79 ASTRONOMY AND ASTROPHYSICS↗

EVOLUTION OF A RING AROUND THE PLUTO–CHARON BINARY

We consider the formation of satellites around the Pluto–Charon binary. An early collision between the two partners likely produced the binary and a narrow ring of debris, out of which arose the moons Styx, Nix, Kerberos, and Hydra. How the satellites emerged from the compact ring is uncertain. Here we show that a particle ring spreads from physical collisions and collective gravitational scattering, similar to migration. Around a binary, these processes take place in the reference frames of “most circular” orbits, akin to circular ones in a Keplerian potential. Ring particles damp to these orbits and avoid destructive collisions. Damping and diffusion also help particles survive dynamical instabilities driven by resonances with the binary. In some situations, particles become trapped near resonances that sweep outward with the tidal evolution of the Pluto–Charon binary. With simple models and numerical experiments, we show how the Pluto–Charon impact ring may have expanded into a broad disk, out of which grew the circumbinary moons. In some scenarios, the ring can spread well beyond the orbit of Hydra, the most distant moon, to form a handful of smaller satellites. If these small moons exist, New Horizons will find them.

79 ASTRONOMY AND ASTROPHYSICS↗

ATLAS AND CATALOG OF COLLISIONAL RING GALAXIES

We present a catalog and imaging atlas of classical (collisional) RING galaxies distilled from the Arp-Madore Atlas of Southern Peculiar Galaxies and Associations and supplemented with other known RING galaxies from the published literature. The catalog lists the original host object, compiles available redshifts, and presents newly determined positions for the central (target) galaxy and its nearest companion(s). 127 collisional RING systems are illustrated and their components identified. All of the RINGS have plausible colliders identified; many are radial-velocity confirmed companions. Finally, we make note of the existence of a rare subclass of RING galaxies exemplified by AM 2136-492, double/concentric RING galaxies. These objects are predicted by numerical simulations, but they appear to be quite rare and/or short lived in nature.

79 ASTRONOMY AND ASTROPHYSICS↗

The Dam1 ring binds to the E-hook of tubulin and diffuses along the microtubule

There has been much effort in recent years aimed at understanding the molecular mechanism by which the Dam1 kinetochore complex is able to couple microtubule depolymerization to poleward movement. Both a biased diffusion and a forced walk model have been proposed, and several key functional aspects of Dam1-microtubule binding are disputed. Here, we investigate the elements involved in tubulin-Dam1 complex interactions and directly visualize Dam1 rings on microtubules in order to infer their dynamic behavior on the microtubule lattice and its likely relevance at the kinetochore. We find that the Dam1 complex has a preference for native tubulin over tubulin that is lacking its acidic C-terminal tail. Statistical mechanical analysis of images of Dam1 rings on microtubules, applied to both the distance between rings and the tilt angle of the rings with respect to the microtubule axis, supports a diffusive ring model. We also present a cryo-EM reconstruction of the Dam1 ring, likely the relevant assembly form of the complex for energy coupling during microtubule depolymerization in budding yeast. The present studies constitute a significant step forward by linking structural and biochemical observations toward a comprehensive understanding of the Dam1 complex.

59 BASIC BIOLOGICAL SCIENCES↗

The luminosity function of ringed galaxies

ABSTRACT We perform an analysis of the luminosity functions (LFs) of two types of ringed galaxies – polar-ring galaxies and collisional ring galaxies – using data from the Sloan Digital Sky Survey (SDSS). Both classes of galaxies were formed as a result of interaction with their environment and they are very rare objects. We constructed LFs of galaxies by different methods and found their approximations by the Schechter function. The luminosity functions of both types of galaxies show a systematic fall-off at low luminosities. The polar structures around bright (Mr ≤ −20m) and red (g − r > +0.8) galaxies are about twice as common as around blue ones. The LF of collisional rings is shifted towards brighter luminosities compared to polar-ring galaxies. We analysed the published data on the ringed galaxies in several deep fields and confirmed the increase in their volume density with redshift: up to z ∼ 1 their density grows as (1 + z)m, where m ≳ 5.

79 ASTRONOMY AND ASTROPHYSICS↗

Characterization of C-ring component assembly in flagellar motors from amino acid coevolution

Bacterial flagellar motility, an important virulence factor, is energized by a rotary motor localized within the flagellar basal body. The rotor module consists of a large framework (the C-ring), composed of the FliG, FliM and FliN proteins. FliN and FliM contacts the FliG torque ring to control the direction of flagellar rotation. We report that structure-based models constrained only by residue coevolution can recover the binding interface of atomic X-ray dimer complexes with remarkable accuracy (approx. 1 Å RMSD). We propose a model for FliM–FliN heterodimerization, which agrees accurately with homologous interfaces as well as in situ cross-linking experiments, and hence supports a proposed architecture for the lower portion of the C-ring. Furthermore, this approach allowed the identification of two discrete and interchangeable homodimerization interfaces between FliM middle domains that agree with experimental measurements and might be associated with C-ring directional switching dynamics triggered upon binding of CheY signal protein. Our findings provide structural details of complex formation at the C-ring that have been difficult to obtain with previous methodologies and clarify the architectural principle that underpins the ultra-sensitive allostery exhibited by this ring assembly that controls the clockwise or counterclockwise rotation of flagella.

59 BASIC BIOLOGICAL SCIENCES↗

Spectral and dynamical analysis of a single vortex ring in anisotropic harmonically trapped three-dimensional Bose-Einstein condensates

Here in the present work, motivated by numerous recent experimental developments we revisit the dynamics of a single vortex ring in anisotropic harmonic traps. At the theoretical level, we start from a general Lagrangian dynamically capturing the evolution of a vortex ring and not only consider its spectrum of linearized excitations, but also explore the full nonlinear dynamical evolution of the ring as a vortical filament. The theory predicts that the ring is stable for 1 ≤ λ ≤ 2, where λ = ω z /ω r is the ratio of the trapping frequencies along the z and r axes, i.e., for spherical to slightly oblate condensates. We compare this prediction with direct numerical simulations of the full three-dimensional Gross-Pitaevskii equation (GPE) capturing the linearization spectrum of the ring for different values of the chemical potential and as a function of the anisotropy parameter λ . We identify this result as being only asymptotically valid as the chemical potential μ → ∞, revealing how the stability interval narrows and, in particular, its upper bound decreases for finite μ. Finally, we compare at the dynamical level the results of the GPE with the ones effectively capturing the ring dynamics, revealing the unstable evolution for different values of λ, as well as the good agreement between the two.

74 ATOMIC AND MOLECULAR PHYSICS↗

Magnetostatic dipolar domain-wall pinning in chains of permalloy triangular rings.

In a combined experimental and numerical study, we investigated the details of the motion and pinning of domain walls in isolated and interacting permalloy triangular rings (side 2 {micro}m, width 250 nm, and thickness 25 nm). To induce interaction between the rings, they were arranged either in vertical chains with an apex of each triangle in proximity to the edge center of the triangle above it or in horizontal chains where the proximity is between the adjacent corners of the triangles. Using longitudinal and diffraction magneto-optic Kerr effects, magnetic force microscopy, and micromagnetic simulations, we determined the field dependence of the spin structure in the rings. In all cases the remnant state of each ring is an 'onion' state characterized by two domain walls - one head to head the other tail to tail - pinned at the apexes. In isolated rings the magnetization reversal occurs between two onion states via the formation of an intermediate vortex state, which arises from the motion and annihilation of the two domain walls. In the case of the horizontal chains the reversal mechanism is unchanged except that the dipolar interaction affects the field range in which the rings are in the vortex state. In the case of vertical chains an additional intermediate state is observed during reversal. The new state involves a domain wall pinned at the center of the edge that is in close proximity to the apex of its neighbor. We show that the domain-wall motion in this last case can be modeled by a triple potential well. Because the new state requires that a domain wall be pinned at the neighboring apex, our observations can be viewed as a very elementary form of magnetic logic.

36 MATERIALS SCIENCE↗

Hydrodynamic Interactions in Topologically Linked Ring Polymers.

Despite decades of interdisciplinary research on topologically linked ring polymers, their dynamics remain largely unstudied. These systems represent a major scientific challenge as they are often subject to both topological and hydrodynamic interactions (HI), which render dynamical solutions either mathematically intractable or computationally prohibitive. Here we circumvent these limitations by preaveraging the HI of linked rings. We show that the symmetry of ring polymers leads to a hydrodynamic decoupling of ring dynamics. This decoupling is valid even for nonideal polymers and nonequilibrium conditions. Physically, our findings suggest that the effects of topology and HI are nearly independent and do not act cooperatively to influence polymer dynamics. We use this result to develop highly efficient Brownian dynamics algorithms that offer enormous performance improvements over conventional methods and apply these algorithms to simulate catenated ring polymers at equilibrium, confirming the independence of topological effects and HI. The methods developed here can be used to study and simulate large systems of linked rings with HI, including kinetoplast DNA, Olympic gels, and poly[n]catenanes.

Rauscher, Phillip M.↗

Effect of Indenter Elastic Modulus on Hertzian Ring Crack Initiation in Silicon Carbide

The effect of spherical indenter stiffness on Hertzian-contact-induced fracture initiation was examined in hot-pressed silicon carbides (SiCs). Hertzian ring crack initiation forces were measured using zirconia, steel, silicon nitride, alumina, or tungsten carbide spherical indenters (elastic moduli ranging between 213 and 630 GPa). The two (flat target) SiCs were fully dense, and had equivalent elastic moduli (~450 GPa) and fracture toughnesses; however, about 20% of the grains in one SiC were larger than the largest grains in the other. Decreasing the indenter elastic modulus consistently resulted in lower ring crack initiation forces and those differences were statistically significant. Such a decrease in Hertzian ring crack initiation force with decreased indenter elastic modulus indicates the presence of a non-zero friction coefficient. Additionally, independent of the indenter material, ring crack initiation occurred at lower Hertzian indentation forces in the SiC containing larger grains suggesting that the grains in that tail of the grain-size-distribution acted as Griffith-type flaws. Lastly, selecting a spherical indenter material that has the same or similar elastic modulus as the target material provides simpler interpretation, and estimates of ring crack initiation stresses with greater usefulness and fidelity. Such a "matched" condition serves to circumvent the complexities that a ubiquitously unknown coefficient of friction introduces in the estimation of Hertzian ring crack initiation stress.

36 MATERIALS SCIENCE↗

Photoluminescence of GaAs/AlGaAs quantum ring arrays

Samples of epitaxial structures with GaAs/AlGaAs quantum rings different in morphology are grown by droplet epitaxy. The photoluminescence spectra of the samples are recorded at temperatures of 20–90 and 300 K. Intense peaks defined by quantum confinement of the charge-carrier energy in the quantum rings are observed in the optical region. The peaks are identified by estimating the energy of the ground state of electrons and holes in GaAs quantum rings and by recording the spectra of the samples after removing the layers with the quantum rings by etching. The average dimensions of the quantum rings are determined by atomic force microscopy and scanning electron microscopy. Some inferences about the factors that influence the emission spectrum and intensity of the epitaxial structures with quantum rings are drawn.

36 MATERIALS SCIENCE↗

2D material platform for overcoming the amplitude–phase tradeoff in ring resonators

Compact and high-speed electro-optic phase modulators play a vital role in various large-scale applications including optical computing, quantum and neural networks, and optical communication links. Conventional electro-refractive phase modulators such as silicon (Si), III-V and graphene on Si suffer from a fundamental tradeoff between device length and optical loss that limits their scaling capabilities. High-finesse ring resonators have been traditionally used as compact intensity modulators, but their use for phase modulation has been limited due to the high insertion loss associated with the phase shift. Here, we show that high-finesse resonators can achieve a strong phase shift with low insertion loss by simultaneous modulation of the real and imaginary parts of the refractive index, to the same extent, i.e., Δ n Δ k ∼1. To implement this strategy, we demonstrate an active hybrid platform that combines a low-loss SiN ring resonator with 2D materials such as graphene and transition metal dichalcogenide [tungsten disulphide (WSe 2 )], which induces a strong change in the imaginary and real parts of the index. Our platform consisting of a 25 µm long Gr-Al 2 O 3 -WSe 2 capacitor embedded on a SiN ring of 50 µm radius (∼8% ring coverage) achieves a continuous phase shift of (0.46±0.05) π radians with an insertion loss (IL) of 3.18±0.20 dB and a transmission modulation (Δ T Ring ) of 1.72±0.15dB at a probe wavelength ( λ p ) of 1646.18 nm. We find that our Gr-Al 2 O 3 -WSe 2 capacitor exhibits a phase modulation efficiency ( V π 2 ⋅ L ) of 0.530±0.016V⋅cm and can support an electro-optic bandwidth of 14.9±0.1GHz. We further show that our platform can achieve a phase shift of π radians with an IL of 5 dB and a minimum Δ T of 0.046 dB. We demonstrate the broadband nature of the binary phase response, by measuring a phase shift of (1.00±0.10) π radians, with an IL of 5.20±0.31dB and a minimal Δ T Ring of 0.015±0.006dB for resonances spanning from 1564 to 1650 nm. This SiN–2D hybrid platform provides the design for compact and high-speed reconfigurable circuits with graphene and transition metal dichalcogenide (TMD) monolayers that can enable large-scale photonic systems.

Datta, Ipshita (ORCID:0000000318842882)↗

Beam Dynamics Study in a Dual Energy Storage Ring for Ion Beam Cooling

A dual energy storage ring designed for beam cooling consists of two closed rings with significantly different energies: the cooling and damping rings. These two rings are connected by an energy recovering superconducting RF structure that provides the necessary energy difference. In our design, the RF acceleration has a main linac and harmonic cavities both running at crest that at first accelerates the beam from low energy E_{L} to high energy E_{H} and then decelerates the beam from E_{H} to E_{L} in the next pass. The purpose of the harmonic cavities is to extend the bunch length in a dual energy storage ring as such a longer bunch length may be very useful in a cooling application. Besides these cavities, a bunching cavity running on zero-crossing phase is used outside of the common beamline to provide the necessary longitudinal focusing for the system. In this paper, we present a preliminary lattice design along with the fundamental beam dynamics study in such a dual energy storage ring.

Dhital, B.↗

Planning and Prototyping for a Storage Ring Measurement of the Proton Electric Dipole Moment

Electron and proton EDM's can be measured in "frozen spin" (with the beam polarization always parallel to the orbit, for example) storage rings. For electrons the "magic" kinetic energy at which the beam can be frozen is 14.5 MeV. For protons the magic kinetic energy is 230 MeV. The currently measured upper limit for the electron EDM is much smaller than the proton EDM upper limit, which is very poorly known. Nevertheless, because the storage ring will be an order of magnitude cheaper, a sensible plan is to first build an all-electric electron storage ring as a prototype. Such an electron ring was successfully built at Brookhaven, in 1954, as a prototype for their AGS ring. This leaves little uncertainty concerning the cost and performance of such a ring. (This is documentedin one of the Physical Review papers mentioned above.)

43 PARTICLE ACCELERATORS↗

ASX O-ring Life Testing Using a LAW High Bound Melter Feed Simulant (Final Report)

The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is planning to utilize an Isolok sampler to sample the contents of the Low Activity Waste (LAW) and High Level Waste (HLW) Melter Feed Preparation Vessels (MFPV) as well as the contents of the LAW Concentrate Receipt Vessel (CRV). Over the course of testing, it has been recognized that the long term reliability of the o-ring seals in the Isolok sampler are an important component in sampling. The Isolok sampler will be collecting samples of melter feed that contain a high percentage of highly abrasive particles which can impact the life of the o-rings. Although o-ring life in normal service is typically several hundred thousand cycles (such as in the air cylinders and other non-abrasive environments), no data are available for the life of the o-ring seals in this abrasive environment. To address this concern, a Test Exception was issued to perform testing to determine whether the o-rings in an Isolok sampler will continue to function through one year of projected HLW MFPV sampler operation, or approximately 7,000 sampler piston cycles. This final report provides results of the o-ring testing that was performed with the ASX sampler.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Methods for Assessing Opportunities for Ring Dam Pumped Storage Hydropower

There is growing interest in new pumped storage hydropower (PSH) deployment to provide a range of grid flexibility, reliability, and resiliency services under an evolving and uncertain future power sector. The National Laboratory of the Rockies develops open PSH resource assessment and cost modeling tools to help evaluate PSH deployment opportunities, and this report describes expansions to those tools to consider an additional PSH system configuration - ring-dam reservoirs built on flat topographical features that are constructed from roller-compacted concrete material. This reservoir type is common among current PSH proposals and requires new methods to identify sites with this reservoir geometry throughout the United States and characterize the associated dam cost. Cost characterization for ring dam reservoirs required collecting historical dam cost data for earthen, rockfill, and roller-compacted concrete dams and regressing equations that relate costs between alternative materials. The ring dam site identification algorithm follows a 5-step procedure to identify circular geometry reservoirs. Once ring dam reservoirs are identified, they are then paired with potential dry-gully reservoirs, and the full set of potential paired reservoirs is cost-optimized to produce a least-cost set of potential PSH sites with no overlapping reservoirs. The resulting analysis found 1,663 ring-dam to dry-gully systems in the contiguous United States that are lower cost than any overlapping dry-gully to dry-gully systems, 29 in Alaska, and none in Hawaii or Puerto Rico. These systems constitute 1.5 TW of capacity in the contiguous United States and nearly 29 GW in Alaska, demonstrating that under suitable topography and head, ring-dam systems can provide cost-effective PSH opportunities. The greatest density of these opportunities are found in the intermountain west where there are mesas and flat land at bases of mountain ranges, but continued work could incorporate additional site characteristics or consider more complex reservoir shapes to find additional PSH deployment opportunities.

13 HYDRO ENERGY↗

SEEING THROUGH THE RING: NEAR-INFRARED PHOTOMETRY OF V582 MON (KH 15D)

We examine the light and color evolution of the T Tauri binary KH 15D through photometry obtained at wavelengths between 0.55 and 8.0 μm. The data were collected with A Novel Dual Imaging CAMera (ANDICAM) on the 1.3 m SMARTS telescope at Cerro-Tololo Inter-American Observatory and with InfraRed Array Camera on the Spitzer Space Telescope. We show that the system’s circumbinary ring, which acts as a screen that covers and uncovers different portions of the binary orbit as the ring precesses, has reached an orientation where the brighter component (star B) fully or nearly fully emerges during each orbital cycle. The fainter component (star A) remains fully occulted by the screen at all phases. The leading and trailing edges of the screen move across the sky at the same rate of ∼15 m s{sup −1}, consistent with expectation for a ring with a radius and width of ∼4 au and a precession period of ∼6500 years. Light and color variations continue to indicate that the screen is sharp edged and opaque at VRIJH wavelengths. However, we find an increasing transparency of the ring edge at 2.2, 3.6, and 4.5 μm. Reddening seen at the beginning of the eclipse that occurred during the CSI 2264 campaign particularly suggests selective extinction by a population of large dust grains. Meanwhile, the gradual bluing observed while star B is setting is indicative of forward scattering effects at the edge of the ring. The spectral energy distribution of the system at its bright phase shows no evidence of infrared excess emission that can be attributed to radiation from the ring or other dust component out to 8 μm.

79 ASTRONOMY AND ASTROPHYSICS↗

Infrared Spectroscopy of HR 4796A's Bright Outer Cometary Ring + Tenuous Inner Hot Dust Cloud

We have obtained new NASA/IRTF SpeX spectra of the HR 4796A debris ring system. We find a unique red excess flux that extends out to ∼9 μm in Spitzer IRS spectra, where thermal emission from cold, ∼100 K dust from the system’s ring at ∼75 au takes over. Matching imaging ring photometry, we find the excess consists of NIR reflectance from the ring, which is as red as that of old, processed comet nuclei, plus a tenuous thermal emission component from close-in, T ∼ 850 K circumstellar material evincing an organic/silicate emission feature complex at 7–13 μm. Unusual, emission-like features due to atomic Si, S, Ca, and Sr were found at 0.96–1.07 μm, likely sourced by rocky dust evaporating in the 850 K component. An empirical cometary dust phase function can reproduce the scattered light excess and 1:5 balance of scattered versus thermal energy for the ring with optical depth 〈τ〉⩾0.10 in an 8 au wide belt of 4 au vertical height and M {sub dust} > 0.1–0.7 M {sub Mars}. Our results are consistent with HR 4796A, consisting of a narrow shepherded ring of devolatilized cometary material associated with multiple rocky planetesimal subcores and a small steady stream of dust inflowing from this belt to a rock sublimation zone at ∼1 au from the primary. These subcores were built from comets that have been actively emitting large, reddish dust for >0.4 Myr at ∼100 K, the temperature at which cometary activity onset is seen in our solar system.

79 ASTRONOMY AND ASTROPHYSICS↗