Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “replication”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Measuring moment-to-moment pilot workload using synchronous presentations of secondary tasks in a motion-base trainer

A simulation was conducted to determine whether the sensitivity of secondary task measures of pilot workload could be improved by synchronizing their presentation to the occurrence of specific events or pilot actions. This synchronous method of presentation was compared to the more typical asynchronous method, where secondary task presentations are independent of pilot's flight-related activities. Twelve pilots flew low- and high-difficulty scenarios in a motion-base trainer with and without concurrent secondary tasks (e.g., choice reaction time and time production). The difficulty of each scenario was manipulated by the addition of 21 flight-related tasks superimposed on a standard approach and landing sequence. The insertion of the secondary tasks did not affect primary flight performance. However, secondary task performance did reflect workload differences between scenarios and among flight segments within scenarios, replicating the results of an earlier study in which the secondary tasks were presented asynchronously (Bortolussi et al., 1986).

Bortolussi, Michael R.↗

Learning dominance relations in combinatorial search problems

Dominance relations commonly are used to prune unnecessary nodes in search graphs, but they are problem-dependent and cannot be derived by a general procedure. The authors identify machine learning of dominance relations and the applicable learning mechanisms. A study of learning dominance relations using learning by experimentation is described. This system has been able to learn dominance relations for the 0/1-knapsack problem, an inventory problem, the reliability-by-replication problem, the two-machine flow shop problem, a number of single-machine scheduling problems, and a two-machine scheduling problem. It is considered that the same methodology can be extended to learn dominance relations in general.

Yu, Chee-Fen↗

A system for conducting igneous petrology experiments under controlled redox conditions in reduced gravity

The Space Shuttle and the planned Space Station will permit experimentation under conditions of reduced gravitational acceleration offering experimental petrologists the opportunity to study crystal growth, element distribution, and phase chemistry. In particular the confounding effects of macro and micro scale buoyancy-induced convection and crystal settling or flotation can be greatly reduced over those observed in experiments in the terrestrial laboratory. Also, for experiments in which detailed replication of the environment is important, the access to reduced gravity will permit a more complete simulation of processes that may have occurred on asteroids or in free space. A technique that was developed to control, measure, and manipulate oxygen fugacities with small quantities of gas which are recirculated over the sample. This system could be adaptable to reduced gravity space experiments requiring redox control.

Williams, Richard J.↗

Paranoia.Ada: Sample output reports

Paranoia.Ada is a program to diagnose floating point arithmetic in the context of the Ada programming language. The program evaluates the quality of a floating point arithmetic implementation with respect to the proposed IEEE Standards P754 and P854. Paranoia.Ada is derived from the original BASIC programming language version of Paranoia. The Paranoia.Ada replicates in Ada the test algorithms originally implemented in BASIC and adheres to the evaluation criteria established by W. M. Kahan. Paranoia.Ada incorporates a major structural redesign and employs applicable Ada architectural and stylistic features.

Source record↗

Continuing the biological exploration of Mars

Mars has been an object of interest for the better part of this century. To a biologist, Mars assumes special importance because many aspects of the theory of chemical evolution for the origin of life can be tested there. The central idea of this theory is that life on a suitable planet arises through a process in which the so-called biogenic elements combine to form increasingly more complex molecules under the influence of naturally-occurring energy sources ultimately resulting in the formation of replicating organic molecules. The biogenic elements are present on Mars today. Furthermore, the available evidence also strongly suggests that Mars may have had an early history similar to that of the Earth, including a period in which large amounts of liquid water once flowed on its surface and a denser atmosphere and higher global temperatures prevailed. This is important since many lines of evidence indicate that living organisms were already present on the Earth within the first billion years after its formation at a time when the environment on Mars may have closely resembled that of Earth. Our current knowledge of the state of chemical evolution on Mars can best be described as paradoxical. Most of what we have learned has come from experiments performed on the Viking landers. The combination of planned investigations covered a broad range of techniques to detect signs of chemical evolution. The most surprising data from all of these was the absence of any detectable quantities of organic compounds at the two landing sites. On the other hand, the Viking experiments did indicate that the Martian surface samples contained unidentified strong oxidant(s) that could account for their absence.

Klein, Harold P.↗

Improved silicon nitride for advanced heat engines

The technology base required to fabricate silicon nitride components with the strength, reliability, and reproducibility necessary for actual heat engine applications is presented. Task 2 was set up to develop test bars with high Weibull slope and greater high temperature strength, and to conduct an initial net shape component fabrication evaluation. Screening experiments were performed in Task 7 on advanced materials and processing for input to Task 2. The technical efforts performed in the second year of a 5-yr program are covered. The first iteration of Task 2 was completed as planned. Two half-replicated, fractional factorial (2 sup 5), statistically designed matrix experiments were conducted. These experiments have identified Denka 9FW Si3N4 as an alternate raw material to GTE SN502 Si3N4 for subsequent process evaluation. A detailed statistical analysis was conducted to correlate processing conditions with as-processed test bar properties. One processing condition produced a material with a 97 ksi average room temperature MOR (100 percent of goal) with 13.2 Weibull slope (83 percent of goal); another condition produced 86 ksi (6 percent over baseline) room temperature strength with a Weibull slope of 20 (125 percent of goal).

Yeh, Hun C.↗

A new VLSI architecture for a single-chip-type Reed-Solomon decoder

A new very large scale integration (VLSI) architecture for implementing Reed-Solomon (RS) decoders that can correct both errors and erasures is described. This new architecture implements a Reed-Solomon decoder by using replication of a single VLSI chip. It is anticipated that this single chip type RS decoder approach will save substantial development and production costs. It is estimated that reduction in cost by a factor of four is possible with this new architecture. Furthermore, this Reed-Solomon decoder is programmable between 8 bit and 10 bit symbol sizes. Therefore, both an 8 bit Consultative Committee for Space Data Systems (CCSDS) RS decoder and a 10 bit decoder are obtained at the same time, and when concatenated with a (15,1/6) Viterbi decoder, provide an additional 2.1-dB coding gain.

Hsu, I. S.↗

Test aspects of the JPL Viterbi decoder

The generation of test vectors and design-for-test aspects of the Jet Propulsion Laboratory (JPL) Very Large Scale Integration (VLSI) Viterbi decoder chip is discussed. Each processor integrated circuit (IC) contains over 20,000 gates. To achieve a high degree of testability, a scan architecture is employed. The logic has been partitioned so that very few test vectors are required to test the entire chip. In addition, since several blocks of logic are replicated numerous times on this chip, test vectors need only be generated for each block, rather than for the entire circuit. These unique blocks of logic have been identified and test sets generated for them. The approach employed for testing was to use pseudo-exhaustive test vectors whenever feasible. That is, each cone of logid is tested exhaustively. Using this approach, no detailed logic design or fault model is required. All faults which modify the function of a block of combinational logic are detected, such as all irredundant single and multiple stuck-at faults.

Breuer, M. A.↗

Long decoding runs for Galileo's convolutional codes

Decoding results are described for long decoding runs of Galileo's convolutional codes. A 1 k-bit/sec hardware Viterbi decoder is used for the (15, 1/4) convolutional code, and a software Viterbi decoder is used for the (7, 1/2) convolutional code. The output data of these long runs are stored in data files using a data compression format which can reduce file size by a factor of 100 to 1 typically. These data files can be used to replicate the long, time-consuming runs exactly and are useful to anyone who wants to analyze the burst statistics of the Viterbi decoders. The 1 k-bit/sec hardware Viterbi decoder was developed in order to demonstrate the correctness of certain algorithmic concepts for decoding Galileo's experimental (15, 1/4) code, and for the long-constraint-length codes in general. The hardware decoder can be used both to search for good codes and to measure accurately the performance of known codes.

Lahmeyer, C. R.↗

Results of inphase axial-torsional fatigue experiments on 304 stainless steel

A series of axial-torsional, inphase, strain-controlled, low-cycle fatigue tests were performed at room temperature on tubular specimens of 304 stainless steel. The program was conducted in cooperation with the task group on multiaxial fatigue research of ASTM committee E-09. The objective was to quantify the variability in multiaxial test results among several laboratories. Only included is data which was generated at the NASA Lewis Research Center's High Temperature Fatigue and Structures Laboratory. The experimental equipment and procedures used are described. The tubular specimens were polished on the outer surface to aid in the use of a cellulose film surface replication technique for crack detection. However, cracking initiated predominantly on the internal surface for all specimens. Honing of the bore of the tubular specimens lessened but did not entirely eliminate this problem. The observed fatigue lives are compared with lives calculated from three multiaxial life models. Constants for the life prediction models were obtained from uniaxial and torsional tests performed on the same heat of material. The observed fatigue lives agreed with calculated lives to within a factor of two for all but one of the life prediction models.

Bonacuse, Peter J.↗

Simulation of the low earth orbital atomic oxygen interaction with materials by means of an oxygen ion beam

Atomic oxygen is the predominant species in low-Earth orbit between the altitudes of 180 and 650 km. These highly reactive atoms are a result of photodissociation of diatomic oxygen molecules from solar photons having a wavelength less than or equal to 2430A. Spacecraft in low-Earth orbit collide with atomic oxygen in the 3P ground state at impact energies of approximately 4.2 to 4.5 eV. As a consequence, organic materials previously used for high altitude geosynchronous spacecraft are severely oxidized in the low-Earth orbital environment. The evaluation of materials durability to atomic oxygen requires ground simulation of this environment to cost effectively screen materials for durability. Directed broad beam oxygen sources are necessary to evaluate potential spacecraft materials performance before and after exposure to the simulated low-Earth orbital environment. This paper presents a description of a low energy, broad oxygen ion beam source used to simulate the low-Earth orbital atomic oxygen environment. The results of materials interaction with this beam and comparison with actual in-space tests of the same meterials will be discussed. Resulting surface morphologies appear to closely replicate those observed in space tests.

Banks, Bruce A.↗

Software reliability studies

The longterm goal of this research is to identify or create a model for use in analyzing the reliability of flight control software. The immediate tasks addressed are the creation of data useful to the study of software reliability and production of results pertinent to software reliability through the analysis of existing reliability models and data. The completed data creation portion of this research consists of a Generic Checkout System (GCS) design document created in cooperation with NASA and Research Triangle Institute (RTI) experimenters. This will lead to design and code reviews with the resulting product being one of the versions used in the Terminal Descent Experiment being conducted by the Systems Validations Methods Branch (SVMB) of NASA/Langley. An appended paper details an investigation of the Jelinski-Moranda and Geometric models for software reliability. The models were given data from a process that they have correctly simulated and asked to make predictions about the reliability of that process. It was found that either model will usually fail to make good predictions. These problems were attributed to randomness in the data and replication of data was recommended.

Wilson, Larry W.↗

Avionics architecture studies for the entry research vehicle

This report is the culmination of a year-long investigation of the avionics architecture for NASA's Entry Research Vehicle (ERV). The Entry Research Vehicle is conceived to be an unmanned, autonomous spacecraft to be deployed from the Shuttle. It will perform various aerodynamic and propulsive maneuvers in orbit and land at Edwards AFB after a 5 to 10 hour mission. The design and analysis of the vehicle's avionics architecture are detailed here. The architecture consists of a central triply redundant ultra-reliable fault tolerant processor attached to three replicated and distributed MIL-STD-1553 buses for input and output. The reliability analysis is detailed here. The architecture was found to be sufficiently reliable for the ERV mission plan.

Dzwonczyk, M. J.↗

Display-based communications for advanced transport aircraft

The next generation of civil transport aircraft will depend increasingly upon ground-air-ground and satellite data link for information critical to safe and efficient air transportation. Previous studies which examined the concept of display-based communications in addition to, or in lieu of, conventional voice transmissions are reviewed. A full-mission flight simulation comparing voice and display-based communication modes in an advanced transport aircraft is also described. The results indicate that a display-based mode of information transfer does not result in significantly increased aircrew workload, but does result in substantially increased message acknowledgment times when compared to conventional voice transmissions. User acceptance of the display-based communication system was generally high, replicating the findings of previous studies. However, most pilots tested expressed concern over the potential loss of information available from frequency monitoring which might result from the introduction of discrete address communications. Concern was expressed by some pilots for the reduced time available to search for conflicting traffic when using the communications display system. The implications of the findings for the design of display-based communications are discussed.

Lee, Alfred T.↗

Distributed control architecture for real-time telerobotic operation

The emerging field of telerobotics places new demands on control system architecture to allow both autonomous operations and natural human-machine interfacing. The feasibility of multiprocessor systems performing parallel control computations is realizable. A practical distribution of control processors is presented and the issues involved in the realization of this architecture are discussed. A prototype dual axis controller based on the NOVIX computer is described, and results of its implementation are discussed. Application of this type of control system to a replicated, redundant manipulator system is also described.

Martin, H. L.↗

Software reliability growth models dominated by randomness

The Jelinski-Moranda and Geometric models for software reliability failed the consistency test which was proposed. These models were challenged to take data which comes from a process which they have correctly modeled and to make predictions about the reliability of that process. It was found that either model, given data precisely from a process it correctly models, will usually fail to make good predictions. These problems are attributed to randomness in the data used as input to the models and a remedy is indicated for this lack of robustness, namely replication of data.

Shen, Wenhui↗

Telerobotics for the efficient utilization of space

Telerobotics is a new technology that is being developed to perform remote manipulation in space. It seeks to accommodate the needs arising from a rapidly increasing investment in space assets and from the large costs deriving from human operations in space, especially EVA. Telerobotics applies advanced automation and artificial intelligence technology and combines the immediacy of execution of teleoperation (the replication at a distance of the physical motions of the operator) with the efficiency and precision of supervised robotic autonomy (the accomplishment of assignments through machine task decomposition and interpretation of sensor information). One of the key goals of this approach is the achievement of a seamless transition between teleoperation and supervised autonomy. The basis of this technology and of the NASA telerobotics research and development activities are described. They consist of five elements: core research, laboratory integration testbed, mission analysis, application demonstrations and flight experiments. Current advances, both in research and system integration are reported including the first integration of the laboratory testbed and quantitative comparisons obtained in a buoyant facility. Planned future goals are outlined.

Varsi, Giulio↗

Simulation and diagnosis of water vapor imagery with mesoscale model output

The present simulation of 6.7-micron channel water vapor imagery employs March 6-7, 1982 soundings from the Limited Area Mesoscale Prediction System (LAMPS) mesoscale model as inputs to a radiative transfer scheme. A comparison of model-generated and observed brightness temperatures indicates that LAMPS was able to replicate major features of the VAS imagery, including the pronounced warm, dry development streak and a cold cloud area. The model was not, however, able to resolve such finer-scaled details as the double structure of the development portion of the streak.

Muller, Bradley M.↗