SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Practical methods for generating acceptable random numbers from a variety of probability distributions which are frequently encountered in engineering applications are described. The speed, accuracy, and guarantee of statistical randomness of the various methods are discussed.
An efficient algorithm for generating random number pairs from a bivariate normal distribution was developed. Any desired value of the two means, two standard deviations, and correlation coefficient can be selected. Theoretically the technique is exact and in practice its accuracy is limited only by the quality of the uniform distribution random number generator, inaccuracies in computer function evaluation, and arithmetic. A FORTRAN routine was written to check the algorithm and good accuracy was obtained. Some small errors in the correlation coefficient were observed to vary in a surprisingly regular manner. A simple model was developed which explained the qualities aspects of the errors.
A computerized data bank system was developed for utilization of large amounts of vibration and acoustic data to formulate component random vibration design and test criteria. This system consists of a computer, graphics tablet, and a dry-silver hard copier which are all desk-top type hardware and occupy minimal space. The data bank contains data from the Saturn V and Titan III flight and static test programs. The vibration and acoustic data are stored in the form of power spectral density and one-third octave band plots over the frequency range from 20 to 2000 Hz. The data was stored by digitizing each spectral plot by tracing with the graphics tablet. The digitized data was statistically analyzed and the resulting 97.5% probability levels were stored on tape along with the appropriate structural parameters. Standard extrapolation procedures were programmed for prediction of component random vibration test criteria for new launch vehicle and payload configurations. This automated vibroacoustic data bank system greatly enhances the speed and accuracy of formulating vibration test criteria. In the future, the data bank will be expanded to include all data acquired from the space shuttle flight test program.
A backscatter model for a randomly perturbed periodic surface has been developed to explain backscatter measurements from a bare soil surface with row structure. It is assumed that the row-direction effect can be included by integrating the scattering coefficient due to the random roughness component over the underlying periodic component of the soil surface. It is found that the row-direction effect is strongly dependent upon the rate of change of this scattering coefficient with the local angle, and that the maximum difference between looking parallel and perpendicular to the row direction occurs around an incidence angle whose tangent is equal to the slope of the periodic surface at the inflection point.
Based on the works of Ruze (1966) and Vu (1969), a novel mathematical model has been developed to determine efficiently the average power pattern degradations caused by random surface errors. In this model, both nonuniform root mean square (rms) surface errors and nonuniform illumination functions are employed. In addition, the model incorporates the dependence on F/D in the construction of the solution. The mathematical foundation of the model rests on the assumption that in each prescribed annular region of the antenna, the geometrical rms surface value is known. It is shown that closed-form expressions can then be derived, which result in a very efficient computational method for the average power pattern. Detailed parametric studies are performed with these expressions to determine the effects of different random errors and illumination tapers on parameters such as gain loss and sidelobe levels. The results clearly demonstrate that as sidelobe levels decrease, their dependence on the surface rms/wavelength becomes much stronger and, for a specified tolerance level, a considerably smaller rms/wavelength is required to maintain the low sidelobes within the required bounds.
A numerical, grid-free algorithm is presented for one-dimensional reaction-diffusion model of laminar flame propagation in premixed gases. It is based on the random element method we developed for the analysis of diffusional processes. The effect of combustion is taken into account by applying the principle of fractional steps to separate the process of diffusion, modeled by the random walk of computational elements, from the exothermic effects of chemical reaction, monitoring their strength. The validity of the algorithm is demonstrated by application to flame propagation problems for which exact solutions exist. The flame speed evaluated by its use oscillates around the exact value at a relatively small amplitude, while the temperature and species concentration profiles are self-correcting in their convergence to the exact solution. A satisfactory resolution is obtained by the use of quite a small number of computational elements which automatically adjust their distribution of fit sharp gradients.
Random decrement signatures have been introduced for use in the determination of the frequencies of oscillation, damping ratios and modes of vibration of structural systems from naturally induced vibration data. This paper gives an analysis of the random decrement method and the conditions which must be satisfied in order for the method to yield consistent estimates.
Two approaches for computing scattering from a random layer with an irregular interface are shown using the radiative-transfer principle. One approach is applied to a random layer to develop a scattering model for snow and sea ice, while the other is used to generate a scattering model for vegetation. It is noted that to model the scattering characteristics of a special medium, it is necessary to relate the electromagnetic parameters to the measurable parameters of the scatterers in the medium. Such relations are given and used to calculate theoretical estimates to compare with measurements acquired by microwave scatterometers.
The kinetic theory of wave propagation in random media is applied to assess the relative merits of the peripherally segmented, axially segmented and 'checkerboard' configured acoustic duct treatments proposed by Mani (1976). It is argued that, in a first approximation, a multisegmented liner involving many discrete and distinct sections may be modelled as a liner whose impedance varies randomly with position. This results in a relatively simple analytical description of the acoustic properties of the liner in terms of a system of linear, first order ordinary differential equations, whose solution gives the distribution with axial distance of the acoustic modal intensities. The theory is expected to be valid provided that the variation in the impedance from segment to segment is small, so that the conclusions obtained here are of a preliminary nature, and must be regarded as giving a general indication of features which should be incorporated into the design of efficient acoustic liners. The principal such conclusion is that a checkerboard liner offers the best means of increasing the attenuation over and above that of a uniformly lined duct. On the other hand, only minimal gains are to be derived from the use of strictly peripherally segmented liners.
The strong fluctuation theory is applied to the study of electromagnetic wave scattering from a layer of random discrete scatterers. The singularity of the dyadic Green's function is taken into account in the calculation of the effective permittivity functions. The correlation functions for the random medium with different scatterer constituents and size distributions are derived. Applying the dyadic Green's function for a two-layer medium and using the bilocal and distorted Born approximations, the first and the second moments of the fields are then calculated. Both the backscattering and bistatic scattering coefficients are obtained, and the former is shown to match favorably with experimental data obtained from snow fields.
The development of design load factors for aerospace and aircraft components and experiment support structures, which are subject to a simultaneous vehicle dynamic vibration (quasi-static) and acoustically generated random vibration, require the selection of a combination methodology. Typically, the procedure is to define the quasi-static and the random generated response separately, and arithmetically add or root sum square to get combined accelerations. Since the combination of a probabilistic and a deterministic function yield a probabilistic function, a viable alternate approach would be to determine the characteristics of the combined acceleration probability density function and select an appropriate percentile level for the combined acceleration. The following paper develops this mechanism and provides graphical data to select combined accelerations for most popular percentile levels.
An analytical method is presented for determining large-deflection static bending, large-amplitude free and forced vibrations, and large-amplitude random response of a clamped, symmetrically laminated, rectangular, thin plate subjected to a uniformly distributed transverse loading. Both movable and immovable inplane boundary conditions are considered. Numerical results for bending deflections and strains, frequency ratios, mean-square center deflections and mean-square maximum strains are presented showing the parametric effects of plate length-to-width ratio, orientation of layers, and intensities of applied force for both the linear and nonlinear cases. The analytical results for large-deflection random response are verified through comparison with experimental data.
An experimental modal analysis of the Galileo spacecraft was required to verify a finite element model used in loads analysis. Multiple input random and polyreference analysis techniques were applied in this program to demonstrate their effectiveness in determining the modal characteristics of a complex space structure. The methods were successful in determining an accurate set of modal data from two days of data acquisition. A complete set of results was available within 24 hours of test completion. Final analysis shows the modes from the multiple input random tests to be more complete and orthogonal than those obtained from classical sine dwell methods.
This paper describes the development and use of an algorithm to compute approximate statistics of the magnitude of a single random trajectory correction maneuver (TCM) Delta v vector. The TCM Delta v vector is modeled as a three component Cartesian vector each of whose components is a random variable having a normal (Gaussian) distribution with zero mean and possibly unequal standard deviations. The algorithm uses these standard deviations as input to produce approximations to (1) the mean and standard deviation of the magnitude of Delta v, (2) points of the probability density function of the magnitude of Delta v, and (3) points of the cumulative and inverse cumulative distribution functions of Delta v. The approximates are based on Monte Carlo techniques developed in a previous paper by the author and extended here. The algorithm described is expected to be useful in both pre-flight planning and in-flight analysis of maneuver propellant requirements for space missions.
Two cubic spline formulations are presented for representing the quantile function (inverse cumulative distribution function) of a random sample of data. Both B-spline and rational spline approximations are compared with analytic representations of the quantile function. It is also shown how these representations can be used to generate random samples for use in simulation studies. Comparisons are made on samples generated from known distributions and a sample of experimental data. The spline representations are more accurate for multimodal and skewed samples and to require much less time to generate samples than the analytic representation.
Research studies of residents' responses to noise consist of interviews with samples of individuals who are drawn from a number of different compact study areas. The statistical techniques developed provide a basis for those sample design decisions. These techniques are suitable for a wide range of sample survey applications. A sample may consist of a random sample of residents selected from a sample of compact study areas, or in a more complex design, of a sample of residents selected from a sample of larger areas (e.g., cities). The techniques may be applied to estimates of the effects on annoyance of noise level, numbers of noise events, the time-of-day of the events, ambient noise levels, or other factors. Methods are provided for determining, in advance, how accurately these effects can be estimated for different sample sizes and study designs. Using a simple cost function, they also provide for optimum allocation of the sample across the stages of the design for estimating these effects. These techniques are developed via a regression model in which the regression coefficients are assumed to be random, with components of variance associated with the various stages of a multi-stage sample design.
Shortly after a strongly anisotropic beam of charged particles is injected along a guiding magnetic field on which is superimposed a small random conponent, the particle density can be represented by a Gaussian profile whose center moves with the coherent velocity and whose width increases with time at a rate controlled by the coefficient of dispersion. Both parameters depend upon the mean free path, which characterizes scattering by the random fields, and the focusing length, which characterizes spatial variations of the guiding field. These dependencies are known explicitly for the coherent velocity. Formulae for coefficient of dispersion are available only in the limits of very weak and very strong focusing. A new expression for coefficient of dispersion, which spans this gap, is presented.
Random copolymer templates containing cytosine and uracil in ratios of 3:1 and 1:1 are used to explore the optimum conditions for efficient synthesis of guanine and adenine-containing oligonucleotides. The experimental procedure is described, including the preparation of mononucleoside 5'-phospho-2-methylimidazolides and random copolymers, the template-directed oligomerization, the removal and reintroduction of mononucleotides in interrupted reactions, the determination of oligomerization efficiency, the alkaline and enzymatic hydrolysis of reaction products, and the column chromatography. Results are presented and discussed for the dependence of adenine incorporation on the formation of short oligo(G)s, optimization of incorporation efficiencies by adjusting monomer concentrations, the characterization of oligomeric product distribution, and the regiospecificity of adenine incorporation. The prebiotic significance of the results is assessed.