Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “radial diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Combined Raman imaging and {sup 18}O tracer analysis for the study of zircaloy-4 high-temperature oxidation in spent fuel pool accident - 2016-0037

Oxidation at high temperature (HT) of cladding materials is expected to be the primary cause of the fuel assemblies degradation in spent fuel storage pool loss of cooling accidents. Unlike a loss-of-coolant accident (LOCA) in a reactor vessel, the presence of air in the atmosphere is expected in a spent fuel pool accident and is known to be an aggravating factor because of the 'catalytic' role of nitrogen on the oxidation. In steam LOCA conditions, a low-temperature (LT) oxidation scale simulating the corrosion oxide formed during in-service use of the assemblies has been observed to have a protective effect regarding subsequent HT oxidation. In the presence of nitrogen, HT oxidation kinetic experiments show that the protective effect of an LT corrosion scale also exists but is lost much earlier than in pure steam. Oxygen transport through LT oxide layers has been studied using the {sup 18}O tracer technique. We performed experiments in {sup 18}O{sub 2} alone as well as in mixed {sup 18}O{sub 2}+N{sub 2} atmospheres, at 850 deg. C. Micro-Raman imaging, both at the specimen surfaces and on cross sections gave clear evidence for different characteristic distributions of {sup 18}O in the scales. Some of these distributions have been correlated with the presence of cracks and porosity in the LT oxide, which allows oxygen to locally penetrate in the scales. In cases in which no radial crack is present, apparent oxygen diffusion coefficients in the oxide were derived from fitting {sup 18}O diffusion profiles. Nitrogen appears to have no or only a limited influence on the oxygen diffusivity, but it is observed to reach the metal-oxide interface faster than oxygen, at which point it reacts with the metal and the sub-stoichiometric oxide to form zirconium nitride.The later conversion of the ZrN into ZrO{sub 2} might lead to the destabilization of the LT scale and to the loss of its protective effect. (authors)

36 MATERIALS SCIENCE↗

Data-Driven Reduced-Order Modeling of Convective Heat Transfer in Porous Media

This work presents a data-driven Reduced-Order Model (ROM) for parametric convective heat transfer problems in porous media. The intrusive Proper Orthogonal Decomposition aided Reduced-Basis (POD-RB) technique is employed to reduce the porous medium formulation of the incompressible Reynolds-Averaged Navier–Stokes (RANS) equations coupled with heat transfer. Instead of resolving the exact flow configuration with high fidelity, the porous medium formulation solves a homogenized flow in which the fluid-structure interactions are captured via volumetric flow resistances with nonlinear, semi-empirical friction correlations. A supremizer approach is implemented for the stabilization of the reduced fluid dynamics equations. The reduced nonlinear flow resistances are treated using the Discrete Empirical Interpolation Method (DEIM), while the turbulent eddy viscosity and diffusivity are approximated by adopting a Radial Basis Function (RBF) interpolation-based approach. The proposed method is tested using a 2D numerical model of the Molten Salt Fast Reactor (MSFR), which involves the simulation of both clean and porous medium regions in the same domain. For the steady-state example, five model parameters are considered to be uncertain: the magnitude of the pumping force, the external coolant temperature, the heat transfer coefficient, the thermal expansion coefficient, and the Prandtl number. For transient scenarios, on the other hand, the coastdown-time of the pump is the only uncertain parameter. The results indicate that the POD-RB-ROMs are suitable for the reduction of similar problems. The relative L2 errors are below 3.34% for every field of interest for all cases analyzed, while the speedup factors vary between 54 (transient) and 40,000 (steady-state).

German, Péter (ORCID:0000000307285283)↗

Effect of rotor meridional velocity ratio on response to inlet radial and circumferential distortion

Three single transonic fan stages, each having a different meridional velocity ratio across its rotor, were tested with two magnitudes of tip radial distortion and with a 90 deg circumferential distortion imposed on the inlet flow. The rotor with the lowest meridional velocity ratio (less than 0.9 at the tip) demonstrated the least degradation of performance due to these distortions. Loss and deviation angle data (as needed for performance prediction with radial distortion) calculated along actual streamlines for radially distorted flow and correlated against diffusion factor, showed consistent agreement with data calculated along design streamlines for undistorted flow.

Sanger, N. L.↗

On solar cosmic rays

The report summarizes the major results obtained over the last four years in the following areas: (1) transport in interplanetary space which includes solar particle observations combined with theoretical efforts to develop models which simulate the dynamics of the event; (2) transport in the solar corona and release of particles in the interplanetary medium; and (3) characteristics of source spectra and acceleration models. Modelling the propagation of solar cosmic rays through interplanetary space and establishing the magnitude and the radial and energy dependence of the diffusion coefficient K are considered. An important result due to statistical observation is that the coronal propagation must be independent of or weakly dependent on both rigidity and energy. Increasing evidence is found for prolonged injection at the sun.

Van Hollebeke, M. A. I.↗

Stellar convection. III - Convection at large Rayleigh numbers

The results of a numerical, three-dimensional study of convection in a self-gravitating sphere of Boussinesq fluid with a Rayleigh number of 10-billion and a Prandtl number of 1 are presented. The velocity and temperature are computed by using spectral methods in the horizontal and finite-differencing in the radial directions. An eddy viscosity and diffusivity are needed to model the subresolution flow. For Rayleigh numbers much less than 10-billion the flows do not have well-defined inertial ranges, and an eddy viscosity and diffusivity cannot be assigned in this self-consistent manner. By computing the energy spectra as well as the detailed energy budgets as a function of wavenumber, it is shown that for Rs = 10-billion there is an inertial range for the modes corresponding to spherical harmonics with l greater than 6.

Marcus, P. S.↗

Study of spectral exponent on quiet and disturbed days

The spectral exponents of the diurnal and semidiurnal anisotropies are studied on quiet and disturbed days for a period from 1964 to 75. It has been observed for the diurnal anisotropy that the spectral exponent for quiet days is 0.0 from 1964 to 70, however during 1971 and onwards its value is found different from zero and is -0.4; for disturbed days the spectral exponent is observed to be 0.0 from 1964 to 75 with an exception of the year 1966. Further, it has been observed for the semi-diurnal anisotropy that the best value for the spectral exponent on quiet days being + 0.6 from 1964 to 74; however on disturbed days the value of spectral exponent is sometimes negative or positive but different from zero. It was derived from the present investigation that superimposed on the corotational anisotropy, expected from a balance between outward radial convection and inward field aligned diffusion, there is an additional component operating during the period under consideration.

Kumar, S.↗

2D/1D approximations to the 3D neutron transport equation. I: Theory

A new class of '2D/1D' approximations is proposed for the 3D linear Boltzmann equation. These approximate equations preserve the exact transport physics in the radial directions x and y and diffusion physics in the axial direction z. Thus, the 2D/1D equations are more accurate approximations of the 3D Boltzmann equation than the conventional 3D diffusion equation. The 2D/1D equations can be systematically discretized, to yield accurate simulation methods for 3D reactor core problems. The resulting solutions will be more accurate than 3D diffusion solutions, and less expensive to generate than standard 3D transport solutions. In this paper, we (i) show that the simplest 2D/1D equation has certain desirable properties, (ii) systematically discretize this equation, and (iii) derive a stable iteration scheme for solving the discrete system of equations. In a companion paper [1], we give numerical results that confirm the theoretical predictions of accuracy and iterative stability. (authors)

97 MATHEMATICS AND COMPUTING↗

A time-dependent diffusion-convection model for the long-term modulation of cosmic rays

The model considered incorporates, to first order, the direct effects of the time-dependent diffusive propagation of interstellar cosmic rays in a slowly changing interplanetary medium. A one-dimensional model is discussed along with a three-dimensional radial wind. An evaluation is conducted of average diffusive propagation times. It is found that the effects of time-dependent diffusive propagation can be quite significant. A rigidity-dependent time delay or 'lag' in the modulated spectra is predicted.

Ogallagher, J. J.↗

Modulation and diffusion theory of cosmic rays

Papers given on the modulation of galactic cosmic rays by the solar wind at the 14th International Cosmic Ray Conference are reviewed. Some of the topics treated in this review are Pioneer and Helios radial gradient measurement, heliolatitude effects in modulation models, diffusion (scattering) theory - including pitch angle diffusion diagrams - solar flare particle transport theory and cosmic ray fluctuations at neutron monitor energies.

Forman, M. A.↗

The radial variation of solar flare proton anisotropies observed in deep space on Pioneers 10 and 11

The anisotropy of solar-flare protons (greater than 3 MeV) was evaluated at the time of maximum for each of 24 events measured by Pioneers 10 and 11 and was observed to decrease gradually between 1 and 4.7 AU. Since diffusive streaming is related directly to the effective diffusion coefficient parallel to the interplanetary spiral magnetic field, these observations provide a measure of the radial dependence of interplanetary diffusion parameters. Analysis of these results suggests that the spiral field increases gradually with heliocentric distance. An expression is given for the radial dependence of that field.

Mccarthy, J.↗

The stability of the contact interface of cylindrical and spherical shock tubes

The stability of the contact interface for radial shock tubes is investigated as a model for explosive dispersal. The advection upstream splitting method with velocity and pressure diffusion (AUSM+-up) is used to solve for the radial base flow. To explore the stability of the resulting contact interface, perturbed governing equations are derived assuming harmonic modes in the transverse directions. The perturbed harmonic flow is solved by assuming an initial disturbance and using a perturbed version of AUSM+-up derived in this paper. The intensity of the perturbation near the contact interface is computed and compared to theoretical results obtained by others. Despite the simplifying assumptions of the theoretical analysis, very good agreement is confirmed. Not only can the magnitude of the instability be predicted during the initial expansion, but also remarkably the agreement between the numerical and theoretical results can be maintained through the collision between the secondary shock and the contact interface. Since the theoretical results only depend upon the time evolution of the base flow, the stability of various modes could be quickly studied without explicitly solving a system of partial differential equations for the perturbed flow.

42 ENGINEERING↗

A Numerical Study of Forbush Decreases with a 3D Cosmic-Ray Modulation Model Based on an SDE Approach

Based on the reduced diffusion mechanism for producing Forbush decreases (Fds) in the heliosphere, we constructed a three-dimensional (3D) diffusion barrier, and by incorporating it into a stochastic differential equation (SDE) based time-dependent, cosmic-ray transport model, a 3D numerical model for simulating Fds is built and applied to a period of relatively quiet solar activity. This SDE model generally corroborates previous Fd simulations concerning the effects of the solar magnetic polarity, the tilt angle of the heliospheric current sheet (HCS), and cosmic-ray particle energy. Because the modulation processes in this 3D model are multi-directional, the barrier’s geometrical features affect the intensity profiles of Fds differently. We find that both the latitudinal and longitudinal extent of the barrier have relatively fewer effects on these profiles than its radial extent and the level of decreased diffusion inside the disturbance. We find, with the 3D approach, that the HCS rotational motion causes the relative location from the observation point to the HCS to vary, so that a periodic pattern appears in the cosmic-ray intensity at the observing location. Correspondingly, the magnitude and recovery time of an Fd change, and the recovering intensity profile contains oscillation as well. Investigating the Fd magnitude variation with heliocentric radial distance, we find that the magnitude decreases overall and, additionally, that the Fd magnitude exhibits an oscillating pattern as the radial distance increases, which coincides well with the wavy profile of the HCS under quiet solar modulation conditions.

79 ASTRONOMY AND ASTROPHYSICS↗

Mathematical model of diffusion-limited gas bubble dynamics in unstirred tissue with finite volume

Models of gas bubble dynamics for studying decompression sickness have been developed by considering the bubble to be immersed in an extravascular tissue with diffusion-limited gas exchange between the bubble and the surrounding unstirred tissue. In previous versions of this two-region model, the tissue volume must be theoretically infinite, which renders the model inapplicable to analysis of bubble growth in a finite-sized tissue. We herein present a new two-region model that is applicable to problems involving finite tissue volumes. By introducing radial deviations to gas tension in the diffusion region surrounding the bubble, the concentration gradient can be zero at a finite distance from the bubble, thus limiting the tissue volume that participates in bubble–tissue gas exchange. It is shown that these deviations account for the effects of heterogeneous perfusion on gas bubble dynamics, and are required for the tissue volume to be finite. The bubble growth results from a difference between the bubble gas pressure and an average gas tension in the surrounding diffusion region that explicitly depends on gas uptake and release by the bubble. For any given decompression, the diffusion region volume must stay above a certain minimum in order to sustain bubble growth.

NASA Discipline Environmental Health↗

Diffusion-driven growth of nanowires by low-temperature molecular beam epitaxy

With ZnTe as an example, we use two different methods to unravel the characteristics of the growth of nanowires (NWs) by gold-catalyzed molecular beam epitaxy at low temperature. In the first approach, CdTe insertions have been used as markers, and the nanowires have been characterized by scanning transmission electron microscopy, including geometrical phase analysis and energy dispersive electron spectrometry; the second approach uses scanning electron microscopy and the statistics of the relationship between the length of the tapered nanowires and their base diameter. Axial and radial growth are quantified using a diffusion-limited model adapted to the growth conditions; analytical expressions describe well the relationship between the NW length and the total molecular flux (taking into account the orientation of the effusion cells), and the catalyst-nanowire contact area. A long incubation time is observed. This analysis allows us to assess the evolution of the diffusion lengths on the substrate and along the nanowire sidewalls, as a function of temperature and deviation from stoichiometric flux.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Large-eddy simulation of flow through a plane, asymmetric diffuser

A challenge for traditional turbulence modeling, based on the Reynolds averaged Navier-Stokes equations, remains the accurate prediction of 'mild', adverse pressure-gradient driven separation from a smooth surface. With this study we want to explore the capability of large-eddy simulation to predict the separation which occurs on the deflected wall of an asymmetric, plane diffuser with opening angle of 10 deg. The flow through the plane diffuser exhibits some additional interesting physical phenomena which make it a challenging test case. In addition to 'mild' separation about halfway down the deflected ramp, the flow is characterized by a small backflow zone with stalled fluid in the rear part of the expanding section. The turbulent flow entering the diffuser is subject to combined adverse and radial pressure gradients stemming from the convex curvature. Finally the flow recovers into a developed, turbulent channel flow in the outlet section. Obi et al. provide measurements of mean flow, Reynolds stresses, and pressure recovery, which were obtained by means of LDV in a wind tunnel. The objective of this study is to investigate whether LES with the standard dynamic model is able to accurately predict the flow in the one-sided diffuser and to explore the resolution requirements and associated costs.

Kaltenbach, Hans-Jakob↗

Compressible flow in a diffusing S-duct with flow separation

Local flow velocity vectors, as well as static and total pressures along ten radial traverses, were obtained at six stations for secondary flows in a diffusing 30-30-deg S-duct with circular cross section. The strong secondary flow measured in the first bend continued into the second with new vorticity produced in the opposite direction. Contour plots representing the transverse velocity field, as well as total and static pressure contours, have been obtained. As a result of the secondary flow and subsequent separation, substantial total pressure distortion is noted to occur at the duct exit.

Vakili, A. D.↗

Variations in lithium vapor cave performance predictions due to radial transport and recycling assumptions

The lithium vapor cave is a detached divertor design that uses a single private flux region baffle to contain a dense cloud of lithium vapor to dissipate heat flux. Plasma flows are created via fuel gas puffing in order to minimize lithium contamination of the main plasma. Significant modeling using the 2D edge code SOLPS-ITER has already been performed, predicting that sufficient target heat flux reductions (q$^{max}_{Target}$ MW m −2 ) with ( $n$ Li /$n$ e ) LCFS < 0.05 is possible in a case with 90 MW m −2 unmitigated heat flux in NSTX-U. Low heat flux and low upstream concentration was found with a variety of combinations of divertor geometries, target recycling coefficients, upstream plasma parameters, lithium evaporation locations and deuterium fueling locations, with variations in performance found for each design choice. However, the most universal uncertainty of SOLPS-ITER simulations has until now remained unaddressed systematically, namely the cross-field anomalous particle and heat diffusivities. This article aims to bound the uncertainty in lithium concentration prediction as a result of the assumed deuterium cross-field transport and recycling. For the simulations presented here, a factor of 2.1 increase in the upstream lithium density prediction across a factor of four decrease to the assumed deuterium radial particle diffusivity is found. This result is compared across different assumed deuterium recycling coefficients, known to reduce with lithium injection. Upstream lithium density is found to vary by a factor of 2.4 across a feasible range of recycling coefficients at similar $n$$^{OMP,sep}_{e}$.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measuring Magnetic Fields in Collisionless Experiments

Magnetic field and electron density diagnostics are critical tools in the characterization of high energy density laboratory plasmas. These plasma environments are complex and the magnetic fields and electron densities often exhibit significant spatial and temporal variation leading to significant challenges in these measurements. Even the most promising technique, Zeeman splitting, faces challenges under plasma conditions where broadening due to high density and temperature is greater than the Zeeman splitting. Here we propose and describe a diagnostic based on Zeeman broadening. The Zeeman broadening diagnostic relies on measuring the widths of multiplet components simultaneously. The method does not depend on resolved lines, but rather on measuring the difference in the widths of multiplet lines. Experiments were performed at the University of Nevada, Reno, Nevada Terawatt Facility (NTF). The Zeeman broadening diagnostic gathered visible broadened multiplet spectra from laser produced plasmas, and plasmas generated from wire-arrays driven by the Zebra z-pinch pulsed power apparatus. The laser produced plasma, created by the Leopard pulsed laser (I>1014 W/cm 2 ), evolved in an external magnetic field (B<40T) generated by current driven through a solid electrode by the Zebra current pulse. For laser produced plasmas, observation of the magnetic field radial profile showed that the external field completely diffuses into the plasma after approximately 100 ns. Further, as the plasma continues to evolve, the field profiles within the plasma develop modulations that do not map the external field profile. For the wire array experiments, radial electron density, and magnetic field, profiles were measured. Here the Zeeman splitting was not resolved and the magnetic fields were determined from the difference between the widths of the multiplet line profiles. Thus, it has been demonstrated that Zeeman broadening may be used as a magnetic field diagnostic.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗