Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “power conversion system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Reference Model 5 (RM5): Oscillating Surge Wave Energy Converter

This report is an addendum to SAND2013-9040: Methodology for Design and Economic Analysis of Marine Energy Conversion (MEC) Technologies. This report describes an Oscillating Water Column Wave Energy Converter (OSWEC) reference model design in a complementary manner to Reference Models 1-4 contained in the above report. A conceptual design for a taut moored oscillating surge wave energy converter was developed. The design had an annual electrical power of 108 kilowatts (kW), rated power of 360 kW, and intended deployment at water depths between 50 m and 100 m. The study includes structural analysis, power output estimation, a hydraulic power conversion chain system, and mooring designs. The results were used to estimate device capital cost and annual operation and maintenance costs. The device performance and costs were used for the economic analysis, following the methodology presented in SAND2013-9040 that included costs for designing, manufacturing, deploying, and operating commercial-scale MEC arrays up to 100 devices. The levelized cost of energy estimated for the Reference Model 5 OSWEC, presented in this report, was for a single device and arrays of 10, 50, and 100 units, and it enabled the economic analysis to account for cost reductions associated with economies of scale. The baseline commercial levelized cost of energy estimate for the Reference Model 5 device in an array comprised of 10 units is $1.44/kilowatt-hour (kWh), and the value drops to approximately $0.69/kWh for an array of 100 units.

16 TIDAL AND WAVE POWER↗

Bridgman growth of large-aperture yttrium calcium oxyborate crystal

Highlights: ► YCOB is a novel non-linear optical crystal possessing good thermal, mechanical and nonlinear optical properties. ► Large size crystal growth is key technology question for YCOB crystal. ► YCOB crystals 3 in. in diameter were grown with modified vertical Bridgman method. ► It is a more effective growth method to obtain large size and high quality YCOB crystal. -- Abstract: Large-aperture yttrium calcium oxyborate YCa{sub 4}O(BO{sub 3}){sub 3} (YCOB) crystals with 3 in. in diameter were grown with modified vertical Bridgman method, and the large crystal plate (63 mm × 68 mm × 20 mm) was harvested for high-average power frequency conversion system. The crack, facet growth and spiral growth can be effectively controlled in the as-grown crystal, and Bridgman method displays more effective in obtain large size and high quality YCOB crystal plate than Czochralski technique.

36 MATERIALS SCIENCE↗

Experimental physics characteristics of a heavy-metal-reflected fast-spectrum critical assembly

A zero-power critical assembly was designed, constructed, and operated for the purpose of conducting a series of benchmark experiments dealing with the physics characteristics of a UN-fueled, Li-cooled, Mo-reflected, drum-controlled compact fast reactor for use with a space-power electric conversion system. The range of the previous experimental investigations has been expanded to include the reactivity effects of:(1) surrounding the reactor with 15.24 cm (6 in.) of polyethylene, (2) reducing the heights of a portion of the upper and lower axial reflectors by factors of 2 and 4, (3) adding 45 kg of W to the core uniformly in two steps, (4) adding 9.54 kg of Ta to the core uniformly, and (5) inserting 2.3 kg of polyethylene into the core proper and determining the effect of a Ta addition on the polyethylene worth.

Heneveld, W. H.↗

OAST Space Theme Workshop. Volume 3: Working group summary. 6: Power (P-2). A. Statement. B. Technology needs (form 1). C. Priority assessment (form 2)

Power requirements for the multipurpose space power platform, for space industrialization, SETI, the solar system exploration facility, and for global services are assessed for various launch dates. Priorities and initiatives for the development of elements of space power systems are described for systems using light power input (solar energy source) or thermal power input, (solar, chemical, nuclear, radioisotopes, reactors). Systems for power conversion, power processing, distribution and control are likewise examined.

Source record↗

The NASA Space Power Technology Program

This paper discusses the National Aeronautics and Space Administration's (NASA) Space Power Technology Program which is aimed at providing the needed technology for NASA's future missions. The technology program is subdivided into five areas: (1) photovoltaic energy conversion; (2) chemical energy conversion and storage; (3) thermal to electric conversion; (4) power system management and distribution, and (5) advanced energetics. Recent accomplishments, current status, and future directions are presented for each area.

Mullin, J. P.↗

Satellite Power Systems (SPS) concept definition study. Volume 4: SPS point design definition

The satellite power systems point design concept is described. The concept definition includes satellite, ground and space systems, and their relationships. Emphasis is placed on the definition of the GaAlAs photovoltaic satellite system. The major subsystems of the satellite system including power conversion, power distribution and control, microwave, attitude control and stationkeeping, thermal control, structures, and information management and control are discussed.

Hanley, G.↗

Annual technical report, fiscal year 1979. Volume 1: Executive summary

Accomplishments of the Point-Focusing Distributed Receiver Technology project are presented. The following aspects of the project are discussed: information dissemination, concentrator development, receiver and heat transport network development, power conversion, manufacturing, systems engineering, and tests and evaluations.

Lucas, J. W.↗

Alkali Metal Thermoelectric Conversion (AMTEC) for space nuclear power systems

Performance parameters of the Alkali Metal Thermoelectric Converter (AMTEC) for a 100 kW electric power system have been calculated at four technological levels assuming a heat pipe-cooled nuclear reactor heat source. The most advanced level considered would operate between 1180 K converter temperature and 711 K radiator temperature at 16 percent efficiency, and would weigh 1850 kg with a radiator area of 43 sq m. In addition, electrode research studies for the AMTEC systems have been conducted utilizing an experimental test cell of Bankston et al. (1983) and Mo and several Mo-Ti electrodes. It was found that the Mo-Ti electrodes offered no improvement in lifetime characteristics over the pure Mo electrodes, however, oxygen treatment of a degraded Mo electrode restored its specific power output to 90 percent of its original specific power and maintained this level for 60 hr, thus offering a potential for lifetime stability.

Bankston, C. P.↗

Design considerations for space radiators based on the liquid sheet (LSR) concept

This study is directed at performing a comparative examination of LSR characteristics as they affect the basic design of low earth orbit solar dynamic conversion systems. The power systems considered were based on the closed Brayton (CBC) and the free piston Stirling (FPS) cycles, each with a power output of 2 kWe and using previously tested silicone oil (Dow-Corning Me2) as the radiator working fluid. Conclusions indicate that, due to its ability for direct cold end cooling, an LSR based heat rejection subsystem is far more compatible with a Stirling space power system than with a CBC, which requires LSR coupling by means of an intermediate gas/liquid heat exchanger and adjustment of cycle operating conditions.

Juhasz, Albert J.↗

Risk Management for Dynamic Radioisotope Power Systems

The implementation of dynamic power conversion technology in Radioisotope Power Systems (RPS) for spaceflight has potential for improved specific power and efficiency, compared with existing Radioisotope Thermoelectric Generators (RTGs). This proposed expansion of current RPS technology necessitates a full exploration of the requirements, goals, and concerns related to risks in developing and deploying such systems. The nature of dynamic systems also presents a new set of challenges related to the presence of moving machinery not intrinsic to traditional RTG units. A general RPS risk management methodology is outlined, which is used to identify and assess the variables and operational scenarios introducing risk throughout the design, fabrication, and system integration processes. This paper will demonstrate how mission requirements for Dynamic RPS concepts (DRPS) drive decisions throughout the development process. This work will define the standard practices for decision making within the scope of the risks associated with DRPS hardware development and deployment in sensitive spacecraft near sensitive payloads. Examples of potential risk areas are analyzed for the proposed dynamic systems, and compared to those associated with traditional RTG technologies. This analysis shows the promise for DRPS systems to elevate and extend the capabilities for power systems used in future NASA missions.

Matthes, Christopher S. R.↗

Multi-objective optimization of a PCHE-type intermediate heat exchanger using genetic algorithms

For the advanced nuclear reactor systems and power conversion units, it is important to optimize the design of intermediate heat exchangers (IHXs) which transfer heat from the primary loop to the secondary or intermediate loop. For a multi-objective optimization problem, a printed circuit heat exchanger-type IHX with zigzag and S-shaped fin channels is selected to be optimized in terms of both the total cost and the heat exchanger thermal effectiveness using genetic algorithms. A computer code is developed to search a set of optimized designs of the zigzag channel geometry. It is found that among the Pareto-optimal solutions, the total cost is approximately linearly related to the thermal effectiveness between 88 and 95% while it rises rapidly after the effectiveness exceeds 95%. An optimal flow channel diameter is also determined through the optimization. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Nuclear Electric Propulsion Modular Power Conversion Model

This work builds upon a previously examined single loop power conversion cycle for nuclear electric propulsion systems. The intent of this model is to enable examination of trends within the system and extract system parameters that could be used in a mass model to understand how technology performance may impact overall system mass.Several model upgrades were made since the previous work which included physics-based sizing of the turbomachinery and pressure loss inside the radiator. A higher fidelity and modular fluid property code was also developed to help understand the impact of variable fluid properties more accurately and allow for the analysis of different fluids in the same model. The upgraded model features radiator and reactor loops with separate fluids from the Brayton cycle to understand advantages and disadvantages of using multiple working fluids as well as the capability of simulating off nominal system performance. The latter provides a steppingstone for modeling the transient performance of the power conversion system.

NEP↗

Modular Standards for Space Power Systems

This presentation presents an approach to provide commonality for future space power systems through a set of modular power standards. The approach presented breaks down the electrical power conversion and distribution system into the lowest level functions, which are represented by power electronics modules, and serve as the foundational building blocks of the system. A series of Modular Power Standards has been developed to define the functions and interfaces of the lowest level of the electrical power system, or for each type of power electronics module. The power electronics modules, when integrated with a common chassis and backplane, can then be built up into modular electronics assemblies, which have been demonstrated and characterized in a relevant ground test environment.

Gardner, Brent G.↗