SEARCH · Engineering Papers

Results for “point cloud”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

All sources NASA NTRS DOE OSTI

NASA NTRS2003

Ice-Accretion Scaling Using Water-Film Thickness Parameters

Studies were performed at INTA in Spain to determine water-film thickness on a stagnation-point probe inserted in a simulated cloud. The measurements were correlated with non-dimensional parameters describing the flow and the cloud conditions. Icing scaling tests in the NASA Glenn Icing Research Tunnel were then conducted using the Ruff scaling method with the scale velocity found by matching scale and reference values of either the INTA non-dimensional water-film thickness or a Weber number based on that film thickness. For comparison, tests were also performed using the constant drop-size Weber number and the average-velocity methods. The reference and scale models were both aluminum, 61-cm-span, NACA 0012 airfoil sections at 0 deg. AOA. The reference had a 53-cm-chord and the scale, 27 cm (1/2 size). Both models were mounted vertically in the center of the IRT test section. Tests covered a freezing fraction range of 0.28 to 1.0. Rime ice (n = 1.0) tests showed the consistency of the IRT calibration over a range of velocities. At a freezing fraction of 0.76, there was no significant difference in the scale ice shapes produced by the different methods. For freezing fractions of 0.40, 0.52 and 0.61, somewhat better agreement with the reference horn angles was typically achieved with the average-velocity and constant-film thickness methods than when either of the two Weber numbers was matched to the reference value. At a freezing fraction of 0.28, the four methods were judged equal in providing simulations of the reference shape.

Anderson, David N.↗

NASA NTRS2004

High Lapse Rates in AIRS Retrieved Temperatures in Cold Air Outbreaks

The Atmospheric Infrared Sounder (AIRS) experiment, on NASA's Aqua spacecraft, uses a combination of infrared and microwave observations to retrieve cloud and surface properties, plus temperature and water vapor profiles comparable to radiosondes throughout the troposphere, for cloud cover up to 70%. The high spectral resolution of AIRS provides sensitivity to important information about the near-surface atmosphere and underlying surface. A preliminary analysis of AIRS temperature retrievals taken during January 2003 reveals extensive areas of superadiabatic lapse rates in the lowest kilometer of the atmosphere. These areas are found predominantly east of North America over the Gulf Stream, and, off East Asia over the Kuroshio Current. Accompanying the high lapse rates are low air temperatures, large sea-air temperature differences, and low relative humidities. Imagery from a Visible / Near Infrared instrument on the AIRS experiment shows accompanying clouds. These lines of evidence all point to shallow convection in the bottom layer of a cold air mass overlying warm water, with overturning driven by heat flow from ocean to atmosphere. An examination of operational radiosondes at six coastal stations in Japan shows AIRS to be oversensitive to lower tropospheric lapse rates due to systematically warm near-surface air temperatures. The bias in near-surface air temperature is seen to be independent of sea surface temperature, however. AIRS is therefore sensitive to air-sea temperature difference, but with a warm atmospheric bias. A regression fit to radiosondes is used to correct AIRS near-surface retrieved temperatures, and thereby obtain an estimate of the true atmosphere-ocean thermal contrast in five subtropical regions across the north Pacific. Moving eastward, we show a systematic shift in this air-sea temperature differences toward more isothermal conditions. These results, while preliminary, have implications for our understanding of heat flow from ocean to atmosphere. We anticipate future improvements in the AIRS retrieval algorithm will lead to improved understanding of the exchange of sensible and latent heat from ocean to atmosphere, and more realistic near-surface lapse rates.

cold air outbreak↗

NASA NTRS2008

Visual Data Analysis for Satellites

The Visual Data Analysis Package is a collection of programs and scripts that facilitate visual analysis of data available from NASA and NOAA satellites, as well as dropsonde, buoy, and conventional in-situ observations. The package features utilities for data extraction, data quality control, statistical analysis, and data visualization. The Hierarchical Data Format (HDF) satellite data extraction routines from NASA's Jet Propulsion Laboratory were customized for specific spatial coverage and file input/output. Statistical analysis includes the calculation of the relative error, the absolute error, and the root mean square error. Other capabilities include curve fitting through the data points to fill in missing data points between satellite passes or where clouds obscure satellite data. For data visualization, the software provides customizable Generic Mapping Tool (GMT) scripts to generate difference maps, scatter plots, line plots, vector plots, histograms, timeseries, and color fill images.

Lau, Yee↗

NASA NTRS2011

Evaluation of the Global Multi-Resolution Terrain Elevation Data 2010 (GMTED2010) Using ICESat Geodetic Control

Supported by NASA's Earth Surface and Interior (ESI) Program, we are producing a global set of Ground Control Points (GCPs) derived from the Ice, Cloud and land Elevation Satellite (ICESat) altimetry data. From February of 2003, to October of 2009, ICESat obtained nearly global measurements of land topography (+/- 86deg latitudes) with unprecedented accuracy, sampling the Earth's surface at discrete approx.50 m diameter laser footprints spaced 170 m along the altimetry profiles. We apply stringent editing to select the highest quality elevations, and use these GCPs to characterize and quantify spatially varying elevation biases in Digital Elevation Models (DEMs). In this paper, we present an evaluation of the soon to be released Global Multi-resolution Terrain Elevation Data 2010 (GMTED2010). Elevation biases and error statistics have been analyzed as a function of land cover and relief. The GMTED2010 products are a large improvement over previous sources of elevation data at comparable resolutions. RMSEs for all products and terrain conditions are below 7 m and typically are about 4 m. The GMTED2010 products are biased upward with respect to the ICESat GCPs on average by approximately 3 m.

Carabajal, Claudia C.↗

NASA NTRS2011

Obtaining the Grobner Initialization for the Ground Flash Fraction Retrieval Algorithm

At optical wavelengths and from the vantage point of space, the multiple scattering cloud medium obscures one's view and prevents one from easily determining what flashes strike the ground. However, recent investigations have made some progress examining the (easier, but still difficult) problem of estimating the ground flash fraction in a set of N flashes observed from space In the study by Koshak, a Bayesian inversion method was introduced for retrieving the fraction of ground flashes in a set of flashes observed from a (low earth orbiting or geostationary) satellite lightning imager. The method employed a constrained mixed exponential distribution model to describe the lightning optical measurements. To obtain the optimum model parameters, a scalar function of three variables (one of which is the ground flash fraction) was minimized by a numerical method. This method has formed the basis of a Ground Flash Fraction Retrieval Algorithm (GoFFRA) that is being tested as part of GOES-R GLM risk reduction.

Solakiewicz, R.↗

NASA NTRS2017

A UAV-Based Fog Collector Design for Fine-Scale Aerobiological Sampling

Airborne microbes are found throughout the troposphere and into the stratosphere. Knowing how the activity of airborne microorganisms can alter water, carbon, and other geochemical cycles is vital to a full understanding of local and global ecosystems. Just as on the land or in the ocean, atmospheric regions vary in habitability; the underlying geochemical, climatic, and ecological dynamics must be characterized at different scales to be effectively modeled. Most aerobiological studies have focused on a high level: 'How high are airborne microbes found?' and 'How far can they travel?' Most fog and cloud water studies collect from stationary ground stations (point) or along flight transects (1D). To complement and provide context for this data, we have designed a UAV-based modified fog and cloud water collector to retrieve 4D-resolved samples for biological and chemical analysis.Our design uses a passive impacting collector hanging from a rigid rod suspended between two multi-rotor UAVs. The suspension design reduces the effect of turbulence and potential for contamination from the UAV downwash. The UAVs are currently modeled in a leader-follower configuration, taking advantage of recent advances in modular UAVs, UAV swarming, and flight planning.The collector itself is a hydrophobic mesh. Materials including Tyvek, PTFE, nylon, and polypropylene monofilament fabricated via laser cutting, CNC knife, or 3D printing were characterized for droplet collection efficiency using a benchtop atomizer and particle counter. Because the meshes can be easily and inexpensively fabricated, a set can be pre-sterilized and brought to the field for 'hot swapping' to decrease cross-contamination between flight sessions or use as negative controls.An onboard sensor and logging system records the time and location of each sample; when combined with flight tracking data, the samples can be resolved into a 4D volumetric map of the fog bank. Collected samples can be returned to the lab for a variety of analyses. Based on a review of existing flight studies, we have identified ion chromatography, metagenomic sequencing, cell staining and quantification, and ATP quantification as high-priority assays for implementation. Support for specific toxicology assays, such as methylmercury quantification, is also planned.

Design↗

NASA NTRS2016

A UAV-Based Fog Collector Design for Fine-Scale Aerobiological Sampling

Airborne microbes are found throughout the troposphere and into the stratosphere. Knowing how the activity of airborne microorganisms can alter water, carbon, and other geochemical cycles is vital to a full understanding of local and global ecosystems. Just as on the land or in the ocean, atmospheric regions vary in habitability; the underlying geochemical, climatic, and ecological dynamics must be characterized at different scales to be effectively modeled. Most aerobiological studies have focused on a high level: 'How high are airborne microbes found?' and 'How far can they travel?' Most fog and cloud water studies collect from stationary ground stations (point) or along flight transects (1D). To complement and provide context for this data, we have designed a UAV-based modified fog and cloud water collector to retrieve 4D-resolved samples for biological and chemical analysis.Our design uses a passive impacting collector hanging from a rigid rod suspended between two multi-rotor UAVs (Unmanned Aerial Vehicles). The suspension design reduces the effect of turbulence and potential for contamination from the UAV downwash. The UAVs are currently modeled in a leader-follower configuration, taking advantage of recent advances in modular UAVs, UAV swarming, and flight planning.The collector itself is a hydrophobic mesh. Materials including Tyvek, PTFE, nylon, and polypropylene monofilament fabricated via laser cutting, CNC knife, or 3D printing were characterized for droplet collection efficiency using a benchtop atomizer and particle counter. Because the meshes can be easily and inexpensively fabricated, a set can be pre-sterilized and brought to the field for 'hot swapping' to decrease cross-contamination between flight sessions or use as negative controls.An onboard sensor and logging system records the time and location of each sample; when combined with flight tracking data, the samples can be resolved into a 4D volumetric map of the fog bank. Collected samples can be returned to the lab for a variety of analyses. Based on a review of existing flight studies, we have identified ion chromatography, metagenomic sequencing, cell staining and quantification, and ATP quantification as high-priority assays for implementation. Support for specific toxicology assays, such as methyl-mercury quantification, is also planned.

Design↗

NASA NTRS2021

Total X-ray Emission from the LMC Observed with HaloSat

We constrain the LMC’s global parameters by modeling the first soft X-ray (0.4–6.8 keV) observations of the entire Large Magellanic Cloud (LMC) produced in a single pointing with moderate spectral resolution by the HaloSat CubeSat. These data are best fit with the sum of two thermal plasma components in collisional ionization equilibrium and a power-law. We find cool (0.210±0.014keV) and hot (0.89±0.14keV) components. The LMC’s total X-ray luminosity is(1.08±0.14)×1039erg s−1.X-ray binaries make up a large fraction of the emission with a luminosity of(6.0±0.8)×1038ergs−1, followed by cool gas from superbubbles, supernovae, and diffuse emission with a luminosity of(3.0±0.3)×1038erg s−1. The hot gas from star formation contributes the smallest fraction, with a luminosity of(1.9±0.5)×1038erg s−1. We estimate the total volume of the cool gas to be between(0.2–1.2)×1010pc3and the hot gas to be between(1.0–5)×107pc3for filling factors off= 1and0.2. These volumes result in a total thermal energy for the cool gas between (1.4–3)×1054ergs for electron densities of 0.017–0.04 cm−3, and a thermal energy for the hot gas between (1.7–4)×1053ergs for electron densities of 0.12–0.3 cm−3. This yields cooling timescales for the cool and hot gas of(1.5–3)×108years and(1.8–6)×107years, respectively

LMC↗

NASA NTRS2021

The Response of the Amazon Ecosystem to the Photosynthetically Active Radiation Fields: Integrating Impacts of Biomass Burning Aerosol and Clouds in the NASA GEOS Earth System Model

The Amazon experiences fires every year, and the resulting biomass burning aerosols, together with cloud particles, influence the penetration of sunlight through the atmosphere, increasing the ratio of diffuse to direct photosynthetically active radiation (PAR) reaching the vegetation canopy and thereby potentially increasing ecosystem productivity. In this study, we use the NASA Goddard Earth Observing System (GEOS) model with coupled aerosol, cloud, radiation, and ecosystem modules to investigate the impact of Amazon biomass burning aerosols on ecosystem productivity, as well as the role of the Amazon’s clouds in tempering this impact. The study focuses on a seven-year period (2010-2016) during which the Amazon experienced a variety of dynamic environments (e.g., La Niña, normal years, and El Niño). The direct radiative impact of biomass burning aerosols on ecosystem productivity—called here the aerosol diffuse radiation fertilization effect —is found to increase Amazonian Gross Primary Production (GPP) by 2.6% via a 3.8% increase in diffuse PAR (DFPAR) despite a 5.4% decrease in direct PAR (DRPAR) on multiyear average during burning seasons. On a monthly basis, this increase in GPP can be as large as 9.9% (occurring in August 2010). Consequently, the net primary production (NPP) in Amazon is increased by 1.5%, or ~92 Tg C a-1– equivalent to ~37% of the average carbon lost due to Amazon fires over the seven years considered. Clouds, however, strongly regulate the effectiveness of the aerosol diffuse radiation fertilization effect. The efficiency of this fertilization effect is the highest in cloud-free conditions and linearly decreases with increasing cloud amount until the cloud fraction reaches ~0.8, at which point the aerosol-influenced light changes from being a stimulator to an inhibitor of plant growth. Nevertheless, interannual changes in the overall strength of the aerosol diffuse radiation fertilization effect are primarily controlled by the large interannual changes in biomass burning aerosols rather than by changes in cloudiness during the studied period.

biomass burning aerosols on ecosystem productivity↗

NASA NTRS2016

The Inner Edge of the Habitable Zone for Synchronously Rotating Planets Around Low-Mass Stars Using General Circulation Models

Terrestrial planets at the inner edge of the habitable zone (HZ) of late-K and M-dwarf stars are expected to be in synchronous rotation, as a consequence of strong tidal interactions with their host stars. Previous global climate model (GCM) studies have shown that, for slowly rotating planets, strong convection at the substellar point can create optically thick water clouds, increasing the planetary albedo, and thus stabilizing the climate against a thermal runaway. However these studies did not use self-consistent orbital/rotational periods for synchronously rotating planets placed at different distances from the host star. Here we provide new estimates of the inner edge of the HZ for synchronously rotating terrestrial planets around late-K and M-dwarf stars using a 3D Earth-analog GCM with self-consistent relationships between stellar metallicity, stellar effective temperature, and the planetary orbital/rotational period. We find that both atmospheric dynamics and the efficacy of the substellar cloud deck are sensitive to the precise rotation rate of the planet. Around mid-to-late M-dwarf stars with low metallicity, planetary rotation rates at the inner edge of the HZ become faster, and the inner edge of the HZ is farther away from the host stars than in previous GCM studies. For an Earth-sized planet, the dynamical regime of the substellar clouds begins to transition as the rotation rate approaches ∼10 days. These faster rotation rates produce stronger zonal winds that encircle the planet and smear the substellar clouds around it, lowering the planetary albedo, and causing the onset of the water-vapor greenhouse climatic instability to occur at up to ∼25% lower incident stellar fluxes than found in previous GCM studies. For mid-to-late M-dwarf stars with high metallicity and for mid-K to early-M stars, we agree with previous studies.

Planet and satellite atmospheres↗

NASA NTRS2019

Impact of Assimilating Adaptively Thinned AIRS Cloud-Cleared Radiances in the GEOS

This work examines the assimilation of AIRS (Atmospheric Infrared Sounder) radiances from two points of view: the thinning strategy and the use of cloud-cleared radiances as opposed to clear-sky. Previous published work by this team, based on a very large set of Observing System Experiments performed with a 2014 3DVAR version of the GEOS (Goddard Earth Observing System), has shown that the assimilation of adaptively thinned AIRS cloud-cleared radiances (CCRs) improves the representation of tropical cyclones (TCs) without damaging the global forecast skill. The simple adaptive methodology is based on denser AIRS coverage in moving domains centered on TCs, and sparser coverage everywhere else. Subsequent experiments showed that the adaptive methodology produces good results also when applied to clear-sky CrIS (Cross-track Infrared Sounder) and IASI (Infrared Atmospheric Sounding Interferometer) radiances. In addition, the results indicate that the density of all hyperspectral data assimilated over meteorologically inactive areas is excessive, probably because of horizontal error correlation, suggesting that the global thinning should be more aggressive. More recent work focused on the polar regions has shown another positive impact of assimilating cloud-cleared AIRS radiances instead of clear-sky. The results show that high latitude atmospheric dynamics is very sensitive to the representation of the lower tropospheric temperature structure over the Arctic region. Specifically, assimilation of CCRs over areas that are data poor and also affected by broken stratus clouds, and as such minimally observed by AIRS clear-sky radiances, changes substantially the temperature structure over the Arctic low troposphere. Ingestion of CCRs over the region propagates, through hydrostatic adjustments, to mid-tropospheric geopotential height, allowing for better prediction of mid-latitude waves. In addition, adaptively thinned CCRs also improve the representation of mesoscale convective cyclones at high latitudes. An example of an Antarctic low is provided. Finally, recent ongoing work with the hybrid 4DenVAR GEOS, investigating the 2017 boreal TC season, has confirmed the previous results: namely that aggressively thinned cloud-cleared radiances improve TC structure with no loss of global skill.

CCR↗

NASA NTRS1986

Local variation of haze thickness on the equatorial region of Venus

The horizontal distribution of haze particles in the equatorial region of Venus was investigated using selected polarimetry maps obtained by the Orbiter Cloud Photopolarimeter (OCP) aboard the Pioneer Venus Orbiter, with five of these maps having been acquired on five consecutive terrestrial days. Nine sets of OCP polarimetry maps (PM) similar to PM 16 employed by Kawabata et al. (1980) were selected, and 935 nm data points were extracted to construct a cloud-haze model, from which the haze fraction f(h) within the cloud and the corresponding optical thickness tau(h) were determined for the period from December 1978 to October 1980. The results indicate that, in this period, the upper cloud layer of Venus had haze layers with tau(h) of about 0.02. Furthermore, the submicron particles present within the principal cloud contributed approximately 6 percent to the total scattering cross section per unit volume. Although no systematic time variations in the derived values of tau(h) and f(h) were noticeable, the consecutive five day observations indicated a presence of a large-scale horizontal inhomogeneity in haze particle distribution.

Kawabata, Kiyoshi↗

NASA NTRS1993

Normalized vertical ice mass flux profiles from vertically pointing 8-mm-wavelength Doppler radar

During the FIRE 2 (First International Satellite Cloud Climatology Project Regional Experiment) project, NOAA's Wave Propagation Laboratory (WPL) operated its 8-mm wavelength Doppler radar extensively in the vertically pointing mode. This allowed for the calculation of a number of important cirrus cloud parameters, including cloud boundary statistics, cloud particle characteristic sizes and concentrations, and ice mass content (imc). The flux of imc, or, alternatively, ice mass flux (imf), is also an important parameter of a cirrus cloud system. Ice mass flux is important in the vertical redistribution of water substance and thus, in part, determines the cloud evolution. It is important for the development of cloud parameterizations to be able to define the essential physical characteristics of large populations of clouds in the simplest possible way. One method would be to normalize profiles of observed cloud properties, such as those mentioned above, in ways similar to those used in the convective boundary layer. The height then scales from 0.0 at cloud base to 1.0 at cloud top, and the measured cloud parameter scales by its maximum value so that all normalized profiles have 1.0 as their maximum value. The goal is that there will be a 'universal' shape to profiles of the normalized data. This idea was applied to estimates of imf calculated from data obtained by the WPL cloud radar during FIRE II. Other quantities such as median particle diameter, concentration, and ice mass content can also be estimated with this radar, and we expect to also examine normalized profiles of these quantities in time for the 1993 FIRE II meeting.

Orr, Brad W.↗

NASA NTRS1990

Cloud absorption properties as derived from airborne measurements of scattered radiation within clouds

Researchers briefly review the diffusion domain method for deriving the cloud similarity parameter and present preliminary analyses of the results thus far obtained. The presentation concentrates on the following points: (1) intercomparison of calibrated reflected intensities between the cloud absorption radiometer and the U.K. multispectral cloud radiometer; (2) quality control tests required to select those portions of an aircraft flight for which measurements are obtained within the diffusion domain; (3) case studies of the spectral similarity parameter of marine stratocumulus clouds; and comparisons of the experimentally-derived similarity parameter spectrum with that expected theoretically from the cloud droplet size distribution obtained from in situ observations.

King, Michael D.↗

NASA NTRS1990

Cloud and boundary layer structure over San Nicolas Island during FIRE

The temporal evolution of the structure of the marine boundary layer and of the associated low-level clouds observed in the vicinity of the San Nicolas Island (SNI) is defined from data collected during the First ISCCP Regional Experiment (FIRE) Marine Stratocumulus Intense Field Observations (IFO) (July 1 to 19). Surface, radiosonde, and remote-sensing measurements are used for this analysis. Sounding from the Island and from the ship Point Sur, which was located approximately 100 km northwest of SNI, are used to define variations in the thermodynamic structure of the lower-troposphere on time scales of 12 hours and longer. Time-height sections of potential temperature and equivalent potential temperature clearly define large-scale variations in the height and the strength of the inversion and periods where the conditions for cloud-top entrainment instability (CTEI) are met. Well defined variations in the height and the strength of the inversion were associated with a Cataline Eddy that was present at various times during the experiment and with the passage of the remnants of a tropical cyclone on July 18. The large-scale variations in the mean thermodynamic structure at SNI correlate well with those observed from the Point Sur. Cloud characteristics are defined for 19 days of the experiment using data from a microwave radiometer, a cloud ceilometer, a sodar, and longwave and shortwave radiometers. The depth of the cloud layer is estimated by defining inversion heights from the sodar reflectivity and cloud-base heights from a laser ceilometer. The integrated liquid water obtained from NOAA's microwave radiometer is compared with the adiabatic liquid water content that is calculated by lifting a parcel adiabatically from cloud base. In addition, the cloud structure is characterized by the variability in cloud-base height and in the integrated liquid water.

Albrecht, Bruce A.↗

NASA NTRS1984

Thunderstorm cloud top dynamics as inferred from satellite observations and models

Satellite observations of convective towers penetrating the tropopause are summarized. Three classes of thunderstorm cloud tops including storm tops that have a monotonic temperature-height pattern with the highest point being the coldest point (class 1), tops that have a colocated cold and high point with the warm point on the downward slope to the rear of the highest point (class 2), and tops in which the cold point is offset upwind from the high point, with a cold-warm couplet straddling the convective cloud top (class 3), are described. A one-dimensional cloud parcel model applied in the overshooting region is used to explore the causes of the storm top's unique temperature/height structures.

Adler, R. F.↗

NASA NTRS2016

Construction of a Matched Global Cloud and Radiance Product from LEO/GEO and EPIC Observations to Estimate Daytime Earth Radiation Budget from DSCOVR

With the launch of the Deep Space Climate Observatory (DSCOVR), new estimates of the daytime Earth radiation budget can be computed from a combination of measurements from the two Earth-observing sensors onboard the spacecraft, the Earth Polychromatic Imaging Camera (EPIC) and the National Institute of Standards and Technology Advanced Radiometer (NISTAR). Although these instruments can provide accurate top-of-atmosphere (TOA) radiance measurements, they lack sufficient resolution to provide details on small-scale surface and cloud properties. Previous studies have shown that these properties have a strong influence on the anisotropy of the radiation at the TOA, and ignoring such effects can result in large TOA-flux errors. To overcome these effects, high-resolution scene identification is needed for accurate Earth radiation budget estimation. Selected radiance and cloud property data measured and derived from several low earth orbit (LEO, including NASA Terra and Aqua MODIS, NOAA AVHRR) and geosynchronous (GEO, including GOES (east and west), METEOSAT, INSAT-3D, MTSAT-2, and HIMAWARI-8) satellite imagers were collected to create hourly 5-km resolution global composites of data necessary to compute angular distribution models (ADM) for reflected shortwave (SW) and longwave (LW) radiation. The satellite data provide an independent source of radiance measurements and scene identification information necessary to construct ADMs that are used to determine the daytime Earth radiation budget. To optimize spatial matching between EPIC measurements and the high-resolution composite cloud properties, LEO/GEO retrievals within the EPIC fields of view (FOV) are convolved to the EPIC point spread function (PSF) in a similar manner to the Clouds and the Earth's Radiant Energy System (CERES) Single Scanner Footprint TOA/Surface Fluxes and Clouds (SSF) product. Examples of the merged LEO/GEO/EPIC product will be presented, describing the chosen radiance and cloud properties and details of how data from the multi-satellite measurements are selected.

Duda, David P.↗

NASA NTRS1994

Two new supernova remnants in OB associations in the Large Magellanic Cloud

We discovered two extended x-ray sources in a Roentgen Satellite (ROSAT) Positron Sensitive Proportional Counter (PSPC) observation pointed at the H II region N9 in the Large Magellanic Cloud. These two sources are in the H II regions N4D and N9. The x-ray characteristics suggest that both might be supernova remnants (SNRs). Follow-up charge coupled device (CCD) images taken with interference filters show high (S II)/H-alpha ratios in the optical nebulae of these x-ray sources, confirming the presence of high velocity shocks commonly seen in SNRs. These two sources are also detected in the radio continuum at 8.55 and 4.75 GHz; both appear nonthermal compared to nearby H II regions. The confirmation of these two SNRs demonstrates that many SNRs in or near H II regions have been overlooked in previous surveys, and that the ROSAT x-ray survey combined with an optical CCD imaging survey of the Magellanic Clouds would provide the most effective way to uncover SNRs.

Smith, R. Chris↗