Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase pure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Lift Equivalence and Cancellation for Airfoil Surge–Pitch–Plunge Oscillations

A NACA 0018 airfoil in freestream velocity is oscillated in longitudinal, transverse, and angle-of-attack directions with respect to the freestream velocity, known as surge, plunge, and pitch. The lift-based equivalence method introduces phase shifts between these three motions to construct in-phase sinusoidal components for maximum lift, waveform construction. Lift cancellation is also determined with the exact negative pitch and plunge motion amplitudes found from the equivalence method to achieve out-of-phase wave destruction. Lift cancellation occurs when a combination of these motions is sought to obtain a constant lift magnitude throughout the oscillation cycle. To achieve both equivalence and cancellation of lift, a prescribed pure pitch amplitude through the Theodorsen theory equates the corresponding equivalent plunge amplitude and pitch–plunge phase shift. These Theodorsen, linear superposition findings of pitch–plunge are leveraged toward the Greenberg theory to determine a closed-form, surge–pitch–plunge solution through the addition of a surge–plunge phase shift and optimal surge amplitude for lift cancellation. The lift cancellation surge–pitch–plunge amplitudes define the equivalence amplitude investigated here and theoretically limit the experiment to combinations of the first lift harmonic of the Greenberg theory. The analytical results are then compared with experimental lift force measurements and dye visualization. Finally, the normalized lift differences due to unsteady wake and boundary-layer behavior are examined to explore the extents of the Greenberg theory for these cases of lift-based equivalence and cancellation.

42 ENGINEERING↗

Experimental and finite element investigation of the buckling characteristics of a beaded skin panel for a hypersonic aircraft

As part of NASA's continuing research into hypersonics and 85 square foot hypersonic wing test section of a proposed hypersonic research airplane was laboratory tested. The project reported on in this paper has carried the hypersonic wing test structure project one step further by testing a single beaded panel to failure. The primary interest was focused upon the buckling characteristics of the panel under pure compression with boundary conditions similar to those found in a wing mounted condition. Three primary phases of analysis are included in the report. These phases include: experimental testing of the beaded panel to failure; finite element structural analysis of the beaded panel with the computer program NASTRAN; a summary of the semiclassical buckling equations for the beaded panel under purely compressive loads. Comparisons between each of the analysis methods are also included.

Siegel, W. H.↗

Porous Ti 3 AlC 2 MAX phase enables efficient synthesis of Ti 3 C 2 T x MXene

Abstract MXenes, a large family of two‐dimensional carbides and/or nitrides, are among the most studied materials worldwide due to their great diversity of structures and compositions. Their unique properties find use in several applications. Typically, they are manufactured by selective wet‐chemical etching of layered MAX phase ceramics, which are produced nowadays primarily for MXene synthesis. However, the synthesis of MAX phases has not been changed since the time of their use in structural and high‐temperature applications, and it has not been optimized for MXene manufacturing. The main purpose of this study is to develop a porous Ti 3 AlC 2 MAX phase that can be easily ground into individual grains without time‐consuming, harsh, and tedious crushing and milling steps. Moreover, we also demonstrate the synthesis of highly porous Ti 3 AlC 2 from an inexpensive titanium sponge instead of a highly pure titanium powder and explain the mechanisms of reaction sintering and formation of porous MAX phase. MXene obtained from this MAX phase, Ti 3 C 2 Tx, shows larger flake size and higher electrical conductivity in thin films, compared to the materials produced from the costly fine titanium powder. The proposed approach may apply to the synthesis of other MAX phases as well.

Materials Science↗

Compatibility of mesophase pitch and linear low-density polyethylene for low-cost carbon fiber

Mesophase pitch and linear low-density polyethylene (LLDPE) were blended by shear mixing and extruded producing precursor fibers which were then converted to carbon fibers (CFs). LLDPE additives agglomerate within the isotropic spheres rather than uniformly dispersing throughout the entire matrix. The blends possess different thermal properties and precursor tensile properties evident by two-phase tensile stress nature not present in precursor fibers produced from pure pitch. The resultant CFs were oxidized at 280 °C for 4 h and carbonized at 1000 °C for 15 min. This process created pitch CFs with a tensile strength of 1.23 GPa and a Young’s modulus of 99 GPa. All CFs produced from blends of pitch and LLDPE possessed a tensile strength of 0.63 GPa and less. These CFs showed a microstructure slightly different from the pure pitch CFs with fractured CF cross sections revealing voids present in all blended CFs due to burnt off LLDPE stemming from carbonization. Further study into compatibilizers and new conversion processes is required to successfully blend LLDPE with mesophase pitch for the purpose of producing a new low-cost CF.

36 MATERIALS SCIENCE↗

Design Study of a Superconducting Quadrupole Magnet System Sustainable Under Dark Current Heating in ILC Main Linac

The International Linear Collider (ILC) main linac comprises a series of 12 m-long cryomodules. The cryomodule contains eight 9-cell superconducting (SC) RF (SRF) cavities and an SC quadrupole magnet combined with dipole correctors to focus and steer electron and positron beams. The magnets are installed between the SRF cavity string and at the longitudinal center of a common cryomodule/cryostat. These magnets are conductively cooled by pure aluminum channels thermally connected to a 2 K two-phase helium pipe for cooling the SRF cavities. A recent study shows that field-emitted electrons, so-called “dark current” initiated in the SRF cavities, are transmitted through the SRF cavity string and reach the SC magnet. The energy is inevitably absorbed in the SC coil due to the magnetic field, resulting in risks of a quench caused by the coil heating. We are investigating alternate magnet designs by using Nb $_{3}$ Sn or $\text{MgB}_{2}$ SC and by adding the dark current absorber surrounding the beam-pipe to realize sustainable magnet operation under the dark current heating. We report the design study of the magnet system and interfaces to the cryomodule accommodating it with the SRF cavities.

43 PARTICLE ACCELERATORS↗

Computational Analysis of the Impact of Boundary Conditions on a Particle-Laden Flow: A Case Study in a Pressurized Oxy-Coal Combustor

Designing an effective burner is vital for the development of coal combustion technologies. Because of high pressure, the volumetric fraction of the coal particles in the injected fuel in a pressurized oxy-combustion (POC) burner approaches or even exceeds the limitations allowed by the commercial computational fluid dynamics codes (e.g., Ansys Fluent). Consequently, for such high particle volumetric fractions, the interplay between the particles, the fluid flow, and the burner wall needs to be re-evaluated. The present computational work is a first step in a systematic analysis of the roles of various characteristics involved in the POC process, such as the method of particle release, its location, and the particle size. Specifically, pulverized coal is burned under an elevated pressure of 15 bar in an O 2 /CO 2 environment. A 100 kW, a POC combustor, is modeled with Ansys Fluent using the Reynolds-averaged Navier−Stokes approach. It is revealed that for this pilot-scale, pressurized burner, the gas phase flow velocity in the near-wall region exhibits anomalies. With the major focus on POC, this work aims to eliminate/reduce the impact of high particle loading on the gas-phase flow. To scrutinize the role of particle loading in the near-wall region and eliminate the impact of this velocity on POC downstream, the particle−gas interplay in the boundary layer is investigated by means of the computational simulations incorporating the coupling between the turbulent flow and the particles. It is found that the tuning of the particle release location makes the gas-phase flow velocity in the presence of particles consistent with the pure gas flow velocity profile. The particles size is also found to have a significant impact on the particle trajectory.

CFD↗

Characterizations of four specimens processed as a part of the M553 sphere forming experiment performed during the Skylab 1 and 2 flight

Four specimens identified as SL-1.3, SL-1.8, SL-1.9 and SL-2.5 were submitted for metallurgical characterization. These specimens had been processed in the M512 Facility as a part of the M553 Sphere Forming Experiment performed during the Skylab 1/2 flight. Three of these specimens, SL-1.3, SL-1.8, and SL-2.5 were designed to be melted completely by the electron beam and detach themselves from their support posts and resolidify while floating free in the near zero gravity and vacuum environment of space. Specimens SL-1.3 and SL-1.8 were completely melted, but it is believed they did not leave their posts before solidifying. Specimen SL-2.5 was only partially melted. Specimen SL-1.9 was to be completely melted and retained on a large sting which was accomplished as planned. The nominal composition of the four specimens was: (1) SL-1.3 - Ni 12% Sn; (2) SL-1.8 - Ni 30% Cu; (3) SL-1.9 - Pure Ni; and (4) SL-2.5 - Pure Ni. These four specimens have been examined according to the Phase B Characterization Plan. The results are discussed and compared with similar characterization analyses run on ground base specimens.

Hubbard, J. L.↗

Colorimetry and magnitudes of asteroids

In the present paper, 1500 UBV observations are analyzed by a new rather general multiple scattering theory which provided clear insight into previously poorly-recognized optical nature of asteroid surfaces. Thus, phase curves are shown to consist of a surface-texture controlled component, due to singly scattered light, and a component due to multiple scattering. Phase curve shapes can be characterized by a single parameter, the multiple scattering factor, Q. As Q increases, the relative importance of the opposition effect diminishes. Asteroid surfaces are particulate and strikingly similar to texture, being moderately porous and moderately rough on a scale greater than the wavelength of light. In concequence, Q (and also the phase coefficient) correlate well with geometric albedo, and there exists a purely photometric means of determining albedos and diameters.

Bowell, E.↗

"Reagentless" flow injection determination of ammonia and urea using membrane separation and solid phase basification

Flow injection analysis instrumentation and methodology for the determination of ammonia and ammonium ions in an aqueous solution are described. Using in-line solid phase basification beds containing crystalline media. the speciation of ammoniacal nitrogen is shifted toward the un-ionized form. which diffuses in the gas phase across a hydrophobic microporous hollow fiber membrane into a pure-water-containing analytical stream. The two streams flow in a countercurrent configuration on opposite sides of the membrane. The neutral pH of the analytical stream promotes the formation of ammonium cations, which are detected using specific conductance. The methodology provides a lower limit of detection of 10 microgram/L and a dynamic concentration range spanning three orders of magnitude using a 315-microliters sample injection volume. Using immobilized urease to enzymatically promote the hydrolysis of urea to produce ammonia and carbon dioxide, the technique has been extended to the determination of urea.

NASA Center JSC↗

LISA and LISA Pathfinder: Gravitational Wave Observation in Space

The Laser Interferometer Space Antenna (LISA) is a planned NASA-ESA gravitational wave observatory in the frequency range of 0.1 mHz--100 mHz. This observation band is inaccessible to ground-based detectors due to fluctuations in the Earth gravitational field. Gravitational wave sources for LISA include galactic binaries, mergers of supermassive black-hole binaries, extreme-mass-ratio inspirals, and cosmology backgrounds and bursts. LISA is a constellation of three spacecraft separated by 5 million km in an equilateral triangle, whose center follows the Earth in a heliocentric orbit with an orbital phase offset of 20 degrees. Challenging technology is required to ensure pure geodetic trajectories of the six onboard test masses, whose distance fluctuations will be measured by interspacecraft laser interferometers with picometer accuracy. LISA Pathfinder is an ESA-launched technology demonstration mission of key LISA subsystems such as spacecraft control with micronewton thrusters, test mass drag-free control, and precision laser interferometry between free-flying test masses. Ground testing of hardware of the Gravitational Reference Sensor and Optical Metrology subsystems of LISA Pathfinder is currently ongoing. A detailed description of the two missions and an overview of current investigations conducted by the community will be discussed. The current status in development and implementation of LISA Pathfinder pre-flight systems and latest results of the ongoing ground testing efforts will also be presented.

Guzman, Felipe↗

Laser Interferometry for Gravitational Wave Observation: LISA and LISA Pathfinder

The Laser Interferometer Space Antenna (LISA) is a planned NASA-ESA gravitational wave observatory in the frequency range of 0.1mHz-100mHz. This observation band is inaccessible to ground-based detectors due to the large ground motions of the Earth. Gravitational wave sources for LISA include galactic binaries, mergers of supermasive black-hole binaries, extreme-mass-ratio inspirals, and possibly from as yet unimagined sources. LISA is a constellation of three spacecraft separated by 5 million km in an equilateral triangle, whose center follows the Earth in a heliocentric orbit with an orbital phase offset oF 20 degrees. Challenging technology is required to ensure pure geodetic trajectories of the six onboard test masses, whose distance fluctuations will be measured by interspacecraft laser interferometers with picometer accuracy. LISA Pathfinder is an ESA-launched technology demonstration mission of key LISA subsystems such us spacecraft control with micro-newton thrusters, test mass drag-free control, and precision laser interferometry between free-flying test masses. Ground testing of flight hardware of the Gravitational Reference Sensor and Optical Metrology subsystems of LISA Pathfinder is currently ongoing. An introduction to laser interferometric gravitational wave detection, ground-based observatories, and a detailed description of the two missions together with an overview of current investigations conducted by the community will bc discussed. The current status in development and implementation of LISA Pathfinder pre-flight systems and latest results of the ongoing ground testing efforts will also be presented

Guzman, Felipe↗

Multi-Dimensional Spectroscopy with Intense Entangled Beams: Entanglement-Enabled Phase Matching in a Collinear Beam Geometry

The experimental realization of quantum molecular spectroscopy with entangled photons remains challenging owing to the low signal-to-noise ratio resulting from the use of low-flux entangled photons. High-flux entangled photons via intense entangled beams can be used to improve the signal-to-noise ratio, but the presence of unentangled photons contaminates the quantum signal stemming from entangled photons. Here, we demonstrate how intense entangled beams can be used in multi-dimensional spectroscopy while retaining the advantage of photon entanglement. Our approach is broadly applicable to odd-ordered nonlinear spectroscopies, and it generates purely quantum spectroscopic signals. The proposed approach allows the recording of desired phase-matched signals even in a collinear beam geometry, which lifts the requirement of complicated beam geometry setups for phase matching in multi-dimensional spectroscopies.

Absorption spectroscopy↗

Reactions of silicon-based ceramics in mixed oxidation chlorination environments

The reaction of silicon-based ceramics with 2 percent Cl2/Ar and 1 percent Cl2/1 percent to 20 percent O2/Ar at 950 C was studied with thermogravimetric analysis and high-pressure mass spectrometry. Pure Si, SiO2, several types of SiC, and Si3N4 were examined. The primary corrosion products were SiCl4(g) and SiO2(s) with smaller amounts of volatile silicon oxychlorides. The reactions appear to occur by chlorine penetration of the SiO2 layer, and gas-phase diffusion of the silicon chlorides away from the sample appears to be rate limiting. Pure SiO2 shows very little reaction with Cl2, SiC with excess Si is more reactive than the other materials with Cl2, whereas SiC with excess carbon is more reactive than the other materials with Cl2/O2. Si3N4 shows very little reaction with Cl2. These differences are explained on the basis of thermodynamic and microstructural factors.

Marra, John E.↗

Study of solid molecular deuterium D 2 growth under gas pressure

The injection of high-speed cryogenic pellets made of frozen hydrogen-isotopes, represents to date the most effective method to fuel magnetically confined thermonuclear fusion plasmas. Additionally, the injection of very large pellets composed of cryogenic solid of some suitable impurity (typically a noble-gas such as H 2 , Ne, or H 2 /Ne, D 2 /Ne mixtures), shattered in relatively small fragments just before entering the plasma, seems to be the most promising method to reduce the damage risks for the plasma-facing components in case of a plasma disruption. This technology, known as "Shattered Pellet Injection" (SPI), allows to spread out the plasma energy and mitigate possible damage to the in-vessel components, as well as to densify the plasma to suppress the formation of runaway electrons, and/or dissipate their energy. Several techniques to produce and launch cryogenic pellets have been investigated in the past decades. "Pipe gun" injectors are reliable and relatively simple devices are still commonly used today. They make use of single- or two-stage pneumatic light-gas guns to accelerate the pellet at high speeds. In these injectors, the cryogenic pellets are formed “ in situ ” (i.e., inside the launching barrel), by de-sublimating them directly from the gas phase, i.e., at temperatures and pressures below those of the triple point. The simplest case is pure deuterium pellets ($\mathcal{T}$ < 18.7 K, $\mathcal{P}$ < 171.3 hPa). The production of good quality solid deuterium, capable of withstanding the mechanical stress during the acceleration of the pellets, is a key issue. To this end the phase transition of deuterium from gas to solid (and vice versa) is modeled with extensive molecular-dynamics (MD) simulations. Furthermore, the solid growth from the gas phase is simulated in an ample range of temperatures and pressures, to find the best compromise between growth velocity and mechanical properties of the resulting solid system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Enhancing Direct Electrochemical CO 2 Electrolysis by Introducing A-Site Deficiency for the Dual-Phase Pr(Ca)Fe(Ni)O 3-δ Cathode

High-temperature CO 2 electrolysis via solid oxide electrolysis cells (CO 2 –SOECs) has drawn special attention due to the high energy convention efficiency, fast electrode kinetics, and great potential in carbon cycling. However, the development of cathode materials with high catalytic activity and chemical stability for pure CO 2 electrolysis is still a great challenge. In this work, A-site cation deficient dual-phase material, namely (Pr 0.4 Ca 0.6 ) x Fe 0.8 Ni 0.2 O 3-δ (PCFN, x = 1, 0.95, and 0.9), has been designed as the fuel electrode for a pure CO 2 –SOEC, which presents superior electrochemical performance. Among all these compositions, (Pr 0.4 Ca 0.6 ) 0.95 Fe 0.8 Ni 0.2 O 3-δ (PCFN95) exhibited the lowest polarization resistance of 0.458 Ω cm 2 at open-circuit voltage and 800 °C. The application of PCFN95 as the cathode in a single cell yields an impressive electrolysis current density of 1.76 A cm -2 at 1.5 V and 800 °C, which is 76% higher than that of single cells with stoichiometric Pr 0.4 Ca 0.6 Fe 0.8 Ni 0.2 O 3-δ (PCFN100) cathode. The effects of A-site deficiency on materials' phase structure and physicochemical properties are also systematically investigated. Such an enhancement in electrochemical performance is attributed to the promotion of effective CO 2 adsorption, as well as the improved electrode kinetics resulting from the A-site deficiency.

30 DIRECT ENERGY CONVERSION↗

A mass–momentum consistent coupling for mesh-adaptive two-phase flow simulations

Here, we present a novel mass-momentum consistent coupling between a geometric volume-of-fluid scheme and an incompressible flow solver with differing directional-splitting approaches. The advection of the volume fraction is performed using a direction-split algorithm, whereas the momentum advection algorithm uses a traditional unsplit, fractional-step approach. Both algorithms employ finite-volume discretizations based on Cartesian meshes. In solving the mass-momentum consistency problem, momentum fluxes at the cell faces are weighted by the density fluxes based on the already advected volume fraction. The success of our approach lies on introducing a Favre-averaged velocity interpolation at the liquid/gas interface along with a minmod slope limiter. Mesh-convergence studies show that when the minmod slope limiter is used, the two-phase solver retains an accuracy between first and second order, but when a purely upwind scheme is considered, its accuracy drops to first order. Finally, after considering several validation problems, the solver is shown to agree well with reference numerical and experimental data while retaining its robustness and efficiency.

97 MATHEMATICS AND COMPUTING↗

Computing diffraction patterns of microstructures from phase-field simulations

The diffraction pattern of a material contains information not only on the crystal structures of its constituting phases, but also on its mesoscale spatial distributions of phases, grains, and ferroelastic, ferroelectric, and ferromagnetic domains. While diffraction patterns from experiments such as X-ray diffraction are presented in the reciprocal or Fourier space, mesoscale microstructure models such as the phase-field method naturally produce real-space images of spatial distribution of chemical composition, structural, and ferroic domains. Although one could rather readily compute the Fourier amplitudes of chemical and structural domain distributions generated by mesoscale simulations, they only contain information about the length scale and alignment of the real-space chemical and structure domains. Therefore, a direct comparison between diffraction experiments and mesoscale microstructure simulations is not possible. Here, we develop a theoretical approach to directly compute the crystal diffraction patterns of microstructures predicted by phase-field simulations. In particular, we consider five representative examples of microstructure patterns involving purely compositional domains, a single pair of tetragonal twin structures, multiple twin variants in a hexagonal system, ferroelectric polar vortices, and polycrystalline grains. The results are compared with previous experimental observations as well as X-ray diffraction experiments performed in the present study. Furthermore, the theoretical framework allows one to directly connect material microstructures and diffraction patterns predicted from phase-field simulations and the corresponding diffraction patterns from experiments, and thus providing guidance to experimental diffraction characterization and interpretation of microstructures.

36 MATERIALS SCIENCE↗

2D in-Plane Ordered MXene Nanosheets Derived from (Mo 2/3 Er 1/3 ) 2 AlC Rare-Earth i-MAX for Energy Storage Applications

MXenes have become one of the most versatile families of two-dimensional (2D) materials due to their high conductivity, hydrophilicity, and remarkable electrochemical performance. This has stimulated intense efforts to design and synthesize MXenes, including structurally unique in-plane ordered 2D MXenes called i-MXenes. Here, we have synthesized the quaternary rare earth (RE)-based i-MAX phase (Mo 2/3 Er 1/3 ) 2 AlC using an arc melting method, and the corresponding 2D i-MXene was then obtained through a LiF/HCl soft etching process. Literature studies have shown that Al and the RE element are etched out during the etching process, leading to the formation of pure vacancy-ordered Mo1.33C 2D i-MXene. However, our investigation reveals that upon exposure to a fluorine solution, the i-MAX phase forms RE fluoride impurities, which are challenging to remove through HCl−DI water washing and persist in the final product, resulting in impure Mo 1.33 C@Er i-MXene. These results were confirmed by various characterizations such as X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, and scanning transmission electron microscopy. Although the Mo 1.33 C@Er electrode showed a 24-fold increase in specific capacitance compared to its parent i-MAX phase, it still exhibited a high charge-transfer resistance arising from the insulating nature of RE fluoride byproducts, which adversely influence the overall capacitance behavior of the synthesized 2D Mo 1.33 C@Er i-MXenes. This study contributes to identifying pathways for the preparation of pure 2D i-MXenes from RE-based i-MAX phases and developing improved synthesis methods. With additional process optimization, the 2D i-MXene holds a strong potential for electrochemical energy storage applications. Additionally, the electronic structures of Mo 1.33 C were theoretically studied using first-principles density functional theory calculations, which revealed that pristine Mo 1.33 C is metallic, and this metallic nature is preserved even with −O, −F, and mixed functionalization.

chemical structure↗