Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oxygen vacancy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Tuning electronic properties in LaNiO 3 thin films by B-site Cu-substitution

Resistors are essential parts of futuristic all-oxide electronic architectures, yet easily overlooked due to their apparent simplicity. In this study, design of thin films with specific resistance spanning six orders of magnitude by partial substitution of Cu 2+ for Ni 3+ in the metallic conductor LaNiO 3 is shown. Substitution is attainable across the whole composition range using atomic layer deposition on LaAlO 3 (100) pc substrates, however with some inclusion of Ruddlesden–Popper RP1 phase (La 2 CuO 4 ) at high levels of Cu-incorporation. The thermal stability of the resistance is based on a metal–insulator transition that evolves from non-existent for LaNiO 3 to above room-temperature for high Cu 2+ substitution. This provides further insight in the metal–insulator transition found for correlated rare-earth nickelates, especially the type of transition seen for ultrathin films of LaNiO 3 that is usually attributed to oxygen vacancy formation. Materials with variable resistivity and metal–insulator-transition temperatures are key in the design of futuristic electronics such as metal–insulator-transition-driven neuromorphic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A thermochemical study of iron aluminate-based materials: a preferred class for isothermal water splitting

The use of hydrogen as a renewable fuel has been stymied by our inability to produce it cleanly and economically. The conventional solar thermochemical approach considers a two-step redox cycle with benchmark ceria or a perovskite in a temperature swing configuration, where reduction occurs at a temperature much higher than oxidation. Isothermal redox cycling is feasible and avoids the solid–solid heat recuperation and material stability challenges associated with temperature swing; yet, it has long been thought to be inefficient due to the thermodynamic unfavorability of operating the exothermic oxidation reaction at higher temperatures. Here, in this work, we show that this setback can be overcome with iron aluminate-based spinel solid solutions that preferentially exhibit large changes in oxygen content within the range of oxygen partial pressures expected in large-scale systems. We explain the experimental results with a defect model that assigns cation – not oxygen – vacancies as the predominant point defect responsible for their superior water-splitting ability. When operated isothermally at 1400 °C, the iron aluminate-based materials demonstrate a capacity for hydrogen production greater than 500 μmol g–1 and, as a result, remain viable even under high conversion conditions (i.e., pO 2 < 500 : 1 H 2 O : H 2 ), exceeding the hydrogen yields of ceria and two attractive perovskite candidates following a 400 °C (or less) temperature swing. Isothermal water splitting using iron aluminate-based materials opens the door for more simple, robust, and efficient production of renewable hydrogen.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Understanding methanol dissociative adsorption and oxidation on amorphous oxide films

Interactions between a transition metal (oxide) catalyst and a support can tailor the number and nature of active sites, for instance in the methanol oxidation reaction.In this report we use ambient pressure X-ray photoelectron spectroscopy (AP-XPS) to identify and compare the surface adsorbates that form on amorphous metal oxide films that maximize such interactions. Considering Al (1−x) M x O y (M = Fe or Mn) films at a range of methanol : oxygen gas ratios and temperatures, we find that the redox-active transition metal site (characterized by methoxy formation) dominates dissociative methanol adsorption, while basic oxygen sites (characterized by carbonate formation) play a lesser role. Product detection, however, indicates complete oxidation to carbon dioxide and water with partial oxidation products (dimethyl ether) comprising a minor species. Comparing the intensity of methoxy and hydroxyl features at a fixed XPS chemical shift suggests methanol deprotonation during adsorption in oxygen rich conditions for high transition metal content. However, increasing methanol partial pressure and lower metal site density may promote oxygen vacancy formation and the dehydroxylation pathway, supported by a nominal reduction in the oxidation state of iron sites. These findings illustrate that AP-XPS and mass spectrometry together are powerful tools in understanding metal–support interactions, quantifying and probing the nature of catalytic active sites, and considering the link between electronic structure of materials and their catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

CO oxidation on MgAl 2 O 4 supported Ir n : activation of lattice oxygen in the subnanometer regime and emergence of nuclearity-activity volcano

CO oxidation on Pt group metals is affected by the metal size and reducibility of the oxide support. In this study, we report that Ir supported on MgAl 2 O 4 , traditionally considered non-reducible, exhibits properties similar to reducible oxides when the Ir size is in the subnanometer regime. To show this effect, we synthesized subnanometer Ir clusters and compared their properties to single atoms and nanoparticles (1–1.5 nm). The CO oxidation activity is highest on Ir 0.6–0.8nm while showing distinctly different reaction orders in CO and O 2 (0, +0.4), than single atoms (1, 0) and nanoparticles (–1, +1). Microcalorimetry, in situ X-ray absorption, and infrared spectroscopies show that the CO-saturated Ir 0.6–0.8nm clusters could adsorb and activate O 2 despite binding CO more strongly than nanoparticles. Density functional theory calculations on CO saturated Ir 4 clusters suggest that the increased activity is due to the ability to activate O 2 on oxygen vacancies at the Ir–MgAl 2 O 4 interface. The findings show the important effect of the metal nuclearity on the support and catalyst properties and can guide future design of CO oxidation catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Higher loadings of Pt single atoms and clusters over reducible metal oxides: application to C–O bond activation

We develop higher loadings of isolated noble metal atoms and clusters on a mildly reducible metal oxide. Here we demonstrate the approach for Pt supported on TiO 2 and confirmed it by XRD, AC-HAADF-STEM, CO-FTIR, XAS, and XPS. Density functional theory calculations rationalize the experimental stability and the IR shifts using mixtures of CH 3 I and CO. The redispersed catalysts are thermally stable in inert gas or H 2 and afford enhanced selectivity and activity in hydrodeoxygenation reactions compared to metal nanoparticles by creating surface oxygen vacancies that promote C–O cleavage without side reactions. Higher metal loadings, e.g., 1%Pt/TiO 2 , on the oxide surface profoundly increase the activity of the bare oxide catalyst tenfold compared to ultra-low loadings typically used for single atom catalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Chemical and structural evolutions of Li–Mn-rich layered electrodes at different current densities

Although the two active redox centers in Li-rich cathodes, including the anionic and cationic contributions, can enable Li-ion batteries to achieve outstanding specific energy, their behaviors at different current densities have not been clarified. In this report we provide a comparative study of transition metals (TMs) and oxygen redox activities by directly accessing their oxidation states in Li-rich materials operated at very different current rates. Our data reveal that the oxidation of oxygen in the near-surface region is at the same level for electrodes cycled with a wide range of current rates, indicating a reaction gradient of lattice oxygen redox reactions. The oxidation process of lattice oxygen is found to be dynamically compatible with that of the TMs. Combining the results of first principles calculations and complementary experimental findings, we propose a detailed mechanism of structural distortion from octahedral Li to tetrahedral Li and the role of oxygen vacancy in Li + diffusion. It is found that fast delithiation occurring at high current densities can easily cause local structural transformation, leading to a limited Li + diffusion rate and consequently suppressing rate capability.

25 ENERGY STORAGE↗
DOE OSTI2022

Tuning the Co/Fe ratio in BaCo x Fe 0.8– x Zr 0.1 Y 0.1 O 3– δ , a promising triple ionic and electronic conducting oxide, to boost electrolysis and fuel cell performance

The triple conducting oxide BaCo 0.4 Fe 0.4 Zr 0.1 Y0.1O 3–δ (BCFZY4411), which accommodates simultaneous transport of protons, oxygen ions, and p-type electronic carriers, has been intensively investigated in recent years as a high-performance positive electrode material for fuel cell and electrolysis applications. The heavy Co and Fe-based transition metal doping in BCFZY4411 ensures adequate electrical conductivity while the multiple oxidation states of Co and Fe assist the electrocatalytic and redox ability. Despite the considerable role of Co and Fe transition metal doping in controlling electrochemical activity, however, the study of alternative BCFZY compositions with varying Co/Fe ratios has not yet been pursued. Here, we evaluate the electrochemical performance of a series of BaCo x Fe 0.8–x Zr 0.1 Y0.1O 3–δ compositions with varying Co/Fe ratio (x = 0.1, 0.2, 0.4, 0.6, 0.7) and use oxygen ion tracer diffusion and in situ high-temperature X-ray diffraction to investigate the effect of Co/Fe ratio on electrocatalytic activity, electronic conductivity, oxygen ion incorporation and transport kinetics, and thermomechanical behavior. We find that Co-rich BCFZY7111 yields the highest performance due to exceptionally high oxygen vacancy diffusion and shows a lower and more linear thermal expansion behavior compared to Fe-rich compositions. A protonic ceramic button cell incorporating a BCFZY7111 positive electrode yields a peak power density of 695 mW cm –2 under fuel cell mode and an electrolysis current density of 1976 mA cm –2 at 1.4 V at 600 °C, underscoring the promise of this new BCFZY electrode composition.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2022

Resolving atomistic structure and oxygen evolution activity in nickel antimonates

The oxygen evolution reaction (OER) requires electrodes that are not only catalytically active, but also stable under harsh electrochemical environments to enable efficient, durable technologies. Our recent report of a stable amorphous Ni 0.5 Sb 0.5 O z OER photoanode established Ni–Sb–O as an important system for computational understanding of both the structural and catalytic behavior of these complex oxides. In the present work we show that Ni x Sb 1-x O z with x > 0.33 crystallizes into a previously unknown phase. Guided by experimental X-ray diffraction, here, we use density functional theory calculations to perform a prototype phase search to identify a broad family of stable and metastable mixed rutile and hexagonal-like phases for x = 0.33, 0.50, and 0.66 compositions. For the identified phases, we predict favorable oxygen vacancy formation energies for Ni-rich compositions under the reducing synthesis conditions which match measured Ni K-edge X-ray absorption spectra. The calculated overpotential for the most active site decreases with increasing Ni content, from 0.91 V (x = 0.33) to 0.49 V (x = 0.66), which captures the experimentally observed trend. We find the active site changes from the Ni–O–Sb bridge to a Ni–O–Ni bridge at increasing Ni concentrations, rather than the commonly studied singly under-coordinated sites. Finally, detailed Pourbaix analysis of the identified phases show excellent electrochemical stability, consistent with experimentally measured low metal ion concentrations in the electrolyte of photoelectrochemical cells. Collectively, our consideration of an ensemble of structures enables identification of the most catalytically prolific structural motifs, aiding the understanding of crystalline and amorphous catalysts and elucidating the co-optimization of activity and durability in nickel antimonates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Effects of heteroatom doping on hydrogen uptake in tungsten oxide

Redox-active transition metal oxides (TMOs) that can undergo proton-insertion coupled electron transfer (PICET) are promising candidates for catalyzing molecular conversion reactions which require the transfer of hydrogen atoms (or the thermochemical equivalent, H + , e − ). Herein, we studied the effects of isovalent (Mo 6+ ) and aliovalent (V 5+ and Nb 5+ ) heteroatom doping on the electrochemical PICET behavior of monoclinic tungsten oxide (WO 3 ). Cyclic voltammetry in aqueous acidic electrolytes shows that the addition of redox-active heteroatoms (Mo 6+ and V 5+ ) leads to systematic shifts in redox couple half-wave potentials (E 1/2 ), broadening, and an overall decrease in the current response. Conversely, the non-redox active heteroatom (Nb 5+ ) only reduces the current response with no observable peak-current broadening. This broadening is attributed to changes in the proton binding affinities of oxygen in different chemical environments, i.e., bridging different pairs of redox-active transition metal cations. We determined the hydrogen bond dissociation free energy (H BDFE) values to elucidate the thermodynamic effect of heteroatom substitution. Density functional theory calculations reveal a differentiation in the hydrogen binding and oxygen vacancy formation energies between heteroatom doped structures. The PICET-induced structural phase transitions of the pristine and doped samples were further probed with operando electrochemical X-ray diffraction (EC-XRD) and with ex situ chemical reduction. The broadening of the potential-dependent current response with increased heteroatom doping manifests in the operando EC-XRD results as prolonged structural regions where multiple hydrogen bronze phases exist and the appearance of cubic bronze phases at lower degrees of reduction compared to pristine WO 3 .

Holzapfel, Noah P. [North Carolina State Universit↗
DOE OSTI2020

On the redistribution of charge in La 0.7 Sr 0.3 CrO 3 /La 0.7 Sr 0.3 MnO 3 multilayer thin films

The atomic and electronic structures of La 0.7 Sr 0.3 MnO 3 (LSMO)/La 0.7 Sr 0.3 CrO 3 (LSCO) multilayer thin films are investigated using aberration corrected scanning transmission electron microscopy (STEM) imaging and spectroscopy. Atomic resolution high angle annular dark-field reveals that LSMO layers have an expanded out-of-plane lattice parameter compared to compressed LSCO layers, contrasting with x-ray diffraction measurements. The expansion is found to result from preferential oxygen vacancy formation in LSMO during STEM sample preparation as determined by electron energy-loss spectroscopy. The La/Sr atom column intensity is also found to oscillate by about 4% between the LSMO and LSCO layers, indicative of La/Sr concentration variation. Using energy-dispersive x-ray spectroscopy in combination with image simulations, we confirm the La/Sr inhomogeneity and elucidate the origin of charge redistribution within the multilayer. These results illuminate the sensitivity of the technique to subtle structural, chemical, and electronic features that can arise to compensate charge imbalances in complex oxide heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Disentangling the evolution of electrons and holes in photoexcited ZnO nanoparticles

The evolution of charge carriers in photoexcited room temperature ZnO nanoparticles in solution is investigated using ultrafast ultraviolet photoluminescence spectroscopy, ultrafast Zn K-edge absorption spectroscopy, and ab initio molecular dynamics (MD) simulations. The photoluminescence is excited at 4.66 eV, well above the band edge, and shows that electron cooling in the conduction band and exciton formation occur in <500 fs, in excellent agreement with theoretical predictions. The x-ray absorption measurements, obtained upon excitation close to the band edge at 3.49 eV, are sensitive to the migration and trapping of holes. They reveal that the 2 ps transient largely reproduces the previously reported transient obtained at 100 ps time delay in synchrotron studies. In addition, the x-ray absorption signal is found to rise in ∼1.4 ps, which we attribute to the diffusion of holes through the lattice prior to their trapping at singly charged oxygen vacancies. Indeed, the MD simulations show that impulsive trapping of holes induces an ultrafast expansion of the cage of Zn atoms in <200 fs, followed by an oscillatory response at a frequency of ∼100 cm−1, which corresponds to a phonon mode of the system involving the Zn sub-lattice.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Intrinsic and extrinsic conduction contributions at nominally neutral domain walls in hexagonal manganites

Conductive and electrostatic atomic force microscopy (cAFM and EFM) are used to investigate the electric conduction at nominally neutral domain walls in hexagonal manganites. The EFM measurements reveal a propensity of mobile charge carriers to accumulate at the nominally neutral domain walls in ErMnO3, which is corroborated by cAFM scans showing locally enhanced direct current conductance. Our findings are explained based on the established segregation enthalpy profiles for oxygen vacancies and interstitials, providing a microscopic model for previous, seemingly disconnected observations ranging from insulating to conducting behavior. In addition, we observe variations in conductance between different nominally neutral walls that we attribute to deviations from the ideal charge-neutral structure within the bulk, leading to a superposition of extrinsic and intrinsic contributions. Our study clarifies the complex transport properties at nominally neutral domain walls in hexagonal manganites and establishes the possibility to tune their electronic response based on oxidation conditions, opening the door for domain-wall-based sensor technology.

Schultheiß, J. (ORCID:0000000173891295)↗
DOE OSTI2020

Thermal evolution of ferroelectric behavior in epitaxial Hf 0.5 Zr 0.5 O 2

In this paper, we report a cryogenic-temperature study on the evolution of the ferroelectric properties of epitaxial Hf 0.5 Zr 0.5 O 2 thin films on silicon. Wake-up, endurance, and fatigue of these films are found to be intricately correlated, strongly hysteretic, and dependent on available thermal energy. Field-dependent measurements reveal a decrease in polarization with temperature, which has been determined not to be an intrinsic change of the material property, rather a demonstration of the increase in the coercive bias of the material. Our findings suggest that a deficiency in thermal energy suppresses the mobility of defects presumed to be oxygen vacancies during wake-up and trapped injected charge during fatigue, which is responsible for polarization evolution during cycling. This permits accelerated wake-up and fatigue effects at high temperatures where thermal energy is abundant but delays these effects at cryogenic temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2020

On the role of the zirconia/ceria interface in the degradation of solid oxide electrolysis cells

Gd-doped Ceria (GDC) barrier layers are widely used in solid oxide electrolysis cells to prevent reactions between the Y-stabilized Zirconia (YSZ) electrolyte and oxygen electrode. In some cases, electrolysis operation causes fracture near the GDC/YSZ interface. Here, we explain this effect using a numerical calculation, showing that a peak oxygen pressure is observed near the GDC/YSZ interface during electrolysis operation. Moreover, GDC/YSZ interdiffusion and possible zirconate phase formation occurring during electrode firing yield a low oxygen ion conductivity region that introduces a much higher peak oxygen partial pressure at the interdiffusion layer/YSZ interface, thereby exacerbating degradation. The results indicate that the peak pressure can be reduced and, thereby, damage can be mitigated by altering processing in order to minimize interdiffusion, decreasing the GDC layer thickness, and reducing oxygen electrode polarization resistance or altering electrolyte transport properties, e.g., changing the Gd doping level of GDC to increase the oxygen vacancy diffusivity.

Physics↗
DOE OSTI2021

Lessons learned from first-principles calculations of transition metal oxides

Transition metal oxides (TMOs) are an important class of materials with diverse applications, ranging from memristors to photoelectrochemical cells. First-principles calculations are critical for understanding these complex materials at an atomic level and establishing relationships between atomic and electronic structures, particularly for probing quantities difficult or inaccessible to experiment. Here, we discuss computational strategies used to understand TMOs by focusing on two examples, a photoanode material, BiVO4, and an oxide for low-power electronics, La1−xSrxCoO3. We highlight key aspects required for the modeling of TMOs, namely, the descriptions of how oxygen vacancies, extrinsic doping, the magnetic state, and polaron formation impact their electronic and atomic structures and, consequently, many of the observed properties.

Vo, Hien (ORCID:0000000158315599)↗