Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optical switch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Illumination frustums for photoconductive switches

Methods and devices for illuminating a photoconductive switch consisting of an optically actuated photoconductive material situated between two electrodes are described. Light from a light source is coupled to an optical fiber, which is attached to a frustum, the other side of which is proximate to the photoconductive switch. Light from the optical fiber enters the frustum, spreads out, and enters the photoconductive switch via the top-side electrode. Some of the light is absorbed, while the remaining light reflects off the bottom-side electrode, travels back through the photoconductive switch, and any unabsorbed light reenters the frustum. The geometry of the frustum is configured such that most of the light reflects back into the switch itself with only a negligible fraction escaping from the optical fiber, which advantageously results in near total utilization of the light.

Rushford, Michael↗

Multistates and Polyamorphism in Phase-Change K 2 Sb 8 Se 13

The phase-change (PC) materials in the majority of optical data storage media in use today exhibit a fast, reversible crystal -> amorphous phase transition that allows them to be switched between on (1) and off (0) binary states. Solid-state inorganic materials with this property are relatively common, but those exhibiting an amorphous -> amorphous transition called polyamorphism are exceptionally rare. K 2 Sb 8 Se 13 (KSS) reported here is the first example of a material that has both amorphous -> amorphous polyamorphic transition and amorphous -> crystal transition at easily accessible temperatures (227 and 263 degrees C, respectively). The transitions are associated with the atomic coordinative preferences of the atoms, and all three states of K 2 Sb 8 Se 13 are stable in air at 25 degrees C and 1 atm. All three states of K 2 Sb 8 Se 13 exhibit distinct optical bandgaps, E-g = 1.25, 1.0, and 0.74 eV, for the amorphous-II, amorphous-I, and crystalline versions, respectively. The room-temperature electrical conductivity increases by more than 2 orders of magnitude from amorphous-I to -II and by another 2 orders of magnitude from amorphous-II to the crystalline state. This extraordinary behavior suggests that a new class of materials exist which could provide multistate level systems to enable higher-order computing logic circuits, reconfigurable logic devices, and optical switches.

amorphous-amorphous transition↗

Deceleration of molecules in a supersonic beam by the optical field in a low-finesse cavity

We study the dynamics of a supersonic molecular beam in a low-finesse optical cavity and demonstrate that most molecules in the beam can be decelerated to zero central velocity by the intracavity optical field in a process analogous to electrostatic Stark deceleration. We show that the rapid switching of the optical field for slowing the molecules is automatically generated by the cavity-induced dynamics. We further show that approx1% of the molecules can be optically trapped at a few millikelvin in the same cavity.

74 ATOMIC AND MOLECULAR PHYSICS↗

Development of a switched integrator amplifier for high-accuracy optical measurements

In the field of low flux optical measurements, the development and use of large area silicon detectors is becoming more frequent. The current/voltage conversion of their photocurrent presents a set of problems for traditional transimpedance amplifiers. The switched integration principle overcomes these limitations. We describe the development of a fully characterized current-voltage amplifier using the switched integrator technique. Two distinct systems have been developed in parallel at the United Kingdom's National Physical Laboratory (NPL) and Czech Metrology Institute (CMI) laboratories. We present the circuit theory and best practice in the design and construction of switched integrators. In conclusion the results achieved and future developments are discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Externally-Modulated Electro-Optically Coupled Detector Architecture for Nuclear Physics Instrumentation

A new laser-based externally-modulated electro-optically coupled detector (EOCD) architecture is being developed to enable high-density readout for radiation detectors with accurate analog radiation pulse shape and timing preservation. Unlike digital conversion before electro-optical modulation, the EOCD implements complete analog optical signal modulation and multiplexing in its detector front-end. The result is a compact, high performance detector readout that can be both radiation tolerant and immune to magnetic fields. In this work, the feasibility of EOCD was explored by constructing a two-wavelength laser-based externally-modulated EOCD, and testing analog pulse shape preservation and wavelength-division multiplexing (WDM) crosstalk. Comparisons were first made between the corresponding initial pulses and the electro-optically coupled analog pulses. This confirmed an excellent analog pulse preservation over $ sim {hbox {29}}% $ of the modulator’s switching voltage range. Optical spectrum analysis revealed less than $-{hbox {14}}~hbox{dB}$ crosstalk with 1.2 nm WDM wavelength bandgap, and provided insight on experimental conditions that could lead to increased inter-wavelength crosstalk. Further discussions and previous research on the radiation tolerance and magnetic field immunity of the candidate materials were also given, and quantitative device testing is proposed in the future.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Digital Feedback Control Of Servomotor Via Fiber Optics

Optoelectronic system effects closed-loop control of shaft angles of servomotors. Includes full-duplex fiber-optic link carrying feedforward and feedback signals, between digital motor-control circuits and modules containing motor-power-switching circuits. Fiber optics provide immunity to noise and rapid transmission of data. Features particularly advantageous in robots.

Dawson, Reginald↗

Highly efficient, versatile, self-Q-switched, high-repetition-rate microchip laser generating Ince–Gaussian modes for optical trapping

Lasers operating in the Ince-Gaussian (IG) mode have potential applications for optical manipulation of microparticles and formation of optical vortices, as well as for optical trapping and optical tweezers. Versatile, self-Q-switched, high-peak-power, high-repetition-rate Cr, Nd:YAG microchip lasers operating in the IG mode are implemented under tilted, tightly focused laser-diode pumping. An average output power of over 2 W is obtained at an absorbed pump power of 6.4 W. The highest optical-to-optical efficiency of 33.2% is achieved at an absorbed pump power of 3.9 W. Laser pulses with a pulse energy of 7.5 μJ, pulse width of 3.5 ns and peak power of over 2 kW are obtained. A repetition rate up to 335 kHz is reached at an absorbed pump power of 5.8 W. Highly efficient, versatile, IG-mode lasers with a high repetition rate and a high peak power ensure a better flexibility in particle manipulation and optical trapping. (control of laser radiation parameters)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electron-impact ionization and electron attachment cross sections of radicals important in transient gaseous discharges

Electron-impact ionization and electron attachment cross sections of radicals and excited molecules were measured using an apparatus that consists of an electron beam, a molecular beam and a laser beam. The information obtained is needed for the pulse power applications in the areas of high power gaseous discharge switches, high energy lasers, particle beam experiments, and electromagnetic pulse systems. The basic data needed for the development of optically-controlled discharge switches were also investigated. Transient current pulses induced by laser irradiation of discharge media were observed and applied for the study of electron-molecule reaction kinetics in gaseous discharges.

Lee, Long C.↗

Temperature Effects on the Optical Parameters of a Passively Q-Switched Diode-Side Pumped Yb,Er-Laser

Temperature effects on photoluminescence and absorption spectra of the active medium (LGS-DE erbium phosphate glass) and passive Q-switch (MgAl{sub 2}O{sub 4}:Co{sup 2+} crystal) of a diode-side pumped Yb,Er-laser are studied. The obtained data are applied to an analysis of the spectral and energetic characteristics of compact erbium emitters. It is established that the dominant generation channel in the temperature range 233–328 K is the optical transition between lower Stark sublevels of Er{sup 3+} states {sup 4}I{sub 13/2} and {sup 4}I{sub 15/2} (λ = 1532.0–1533.9 nm). A rate-equation system taking into account thermal population of Stark sublevels of states {sup 4}I{sub 13/2} and {sup 4}I{sub 15/2} is proposed to describe the experimental temperature dependence of the threshold absorbed power of the pumping radiation. This system and the lasing threshold enable modeling of Yb,Er-emitter output energetic and temporal characteristics.

36 MATERIALS SCIENCE↗

Polarization-selective optical transmission through a plasmonic metasurface

We present the design, fabrication, and experimental characterization of a nanoslit-based metasurface that offers polarization-selective optical transmission for advanced imaging applications. The metasurface consists of an array of meta-atoms, constructed with two orthogonally coupled subwavelength apertures. Highly enhanced optical transmission was achieved by selective excitation of surface plasmon waves on the metasurface. By rotating the orientation of the linearly polarized incident beam, switching of enhanced optical transmission bands through the metasurface was experimentally demonstrated. This demonstration is a significant step towards developing advanced multispectral imaging devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photonic topological phase transition on demand

On-demand, switchable phase transitions between topologically nontrivial and trivial photonic states are demonstrated. Specifically, it is shown that the integration of a two-dimensional array of coupled ring resonators within a thermal heater array enables unparalleled control over topological protection of photonic modes. Importantly, auxiliary control over a spatial phase modulation opens up a way to guide topologically protected edge modes along generated virtual boundaries. The proposed approach can lead to practical realizations of topological phase transitions in many photonic applications, including topologically protected photonic memory/logic devices, robust optical modulators, and switches.

36 MATERIALS SCIENCE↗

Dual cathode system for electron beam instruments

An electron beam source having a single electron optical axis is provided with two coplanar cathodes equally spaced on opposite sides from the electron optical axis. A switch permits selecting either cathode, and a deflection system comprised of electromagnets, each with separate pole pieces equally spaced from the plane of the cathodes and electron optical axis, first deflects the electron beam from a selected cathode toward the electron optical axis, and then in an opposite direction into convergence with the electron optical axis. The result is that the electron beam from one selected cathode undergoes a sigmoid deflection in two opposite directions, like the letter S, with the sigmoid deflection of each being a mirror image of the other.

Bradley, James G.↗

Atomic force microscopy deep trench and sidewall imaging with an optical fiber probe

We report a method to measure critical dimensions of micro- and nanostructures using the atomic force microscope (AFM) with an optical fiber probe (OFP). This method is capable of scanning narrow and deep trenches due to the long and thin OFP tip, as well as imaging of steep sidewalls with unique profiling possibilities by laterally tilting the OFP without any modifications of the optical lever. A switch control scheme is developed to measure the sidewall angle by flexibly transferring feedback control between the Z- and Y-axis, for a serial scan of the horizontal surface (raster scan on XY-plane) and sidewall (raster scan on the YZ-plane), respectively. In experiments, a deep trench with tapered walls (243.5 μm deep) and a microhole (about 14.9 μm deep) have been imaged with the orthogonally aligned OFP, as well as a silicon sidewall (fabricated by deep reactive ion etching) has been characterized with the tilted OFP. Moreover, the sidewall angle of TGZ3 (AFM calibration grating) was accurately measured using the switchable scan method.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fast infrared response of YBCO thin films

The response to short infrared pulses of some epitaxial YBCO films prepared by sputter deposition and by electron-beam evaporation is reported. The response is found to be essentially bolometric on the ns timescale, with some indirect hints of nonequilibrium electron transport on the ps scale. Fast switching could be obtained either by biasing the switch close to the critical current or by cooling the film below about 20 K. These results are encouraging for potential application to a high-current optically-triggered opening switch.

Ballentine, P. H.↗

146.4 W end-pumped Ho : YAG slab laser with two crystals

We report a high-power two-crystal Ho : YAG slab laser. A maximum cw output power of 146.4 W at a wavelength of 2090.7 nm is achieved, corresponding to a slope efficiency of 66.0% and an optical efficiency of 61.2%. The beam quality factor is measured to be M{sup 2} < 2.2 at different output power levels. With an acousto-optic Q-switch, a maximum average output power of 141.3, 137.7 and 134.5 W are obtained at pulse repetition rates of 20, 30 and 50 kHz, respectively. Minimum pulse widths of 39 ns, 44 ns and 74 ns are achieved for the above pulse repetition rates. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synchronous micromechanically resonant programmable photonic circuits

Abstract Programmable photonic integrated circuits (PICs) are emerging as powerful tools for control of light, with applications in quantum information processing, optical range finding, and artificial intelligence. Low-power implementations of these PICs involve micromechanical structures driven capacitively or piezoelectrically but are often limited in modulation bandwidth by mechanical resonances and high operating voltages. Here we introduce a synchronous, micromechanically resonant design architecture for programmable PICs and a proof-of-principle 1×8 photonic switch using piezoelectric optical phase shifters. Our design purposefully exploits high-frequency mechanical resonances and optically broadband components for larger modulation responses on the order of the mechanical quality factor Q m while maintaining fast switching speeds. We experimentally show switching cycles of all 8 channels spaced by approximately 11 ns and operating at 4.6 dB average modulation enhancement. Future advances in micromechanical devices with high Q m , which can exceed 10000, should enable an improved series of low-voltage and high-speed programmable PICs.

42 ENGINEERING↗

Switching dynamics and ultrafast inversion control of quantum dots for on-chip optical information processing

We demonstrate dynamical near-complete inversion switching of a two-level quantum dot driven by picosecond optical pulses in a bimodal photonic band gap (PBG) waveguide at microwatt power levels. This is enabled by a sharp steplike discontinuity in the local (electromagnetic) density of states (LDOS) provided by a cutoff in one of the two waveguide modes. The atomic Bloch vector equations in this colored vacuum are derived using dressed state description of the atomic density operator in the presence of phonon-mediated dephasing. Instead of assuming phenomenological decay rates, we derive explicit expressions for decay terms of bare state atomic dipole moments and population in the Born-Markov approximation from a master equation approach. Giant Mollow splitting of the atom level due to subwavelength light localization of strong driving pulse causes the time-dependent Mollow bands to straddle the LDOS jump, leading to different radiative decay rates in the upper and lower Mollow sidebands. This results in remarkable field-dependent spontaneous emission and dipolar dephasing rates, combined with a novel 'vacuum structure' term in the Bloch equations. Our Bloch equations predict ultrafast high-contrast inversion switching that is activated and deactivated by picosecond pulse trains detuned below and above the atomic resonance, respectively. This dynamic inversion is due to the rapid rise in relaxation rates as the pulse amplitude rises, causing the Bloch vector to switch from antiparallel to parallel alignment with the pulse 'torque vector'. Subsequent near-complete inversion occurs through an adiabatic following process retained long after the pulse amplitude subsides and the system reverts to slow relaxation. For a 1% inhomogeneously broadened distribution of quantum dot with average of 100 D dipole moment, driven by 1.5 mum picosecond pulses and coupled to a cutoff mode LDOS jump with radiative emission rates of gamma{sub high}=2.5 THz and gamma{sub low}=5 GHz, a large average population switching contrast of 0.5 is demonstrated with a phonon dephasing rate gamma{sub p}=0.5 THz. A 1.6 fJ control pulse is required per switching operation and a 30 muW pulse train is sufficient to maintain the inversion. This switchable gain (loss) segment of the PBG waveguide can be used to controllably amplify (absorb) signal pulses conveying optical information. This provides a robust mechanism for ultrafast multiwavelength channel all-optical logic in PBG microchips.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonlinear manipulation of surface plasmons on graphene-TMDC Bragg reflectors

In this study, we benefit from the nonlinear optical tunability of the graphene-transition metal dichalcogenide (G-TMDC) heterostructure and the strong confinement of the electromagnetic fields of surface plasmon polaritons (SPPs) on graphene in order to propose a highly tunable nonlinear optical Bragg reflector. Recently, two-dimensional (2D) TMDCs are the subject of intense researches because of their nonlinear optical properties at near infrared wavelengths which are very intriguing for various optical applications. We choose two kinds of 2D-TMDCs, MoSe{sub 2} and WSe{sub 2}, with the strongest second order optical nonlinearity at near infrared range to properly design the periodic variation of the propagating SPP waves on the graphene layer. We utilize theoretical method of quantum electrostatic heterostructure to compute the dielectric function of graphene-TMDCs. Different nonlinearities of two TMDCs lead to noticeable tuning of the full width at half maximum (FWHM) and the central Bragg wavelength of the reflector which let design various optical devices. We design an add/drop filter, a nonlinear switch, and an AND/OR optical logic gate based on our proposed Bragg reflector. Our finite difference time domain numerical and transfer matrix analytical results reveal that by increment of the optical intensity up to 6 MW/cm{sup 2} which is below the pulse damage threshold of graphene, due to the second order nonlinearity, a 10-nm red-shift in central Bragg wavelength is observed and the 20-nm FWHM at linear regime decreases to 1.5 nm. The SPP intensities of 0.8 MW/cm{sup 2} and 1.53 MW/cm{sup 2} fulfill the requirements for AND and OR logical operations with 57 and 66.51 dB extinction ratios, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗