Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “molecular dynamic (MD) simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Analysis of the time-of-flight neutron scattering cross-section data for light water measured at the SEQUOIA spectrometer, Spallation Neutron Source (SNS)

Thermal neutron scattering cross-section data for light water available in the major nuclear data libraries observes significant differences especially at reactor operating temperatures. During the past few years there has been a renewed interest in reviewing the existing thermal scattering models and generating more accurate and reliable thermal scattering cross sections using existing experimental data and in some cases based on Molecular Dynamics (MD) simulations. There is a need for performing new time-of-flight experiments at high temperatures and pressures, to have a better understanding of the physics involved in the scattering process that could help improve the existing TSL data.Lack of experimental thermal scattering data for light water at high temperatures led to a new measurement campaign within the INSIDER project at the Institut de radioprotection et de sûreté nucléaire (IRSN). Double differential scattering cross section for light water have been measured at the SEQUOIA spectrometer based at the Spallation Neutron Source (SNS), Oak Ridge National Laboratory, United States. Several measurements have been carried out at different temperatures and pressures corresponding to liquid light water. Measurements at five different incident neutron energies Ei (8, 60, 160, 280 and 800 meV) have been carried out to help exploring different regions of the frequency spectrum. This paper presents the analysis of the dynamic structure factor and the derived frequency spectrum of light water. The analysis of the experimental data would provide one with better confidence, the behavior of thermal scattering cross sections for light water at high temperatures, knowledge of which is very important for the design of novel reactors as well as existing pressurized water reactors.

Jaiswal, V↗
DOE OSTI2020

Thermal boundary conductance between high thermal conductivity boron arsenide and silicon

Thermal boundary conductance (TBC) is important for heat dissipation in light-emitting diodes (LEDs). In this study, we predicted the TBC between the high thermal conductivity boron arsenide (BAs) and silicon (Si) by nonequilibrium molecular dynamics (MD) simulations. From the thermal conductivity accumulation function with respect to phonon frequency, the dominant phonon frequencies for heat conduction in BAs are extremely different from those in Si. However, our nonequilibrium MD simulations indicated that the TBC of the BAs/Si interface was still high compared to most other interfaces, even though there was a major frequency mismatch in the thermal conductivity accumulation function between BAs and Si. The primary reason for the high TBC is the overlap of phonon density of states between BAs and Si in the frequency range of 5–8 THz. The range of predicted TBC of the BAs/Si interface was between 200 and 300 MW/m2 K in the temperature range of 300–700 K, and the values of the TBC were not sensitive to the temperature. We also found that the TBCs in Si/BAs and Si/Ge interfaces were close to each other considering the simulation uncertainty. This work indicates BAs as an excellent material for heat dissipation across the interfaces.

Wei, Zhiyong (ORCID:000000018686451X)↗
DOE OSTI2020

Evaluating diffusion and the thermodynamic factor for binary ionic mixtures

Molecular dynamics (MD) simulations are a powerful tool for the calculation of transport properties in mixtures. Not only are MD simulations capable of treating multicomponent systems, they are also applicable over a wide range of temperatures and densities. In plasma physics, this is particularly important for applications such as inertial confinement fusion. While many studies have focused on the effect of plasma coupling on transport properties, here we focus on the effects of mixing. We compute the thermodynamic factor, a measure of ideal/non-ideal mixing, for three binary ionic mixtures. Here, we consider mixtures of hydrogen and carbon, hydrogen and argon, and argon and carbon, each at 500 randomly generated state points in the warm dense matter and plasma regimes. The calculated thermodynamic factors indicate different mixing behavior across phase space, which can significantly affect the corresponding mutual diffusion coefficients. As MD simulations are still computationally expensive, we apply modern data science tools to predict the thermodynamic factor over a large phase space. Further, we propose a more accurate approximation to the mutual diffusion coefficient than the commonly applied Darken relation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Reaction processes at step edges on S-decorated Cu(111) and Ag(111) surfaces: MD analysis utilizing machine learning derived potentials

We report a variety of complexation, reconstruction, and sulfide formation processes can occur at step edges on the {111} surfaces of coinage metals (M) in the presence of adsorbed S under ultra-high vacuum conditions. Given the cooperative many-atom nature of these reaction processes, Molecular Dynamics (MD) simulation of the associated dynamics is instructive. However, only quite restricted Density Functional Theory (DFT)-level ab initio MD is viable. Thus, for M = Ag and Cu, we instead utilize the DeePMD framework to develop machine-learning derived potentials, retaining near-DFT accuracy for the M–S systems, which should have broad applicability. These potentials are validated by comparison with DFT predictions for various key quantities related to the energetics of S on M(111) surfaces. The potentials are then utilized to perform extensive MD simulations elucidating the above diverse restructuring and reaction processes at step edges. Key observations from MD simulations include the formation of small metal–sulfur complexes, especially MS 2 ; development of a local reconstruction at A-steps featuring an S-decorated {100} motif; and 3D sulfide formation. Additional analysis yields further information on the kinetics for metal–sulfur complex formation, where these complexes can strongly enhance surface mass transport, and on the propensity for sulfide formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Unlocking the unfolded structure of ubiquitin: Combining time-resolved x-ray solution scattering and molecular dynamics to generate unfolded ensembles

The unfolding dynamics of ubiquitin were studied using a combination of x-ray solution scattering (XSS) and molecular dynamics (MD) simulations. The kinetic analysis of the XSS ubiquitin signals showed that the protein unfolds through a two-state process, independent of the presence of destabilizing salts. In order to characterize the ensemble of unfolded states in atomic detail, the experimental XSS results were used as a constraint in the MD simulations through the incorporation of x-ray scattering derived potential to drive the folded ubiquitin structure toward sampling unfolded states consistent with the XSS signals. We detail how biased MD simulations provide insight into unfolded states that are otherwise difficult to resolve and underscore how experimental XSS data can be combined with MD to efficiently sample structures away from the native state. Our results indicate that ubiquitin samples unfolded in states with a high degree of loss in secondary structure yet without a collapse to a molten globule or fully solvated extended chain. Finally, we propose how using biased-MD can significantly decrease the computational time and resources required to sample experimentally relevant nonequilibrium states.

Chemistry↗
DOE OSTI2025

Prediction of vacancy defect diffusion paths in high entropy alloys via machine learning on molecular dynamics data

Identifying the diffusion path of point defects is a critical step in understanding their evolution and the mechanisms of related phenomena. Defect diffusion occurs at small length and time scales, with impacts on material properties that may continue to evolve over ns to μs, ms, and the continuum scale (s, min, etc., and cm, m, etc.). The time scale accessible to molecular dynamics (MD) simulations is limited by small step sizes, typically in the fs range. Thus, surrogate models of MD simulations through machine learning (ML)-based algorithms are of great interest, especially for complex systems such as high entropy alloys (HEAs). In this work, dynamics governing vacancy migration in HEA were approximated with graph convolutional network (GCN) models as ansatzes for kinetic Monte Carlo (KMC) rate catalogs. Network design considered that diffusion in crystalline solids generally depends on interactions between defects and their immediate neighbor atoms. Graphs represented the vacancy surroundings, MD-generated trajectories provided training and comparison datasets, and unsupervised GCN models approximated interatomic dynamics governing vacancy migration in HEAs as ansatzes for KMC. A proof-of-concept model trained on MD data for the Fe, Ni, Cr, Co, and Cu HEA environment was used with two different neighbor interactions to assess the feasibility of training a GCN to predict vacancy defect transition rates in the HEA environment. The resulting setup rapidly generated MD-formatted synthetic trajectories based on dynamics learned from the MD training set, with a time acceleration of roughly two orders of magnitude and a similar diffusion coefficient to MD observations. Additionally, Nudged Elastic Band (NEB) calculations were performed on randomly generated FeNiCrCoCu HEA structures to determine vacancy migration barriers across nearest-neighbor sites. Transition probabilities for each jump, categorized by atomic type, were extracted from these calculations. NEB-based and GCN-based approaches led to similar outcomes.

Reimer, C↗
DOE OSTI2026

Modeling the behavior of concentrated aqueous HNO 3 using machine learning interatomic potentials

We develop two multi-defect machine learning interatomic potentials (MLIPs) trained at the BLYP-D2 and PBE-D3 density functional theories using the DeepMD-kit, allowing for the investigation of structural and thermodynamic properties of nitric acid over a wide range of concentrations via molecular dynamics (MD) simulations. We directly compute the degree of dissociation, α, and pK a from MD simulations, revealing that HNO 3 behaves as a weaker acid at higher concentrations, noting that our standard-state pK a value is in excellent agreement with the experimental one. In general, good agreement is observed with experimental results such as α and density outside the training dataset, with only modest deviations at low-to-medium concentrations. We benchmark our custom multi-defect DeepMD MLIPs against foundational models MACE-MP0 and MACE-OFF23. The foundation models capture some aspects of HNO 3 /NO 3 − solvation in concentrated nitric acid but show noticeable density errors and miss subtle structural features relevant to spectroscopy, whereas the bespoke DeepMD MLIPs yield more compact solvation shells, reproduce density-concentration trends, and run ∼12–15× faster than MACE-MP0. Although classical FFs are still more efficient and match experimental densities better, they lack chemical reactivity and thus cannot predict α or pK a , underscoring the need for system-specific reactive MLIPs beyond universal MLIPs.

Dinpajooh, Mohammadhasan [Pacific Northwest Nation↗
DOE OSTI2026

Full-stack Quantification of Variability in Predicting Ion Transport Properties using Machine-learned Interatomic Potentials

Machine-learned interatomic potentials (MLIPs) have become the state-of-the-art for performing accurate, scalable molecular dynamics (MD) simulations. It is therefore crucial to understand and quantify the reliability of MLIPs for downstream property predictions. Uncertainty in predicted properties can arise from limitations in first-principles training data, intrinsic MLIP model errors in representing the data, and the statistical noise introduced during subsequent MD simulations. Using ion transport in Li7P3S11 as a case study, we systematically assess the impact of training set size and selection, neural network stochasticity, and MD sampling statistics on predicted diffusivity and activation energy. We find that when using equivariant MLIP architectures with standard MD protocols, uncertainty arising from MD sampling dominates over model-induced errors. In contrast, MLIP errors relative to the underlying first-principles data are consistently minor. Given this, there are two main routes to improving the accuracy of predictions based on MLIP potentials: adopting higher accuracy reference data generation methods, and improving the MD sampling statistics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

How cholesterol stiffens unsaturated lipid membranes

Cholesterol is an integral component of eukaryotic cell membranes and a key molecule in controlling membrane fluidity, organization, and other physicochemical parameters. It also plays a regulatory function in antibiotic drug resistance and the immune response of cells against viruses, by stabilizing the membrane against structural damage. While it is well understood that, structurally, cholesterol exhibits a densification effect on fluid lipid membranes, its effects on membrane bending rigidity are assumed to be nonuniversal; i.e., cholesterol stiffens saturated lipid membranes, but has no stiffening effect on membranes populated by unsaturated lipids, such as 1,2-dioleoyl- sn -glycero-3-phosphocholine (DOPC). This observation presents a clear challenge to structure–property relationships and to our understanding of cholesterol-mediated biological functions. Here, using a comprehensive approach—combining neutron spin-echo (NSE) spectroscopy, solid-state deuterium NMR ( 2 H NMR) spectroscopy, and molecular dynamics (MD) simulations—we report that cholesterol locally increases the bending rigidity of DOPC membranes, similar to saturated membranes, by increasing the bilayer’s packing density. All three techniques, inherently sensitive to mesoscale bending fluctuations, show up to a threefold increase in effective bending rigidity with increasing cholesterol content approaching a mole fraction of 50%. Our observations are in good agreement with the known effects of cholesterol on the area-compressibility modulus and membrane structure, reaffirming membrane structure–property relationships. The current findings point to a scale-dependent manifestation of membrane properties, highlighting the need to reassess cholesterol’s role in controlling membrane bending rigidity over mesoscopic length and time scales of important biological functions, such as viral budding and lipid–protein interactions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Stress-dependent activation entropy in thermally activated cross-slip of dislocations

Cross-slip of screw dislocations in crystalline solids is a stress-driven thermally activated process essential to many phenomena during plastic deformation, including dislocation pattern formation, strain hardening, and dynamic recovery. Molecular dynamics (MD) simulation has played an important role in determining the microscopic mechanisms of cross-slip. However, due to its limited timescale, MD can only predict cross-slip rates in high-stress or high-temperature conditions. The transition state theory can predict the cross-slip rate over a broad range of stress and temperature conditions, but its predictions have been found to be several orders of magnitude too low in comparison to MD results. This discrepancy can be expressed as an anomalously large activation entropy whose physical origin remains unclear. Here, we resolve this discrepancy by showing that the large activation entropy results from anharmonic effects, including thermal softening, thermal expansion, and soft vibrational modes of the dislocation. We expect these anharmonic effects to be significant in a wide range of stress-driven thermally activated processes in solids.

Science & Technology - Other Topics↗
DOE OSTI2024

Structural basis of transcription: RNA polymerase II substrate binding and metal coordination using a free-electron laser

Catalysis and translocation of multisubunit DNA-directed RNA polymerases underlie all cellular mRNA synthesis. RNA polymerase II (Pol II) synthesizes eukaryotic pre-mRNAs from a DNA template strand buried in its active site. Structural details of catalysis at near-atomic resolution and precise arrangement of key active site components have been elusive. Here, we present the free-electron laser (FEL) structures of a matched ATP-bound Pol II and the hyperactive Rpb1 T834P bridge helix (BH) mutant at the highest resolution to date. The radiation-damage-free FEL structures reveal the full active site interaction network, including the trigger loop (TL) in the closed conformation, bonafide occupancy of both site A and B Mg 2+ , and, more importantly, a putative third (site C) Mg 2+ analogous to that described for some DNA polymerases but not observed previously for cellular RNA polymerases. Molecular dynamics (MD) simulations of the structures indicate that the third Mg 2+ is coordinated and stabilized at its observed position. TL residues provide half of the substrate binding pocket while multiple TL/BH interactions induce conformational changes that could allow translocation upon substrate hydrolysis. Consistent with TL/BH communication, a FEL structure and MD simulations of the T834P mutant reveal rearrangement of some active site interactions supporting potential plasticity in active site function and long-distance effects on both the width of the central channel and TL conformation, likely underlying its increased elongation rate at the expense of fidelity.

Science & Technology - Other Topics↗
DOE OSTI2024

Molecular-level design of alternative media for energy-saving pilot-scale fibrillation of nanocellulose

The outstanding mechanical properties, light weight, and biodegradability of cellulose nanofibrils (CNFs) make them promising components of renewable and sustainable next-generation reinforced composite biomaterials and bioplastics. Manufacturing CNFs at a pilot scale requires disc-refining fibrillation of dilute cellulose fibers in aqueous pulp suspensions to shear the fibers apart into their nanodimensional forms, which is, however, an energy-intensive process. Here, in this study, we used atomistic molecular dynamics (MD) simulation to examine media that might facilitate the reduction of interactions between cellulose fibers, thereby reducing energy consumption in fibrillation. The most suitable medium found by the simulations was an aqueous solution with 0.007:0.012 wt.% NaOH:urea, and indeed this was found in pilot-scale experiments to reduce the fibrillation energy by ~21% on average relative to water alone. The NaOH:urea-mediated CNFs have similar crystallinity, morphology, and mechanical strength to those formed in water. The NaOH and urea act synergistically on CNFs to aid fibrillation but at different length scales. NaOH deprotonates hydroxyl groups leading to mesoscale electrostatic repulsion between fibrils, whereas urea forms hydrogen bonds with protonated hydroxyl groups thus disrupting interfibril hydrogen bonds. This suggests a general mechanism in which an aqueous medium that contains a strong base and a small organic molecule acting as a hydrogen-bond acceptor and/or donor may be effectively employed in materials processes where dispersion of deprotonable polymers is required. The study demonstrates how atomic-detail computer simulation can be integrated with pilot-scale experiments in the rational design of materials processes for the circular bioeconomy.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Prediction of carbon nanostructure mechanical properties and the role of defects using machine learning

Graphene-based nanostructures hold immense potential as strong and lightweight materials, however, their mechanical properties such as modulus and strength are difficult to fully exploit due to challenges in atomic-scale engineering. This study presents a database of over 2,000 pristine and defective nanoscale CNT bundles and other graphitic assemblies, inspired by microscopy, with associated stress–strain curves from reactive molecular dynamics (MD) simulations using the reactive INTERFACE force field (IFF-R). These 3D structures, containing up to 80,000 atoms, enable detailed analyses of structure-stiffness-failure relationships. By leveraging the database and physics- and chemistry-informed machine learning (ML), accurate predictions of elastic moduli and tensile strength are demonstrated at speeds 1,000 to 10,000 times faster than efficient MD simulations. Hierarchical Graph Neural Networks with Spatial Information (HS-GNNs) are introduced, which integrate chemistry knowledge. HS-GNNs as well as extreme gradient boosted trees (XGBoost) achieve forecasts of mechanical properties of arbitrary carbon nanostructures with only 3 to 6% mean relative error. The reliability equals experimental accuracy and is up to 20 times higher than other ML methods. Predictions maintain 8 to 18% accuracy for large CNT bundles, CNT junctions, and carbon fiber cross-sections outside the training distribution. The physics- and chemistry-informed HS-GNN works remarkably well for data outside the training range while XGBoost works well with limited training data inside the training range. The carbon nanostructure database is designed for integration with multimodal experimental and simulation data, scalable beyond 100 nm size, and extendable to chemically similar compounds and broader property ranges. The ML approaches have potential for applications in structural materials, nanoelectronics, and carbon-based catalysts.

Winetrout, Jordan J.↗
DOE OSTI2025

The importance of accounting for the Tolman correction to surface tension for nucleation and growth modeling of Fe clusters

Gibbs free energies of clusters are required for predictive modeling of cluster growth during condensation of a cooling vapor. Here, we present a straightforward method of calculating free energies of cluster formation using the data from molecular dynamics (MD) simulations. We apply this method to iron clusters having from 2 to 100 atoms. The energies obtained are verified by comparing to an MD-simulated equilibrium cluster size distribution in a sub-saturated vapor. We show that these free energies differ significantly from those obtained with a commonly used spherical cluster approximation, which relies on a surface tension coefficient of a flat surface, as it is used in the classical nucleation theory (CNT). We show that the spherical cluster approximation in CNT can be improved by using a cluster-size-dependent Tolman correction for the surface tension. The Tolman length and effective surface tension values were derived for iron clusters, and they significantly differ from the commonly used experimentally measured values. This improved approximation does not account for geometric magic number effects responsible for spikes and troughs in densities of neighbor cluster sizes. Nonetheless, it allows to more accurately model cluster formation from a cooling vapor. It better reproduces the condensation timeline, overall shape of the cluster size distribution, average cluster size, and the distribution width. In contrast, using a constant surface tension coefficient (as done in CNT) resulted in incorrect condensation dynamics and cluster size distributions. The analytical expression for cluster nucleation rate from CNT was updated to account for the size-dependence of cluster surface tension.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Effects of interlayer spacing and applied pressure on the lanthanide transport in MoS 2 -based two-dimensional channels

Rare-earth elements (REEs) are critical to modern industry but difficult to separate due to their subtle and monotonic changes in physicochemical properties. MoS 2 -based two-dimensional (2D) materials offer novel opportunities for enhancing REE separation, exhibiting a distinct volcano-shaped transport performance distribution that peaks at Sm 3+ . However, the specific contributions of thermodynamic and kinetic factors to ion transport within 2D confinement remain unclear. In this study, we conducted a series of non-equilibrium all-atom molecular dynamics (MD) simulations to explore the effects of interlayer spacing and external pressure on the transport of lanthanide ions in Å-scale acetate functionalized 2D MoS 2 (MoS 2 -COOH) channels. We examined ion entry and permeation rates, water flux, dehydration, and binding modes. The simulation results reveal that the transport trends of lanthanide ions are jointly driven by the dehydration degree and the relative-binding strengths of ions to water and to the acetate within the 2D channels. Notably, the dehydration pattern of lanthanide ions during permeation is closely linked to kinetic factors. Overall, this study provides a detailed atomistic understanding of the mechanisms underlying lanthanide ion transport under confinement. These findings point to the significant potential for tuning confinement and chemical functionalization within Å-scale channels for more efficient REE separation.

2D channels↗
DOE OSTI2021

Beryllium-driven structural evolution at the divertor surface

Erosion of the beryllium first wall material in tokamak reactors has been shown to result in transport and deposition on the tungsten divertor. Experimental studies of beryllium implantation in tungsten indicate that mixed W–Be intermetallic deposits can form, which have lower melting temperatures than tungsten and can trap tritium at higher rates. To better understand the formation and growth rate of these intermetallics, we performed cumulative molecular dynamics (MD) simulations of both high and low energy beryllium deposition in tungsten. In both cases, a W–Be mixed material layer (MML) emerged at the surface within several nanoseconds, either through energetic implantation or a thermally-activated exchange mechanism, respectively. While some ordering of the material into intermetallics occurred, fully ordered structures did not emerge from the deposition simulations. Targeted MD simulations of the MML to further study the rate of Be diffusion and intermetallic growth rates indicate that for both cases, the gradual re-structuring of the material into an ordered intermetallic layer is beyond accessible MD time scales(≤1 μs). However, the rapid formation of the MML within nanoseconds indicates that beryllium deposition can influence other plasma species interactions at the surface and begin to alter the tungsten material properties. Therefore, beryllium deposition on the divertor surface, even in small amounts, is likely to cause significant changes in plasma-surface interactions and will need to be considered in future studies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Disentangling cation effects on ion mobility and structure in ionic liquid electrolytes

Ionic liquids (ILs) are low-temperature molten salts, where ion transport is primarily governed by ion–ion interactions. Yet, the impact of organic IL cations on critical electrolyte properties such as ion dissociation and overall transport behavior in lithium-salt-doped ILs remains poorly understood. Moreover, despite their critical role in designing IL-based electrolytes for energy storage applications, ion–ion interactions and ion-specific transport under an applied electrical potential are seldom quantified, largely due to the unique experimental and computational challenges involved. Herein, we compare transport properties obtained using 1 H, 7 Li, and 19 F pulsed-field gradient nuclear magnetic resonance (NMR) and electrophoretic NMR (eNMR) with those measured by electrochemical impedance spectroscopy. Non-equilibrium molecular dynamics (MD) simulations and eNMR confirm the presence of negatively charged [Li(TFSI) n ] (1−n) aggregates that migrate towards the positive electrode, resulting in negative lithium transference numbers. Equilibrium MD simulations reveal a vehicular Li ion transport mechanism facilitated by long-lived aggregates with Li + cations strongly bound to multiple TFSI − anions. Finally, we observe an inverse relationship between the apparent charge of the TFSI − anion in the neat IL, which is dictated by the IL cation, and Li + transport in the salt-doped systems. This highlights the opportunity to tune electrolyte performance by tailoring cation chemistry.

Li-ion batteries↗