Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mixed effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

Grand Valley Ecological Forecasting : Assessing Trends in Pinyon-Juniper Habitat Relative to Drought, Beetle Infestation, Wildland Fires, and Treatment to Plan Future Management Strategies

Drought, beetle infestation, and more frequent wildfires are changing the composition and distribution of the pinyon-juniper woodland and sagebrush ecosystems of the Grand Valley in western Colorado. Land managers must consider short- and long-term goals for restoration as well as budgetary and personnel limitations after such disturbances. Satellite remote sensing can provide long-term and continuous vegetation monitoring to assess where restoration is needed most and where treatment practices are most likely to succeed. Harnessing Earth observation data, our team set out to observe trends in disturbances and the distribution of pinyon-juniper woodlands and sagebrush communities of National Park Service (NPS) and Bureau of Land Management (BLM) lands within the Grand Valley. We used imagery from the Moderate Resolution Imaging Spectroradiometer (MODIS) aboard the Aqua and Terra satellites, and Landsat sensors to map landcover change within these ecosystems from 1984-2021. Additionally, we analyzed disturbed areas and treatment sites to understand their effect on long-term vegetation health and recovery. Results showed that pinyon-juniper woodland has expanded in extent more than other landcover types, indicating woody encroachment into sagebrush ecosystems. We also found that wildfire disturbances had lasting impacts up to 20 years post-disturbance. Pre-fire treatment practices showed mixed results regarding their effectiveness at stopping fires and promoting post-fire recovery. These results will provide context to public land managers in the Grand Valley when developing management plans, ecological monitoring locations, and implementing treatment practices for future disturbances.

Garrett Powers↗
NASA NTRS1976

A Monte-Carlo simulation of galactic cosmic ray effects in the lunar regolith

A Monte-Carlo soil mixing computer code was used to evaluate isotopic effects induced by galactic cosmic rays in samples on the top surface of the lunar regolith and in lunar core tubes. For surface samples, good agreement was found between theoretical predictions of Ne-21 concentrations, neutron fluences, and Xe-131/Xe-126 ratios, and the corresponding observations.

Langevin, Y.↗
NASA NTRS1989

Effects of transverse shear on large deflection random response of symmetric composite laminates with mixed boundary conditions

Nonlinear equations of motion of symmetrically laminated anisotropic plates are derived considering von Karman strains and transverse shear effects. Using a single-mode Galerkin procedure, the nonlinear modal equation is obtained. The direct equivalent linearization method is employed for solution of this equation. The effects of transverse shear on large deflection vibration of laminated plates with mixed boundary support conditions under random excitation are studied. Mean-square deflections and mean-square inplane strains are obtained for symmetric graphite-epoxy laminates. Using equilibrium equations and the continuity requirements, the mean-square transverse shear stresses are calculated. The results obtained will be useful in the sonic fatigue design of composite aircraft panels. The analysis is presented in detail for plates with two opposing edges simply supported and the remaining edges clamped.

Prasad, C. B.↗
NASA NTRS1988

Acoustically excited heated jets. 3: Mean flow data

This is Part 3 of a report on the excitability of heated jets under the influence of acoustic excitation. The effects of upstream internal acoustic excitation on jet mixing were described in Part 1. Part 2 described the effects of external excitation on flow mixing. Part 3 contains quantitative results from the measurements of mean Mach number and temperature and consists of radial profiles and centerline distributions measured at selected jet operating conditions for internally excited and unexcited jets. The mean flow data are presented in both graphical and tabulated forms. For the sake of completeness, this part contains temperature probe calibration curves also.

Lepicovsky, J.↗
NASA NTRS1994

Effects of fiber, matrix, and interphase on carbon fiber composite compression strength

The major goal of this project was to obtain basic information on compression failure properties of carbon fiber composites. To do this, we investigated fiber effects, matrix effects, and fiber/matrix interface effects. Using each of nine fiber types, we prepared embedded single-fiber specimens, single-ply specimens, and full laminates. From the single-fiber specimens, in addition to the standard fragmentation test analysis, we were able to use the low crack density data to provide information about the distribution of fiber flaws. The single-ply specimens provided evidence of a correlation between the size of kink band zones and the quality of the interface. Results of the laminate compression experiments mostly agreed with the results from single-ply experiments, although the ultimate compression strengths of laminates were higher. Generally, these experiments showed a strong effect of interfacial properties. Matrix effects were examined using laminates subjected to precracking under mixed-mode loading conditions. A large effect of precracking conditions on the mode 1 toughness of the laminates was found. In order to control the properties of the fiber/matrix interface, we prepared composites of carbon fiber and polycarbonate and subjected these to annealing. The changes in interfacial properties directly correlated with changes in compression strength.

Nairn, John A.↗
NASA NTRS2016

Including Finite Surface Span Effects in Empirical Jet-Surface Interaction Noise Models

The effect of finite span on the jet-surface interaction noise source and the jet mixing noise shielding and reflection effects is considered using recently acquired experimental data. First, the experimental setup and resulting data are presented with particular attention to the role of surface span on far-field noise. These effects are then included in existing empirical models that have previously assumed that all surfaces are semi-infinite. This extended abstract briefly describes the experimental setup and data leaving the empirical modeling aspects for the final paper.

Jet↗
NASA NTRS2016

Including Finite Surface Span Effects in Empirical Jet-Surface Interaction Noise Models

The effect of finite span on the jet-surface interaction noise source and the jet mixing noise shielding and reflection effects is considered using recently acquired experimental data. First, the experimental setup and resulting data are presented with particular attention to the role of surface span on far-field noise. These effects are then included in existing empirical models that have previously assumed that all surfaces are semi-infinite. This extended abstract briefly describes the experimental setup and data leaving the empirical modeling aspects for the final paper.

Aircraft↗
NASA NTRS2016

Including Finite Surface Span Effects in Empirical Jet-Surface Interaction Noise Models

The effect of finite span on the jet-surface interaction noise source and the jet mixing noise shielding and reflection effects is considered using recently acquired experimental data. First, the experimental setup and resulting data are presented with particular attention to the role of surface span on far-field noise. These effects are then included in existing empirical models that have previously assumed that all surfaces are semi-infinite. This extended abstract briefly describes the experimental setup and data leaving the empirical modeling aspects for the final paper.

Aircraft↗
NASA NTRS1992

Evolution of solar wind fluctuations and the influence of turbulent 'mixing'

We present various numerical and analytical solutions for the transport of solar wind turbulence. The model used takes into account the effects of convection, expansion, and wave propagation, as well as the recently illuminated effects of (non-WKB) 'mixing' terms. The radial evolution of the fluctuating kinetic energy, magnetic energy, and normalized cross helicity is computed, and, it is demonstrated that in appropriate limits the solutions converge to the WKB forms. In the general case, solutions which differ substantially from those predicted by WKB theory are obtained. The degree of turbulent 'mixing' shows considerable dependence on the nature of the turbulence, giving rise to varying levels, at 1 AU, of the ratio of 'inward' and 'outward' fluctuation energies and the ratio of kinetic to magnetic energies in the fluctuations. The transport properties described here may provide at least a partial explanation for the observed mixing of cross helicities with increasing heliocentric distance in the solar wind.

Oughton, S.↗
NASA NTRS1978

Procedure for developing experimental designs for accelerated tests for service-life prediction

Recommended design procedures to reduce the complete factorial design by retaining information on anticipated important interaction effects, and by generally giving up information on unconditional main effects are discussed. A hypothetical photovoltaic module used in the test design is presented. Judgments were made of the relative importance of various environmental stresses such as UV radiation, abrasion, chemical attack, temperature, mechanical stress, relative humidity and voltage. Consideration is given to a complete factorial design and its graphical representation, elimination of selected test conditions, examination and improvement of an engineering design, and parametric study. The resulting design consists of a mix of conditional main effects and conditional interactions and represents a compromise between engineering and statistical requirements.

Thomas, R. E.↗
NASA NTRS2004

Measurements of Infrared and Acoustic Source Distributions in Jet Plumes

The aim of this investigation was to use the linear phased array (LPA) microphones and infrared (IR) imaging to study the effects of advanced nozzle-mixing techniques on jet noise reduction. Several full-scale engine nozzles were tested at varying power cycles with the linear phased array setup parallel to the jet axis. The array consisted of 16 sparsely distributed microphones. The phased array microphone measurements were taken at a distance of 51.0 ft (15.5 m) from the jet axis, and the results were used to obtain relative overall sound pressure levels from one nozzle design to the other. The IR imaging system was used to acquire real-time dynamic thermal patterns of the exhaust jet from the nozzles tested. The IR camera measured the IR radiation from the nozzle exit to a distance of six fan diameters (X/D(sub FAN) = 6), along the jet plume axis. The images confirmed the expected jet plume mixing intensity, and the phased array results showed the differences in sound pressure level with respect to nozzle configurations. The results show the effects of changes in configurations to the exit nozzles on both the flows mixing patterns and radiant energy dissipation patterns. By comparing the results from these two measurements, a relationship between noise reduction and core/bypass flow mixing is demonstrated.

Agboola, Femi A.↗
NASA NTRS1985

High atmospheric NO(x) levels and multiple photochemical steady states

The rate of removal of atmospheric NO(x) compounds at different NO(x) levels is estimated using a one-dimensional photochemical model. NO(x) removal by wet deposition, surface deposition, and thermochemical processes is examined. NO(x) removal rates at different surface NO mixing ratios are calculated and the data are analyzed. It is revealed that at low NO(x) levels NO(x) is photochemically converted to HNO3 by either wet or dry deposition; however, at high NO(x) levels formation of HNO3 is inhibited due to the disappearance of tropospheric ozone and OH, and the NO(x) is removed by rainout of N2O4 and N2O5, surface deposition of NO and NO2, and direct dissolution of NO and NO2 in rainwater. The effects of NO(x) mixing ratios greater than 10 to the -7th on the ozone and climate are investigated.

Kasting, J. F.↗
NASA NTRS1975

Source self-mixing in the detection of extended incoherent sources

We consider the self-beating of incoherent light from an extended source at a wideband photomixer. The intermediate frequency mean squared current is found to be proportional to the product of the direct detected source power and the power within the IF bandpass about the optical frequency and within the heterodyne field of view. Thus the ratio of the heterodyne signal to self-beating power is proportional to the ratio of local oscillator power to direct detected power. This ratio is usually large for systems employing efficient local oscillators that generate shot-noise-limited operation. In less efficient systems, such as those employing tunable diode lasers, the effects of self-mixing may be significant.

Cohen, S. C.↗
NASA NTRS2006

Modeling and Full-Scale Testing of an Aspirating Face Seal

A 36" diameter aspirating face seal for aircraft engine application has undergone extensive testing and analysis. Previous testing indicated that the seal tended to seek equilibrium at axial rotor clearances that were larger than expected. Parameter studies were conducted on several seal design parameters to evaluate effect on seal performance. Mixing of air flows from the air dam and air bearing regions of the seal was shown to have a significant impact on the seal's performance. Two methods of minimizing this flow interaction were studied both analytically and experimentally. The first method is to reduce the labyrinth tooth clearance, thereby limiting flow to the air dam itself. The second method involves utilizing a flow deflector between the air dam and air bearing regions of the seal in order to prevent radial flow from the air dam from disrupting the formation of a hydrostatic film at the air bearing. Both methods were shown to be effective design enhancements, allowing seal closure to be achieved. In both cases, the seal seeks an equilibrium position 0.0015" from the rotor surface, with corresponding low leakage rates.

Turnquist, Norman A.↗
NASA NTRS1972

Space shuttle booster multi-engine base flow analysis

A comprehensive review of currently available techniques pertinent to several prominent aspects of the base thermal problem of the space shuttle booster is given along with a brief review of experimental results. A tractable engineering analysis, capable of predicting the power-on base pressure, base heating, and other base thermal environmental conditions, such as base gas temperature, is presented and used for an analysis of various space shuttle booster configurations. The analysis consists of a rational combination of theoretical treatments of the prominent flow interaction phenomena in the base region. These theories consider jet mixing, plume flow, axisymmetric flow effects, base injection, recirculating flow dynamics, and various modes of heat transfer. Such effects as initial boundary layer expansion at the nozzle lip, reattachment, recompression, choked vent flow, and nonisoenergetic mixing processes are included in the analysis. A unified method was developed and programmed to numerically obtain compatible solutions for the various flow field components in both flight and ground test conditions. Preliminary prediction for a 12-engine space shuttle booster base thermal environment was obtained for a typical trajectory history. Theoretical predictions were also obtained for some clustered-engine experimental conditions. Results indicate good agreement between the data and theoretical predicitons.

Tang, H. H.↗
NASA NTRS1985

Buoyancy Effects upon Vapor Flame and Explosion Processes

The objective of this microgravity project is to develop an experimental and theoretical analyses critical to the understanding of the coupling of buoyancy and turbulence generation and its effect on fuel-air mixing, flame intensity and flame propagation in jet diffusion flames. The experiment is designed to examine certain effects of buoyancy acting on a diffusion flame in which the flame is directed either upward or downward. This change from negative to positive g is observed to significantly alter the flame shape although all other operating conditions are the same for both configurations. However, to perform this experiment a significant coaxial secondary air flow is needed in order to prevent flow reversal when the flame is inverted. The theoretical analysis that has been developed handles the secondary air flow and the extreme change in gravity vector direction. Thus the data will provide a measure of credibility of the analysis which will then be used to assist in the design of the actual zero-g experiment.

Edelman, R. B.↗
NASA NTRS1994

Air pollutant transport in a coastal environment. Part 1: Two-dimensional simulations of sea-breeze and mountain effects

Over the southern California coastal region, observations of the vertical distributions of pollutants show that maximum concentrations can occur within temperature inversion layers well above the surface. A mesoscale model is used to study the dynamical phenomena that cause such layers, including sea breezes and mountain flows, and to study the characteristics of air pollutant transport in a coastal environment capped by a temperature inversion. The mathematical and physical structure of the model is described. Two-dimensional simulations corresponding to four configurations of coastal plains and mountains are discussed. The simulations reveal that pollutant transport over a coastal plain is strongly influenced by the topographic configuration, including the height of coastal mountains and their distance from the coastline. Sea breezes induced by land-sea thermal contrasts, as well as upslope winds induced along mountain flanks, both create vertical transport that can lead to the formation of elevated pollution layers. The sea-breeze circulation generates pollution layers by undercutting the mixed layer and lofting pollutants into the stable layer. Heating of mountain slopes acts to vent pollutants above the mountain ridge during the day; during the evening, pollutants can be injected directly into the inversion layer from the decaying upslope flows. In a land-sea configuration with mountains close to the coastline, the sea breeze and heated-mountain flow are strongly coupled. In the afternoon, this interaction can produce upslope flow from which polluted air is detrained into the inversion layer as a return circulation. When the mountains lie farther inland, however, pollutants may be trapped aloft when the mixed layer stabilizes in the late afternoon. As the nocturnal boundary layer forms over the coast in the evening, polluted mixed-layer air is effectively left behind in the inversion layer. In the Los Angeles Basin, the formation mechanism for elevated polluted layers is most similar to our cases with inland mountains.

Lu, Rong↗
NASA NTRS1993

Mixing and transient interface condensation of a liquid hydrogen tank

Experiments were conducted to investigate the effect of axial jet-induced mixing on the pressure reduction of a thermally stratified liquid hydrogen tank. The tank was nearly cylindrical, having a volume of about 0.144 cu m with 0.559 m in diameter and 0.711 m long. A mixer/pump unit, which had a jet nozzle outlet of 0.0221 m in diameter was located 0.178 m from the tank bottom and was installed inside the tank to generate the axial jet mixing and tank fluid circulation. The liquid fill and jet flow rate ranged from 42 to 85 percent (by volume) and 0.409 to 2.43 cu m/hr, respectively. Mixing tests began with the tank pressure ranging from 187.5 to 238.5 kPa at which the thermal stratification results in 4.9 to 6.2 K liquid sub cooling. The mixing time and transient vapor condensation rate at the liquid-vapor interface are determined. Two mixing time correlations, based on the thermal equilibrium and pressure equilibrium, are developed. Both mixing time correlations are expressed as functions of system and buoyancy parameters and compared well with other experimental data. The steady state condensation rate correlation of Sonin et al. based on steam-water data is modified and expressed as a function of jet subcooling. The limited liquid hydrogen data of the present study shows that the modified steady state condensation rate correlation may be used to predict the transient condensation rate in a mixing process if the instantaneous values of jet sub cooling and turbulence intensity at the interface are employed.

Lin, C. S.↗