Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “maturation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Kinetic and equilibrium reactions on natural and laboratory generation of thermogenic gases from Type II marine shale

The phenomenon that laboratory pyrolysis experiments produce much wetter gases than those in natural reservoirs is a long-recognized and debated problem in the investigation of natural gases in sedimentary basins. In this study, we explore the discrepancy by pyrolyzing a type II kerogen from the Woodford Shale in Oklahoma, compared with the previous results on the produced natural gases from the Arkoma Basin generated from the same source rock (Liu et al., 2019) with the discussion of gas and isotopic compositions at bulk and position-specific (PS) levels. An improved GC-pyrolysis-GC IRMS method is applied for the determination of PS δ 13 C of propane produced in the pyrolysis of the Woodford Shale at Easy %R o from 0.76 to 3.27. Kinetic and thermodynamic considerations of the chemical and isotopic compositions of the natural and laboratory pyrolysis gases suggest that the generation of light hydrocarbons involves uni-directional cracking reactions, exchange reactions with water, and likely reversible reactions among light hydrocarbons and other H-containing volatiles. After the gas generation in the unconventional Woodford Shale reservoirs, the C 1 -C 4 gases might have approached close to chemical equilibrium of C 1 -C 3 and isotope equilibrium of C 2 -C 1 and C 3 -C 1 pairs at their peak temperatures. The capping H for the generation of C 1 -C 4 in the Woodford Shale gases appears to have experienced at least partial exchange with the water, while that in the pyrolysis gases is only originated from organic-bound compounds with large kinetic isotope effects (KIE). Our findings indicate that elevated compound-specific and PS δ 13 C values of propane in the wet-gas cracking stage are significantly influenced by the breakdown of the thermally stable compounds (e.g., remaining kerogen, residues). A first synthesis of PS δ 13 C and δ 2 H isotopic compositions of propane from this study and the literature data suggests relatively similar isotopic structures of propane precursors in kerogens. Finally, this study demonstrates that PS isotope analysis of propane can contribute to identifying various geological (e.g., maturation, wet-gas cracking, H exchange, diffusion) and biodegradation processes.

58 GEOSCIENCES↗
DOE OSTI2025

Stable isotope equilibria in the dihydrogen-water-methane-ethane-propane system. Part 2: Experimental determination of hydrogen isotopic equilibrium for ethane-H2 from 30 to 200 °C and propane-H2 from 75 to 200 °C

The stable isotopic compositions of light n-alkanes, including methane, ethane, and propane, are often used to identify the sources and thermal maturity of natural gas samples. Though stable isotopic compositions of these molecules are commonly assumed to be controlled by kinetic isotope effects, recent studies have proposed both carbon and hydrogen isotopic equilibrium may also occur in some samples. Assessing whether samples are in isotopic equilibrium requires knowledge of light alkane equilibrium fractionation factors over geologically relevant temperatures for formation and storage (up to ∼300 °C). In this study, we report experimental results of hydrogen isotopic equilibrium between ethane and H2 from 30 to 200 °C and propane and H2 from 75 to 200 °C. We compare these results with high-level theoretical calculations and provide a preferred polynomial fit to describe equilibrium fractionation factors. Comparison of these fractionation factors with a compilation of ∼500 compiled environmental gas samples supports the proposal that many (∼50%) of these natural gas samples exhibit hydrogen isotopic compositions consistent with having formed in or attained methane-ethane-propane hydrogen isotopic equilibrium over geologically relevant temperatures for formation and storage (50–300 °C).

Turner, Andrew C↗
DOE OSTI2026

Mitigating the soil carbon deficit of annual agriculture with perennial bioenergy crops in the U.S. Midwest

Maize ( Zea mays L.) is the dominant bioenergy feedstock in the US Midwest but its cultivation since the early 1800s has incurred substantial losses in soil organic carbon (SOC). We quantified differences in SOC stocks under perennial bioenergy crops of Panicum virgatum L. (switchgrass) and Miscanthus x giganteus Greef et Deuter (miscanthus) planted on former maize and soybean fields relative to maize-based annual cropping and native prairie. Comparisons were made at seven locations across Illinois, USA, spanning a range of climate and soil types. Across sites, SOC stocks to 1-m depth on an equivalent soil mass basis were 146 Mg C ha −1 under prairie, 107 Mg C ha −1 under miscanthus, 97.9 Mg C ha −1 under switchgrass, and 87.7 Mg C ha −1 under maize. Higher SOC demonstrates the potential of perennial bioenergy crops to rebuild the SOC deficit accrued under nearly two centuries of maize-based annual cropping. SOC stock increased in the first 5 years under mature bioenergy crops at four out of seven sites. Carbon isotope (δ 13 C) analyses of surface depths confirmed short-term increases in SOC to be derived from miscanthus and switchgrass. Stocks of SOC could be increased over time under miscanthus or switchgrass cultivation even with annual harvesting, though our measured rates of SOC accumulation were lower than previous estimates for Illinois and varied by site.

bioenergy↗
DOE OSTI2026

The role of source geometry and atmospheric propagation in global bolide infrasound detectability

Global infrasound monitoring provides a persistent means of detecting energetic bolide atmospheric entries, complementing optical observations and extending coverage over remote regions. We present a global assessment of the physical factors governing bolide infrasound detectability by correlating 623 bolide events reported by the Center for Near-Earth Object Studies between 2007 and 2025 with waveform data from the International Monitoring System. We identify 311 events with confirmed infrasound detections, corresponding to a detection rate of approximately 50%, substantially higher than inferred from earlier surveys, reflecting both the maturation of the global infrasound network and advances in automated, multi-frequency array processing. Analysis of flight parameters shows that infrasound detectability is selective rather than uniform across the bolide population. Detected events are preferentially associated with steeper entry angles and lower-altitude energy deposition, while shallow, high-altitude trajectories are less consistently observed. Very high-energy events remain detectable regardless of geometry, but for the more common lower-energy regime, observability depends on specific combinations of entry parameters and propagation conditions. This geometric dependence persists across comparable energy ranges and atmospheric conditions, indicating that entry angle exerts a primary control on detectability, with energy and propagation acting as secondary modulating factors. Furthermore, these results provide new physical constraints on bolide-atmosphere interactions and improve interpretation of global infrasound observations for planetary defense and atmospheric-entry studies.

Bolides↗
DOE OSTI2021

Joint impedance and facies inversion of time-lapse seismic data for improving monitoring of CO 2 incidentally stored from CO 2 EOR

Time-lapse seismic monitoring is an effective and proven technology for mapping the distribution of CO 2 in a subsurface reservoir. When injected CO 2 displaces other reservoir fluids, porous-medium properties are changed and thus the seismic impedance changes, causing time-lapse seismic amplitude differences in the injection zones. The analysis and interpretation of images created from these amplitude differences can provide information about reservoir architecture and the CO 2 migration within the reservoir. Incorporating seismic inversion and rock physics into the interpretation of time-lapse seismic data can considerably improve the modeling and monitoring to detect and assess the location of CO 2 over time. The joint inversion method presented in this paper has an integral representation of the geology in the inversion algorithm using elastic facies, which provides information about the spatial distribution of the geologic heterogeneities controlling the movement of fluids in the reservoir. The method was successfully applied to time-lapse seismic data from a mature oil field undergoing CO 2 enhanced oil recovery. The estimated seismic acoustic impedances and facies reflect the characteristics of individual geologic facies and fluid conditions of the reservoir subject to CO 2 injection. Finally, the probabilities estimated by the joint impedance and facies inversion for the reservoir's litho-fluid facies can be used for forecasting CO 2 saturation and pressure changes within the target reservoir.

4D seismic↗
DOE OSTI2023

Measured CO 2 sorption isotherms with 25 Bakken Petroleum System rock samples from the Lower and Upper Shales, Middle Bakken, and Three Forks formations

Isotherms were measured with 25 Bakken Petroleum System (BPS) rock samples using a magnetic suspension balance at reservoir conditions of 110 °C and pressures up to 345 bar. Samples from four wells represented the Middle Bakken (MB) and Three Forks (TF) production zones, and the Upper Bakken Shale (UBS) and Lower Bakken Shale (LBS) source shales. UBS and LBS CO 2 sorption capacities at 345 bar averaged 12–14 g/kg rock compared to 1.3 to 2.5 g/kg rock for MB and TF. Increasing pressure from 150 to 345 bar resulted in only small increases in CO 2 sorption for all lithofacies. For the UBS and LBS source shales, the higher average total organic carbon (TOC) values (14.7 and 11.4 wt.%) and clay values (25 and 28 wt.%) corresponded to their higher CO 2 sorption values while for the MB and TF samples, lower TOCs (0.3 and 0.5 wt.%) and clay values (8.2 and 18.2 wt.%) corresponded to lower CO 2 sorption values. Here, when all 25 samples (from all lithofacies) were evaluated as a group, sorption capacities were highly correlated with TOC (Spearman's rho values +0.84 to +0.85), with rock density (rho values -0.75 to -0.76), and clay content (rho values +0.66). However, correlations with porosity and thermal maturity (Tmax) were weak. Measured sorption capacities and rock porosities showed that sorption accounted for about 10-times as much CO 2 storage as the available pore space for the UBS and LBS lithofacies. In contrast, the pore space dominated the storage resource of the TF and MB lithofacies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Containment strategy for subsurface H 2 storage based on time-dependent soft solids

Here, we propose an innovative containment strategy based on time-dependent soft solids, namely 2 wt% Laponite suspensions, to reinforce natural subsurface seals and engineer flow barriers, with an eye toward making H 2 subsurface storage scalable and geographically agnostic. This suspension can be injected at its initial low viscosity and elasticity into a porous medium, allowing for easy pumping and targeted delivery. Once inside the target zone, it matures into a soft solid with much higher viscosity and elasticity, acting as a potential flow barrier. We discuss the rheological properties of the suspensions and demonstrate that hydrogen does not adversely affect their microstructure, but rather increases the suspensions’ viscosity and elasticity. Moreover, the suspensions enhance the rock samples’ compressive strength, while hydrogen exposure increases their stiffness and ductility. The ability of rock samples saturated with the suspensions to contain higher injected gas pressures is enhanced by aging at higher temperatures.

08 HYDROGEN↗
DOE OSTI2025

Cost analysis of alternative large-scale high-temperature solid oxide electrolysis hydrogen production facilities

We extend our past cost analysis of gigawatt-scale solid oxide electrolysis (SOE) facilities that produce high purity hydrogen gas from water by estimating construction and operating costs for three new alternative design cases: (1) offsite feed steam generation; (2) near-atmospheric pressure (NAP) stack; and (3) onsite electric boiler feed steam generation. Pressure effects on hydrogen electrode-(cathode-)supported SOE cell (SOEC) stack performance are estimated for the same assumed cell and stack construction and used to determine facility-wide stack capital costs for achieving a fixed H2 production at different pressures. Modular balance of plant (BOP) process equipment capital costs are estimated for each new alternative design case using our past equipment sizing, design, and cost data and scaling relationships. Furthermore, we update BOP equipment sizing and design for the NAP case using Aspen®. Vendor quotes for electric boilers are used to estimate costs for the electric boiler design case. Factory and onsite assembly and installation costs for SOEC stacks and BOP equipment are calculated using our past simplified first-principles approach. First-of-a-kind (FOAK) and N th -of-a-kind (NOAK) production maturity cost estimates are included for all results. The case with NAP stacks offers the lowest facility total capital cost (TCC, ~23% lower than base) while use of small electric boilers requires the highest TCC (~3% higher than base). H 2 production prices decrease from the base of ~$\$2.17$ /kgH 2 to ~$\$1.92$/kgH 2 for 1 GW e DC SIP facilities utilizing NAP stacks supplied by offsites steam situated in large modules and blocks for $\$0.030$/kWh e and $0.009/kWh t prices for electricity and thermal energy, respectively. We report all costs in 2021 US dollars.

Balance of plant (BOP) process equipment↗
DOE OSTI2026

Hydrogen production from full-strength corn stover fermentation effluent in single-chamber replaceable-cathode microbial electrolysis cells

Lignocellulosic residual biomass generated by the agricultural sector is an abundant feedstock for biohydrogen production via dark fermentation. However, this process is intrinsically inefficient, converting only ~30% of the reductant energy into H2 and leaving substantial amounts of reduced byproducts. These byproducts, mostly found in the fermentation effluents, can be further valorized in microbial electrolysis cells (MECs) to enhance the overall H2 recovery. However, current MEC configurations are typically dual- or single-chamber systems, yet both suffer from key inefficiencies. Dual-chamber systems rely on proton exchange membranes that are costly and prone to rapid biofouling, whereas single-chamber, membraneless systems are limited by reduced productivity due to H2 recycling and methanogenic consumption In this study, three single-chamber, 50-mL replaceable-cathode microbial electrolysis cells (RC-MECs) were 3D-printed and equipped with a physical separator to isolate anode and cathode compartments and limit H2 migration. Full-strength milled corn stover (MCS) fermentation effluent (COD of ~23.8 g-COD/L) was treated in fed-batch mode over two operational periods spanning 21 (Run 1) and 80 (Run 2) days. The RC-MECs exhibited comparable performance in both runs: after biofilm maturation, current densities exceeded 100 A/m²_cathode, COD removal reached up to 43%. Notably, extended RC-MECs operation led to a substantial methanogenic activity with the CH4 fraction in the cathode gas increasing to as high as 80% of the total biogas. Additions of a methanogenesis inhibitor 2-bromoethanesulfonate (2-BES) produced transient increases in hydrogen yields (11.51 and 5.12 L-H2/L_reactor/day in Runs 1 and 2, respectively); however, sustained 2-BES addition in subsequent cycles reduced total biogas production, decreased COD removal, and led to volatile fatty acid accumulation. Overall, single-chamber MECs can treat high-strength dark fermentation effluents while improving H2 recovery, but methanogenesis remains a key bottleneck, and complete long-term inhibition may be operationally unsustainable.

Hydrogen Production↗
DOE OSTI2020

Deep learning interfacial momentum closures in coarse-mesh CFD two-phase flow simulation using validation data

Multiphase flow phenomena have been widely observed in the industrial applications while it remains a challenging yet unsolved problems. Three-dimensional computational fluid dynamics (CFD) approaches resolve the flow fields on a finer special and temporal scales which can complement the dedicated experimental study. However, closures have to be introduced to reflect the underlying physics in multiphase flow. Among them, the interfacial forces, including drag, lift, turbulent dispersion and wall lubrication forces, play in important role on the bubble’s distribution and migration in liquid-vapor two-phase flow. Development of those closures traditionally rely on the experimental data and analytical derivation with simplified assumptions which usually cannot deliver a universal solution across wide range of flow conditions. In this paper, a data-driven approach, named as Feature Similarity Measurement (FSM), is developed and applied to improve the simulation capability of two-phase flow with coarse-mesh CFD approach. Interfacial momentum transfer in adiabatic bubbly flow serves as the focus of the present study. Both a mature and a simplified set of interfacial closures are taken as the low fidelity data. Experimental data and fine mesh CFD simulations results are adopted as high-fidelity data. Qualitative and quantitative analysis are performed in this paper which reveals that FSM can substantially improve the prediction of coarse mesh CFD model regardless of the choice of interfacial closures and it provides scalability and consistency across discontinuous flow regimes. Furthermore, it demonstrates that data-driven method can aid the multiphase flow modeling by exploring the connections between local physical features and simulation errors.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

An integrated data management and informatics framework for continuous drug product manufacturing processes: A case study on two pilot plants

The pharmaceutical industry continuously looks for ways to improve its development and manufacturing efficiency. In recent years, such efforts have been driven by the transition from batch to continuous manufacturing and digitalization in process development. To facilitate this transition, integrated data management and informatics tools need to be developed and implemented within the framework of Industry 4.0 technology. Here, in this regard, the work aims to guide the data integration development of continuous pharmaceutical manufacturing processes under the Industry 4.0 framework, improving digital maturity and enabling the development of digital twins. This paper demonstrates two instances where a data integration framework has been successfully employed in academic continuous pharmaceutical manufacturing pilot plants. Details of the integration structure and information flows are comprehensively showcased. Approaches to mitigate concerns in incorporating complex data streams, including integrating multiple process analytical technology tools and legacy equipment, connecting cloud data and simulation models, and safeguarding cyber-physical security, are discussed. Critical challenges and opportunities for practical considerations are highlighted.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Creep anisotropy modeling and uncertainty quantification of an additively manufactured Ni-based superalloy

The advantages offered by additive manufacturing over traditional processes has driven a great deal of industrial and academic interest in recent years. However, the process is relatively new and requires additional investigation to become sufficiently mature for wide scale industrial adoption. Electron beam melting powder bed fusion is one technology that has shown promise for fabricating high temperature resistant materials such as nickel based superalloys. The resulting microstructures typically exhibit a strong fiber texture in the build direction giving rise to anisotropic time-dependent deformation behavior. In order to accelerate the qualification of these materials for industrial adoption accurate numerical models are needed for simulating their behavior. In this work a crystal plasticity model including non-Schmid effects is presented for capturing creep anisotropy observed in additively manufactured IN738LC. The model is calibrated via a probabilistic framework where model parameters are treated as random variables. An iterative sequential design strategy is utilized to efficiently identify the probability density of the unknown model parameters. As a case study the model is utilized to investigate the behavior of randomly oriented equiaxed grain clusters sometimes observed embedded in the additively manufactured columnar structure. A synthetic realization is simulated and uncertainty is propagated through to the full-field response. Results indicate that these features are the source of significant creep relaxation and strain accumulation which partially explains observed grain boundary decohesion at these locations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Influence of cementation on the yield surface of rocks numerically determined from digital microstructures

Digital Rock Physics has reached a level of maturity on the characterisation of primary properties that depend on the microstructure – such as porosity, permeability or elastic moduli – by numerically solving field equations on μCT scan images of rock. After small deformations or at depth though, most rocks eventually reach their limit of elasticity and the complementary plastic properties are needed to describe the full mechanical behaviour. Currently, determination of a rock’s yield surface from its microstructure is often restricted to semi-analytical criteria derived by limit analysis or numerical simulations performed on idealised geometries. Such simplification lacks representativeness, particularly for processes that affect directly the pore-grain interface such as the cementation phenomenon, happening during diagenesis. Eventually, only direct numerical simulation of elasto-plasticity performed on digitalised microstructures can be used to assess the strength of different cemented materials and its evolution with the alteration of the microstructure. In this study, we provide a comprehensive parametric study on the impact of cementation on rock strength for real microstructures of cemented granular materials. Compared to most previous studies, the whole yield surface is determined numerically (using Finite Element Method) in order to assess the influence of cementation for different stress-paths. The previously known tendency of rock to strengthen with increasing cementation volume is verified. New results on the influence of cement property namely Young’s modulus, friction and cohesion on the rock’s yield surface are explored. The envelopes obtained are compared to the ones obtained by experimental data and existing models. Finally, the framework presented in this study showcases the wider possibility of determining any rock’s or porous material’s yield surface from its microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Long-Term Outcomes of Radical Radiation Therapy with Hypoxia Modification with Biomarker Discovery for Stratification: 10-Year Update of the BCON (Bladder Carbogen Nicotinamide) Phase 3 Randomized Trial (ISRCTN45938399)

Many muscle-invasive bladder cancers are hypoxic, which limits the efficacy of radiation therapy. Hypoxia modification using carbogen and nicotinamide has been tested in a phase 3 trial, Bladder Carbogen Nicotinamide. We present mature follow-up data with biomarker predictions of outcomes.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2021

Profiling B cell immunodominance after SARS-CoV-2infection reveals antibody evolution to non-neutralizing viral targets

Dissecting the evolution of memory B cells (MBCs) against SARS-CoV-2 is critical for understanding antibody recall upon secondary exposure. Here, we used single-cell sequencing to profile SARS-CoV-2-reactive B cells in 38 COVID-19 patients. Using oligo-tagged antigen baits, we isolated B cells specific to the SARS-CoV-2 spike, nucleoprotein (NP), open reading frame 8 (ORF8), and endemic human coronavirus (HCoV) spike proteins. SARS-CoV-2 spike-specific cells were enriched in the memory compartment of acutely infected and convalescent patients several months post symptom onset. With severe acute infection, substantial populations of endemic HCoV-reactive antibody-secreting cells were identified and possessed highly mutated variable genes, signifying preexisting immunity. Finally, MBCs exhibited pronounced maturation to NP and ORF8 over time, especially in older patients. Monoclonal antibodies against these targets were non-neutralizing and non-protective in vivo. These findings reveal antibody adaptation to non-neutralizing intracellular antigens during infection, emphasizing the importance of vaccination for inducing neutralizing spike-specific MBCs.

antibody↗
DOE OSTI2022

Forecasting distributed energy resources adoption for power systems

Failing to incorporate accurate distributed energy resource penetration forecasts into long-term resource and transmission planning can lead to cost inefficiencies at best and system failures at worst. We have developed an open-source tool that employs an advanced Bass specification to calibrate and forecast technology adoption. The advanced specification includes geographic clustering, exogenously estimated market size, and dynamic time steps. Training on historical adoption of rooftop photovoltaics at the U.S. county-level and using detailed techno-economic estimates, our model achieves a two-year average mean-absolute-percentage-error of 19% in predicting system counts at the county-level, weighted by population. Model error was negatively correlated with market maturity - the error was 12% for counties in states with at least 28 W-per-capita of installed capacity. The advanced specification significantly reduces unweighted forecasting percent error compared to a conventional Bass specification: from 196% to 25% for capacity and from 226% to 22% for system count.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Monitoring leaf phenology in moist tropical forests by applying a superpixel-based deep learning method to time-series images of tree canopies

Tropical leaf phenology-particularly its variability at the tree-crown scale-dominates the seasonality of carbon and water fluxes. However, given enormous species diversity, accurate means of monitoring leaf phenology in tropical forests is still lacking. Time series of the Green Chromatic Coordinate (GCC) metric derived from tower-based red-green-blue (RGB) phenocams have been widely used to monitor leaf phenology in temperate forests, but its application in the tropics remains problematic. To improve monitoring of tropical phenology, we explored the use of a deep learning model (i.e. superpixel-based Residual Networks 50, SP-ResNet50) to automatically differentiate leaves from non-leaves in phenocam images and to derive leaf fraction at the tree-crown scale. To evaluate our model, we used a year of data from six phenocams in two contrasting forests in Panama. Here, we first built a comprehensive library of leaf and non-leaf pixels across various acquisition times, exposure conditions and specific phenocams. We then divided this library into training and testing components. We evaluated the model at three levels: 1) superpixel level with a testing set, 2) crown level by comparing the model-derived leaf fractions with those derived using image-specific supervised classification, and 3) temporally using all daily images to assess the diurnal stability of the model-derived leaf fraction. Finally, we compared the model-derived leaf fraction phenology with leaf phenology derived from GCC. Our results show that: 1) the SP-ResNet50 model accurately differentiates leaves from non-leaves (overall accuracy of 93%) and is robust across all three levels of evaluations; 2) the model accurately quantifies leaf fraction phenology across tree-crowns and forest ecosystems; and 3) the combined use of leaf fraction and GCC helps infer the timing of leaf emergence, maturation and senescence, critical information for modeling photosynthetic seasonality of tropical forests. Collectively, this study offers an improved means for automated tropical phenology monitoring using phenocams.

54 ENVIRONMENTAL SCIENCES↗