Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “low-frequency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Space and Time Variations and Turbopause Dynamical Structure

Time spectra of the critical frequency f sub o E sub s and blanketing frequency f sub b E sub s for the records of a spaced chain of ionosphere vertical sounding stations were studied by means of a maximum entropy method, while coherence spectra were analyzed with the Blackman and Tukey method. It was found out that the frequency parameters spectrum of E sub s within the range of 1-10 cycles/h are discrete with one or two maxima. The first, a low frequency maximum with T=40 min, is of larger amplitude, stable and exists permanently; the second one with T = 10 min is less stable, occurs irregularly and more often within f sub o E sub s. Further, the first maximum corresponds to a higher level of coherence which decreases as the distance to the stations increases. It is concluded that the low-frequency maximum is induced by cellular eddies, usually interpreted as wind shears with horizontal dimensions of not more than 300 km. Irregularity, small amplitude, and low coherence in the range of the second maximum are indicative of the fact that turbulence must be its only source.

Ovezgeldiyev, O. G.↗

Relationship between the IMF magnitude and Pc 3 magnetic pulsations in the magnetosphere

The relationships between the IMF magnitude and pulsation frequencies in the Pc 3-4 range simultaneously observed both at synchronous orbit and at low latitudes on the ground are statistically described. A theoretical discussion is given on how these observations can be interpreted in terms of the characteristic frequency of compressional Pc 3-4 magnetic pulsations in the magnetosphere, based on the well-established ion cyclotron resonance mechanism between magnetosonic mode of low-frequency upstream waves and narrowly reflected ion beams in the earth's foreshock.

Yumoto, K.↗

Perturbations of subionospheric LF and MF signals due to whistler-induced electron precipitation bursts

Increasing attention is now being devoted to the problem of the pitch angle scattering and resulting precipitation of magnetospheric energetic electrons by coherent waves. The present investigation has the objective to report the first evidence of a correlation between whistlers and amplitude perturbations on low-frequency (LF) signals at 37.2 kHz and medium-frequency (MF) signals at 780 kHz. Whistler-correlated amplitude perturbations were observed on a 780-kHz MF signal propagating on an approximately 1800 km path from South America to Palmer. The observed MF perturbations were of order 50 percent in amplitude and developed much more quickly than other changes of comparable magnitude on the signal.

Carpenter, D. L.↗

Spatial variation of sea surface temperature and flux-related parameters measured from aircraft in the JASIN experiment

Spatial variation of some parameters measured on two aircraft flying 100-km box and 200-km triangular patterns at low levels in the atmospheric boundary layer during the Joint Air Sea Interaction Experiment in the North Atlantic was studied. The variation should be representative of summer conditions in mid-latitude oceans. The variance density of remotely sensed sea surface temperature, corrected for sky reflection, is found to depend on the one-dimensional wave number raised to the power of approximately -5/3. Nonuniform clouds add low-frequency variance to observations of a downward looking radiometer and result in steeper slope of the spectra of uncorrected sea surface temperature. Turbulent fluxes of momentum, sensible heat, and moisture were determined with the bulk formulae from the parameters (wind speed, temperature, specific humidity, and sea surface temperature) measured from the aircraft. The averages of these fluxes over each flight leg were compared with the fluxes determined from the parameters averaged over the same leg. The difference is negligible, showing that spatially averaged observations, such as those from spaceborne sensors, can be used in the bulk formulae to evaluate the fluxes.

Liu, W. T.↗

Magnetospheric energization by interaction between planetary spin and the solar wind

If the solar wind is capable of driving magnetospheric convection, then solar-wind flow past any spinning, magnetized planet with a conducting ionosphere must cause the magnetic field lines in the outer part of its magnetospheric tail to be twisted into a helix. Such a magnetic field configuration requires magnetically field-aligned (Birkeland) currents in the tail that flow in and near the magnetopause and close by driving Pedersen currents through the planetary ionosphere. The strength of the Birkeland currents (and, by current continuity, the Pedersen currents) is, to first order, independent of the angle between the planetary-spin vector and the solar-wind velocity vector. Rather, the total current is a function of the magnetic moment of the planet, the radius of the tail, the angular velocity of planetary spin, the conductivity of the ionosphere, and the solar wind speed. For Jupiter, Saturn, Uranus, and perhaps Neptune, the power these currents deliver to the ionosphere is significant with regard to magnetospheric dynamics, such as the production of aurora and the generation of low-frequency radio emissions. For Mercury, Venus, earth, Mars, and probably Pluto, these currents are relatively small, although observable effects may be marginally detectable for the case of the earth's magnetosphere.

Isbell, J.↗

60-GHz integrated-circuit high data rate quadriphase shift keying exciter and modulator

An integrated-circuit quadriphase shift keying (QPSK) exciter and modulator have demonstrated excellent performance directly modulating a carrier frequency of 60 GHz with an output phase error of less than 3 degrees and maximum amplitude error of 0.5 dB. The circuit consists of a 60-GHz Gunn VCO phase-locked to a low-frequency reference source, a 4th subharmonic mixer, and a QPSK modlator packaged into a small volume of 1.8 x 2.5 x 0.35 in. The use of microstrip has the advantages of small size, light-weight, and low-cost fabrication. The unit has the potential for multigigabit data rate applications.

Grote, A.↗

A simple model for the formation of 'reflected', 'intermediate', and 'diffuse' ion distributions upstream of earth's bow shock

Detailed energetic ion and low-frequency wave experiments on ISEE 1, 2, and 3, have established correlations between the types of ion populations and waves observed to exist in the earth's foreshock region. The present calculation has the objective to quantitatively test the picture obtained for the earth's foreshock region. An analysis is conducted of the coupled spatial and temporal evolution of upstream protons and hydromagnetic waves by means of a simple model in which the protons are represented by counterstreaming beams which resonate with hydromagnetic waves, exciting the outward propagating modes and damping the inward propagating modes at a single wave number.

Lee, M. A.↗

Climate variability and atmospheric teleconnection from satellite observed cloud fluctuations

To investigate the low-frequency variability of the large-scale circulation over the tropics and its relationship with different regions of the globe, statistics of cloud fluctuations, as inferred from outgoing longwave radiation (OLR) are used. The data consists of seven years of global OLR in a 2.5 x 2.5-deg grid derived from NOAA polar orbiting satellite observations. The time series of area-averaged monthly deviation from the seven-year mean of OLR over an equatorial Central Pacific region is presented. It is shown that positive and negative deviations reflect local drier and wetter than normal conditions, respectively. Consideration is given to teleconnection based on the Central Pacific variations and to southern oscillation contributions.

Lau, K. M.↗

A new look at sound generation by blade/vortex interaction

As a preliminary attempt to understand the dynamics of blade/vortex interaction, the two-dimensional problem of a rectilinear vortex filament interacting with a Joukowski airfoil is analyzed in both the lifting and nonlifting cases. The vortex velocity components could be obtained analytically and integrated to determine the vortex trajectory. With this information, the aeroacoustic low-frequency Green's function approach could then be employed to calculate the sound produced during the encounter. The results indicate that the vortex path deviates considerably from simple convection due to the presence of the airfoil and that a reasonably sharp sound pulse is radiated during the interaction whose fundamental frequency is critically dependent upon whether the vortex passes above or below the airfoil. Determination of this gross parameter of the interaction is shown to be highly nonlinearly dependent upon airfoil circulation, vortex circulation, and initial position.

Hardin, J. C.↗

Intensity-dependent quasi-periodic oscillations in the X-ray flux of GX5 - 1

The X-ray flux of the bright galactic bulge source GX5 - 1 shows intensity-dependent quasi-periodic oscillations between 20 and 40 Hz, appearing as a broad peak in the power spectrum whose centroid frequency, width, and integrated excess power strongly depend on the source intensity. The strength and steepness of low-frequency noise present in the power spectra below 15 Hz also depend on the source intensity. No evidence is found for coherent X-ray pulsations between 0.5 and 2000 Hz. Possible mechanisms to explain these new phenomena are discussed.

Van Der Klis, M.↗

Influence of Melt Convection on Solid-Liquid Interface Under Terrestrial and Reduced Gravity Environments

Solidification and crystal growth processes involve thermal and solutal gradients within a molten phase. In the presence of gravity, such gradients result in convective flows which interact with diffusion fields at the solid-liquid interface. Dendritic growth kinetics was studied in transparent model systems which freeze similarily to most metals. Succinonitrile shows a strong influence of convection at supercoolings below about 1K. Fluid flows adjacent to solid-liquid interfaces and the behavior of shear flows in vertical annular geometries are studied. Novel low-frequency eigenstates were discovered and classified as coupled modes, for their involvement with interfacial deformation coupled to the fluid flow, and are unknown in systems without deformable interfaces. The dependence of coupled convection modes on interfacial geometry, gravity, fluid properties, and transformation characteristics studied for several annual flow arrangements with nominally pure solid-liquid systems.

Glicksman, M. E.↗

Improved fabrication techniques for infrared bolometers

Techniques are described for producing improved infrared bolometers from doped germanium. Ion implantation and sputter metalization have been used to make ohmic electrical contacts to Ge:Ga chips. This method results in a high yield of small monolithic bolometers with very little low-frequency noise. When one of these chips is used as the thermometric element of a composite bolometer, it must be bonded to a dielectric substrate. The thermal resistance of the conventional epoxy bond has been measured and found to be undesirably large. A procedure for soldering the chip to a metalized portion of the substrate is described which reduced this resistance. The contribution of the metal film absorber to the heat capacity of a composite bolometer has been measured. The heat capacity of a NiCr absorber at 1.3 K can dominate the bolometer performance. A Bi absorber has significantly lower heat capacity. A low temperature blackbody calibrator has been built to measure the optical responsivity of bolometers. A composite bolometer system with a throughput of approx. 0.1 sr sq cm was constructed using the new techniques. In negligible background it has an optical NEP of 3.6 10((exp -15) W/sq root of Hz at 1.0 K with a time constant of 20 ms. The noise in this bolometer is white above 2.5 Hz and is somewhat below the value predicted by thermodynamic equilibrium theory. It is in agreement with calculations based on a recent nonequilibrium theory.

Lange, A. E.↗

Transonic-flutter Investigation of Wings Attached to Two Low-acceleration Rocket-propelled Vehicles

Two low-acceleration transonic-flutter vehicles were launched and flown. The first carried two test wings, one of which fluttered at M = 0.92 at a frequency of 61.4 cycles per second. The reference flutter speed determined from two-dimensional theory for an unswept wing in incompressible flow is conservative when compared to the experimental flutter speed. The second vehicle carried two test wings, one of which failed at M = 0.71 because of low-frequency divergent oscillation. Since this failure was not caused by conventional flexure-torsion flutter, no comparison with a reference flutter speed can be made.

MISSILES, SPECIFIC TYPES↗

Balancing Vanguard Satellites

The Vanguard satellites and component parts were balanced within the specified limits by using a Gisholt Type-S balancer in combination with a portable International Research and Development vibration analyzer and filter, with low-frequency pickups. Equipment and procedures used for balancing are described; and the determination of residual imbalance is accomplished by two methods: calculation, and graphical interpretation. Between-the-bearings balancing is recommended for future balancing of payloads.

Simkovich, A.↗

Analysis of of Injection-Velocity Effects on Rocket Motor Dynamics and Stability

A concept of combustion time lag that includes dependency on injection velocity is introduced. The concept is used in the formulation of chamber transfer functions and in an analysis of low-frequency combustion instability. Theoretical frequency responses and stability boundaries are compared with those obtained when the injection-velocity effect on the time lag to be an important consideration, in the theory of chamber dynamics and combustion instability

Hurrell, Herbert G.↗

Near-Field and Far-Field Noise Measurements for a Blowdown-Wind-Tunnel Supersonic Exhaust Jet having about 475,000 Pounds of Thrust

Near-field and far-field noise surveys were made of the supersonic The exhaust jet of the Langley 9- by 6-foot thermal structures tunnel. The jet had a thrust rating of approximately 475,000 pounds. The sound power radiated was found to be about 3.6 x 10(exp 6) watts, and on an acoustical-mechanical efficiency basis this value is in reasonable agreement with data for smaller supersonic jets and for rocket engines of other investigations. Octave-band analyses of the near-field noise show that the maximum sound pressure levels in the low-frequency bands are greatest downstream, whereas maximum sound pressure levels in the high-frequency bands were greatest near the jet exit. A comparison of near-field noise measurements is made with data previously obtained for rocket engines. Noise survey measurements of the original jet are compared with similar data obtained after the addition of a 97-foot-long exit diffuser section, and an example of the application of this facility to the problem of acoustic environmental testing of a large space capsule is cited.

Mayes, William H.↗

Fermilab PIP II machine protection system digitized data noise elimination scheme and its FPGA implementation

In Fermilab's PIP-II machine protection system, beam loss signals from various detectors are digitized at 125 MS/s. Noise from both high-frequency sources and low-frequency 60 Hz AC power equipment can contaminate the data. To suppress noise across these ranges especially 60 Hz and its harmonics, which overlap with beam loss signal frequencies advanced digital processing beyond standard filtering is required. Several real-time functional blocks were simulated and tested on an FPGA: (1) a dual time-constant discharging integrator filter, (2) a de-ripple baseline extraction and storage block, and (3) a fast-recovery discharging integrator. The nonlinear IIR integrator filter removes high-frequency noise and feeds into the baseline extractor. Upon detecting abrupt beam loss, it switches to a longer time constant to prevent baseline distortion. The de-ripple block calculates a valid baseline by averaging over multiple 60 Hz periods, storing results in a 4096-word FPGA RAM. This baseline is subtracted from raw data before integration by the fast-recovery block, which resets quickly after use. All blocks achieved expected performance.

Wu, J. [Fermilab] (ORCID:0000000344329521)↗

A stable potential-based time-domain method for wideband elec- tromagnetic analysis

In previous research, the frequency-domain A-ϕ formulation has been validated using the finite element method for electromagnetic simulations of low-frequency and multi- scale problems, demonstrating excellent numerical accuracy, good matrix condition, and high computational efficiency. Time- domain simulations provide significant advantages for modeling wideband problems and are crucial for multiphysics applications. In this paper, the frequency-domain A-ϕ formulation is extended to the time domain. The central difference scheme is employed for temporal discretization to ensure both accuracy and stability. A numerical example is presented to demonstrate the capability of the proposed time-domain method in wideband electromagnetic analysis.

Mekonnen, Minyichil↗