Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “layered cathodes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Use of Auger spectroscopy in the evaluation of thermionic cathodes

Auger spectroscopy has been used to evaluate the properties of 'good' and 'poor' impregnated tungsten cathodes used in high-power microwave wave tubes. The results were interpreted to analyze failure modes in cathodes removed from TWT's because of poor emission characteristics. Most of the poor cathodes evaluated in this program were obtained from fabricated electron guns that had been employed and discarded from the 200-W TWT tubes developed for the Communication Technology Satellite program. The results of these measurements have shown there are at least two types of failure modes that one observes with poor cathodes. They are (1) chemical contamination of the cathode surface and (2) low partial layer barium coverage of the cathode surface.

Forman, R.↗
NASA NTRS1969

Cathodochromic storage device

A memory and display device has been developed by combing a fast phosphor layer with a cathodochromic layer in a cathode ray tube. Images are stored as patterns of electron beam induced optical density in the cathodo-chromic material. The stored information is recovered by exciting the backing, fast phosphor layer with a constant current electron beam and detecting the emitted radiation which is modulated by absorption in the cathodochromic layer. The storage can be accomplished in one or more TV frames (1/30 sec each). More than 500 TV line resolution and close to 2:1 contrast ratio are possible. The information storage time in a dark environment is approximately 24 hours. A reconstituted (readout) electronic video signal can be generated continuously for times in excess of 10 minutes or periodically for several hours.

Bosomworth, D. R.↗
DOE OSTI2024

Fast Oxygen Redox Kinetics Induced by CoO 6 Octahedron With π –Interaction in P2–Type Sodium Oxides

Enhancing the kinetics of lattice oxygen redox (LOR) in P2-type layered sodium oxide cathodes is crucial for the advancement of sodium-ion batteries (SIBs) with superior energy and power densities. Electronic structure regulation stands out as a highly effective approach to address the inherent limitations of P2-type layered oxides with LOR, including sluggish kinetics, phase transitions, voltage hysteresis, and local structural distortion. In this work, a strategy involving the introduction of CoO 6 octahedra with π-interaction into Na 0.6 Li 0.1 Fe 0.3–x Co x Mn 0.6 O 2 (x = 0, 0.15, 0.3) cathodes to facilitate Na-ion transport is proposed. Furthermore, the impact of FeO 6 octahedra with σ-interaction in P2-type cathodes on electrochemical performance is comprehensively investigated. Through multimodal in-situ and ex-situ characterization techniques, it is revealed that Co–O with π-interaction effectively mitigates P2-OP4 phase transitions by strengthening Na–O, reduces voltage hysteresis, and stabilizes the local structure. Consequently, Na 0.6 Li 0.1 Co 0.3 Mn 0.6 O 2 demonstrates enhanced Na-ion diffusion kinetics, leading to improved rate performance and a reversible capacity of 55 mAh g –1 at 10 C, significantly outperforming cathodes with Fe–O σ-interaction. Moreover, when coupled with hard carbon, the full cell achieves a remarkable energy density of 395 Wh kg –1 (on cathode) at 0.1 C, with a capacity retention of 75% over 100 cycles at 1 C.

25 ENERGY STORAGE↗
DOE OSTI2023

Lithium battery

The present disclosure describes various types of batteries, including lithium-ion batteries having an anode assembly comprising: an anode comprising a first porous ceramic matrix having pores; and a ceramic separator layer affixed directly or indirectly to the anode; a cathode; an anode-side current collector contacting the anode; and anode active material comprising lithium located within the pores or cathode active material located within the cathode; wherein, the ceramic separator layer is located between the anode and the cathode, no electrically conductive coating on the pores contacts the separator layer, and in a fully charged state, lithium active material in the anode does not contact the separator layer. Also disclosed are methods of making and methods of using such batteries.

25 ENERGY STORAGE↗
NASA NTRS1989

Electronic structure of BaO/W cathode surfaces

The local electronic structure of the emissive layer of barium dispenser thermionic cathodes is investigated theoretically using the relativistic scattered-wave approach. The interaction of Ba and O with W, Os, and W-Os alloy surfaces is studied with atomic clusters modeling different absorption environments representative of B- and M-type cathodes. Ba is found to be strongly oxidized, while O and the metal substrate are in a reduced chemical state. The presence of O enhances the surface dipole and Ba binding energy relative to Ba on W. Model results for W-Os alloy substrates show only relatively small changes in Ba and O for identical geometries, but very large charge redistributions inside the substrate, which are attributed to the electronegativity difference between Os and W. If Os is present in the surface layer, the charge transfer from Ba to the substrate and the Ba binding energy increase relative to W. Explanations are offered for the improved electron emission from alloy surfaces and the different emission enhancement for different alloy substrates.

Muller, Wolfgang↗
DOE OSTI2023

Understanding High-Voltage Behavior of Sodium-Ion Battery Cathode Materials Using Synchrotron X-ray and Neutron Techniques: A Review

Despite substantial research efforts in developing high-voltage sodium-ion batteries (SIBs) as high-energy-density alternatives to complement lithium-ion-based energy storage technologies, the lifetime of high-voltage SIBs is still associated with many fundamental scientific questions. In particular, the structure phase transition, oxygen loss, and cathode–electrolyte interphase (CEI) decay are intensely discussed in the field. Synchrotron X-ray and neutron scattering characterization techniques offer unique capabilities for investigating the complex structure and dynamics of high-voltage cathode behavior. In this review, to accelerate the development of stable high-voltage SIBs, we provide a comprehensive and thorough overview of the use of synchrotron X-ray and neutron scattering in studying SIB cathode materials with an emphasis on high-voltage layered transition metal oxide cathodes. We then discuss these characterizations in relation to polyanion-type cathodes, Prussian blue analogues, and organic cathode materials. Finally, future directions of these techniques in high-voltage SIB research are proposed, including CEI studies for polyanion-type cathodes and the extension of neutron scattering techniques, as well as the integration of morphology and phase characterizations.

25 ENERGY STORAGE↗
DOE OSTI2026

Stabilizing Cathode–Electrolyte Interphase of Nickel-Rich Single-Crystal Cathodes for Lithium-Ion Batteries

Nickel-rich single-crystal (SC) layered oxides are promising cathode candidates for next-generation lithium-ion batteries (LIBs) owing to their high energy density and structural robustness against intergranular cracking. However, their intrinsic surface reactivity with liquid electrolytes accelerates parasitic reactions at the cathode–electrolyte interphase (CEI), leading to transition-metal dissolution, gas generation, and impedance buildup. In this work, we synthesized SC-Li x Ni 0.9 Mn 0.05 Co 0.05 O 2 (NMC9055, 1 ≤ x ≤ 1.2) using a eutectic-assisted method and investigated interface stabilization strategies. A nickel-deficient Li x Ni 0.6 Mn 0.2 Co 0.2 O 2 (NMC622, 1 ≤ x ≤ 1.2) coating was applied via evaporation-based deposition to suppress CEI degradation pathways. Structural and compositional analyses confirmed uniform shell formation and preserved particle integrity. Half-cell electrochemical testing against lithium metal revealed ∼10% higher capacity retention and improved reversibility compared with pristine SC NMC9055, particularly under high-voltage operation. In conclusion, these results highlight the critical role of controlled surface chemistry in mitigating CEI instability in nickel-rich SC cathodes, offering a pathway toward enabling durable high-energy LIBs.

Coating processes↗
DOE OSTI2022

Facile Surface Coatings for Performance Improvement of NMC811 Battery Cathode Material

High nickel content layered oxide LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) is a promising cathode material with a high theoretical capacity of 200 mAh g -1 for use in high energy density lithium-ion batteries. However, its surface can easily get passivated by LiOH and Li 2 CO 3 due to its surface residual Li 2 O being reacting with ambient moisture and CO 2 . Herein, NMC811 was treated in a 3.0 M solution of lithium bis(fluorosulfonyl)imide (LiFSI) in dimethyl carbonate (DMC) at 60 °C for 8 h, 16 h and 24 h, respectively, resulting in coating of the NMC811 surface with LiF due to the basic nature of those residual lithium salts that react with LiFSI. The facile treatment of NMC811 in LiFSI/DMC not only improves the cycling stability but also enhances the capacity of the Li/NMC811 cells, mainly because of the thinning of the Li 2 CO 3 layer as suggested by cyclic voltammograms and impedance analyses. This method opens a new avenue for activation of passivated NMC811 particles for practical battery applications.

25 ENERGY STORAGE↗
NASA NTRS1992

Plasma dynamics on current-carrying magnetic flux tubes

A 1D numerical simulation is used to investigate the evolution of a plasma in a current-carrying magnetic flux tube of variable cross section. A large potential difference, parallel to the magnetic field, is applied across the domain. The result is that density minimum tends to deepen, primarily in the cathode end, and the entire potential drop becomes concentrated across the region of density minimum. The evolution of the simulation shows some sensitivity to particle boundary conditions, but the simulations inevitably evolve into a final state with a nearly stationary double layer near the cathode end. The simulation results are at sufficient variance with observations that it appears unlikely that auroral electrons can be explained by a simple process of acceleration through a field-aligned potential drop.

Swift, Daniel W.↗
DOE OSTI2020

Origin of Capacity Degradation of High-Voltage KVPO 4 F Cathode

Potassium vanadium fluorophosphate (KVPO 4 F) is one of the most promising cathode candidates for K-ion batteries because of its high specific capacity, voltage, and energy density. However, reducing its capacity fade remains an important challenge. This work leverages structure and electrochemical analysis to understand the capacity degradation mechanism of the KVPO 4 F cathode. Interestingly, no structural degradation of the KVPO4F cathode is detected after 200 cycles in the wide voltage window of 5.0-2.5 V (vs K/K + ). Instead, the capacity degradation is attributed to electrolyte decomposition at high voltage ( > 4.5 V vs K/K + ), which causes drying of the electrolyte and the formation of insulating layers on the cathode surface, significantly increasing the polarization. The properties of four KPF 6 - A nd carbonate-based K electrolytes are compared, and 0.7 M KPF 6 in ethylene carbonate/propylene carbonate exhibits the highest oxidation stability and results in the best cycling stability for the KVPO 4 cathode. These findings suggest that the key to improving the cycling stability of KVPO 4 F is to develop novel K electrolytes with even higher oxidation stability.

25 ENERGY STORAGE↗
DOE OSTI2024

Tailoring Solvation Solvent in Localized High-Concentration Electrolytes for Lithium||Sulfurized Polyacrylonitrile

Sulfurized polyacrylonitrile (SPAN) is a promising cathode material for lithium-sulfur (Li-S) batteries due to its significantly reduced polysulfide (PS) dissolution compared to the elemental S cathode. Although conventional carbonate-based electrolytes is stable with SPAN electrodes, it is less stable with Li metal anode (LMA). Recently, localized high-concentration electrolytes (LHCEs) have been developed to improve the stability of LMA. Here, we report a new strategy to further improve the performance of LI||SPAN batteries by replacing the conventional solvating solvent 1,2-dimethoxyethane (DME) in the LHCE with a new solvating solvent, 1,2-diethoxyethane (DEE), the new LHCEs exhibits less reactivity against Li 2 S 2 , alleviates PS dissolution, forms a better cathode-electrolyte interphase layer on the SPAN, and enhances structure reversibility even at elevated temperature (ET, 45°C). With the same salt and diluent as in other LHCEs, the LHCE with DEE leads to better performance in Li||SPAN batteries (with 82.9% capacity retention after 300 cycles at ET), preservation of SPAN cathode structure, and suppression of the volume change of LMA. The similar strategy on tailoring the solvating solvents in LHCEs can also be used in other rechargeable batteries to improve their performances.

1,2-diethoxyethane↗
DOE OSTI2023

Enabling Ambient Stability of LiNiO 2 Lithium-Ion Battery Cathode Materials via Graphene–Cellulose Composite Coatings

Nickel-rich layered oxides are widely used as cathode materials for energy-dense lithium-ion batteries. These chemistries, based on the parent compound LiNiO 2 (LNO), are highly sensitive to ambient environments and are known to readily react with moisture and carbon dioxide. As a result, impurities such as lithium hydroxides and lithium carbonates are formed at the LNO surface, compromising electrochemical behavior. Here, we address this issue by coating LNO cathode particles with a hydrophobic barrier layer composed of graphene and ethyl cellulose (GrEC). This coating limits contact between atmospheric moisture and the LNO surface, which minimizes the generation of lithium impurities. This scheme is evaluated by exposing coated LNO to humidified CO 2 for 24 h as an accelerated ambient degradation test. Subsequent spectroscopy, microscopy, and electrochemical characterization show no detectable signatures of carbonates on the LNO surface, thus verifying that the GrEC coating prevents ambient degradation. In conclusion, by demonstrating this methodology for the ultimate nickel-rich chemistry, this approach can likely be generalized to a wide range of ambient-sensitive battery materials.

25 ENERGY STORAGE↗
DOE OSTI2021

Implicit and coupled fluid plasma solver with adaptive Cartesian mesh and its applications to non-equilibrium gas discharges

In this work, we present a new fluid plasma solver with adaptive Cartesian mesh (ACM) based on a full-Newton (nonlinear, implicit) scheme for non-equilibrium gas discharge plasma. The electrons and ions are described using drift-diffusion approximation coupled to Poisson equation for the electric field. The electron-energy transport equation is solved to account for electron thermal conductivity, Joule heating, and energy loss of electrons in collisions with neutral species. The rate of electron-induced ionization is a function of electron temperature and could also depend on electron density (important for plasma stratification). The ion and gas temperature are kept constant. The transport equations are discretized using a non-isothermal Scharfetter-Gummel scheme to resolve possible large temperature gradients in the sheaths. We demonstrate the new solver for simulations of direct current (DC) and radiofrequency (RF) discharges. The implicit treatment of the coupled equations allows using large time steps. The full-Newton method (FNM) enables fast nonlinear convergence at each time step, offering significantly improved simulation efficiency. We discuss the selection of time steps for solving different plasma problems. The new solver enables solving several problems we could not solve before with existing software: two- and three-dimensional structures of the entire DC discharges including cathode and anode regions, electric field reversals and double-layer formation, the normal cathode spot and an anode ring, moving striations in diffuse and constricted DC discharges, and standing striations in RF discharges. The developed FNM-ACM technique offers many benefits for tackling the disparity of gas discharge plasma systems' time scales and nonlinearity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Advanced All-Fluorinated Electrolytes for Extended Cycle Life and Stability of Li||SPAN Batteries

Achieving long-term stability and consistent capacity in lithium (Li) metal batteries with sulfurized polyacrylonitrile (SPAN) cathodes requires precisely engineered electrolytes to optimize interphase formation and redox reversibility. Here, this study presents 1,1-difluoro-2-(2-methoxyethoxy)ethane (DFE)-based localized high-concentration electrolytes (LHCEs), incorporating fluorinated components such as salt, solvating solvent, and diluent for improved electrode stability. Molecular dynamics simulations and surface analyses reveal that the DFE-LHCE with 1,2-bis(1,1,2,2-tetrafluoroethoxy)ethane (BTFEE) diluent produces uniform and robust interphase layers on both cathode and anode, enriched with inorganic species like LiF and Li 2 O. These properties lead to prolonged redox reversibility of the SPAN cathode, suppressed side reactions, and extended cycle life for Li||SPAN cells. Remarkably, DFE-BTFEE-LHCE enables Li||SPAN coin cells with an areal capacity of ∼7 mAh cm -2 for SPAN to retain 81.3% capacity after 200 cycles and pouch cells of 0.12 Ah with 8 mAh cm -2 of SPAN and lean electrolyte to maintain 96.4% capacity over 80 cycles. These findings pave the way for advancing Li||SPAN battery technologies.

25 ENERGY STORAGE↗
DOE OSTI2026

A Reflection on the Evolution of Sodium/Metal Chloride (ZEBRA) Batteries and Lithium-Ion Cathode Materials (1975–2025): A Tribute to Johan Coetzer

This narrative summarizes, in retrospect, the enormous and quietly-conducted contribution of Dr Johan Coetzer, a South African scientist and entrepreneur, to the discovery, development and implementation of the high temperature sodium—metal chloride “ZEBRA” battery (Na/β-Al 2 O 3 , NaAlCl 4 /MCl 2 (M = Ni, Fe)). Here, this research activity was initiated in the mid 1970’s at the Council for Scientific and Industrial Research (CSIR) in South Africa and subsequently developed primarily in partnership with the Atomic Energy Research Establishment (AERE, Harwell, UK), Beta R&D (Derby, UK) and Daimler Benz (Germany), before being transferred to industry worldwide for electric vehicle and energy storage applications, albeit at a relatively low production rate. Coetzer’s wide-ranging, innovative and, at times, unconventional scientific approach also laid the foundation for the discovery and implementation of manganese-based spinel and layered metal oxide cathode materials for the Li-ion battery industry.

ZEBRA Battery↗