Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “inner layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Electrohydrodynamic (EHD) Refrigerant Pump

An electrohydrodynamic (EHD) pump increases refrigerant flow rate and the resulting pressure in a vapor compression based cooling system for permitting reduced compressor sizes and power demands. The EHD pump disposes electrodes in a liquid path of the refrigerant flow, and increases fluid flow and resulting pressure by an induced liquid flow between a pair of asymmetric electrodes. Voltage applied to these electrodes results in a conduction pumping mechanism associated with heterocharge layers in the vicinity of the electrodes based on disassociation of a neutral electrolyte species in the refrigerant fluid and recombination of the generated ions. The induced flow draws the liquid due to a net fluid flow toward one of the electrodes based on the asymmetry of the electrode pair. Electrodes are disposed on an inner surface of a refrigerant vessel, in communication with an annular liquid film that forms around the inner circumference in two-phase fluid systems.

Yagoobi, Jamal S.↗
NASA NTRS1992

Vacuum Plasma Spraying Replaces Electrodeposition

Vacuum plasma spraying used to fabricate large parts with complicated contours and inner structures, without uninspectable welds. Reduces time, and expense of fabrication. Wall of combustion chamber built up inside of outer nickel-alloy jacket by plasma spraying. Particles of metal sprayed partially melted in plasma gun and thrown at supersonic speed toward deposition surface. Vacuum plasma-spray produces stronger bond between the grooves and covering layer completing channels and wall of combustion chamber. In tests, bond withstood pressure of 20 kpsi, three times allowable limit by old method.

Holmes, Richard R.↗
NASA NTRS2016

Design and Operation of a Calorimeter for Advanced Multilayer Insulation Testing

A calorimeter has been constructed to accurately measure insulation performance with a nominal 90K cold outer boundary and a 20K inner boundary. Unique features of this design include use of mechanical cryocoolers instead cryogens and measurement of the heat load with a calibrated rod to serve as a conduction path. The calorimeter is operational and has completed its first test series. The initial test series was designed to look for differences in performance between a single layer of aluminum foil and a sheet of double aluminized mylar (DAM). Although it has been speculated that the aluminum foil would perform better, since the mylar coating might not thick enough to stop the transmission of long wave length infrared radiation, our testing showed a higher heat load for the aluminum foil than the DAM. The aluminum foil showed a heat load of 132 mW at an 87 K outer temperature and 152 mW at a 107K outer temperature. Whereas the DAM showed a heat load of 66 mW at an 88 K outer temperature and 81 mW at 108 K.

Cryogenics↗
NASA NTRS1992

The prediction of noise radiation from supersonic elliptic jets

This paper describes the prediction of noise radiation from supersonic elliptic jets. The noise is associated with the large scale structures in the jet mixing layer. These structures are described as instability waves. The local characteristics of the instability waves are determined from a compressible, linear, analysis. The jet mean velocity and density are described in elliptic cylindrical coordinates. The local eigensolution for the instability waves is determined from a finite difference solution of the non-separable boundary value problem. This inner solution which is formulated in terms of the method of multiple scales is matched with the radiated field using the method of matched asymptotic expansions. The form of the far-field directivity is derived. Predictions are presented for the noise radiation by the several modes of instability in the elliptic jet. The radiated field is not axisymmetric and certain modes radiate strongly in the directions of the major and minor axes of the jet. The extension of the present work to other geometries and flow fields is discussed.

Morris, Philip J.↗
NASA NTRS1993

Method of fabricating a rocket engine combustion chamber

A process for making a combustion chamber for a rocket engine wherein a copper alloy in particle form is injected into a stream of heated carrier gas in plasma form which is then projected onto the inner surface of a hollow metal jacket having the configuration of a rocket engine combustion chamber is described. The particles are in the plasma stream for a sufficient length of time to heat the particles to a temperature such that the particles will flatten and adhere to previously deposited particles but will not spatter or vaporize. After a layer is formed, cooling channels are cut in the layer, then the channels are filled with a temporary filler and another layer of particles is deposited.

Holmes, Richard R.↗
NASA NTRS1993

Introduction to the Ulysses encounter with Jupiter

The Ulysses spacecraft encountered Jupiter in February 1992, passing within 6.31 radii of the planet. For approximately 8 days it was inside the Jovian magnetosphere, and for several days before and after that, Ulysses was in the interaction regions formed by the solar wind (the magnetosheath and boundary layer). The inbound trajectory was at an approximately 1000 LT and the outbound trajectory was at 1800 LT, that is, dusk, a unique feature of the flight path. Three regions interior to the magnetosphere were identified as on previous missions both inbound and outbound. In addition, the spacecraft twice penetrated a cusplike region at high latitude in the inner magnetosphere. Following closest approach, Ulysses traversed the Io plasma torus in basically a north-south direction. Although Ulysses is a heliospheric mission, the experiments were suited to an investigation of Jupiter's magnetosphere and have returned much new information. This introduction to the accompanying articles by the Ulysses investigators provides basic information on the experiments, the spacecraft, and the trajectory. In addition, the scientific context of the encounter is reviewed on the basis of the preliminary analyses of the Ulysses observations and a rudimentary comparison with the earlier Pioneer and Voyager results. Some important scientific questions raised by the encounter, along with some tentative answers, are presented.

Smith, Edward J.↗
NASA NTRS2010

Low Mass Printable Devices for Energy Capture, Storage, and Use

The energy-efficient, environmentally friendly technology that will be presented is the result of a Space Act Agreement between NthDegree Technologies Worldwide, Inc., and the National Aeronautics and Space Administration's (NASA's) Marshall Space Flight Center (MSFC). The work combines semiconductor and printing technologies to advance lightweight electronic and photonic devices having excellent potential for commercial and exploration applications. Device development involves three projects that relate to energy generation and consumption: (1) a low-mass efficient (low power, low heat emission) micro light-emitting diode (LED) area lighting device; (2) a low-mass omni-directional efficient photovoltaic (PV) device with significantly improved energy capture; and (3) a new approach to building super-capacitors. These three technologies, energy capture, storage, and usage (e.g., lighting), represent a systematic approach for building efficient local micro-grids that are commercially feasible; furthermore, these same technologies, appropriately replacing lighting with lightweight power generation, will be useful for enabling inner planetary missions using smaller launch vehicles and to facilitate surface operations during lunar and planetary surface missions. The PV device model is a two sphere, light trapped sheet approximately 2-mm thick. The model suggests a significant improvement over current thin film systems. For lighting applications, all three technology components are printable in-line by printing sequential layers on a standard screen or flexographic direct impact press using the three-dimensional printing technique (3DFM) patented by NthDegree. One primary contribution to this work in the near term by the MSFC is to test the robustness of prototype devices in the harsh environments that prevail in space and on the lunar surface. It is anticipated that this composite device, of which the lighting component has passed off-gassing testing, will function appropriately in such environments consistent with NASA s exploration missions. Advanced technologies such as this show promise for both space flight and terrestrial applications.

Frazier, Donald O.↗
NASA NTRS2018

Laser Displacement Measurements of Fan Blades in Resonance and Flutter During the Boundary Layer Ingesting Inlet and Distortion-Tolerant Fan Test

NASA's Advanced Air Transport Technology Project is investigating boundary layer ingesting propulsors for future subsonic commercial aircraft to improve aircraft efficiency, thereby reducing fuel burn. To that end, a boundary layer ingesting inlet and distortion-tolerant fan stage was designed, fabricated, and tested within the 8' x 6' Supersonic Wind Tunnel at NASA Glenn Research Center. Because of the distortion in the air flow over the fan, the blades were designed to withstand a much higher aerodynamic forcing than for a typical clean flow. The blade response for several resonance modes were measured during start-up and shutdown, as well as at near 85% design speed. Flutter in the first bending mode was also observed in the fan at the design speed, at an off-design condition, although instabilities were difficult to instigate with this fan in general. Blade vibrations were monitored through twelve laser displacement probes that were placed around the inner circumference of the casing, at the blade leading and trailing edges. These probes captured the movement of all the blades during the entire test. Results are presented for various resonance mode amplitudes, frequencies and damping, as well as flutter amplitudes and frequency. Benefits and disadvantages of laser displacement probe measurements versus strain gage measurements are discussed.

NSMS↗
NASA NTRSDate not supplied

Magnetic Mapping in the Inner Magnetosphere using Kamodo

Many models require specialized access and interpolation schemes to effectively extract and interpolate their outputs. In particular, the Block-Adaptive Tree Solarwind Roe Upwind Scheme (BATSRUS) component of the Space Weather Modeling Framework (SWMF) requires Kamodo to take advantage of its block-based adaptive grid structure, and the Lyon-Fedder Mobarry magnetosphere model (or its successor GAMERA) needs a scheme that appreciates the distorted spherical arrangement of grid vertices on a non-orthogonal grid. With the flythrough layer developed by Ringuette et al. (SH42E-2337), the underlying model readers have been adapted to use multiple time steps in a single Python session to perform 4- dimensional interpolations in time and space. Kamodo now utilizes lazy interpolation that loads data only when needed. We present the successful integration of SWMF/BATSRUS magnetosphere access and interpolation into the new 4D Kamodo framework utilizing an external library of C code. Through function composition, Kamodo facilitates the calculation of derived quantities and the transformation of positions and vectors into different coordinate systems. This work is a significant step towards performing field line tracing in Kamodo with SWMF magnetosphere outputs.

Lutz Rastaetter↗
NASA NTRS1989

Radiative transfer theory for active remote sensing of a forested canopy

A canopy is modeled as a two-layer medium above a rough interface. The upper layer stands for the forest crown, with the leaves modeled as randomly oriented and distributed disks and needles and the branches modeled as randomly oriented finite dielectric cylinders. The lower layer contains the tree trunks, modeled as randomly positioned vertical cylinders above the rough soil. Radiative-transfer theory is applied to calculate EM scattering from such a canopy, is expressed in terms of the scattering-amplitude tensors (SATs). For leaves, the generalized Rayleigh-Gans approximation is applied, whereas the branch and trunk SATs are obtained by estimating the inner field by fields inside a similar cylinder of infinite length. The Kirchhoff method is used to calculate the soil SAT. For a plane wave exciting the canopy, the radiative-transfer equations are solved by iteration to the first order in albedo of the leaves and the branches. Numerical results are illustrated as a function of the incidence angle.

Karam, M. A.↗
NASA NTRS2018

A Dual Multilayer Insulation Blanket Concept to Radically Reduce Heat Loss From Thermally Controlled Spacecraft and Instruments

At large distances from the Sun (e.g. Jupiter/Saturn), the solar flux is less than 4% that at Earth. This requires very large solar arrays to meet the power demands of a typical new mission concept. Heat loss through Multi-Layer Insulation (MLI) blankets typically constitutes the vast majority of the total heat loss. Hence, improvements to MLI blankets that reduce heat loss are advantageous to the spacecraft design. The overall effective emittance (ε*) of MLI is usually a range dependent on the number of layers, size of blanket, seams, feedthroughs, layer density and operating temperatures of the heat source and heat sink. A concept has been developed at JPL to reduce the ε* by as much as a factor of two, which produces a corresponding reduction in heat losses. This concept utilizes two MLI blankets physically separated by traditional bumpers or spacers used for micrometeoroid protection. The outer surface of the inner blanket and the inner surface of the outer blanket are low emissivity surfaces to further minimize the total ε* of the overall dual MLI system. Analytical predictions of a dual MLI concept have been made using test data based ε* correlations. A development test has been conducted to validate the dual blanket design’s performance. This paper will describe the dual blanket design concept, schemes for its implementation, and the corresponding test results to validate its performance.

Duran, Mark↗
NASA NTRS1980

Implications of the high-state iron-line feature and soft X-ray emission of Hercules X-1

The interpretation that the soft X-ray emission of Her X-1 is due to reprocessing of the primary hard X-rays intercepted by a plasma layer in the Alfven surface imposes quite a stringent - but not an unreasonable - constraint on its parameters. By using the Alfven shell parameters constrained by this interpretation, the degree of ionization of the Alfven shell is calculated. Because the flux of hard X-ray from the neutron star is greatly attenuated inside the Alfven shell, except for a skin depth from its inner surface, the degree of ionization is determined by photoionization due to soft X-rays produced within the Alfven shell. On one hand, the large soft X-ray luminosity, which is about the same as the hard X-ray luminosity, indicates that a substantial fraction of primary hard X-rays is absorbed by the Alfven shell. On the other hand, the fact that the hard X-ray spectrum of Her X-1 observed during the high state shows neither a significant absorption feature down to about 3 keV nor an iron K-absorption dip tells us that the hard X-rays observed at the earth are mostly not reprocessed. This apparent conflict is resolved if the Alfven shell is clumpy (i.e., made of streams or blobs). The observed iron-line feature around 6.5 keV (E.W. about 300 keV) is explained by fluorescent iron K photons produced as a by-product of reprocessing of the hard X-rays by the Alfven shell; for this a large enhancement of the iron abundance with respect to the solar value is not required.

Bai, T.↗
NASA NTRS2012

GOT C+ Survey of [CII] 158 Micrometer Emission: Atomic to Molecular Cloud Transitions in the Inner Galaxy

We present the results of the distribution of CO-dark H2 gas in a sample of 2200 interstellar clouds in the inner Galaxy (l = 90 deg to +57 deg) detected in the velocity resolved [CII] spectra observed in the GOT C+ survey using the Herschel HIFI. We analyze the [CII] intensities along with the ancillary HI, (12)CO and (13)CO data for each cloud to determine their evolutionary state and to derive the H2 column densities in the C(+) and C(+)/CO transition layers in the cloud. We discuss the overall Galactic distribution of the [CII] clouds and their properties as a function Galactic radius. GOT C+ results on the global distribution of [CII] clouds and CO-dark H2 gas traces the FUV and star formation rates in the Galactic disk.

structure↗
NASA NTRS2018

ALMA Spectral Line and Imaging Survey of a Low and a High Mass-Loss Rate AGB Star Between 335 and 362 GHz

Context. Low and intermediate mass stars are known to power strong stellar winds when evolving through the asymptotic giant branch (AGB) phase. Initial mass, luminosity, temperature, and composition determine the pulsation characteristics of the star and the dust species formed in the pulsating photospheric layers. Radiation pressure on these grains triggers the onset of a stellar wind. However, as of today, we still cannot predict the wind mass-loss rates and wind velocities from first principles neither do we know which species are the first to condense in the upper atmospheric regions. Aims. We aim to characterise the dominant physical, dynamical, and chemical processes in the inner wind region of two archetypical oxygen-rich (C/O<1) AGB stars, that is, the low mass-loss rate AGB star R Dor (M~ 1x10(exp 7) M☉/yr) and the high mass-loss rate AGB star IK Tau (M~5x10(exp 6) M☉/yr). The purpose of this study is to observe the key molecular species contributing to the formation of dust grains and to cross-link the observed line brightnesses of several species to the global and local properties of the star and its wind. Methods. A spectral line and imaging survey of IK Tau and R Dor was made with ALMA between 335 and 362 GHz (band 7) at a spatial resolution of ~150 mas, which corresponds to the locus of the main dust formation region of both targets. Results. Some two hundred spectral features from 15 molecules (and their isotopologues) were observed, including rotational lines in both the ground and vibrationally excited states (up to v=5 for SiO). Detected species include the gaseous precursors of dust grains such as SiO, AlO, AlOH, TiO, and TiO2.We present a spectral atlas for both stars and the parameters of all detected spectral features. A clear dichotomy for the sulphur chemistry is seen: while CS, SiS, SO, and SO2 are abundantly present in IK Tau, only SO and SO2 are detected in R Dor. Also other species such as NaCl, NS, AlO, and AlOH display a completely different behaviour. From some selected species, the minor isotopologues can be used to assess the isotopic ratios. The channel maps of many species prove that both large and small-scale inhomogeneities persist in the inner wind of both stars in the form of blobs, arcs, and/or a disk. The high sensitivity of ALMA allows us to spot the impact of these correlated density structures in the spectral line profiles. The spectral lines often display a half width at zero intensity much larger than expected from the terminal velocity, v1, previously derived for both objects (36 km/s versus v(∞)~17.7 km/s for IK Tau and 23 km/s versus v(∞)~5.5 km/s for R Dor). Both a more complex 3D morphology and a more forceful wind acceleration of the (underlying) isotropic wind can explain this trend. The formation of fractal grains in the region beyond _400 mas can potentially account for the latter scenario. From the continuum map, we deduce a dust mass of ~3.7 x 10(exp 7) M☉ and ~2 x 10(ex0 8) M☉ for IK Tau and R Dor, respectively. Conclusions. The observations presented here provide important constraints on the properties of these two oxygen-dominated AGB stellar winds. In particular, the ALMA data prove that both the dynamical and chemical properties are vastly different for this high mass-loss rate (IK Tau) and low mass-loss rate (R Dor) star.

Stars: AGB and post-AGB, Stars: mass loss, Stars: ↗
NASA NTRS2018

ALMA Spectral Line and Imaging Survey of a Low and a High Mass-Loss Rate AGB Star Between 335 and 362 GHz

Context. Low and intermediate mass stars are known to power strong stellar winds when evolving through the asymptotic giant branch (AGB) phase. Initial mass, luminosity, temperature, and composition determine the pulsation characteristics of the star and the dust species formed in the pulsating photospheric layers. Radiation pressure on these grains triggers the onset of a stellar wind. However, as of today, we still cannot predict the wind mass-loss rates and wind velocities from first principles neither do we know which species are the first to condense in the upper atmospheric regions. Aims. We aim to characterise the dominant physical, dynamical, and chemical processes in the inner wind region of two archetypical oxygen-rich (C/O < 1) AGB stars, that is, the low mass-loss rate AGB star R Dor (M’ ∼ 1 × 10(exp −7) M/yr) and the high mass-loss rate AGB star IK Tau (M’ ∼ 5 × 10(exp −6) M/yr). The purpose of this study is to observe the key molecular species contributing to the formation of dust grains and to cross-link the observed line brightnesses of several species to the global and local properties of the star and its wind. Methods. A spectral line and imaging survey of IK Tau and R Dor was made with ALMA between 335 and 362 GHz (band 7) at a spatial resolution of ∼150 mas, which corresponds to the locus of the main dust formation region of both targets. Results. Some two hundred spectral features from 15 molecules (and their isotopologues) were observed, including rotational lines in both the ground and vibrationally excited states (up to v = 5 for SiO). Detected species include the gaseous precursors of dust grains such as SiO, AlO, AlOH, TiO, and TiO2. We present a spectral atlas for both stars and the parameters of all detected spectral features. A clear dichotomy for the sulphur chemistry is seen: while CS, SiS, SO, and SO2 are abundantly present in IK Tau, only SO and SO2 are detected in R Dor. Also other species such as NaCl, NS, AlO, and AlOH display a completely different behaviour. From some selected species, the minor isotopologues can be used to assess the isotopic ratios. The channel maps of many species prove that both large and small-scale inhomogeneities persist in the inner wind of both stars in the form of blobs, arcs, and/or a disk. The high sensitivity of ALMA allows us to spot the impact of these correlated density structures in the spectral line profiles. The spectral lines often display a half width at zero intensity much larger than expected from the terminal velocity, v∞, previously derived for both objects (36 km/s versus v(∞) ∼ 17.7 km/s for IK Tau and 23 km/s versus v(∞) ∼ 5.5 km/s for R Dor). Both a more complex 3D morphology and a more forceful wind acceleration of the (underlying) isotropic wind can explain this trend. The formation of fractal grains in the region beyond ∼400 mas can potentially account for the latter scenario. From the continuum map, we deduce a dust mass of ∼3.7 × 10(exp −7) Mand ∼2 × 10(exp −8) M for IK Tau and R Dor, respectively. Conclusions. The observations presented here provide important constraints on the properties of these two oxygen-dominated AGB stellar winds. In particular, the ALMA data prove that both the dynamical and chemical properties are vastly different for this high mass-loss rate (IK Tau) and low mass-loss rate (R Dor) star.

L. Decin↗
NASA NTRS1994

Effect of density gradients in confined supersonic shear layers, part 1

The effect of density gradients on the supersonic wall modes (acoustic modes) of a 2-D confined compressible shear layer were investigated using linear analysis. Due to the inadequacies of the hyperbolic tangent profile, the boundary layer basic profiles were used. First a test case was taken with the same parameters as in Tam and Hu's analysis with convective Mach number M(sub c) = 1.836 and density ratio of 1.398. Three generalized inflection points were found giving rise to three modes. The first two show similar properties to the Class A and B modes, and the third is an 'inner mode' which will be called a Class C mode. As the density ratio is increased, the smallest of the three neutral phase speeds tends towards the speed of the lower velocity stream, and the other two eventually coalesce and then disappear. These two effects lead to a linear resonance between the Class B modes which increases the cutoff frequency and growth rate of the lowest mode. In fact, growth rates of 2-4 times the test case were found as the density ratio was increased to 7. A similar trend is observed for the Class A modes when the density ratio is decreased from the test case, but the growth rate is not changed by much from the test case.

Peroomian, Oshin↗
NASA NTRS1978

Icy craters on the Galilean satellites

The high degree of echo depolarization observed for linearly polarized incident waves in the case of radar observations of Europa, Ganymede, and Callisto is consistent with a rough, icy surface. Measurements with circularly polarized waves, however, conducted in 1976 suggest that the types of surface irregularities found on the Galilean satellites must be very different from those on the moon and the inner planets. A description is presented of an investigation in which geometrical optics and the Stokes-vector formalism are employed to examine several possible configurations which could cause the circular polarization transmitted to exceed unity. On the basis of the obtained results it appears that a model which postulates that significant parts of the surfaces of the three satellites are covered with an icy layer at least several kilometers thick and saturated with hemispherical craters can explain nearly all the observed radar behavior.

Ostro, S. J.↗
NASA NTRS1979

Self stabilizing sonic inlet

An inlet suitable for a turbine engine in a STOL, VTOL or CTOL aircraft is described. A circumferentially extended slot is provided in the inner surface of the air inlet at the windward side and downstream of the throat region. The slot communicates with a circumferential plenum chamber formed in the front of the air inlet just behind the lip. Circumferentially extending rows of apertures are provided on the lip establishing two sets of apertures spaced circumferentially away from the slot in opposite directions. The slot removes the boundary layer from the critical portion of the diffuser to minimize or eliminate flow pressure loss or separations resulting from diffusion or tuning. The apertures are in a region of low static pressure on the lip of the inlet and serve as a source of suction to cause air flow into the slot.

Miller, B. A.↗