Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “impacts”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Sensitivity Study of Impact Risk Model Results to Thermal Radiation Damage Model for Large Objects

NASA’s Probabilistic Asteroid Impact Risk (PAIR) assessment model assesses the likelihood of potential damage for asteroid impact scenarios. Fast-running models are used to capture the effects of different hazards. This paper looks specifically at local ground damage hazards, including blast overpressure and thermal radiation damage, for large object impact scenarios. A sensitivity study is conducted to determine which parameters, and over what ranges, cause impact risks to become sensitive to thermal damage. Two additional thermal models with different approaches are used for comparison. The study determined the current thermal model is most sensitive to the luminous efficiency parameter that reflects the model’s uncertainty in the amount of energy contributing to the thermal radiation damage. This sensitivity was most apparent for the highest severity damage levels. Comparisons of the three models showed that in addition to sensitivities within the models, the impact risks are also sensitive to the choice of thermal model. The study results were applied to the 2023 Planetary Defense Conference hypothetical asteroid impact scenario and parameter ranges of interest determined. At the serious damage level, luminous efficiencies above 0.006 showed a small chance of thermal playing an important role, while luminous efficiencies above 0.0008 led to thermal playing a significant role at the unsurvivable damage severity level. Study results are used to identify key areas where additional model refinement and better knowledge of asteroid properties may be important for improving damage estimates.

SMD↗

Understanding the Response of Common Spacecraft Shields to Hypervelocity Impacts of Meteorite and Other Terrestrial Analog Materials

Micrometeoroid and orbital debris (MMOD) populations can vary significantly in composition, density, and homogeneity. Hypervelocity testing campaigns intended to design and optimize MMOD shields for spacecraft are recognizing the need to investigate shield response from different types of impactors that span the range of densities observed in the MMOD population, such as nylon, Al, Al 2 O 3 , steel, and Cu. These tests, however, still pre-dominantly employ spherical and homogenous projectiles. Adding any compositional or mineralogical complexity to the impactor, such as what would be expected from a polymineralic micrometeoroid, for ex-ample, will be concomitant with a more complex shockwave structure in the projectile after it impacts the outer surface of any type of MMOD shield. The magnitude of these complexities will depend on how varied the mineralogy of the projectile is, but in the case of a metal-bearing chondrite, the disparate shock impendence between adjacent metal and silicate grains will potentially create localized areas of shock focusing (local increase in nominal shock pressure), or shock shadowing (local decrease in nominal shock pressure). The response of a MMOD shield is generally predicted using a ballistic limit equation – a semiempirical curve, derived from hypervelocity testing data, that denotes a particle diameter (for a given set of impact conditions such as projectile density and impact angle) when a shield will fail as a function of impact speed. These curves exhibit inflection points as a function of impact speed that represent when the projectile experiences sufficient pressure to fragment, melt, or vaporize. The introduction of shock focusing and shadowing in a heterogenous projectile will add uncertainty to the predicted pressures needed to go through each transition, leading to increased uncertainty in the expected performance of the MMOD shield. Therefore, it is necessary to explore the performance of MMOD shields in hypervelocity tests against more complex, natural projectile materials. To this end we have conducted a comparative test series to begin investigating the impact damage caused by meteoritic and terrestrial-analog projectiles, to that of spherical Al projectiles of similar mass.

Impact testing↗

Toward Prebiotic Chemistry on Titan: Impact Experiments on Organic Haze Particles

Impacts are critical to producing the aqueous environments necessary to stimulate prebiotic chemistry on Titan's surface. Furthermore, organic hazes resting on the surface are a likely feedstock of biomolecules. In this work, we conduct impact experiments on laboratory-produced organic haze particles and haze/sand mixtures and analyze these samples for life's building blocks. Samples of unshocked haze and sand particles are also analyzed to determine the change in biomolecule concentrations and distributions from shocking. Across all samples, we detect seven nucleobases, nine proteinogenic amino acids, and five other biomolecules (e.g., urea) using a blank subtraction procedure to eliminate signals due to contamination. We find that shock pressures of 13 GPa variably degrade nucleobases, amino acids, and a few other organics in haze particles and haze/sand mixtures; however, certain individual biomolecules become enriched or are even produced from these events. Xanthine, threonine, and aspartic acid are enriched or produced in impact experiments containing sand, suggesting these minerals may catalyze the production of these biomolecules. On the other hand, thymine and isoleucine/norleucine are enriched or produced in haze samples containing no sand, suggesting catalytic grains are not necessary for all impact shock syntheses. Uracil, glycine, proline, cysteine, and tyrosine are the most unstable to impact-related processing. These experiments suggest that impacts alter biomolecule distributions on Titan's surface, and that organic hazes co-occurring with fine-grained material on the surface may provide an initial source for further prebiotic chemistry on Titan.

impact experiments↗

Characterization of Low-Velocity Impact Damage in Toughened Non-Crimp Fabric Laminates

The damage response of resin-infused composites was investigated using quasi-static indentation (QSI) and instrumented drop-weight impact testing. The test specimens were composed of six layers of non-crimp fabrics where each layer contained +45°, 90°, −45°, and 0° plies. The goals of the testing were to identify damage responses that may differ from traditional thermoset materials and provide damage characterization data to evaluate current damage prediction analyses and aid improvements to current damage models. The damage was characterized using X-ray computed tomography (CT) and ultrasonic testing (UT). Incremental QSI loading was used on a single specimen to investigate damage growth in nine steps at progressively higher loads. Realtime acoustic emission data were used to determine the unloading points. Unlike typical thermoset composites, the force-displacement was smooth and showed no obvious indications of damage. The primary damage consisted of large lines of fiber fracture on the plies near the impact surface and delaminations through the thickness. Nine specimens were impacted at nominal impact energies of 25 ft-lbs, 30 ft-lbs, and 35 ft-lbs. The force histories at each energy followed nearly identical paths. Again, no obvious signs of damage were observed in any of the force histories. The general damage response in the dynamic tests was similar to the QSI-loaded specimens. However, repeat specimens impacted with a given impact energy showed variations in the damage. Some characteristics of the damage response were different than those typically observed in thermoset composites and will need to be evaluated using current analysis methods.

Composite Materials↗

Characterization of Low-Velocity Impact Damage in Toughened Non-Crimp Fabric Laminates

The damage response of resin-infused composites was investigated using quasi-static indentation (QSI) and instrumented drop-weight impact testing. The test specimens were composed of six layers of non-crimp fabrics where each layer contained +45°, 90°, −45°, and 0° plies. The goals of the testing were to identify damage responses that may differ from traditional thermoset materials and provide damage characterization data to evaluate current damage prediction analyses and aid improvements to current damage models. The damage was characterized using X-ray computed tomography (CT) and ultrasonic testing (UT). Incremental QSI loading was used on a single specimen to investigate damage growth in nine steps at progressively higher loads. Realtime acoustic emission data were used to determine the unloading points. Unlike typical thermoset composites, the force-displacement was smooth and showed no obvious indications of damage. The primary damage consisted of large lines of fiber fracture on the plies near the impact surface and delaminations through the thickness. Nine specimens were impacted at nominal impact energies of 25 ft-lbs, 30 ft-lbs, and 35 ft-lbs. The force histories at each energy followed nearly identical paths. Again, no obvious signs of damage were observed in any of the force histories. The general damage response in the dynamic tests was similar to the QSI-loaded specimens. However, repeat specimens impacted with a given impact energy showed variations in the damage. Some characteristics of the damage response were different than those typically observed in thermoset composites and will need to be evaluated using current analysis methods.

Composite Materials↗

Simultaneous impact and lunar craters

The existence of large terrestrial impact crater doublets and crater doublets that have been inferred to be impact craters on Mars suggests that simultaneous impact of two or more bodies can occur at nearly the same point on planetary surfaces. An experimental study of simultaneous impact of two projectiles near one another shows that doublet craters with ridges perpendicular to the bilateral axis of symmetry result when separation between impact points relative to individual crater diameter is large. When separation is progressively less, elliptical craters with central ridges and peaks, and circular craters with deep round bottoms are produced. These craters are similar in structure to many of the large lunar craters. Results suggest that the simultaneous impact of meteoroids near one another may be an important mechanism for the production of central peaks in large lunar craters.

Oberbeck, V. R.↗

Theoretical analysis of impact in composite plates

The calculated stresses and displacements induced anisotropic plates by short duration impact forces are presented. The theoretical model attempts to model the response of fiber composite turbine fan blades to impact by foreign objects such as stones and hailstones. In this model the determination of the impact force uses the Hertz impact theory. The plate response treats the laminated blade as an equivalent anisotropic material using a form of Mindlin's theory for crystal plates. The analysis makes use of a computational tool called the fast Fourier transform. Results are presented in the form of stress contour plots in the plane of the plate for various times after impact. Examination of the maximum stresses due to impact versus ply layup angle reveals that the + or - 15 deg layup angle gives lower flexural stresses than 0 deg, + or - 30 deg and + or - 45 deg. cases.

Moon, F. C.↗

Error analysis of penetrator impacts on bodies without atmospheres

Penetrators are missile shaped objects designed to implant electronic instrumentation in various of surface materials with a nominal impact speed around 150 m/sec. An interest in the application of this concept to in situ subsurface studies of extra terrestrial bodies and planetary satellites exists. Since many of these objects do not have atmospheres, the feasibility of successfully guiding penetrators to the required near-zero angle-of-attack impact conditions in the absence of an atmosphere was analyzed. Two potential targets were included, i.e., the moon and Mercury and several different penetrator deployment modes were involved. Impact errors arising from open-loop and closed-loop deployment control systems were given particular attention. Successful penetrator implacement requires: (1) that the impact speed be controlled, nominally to 150 m/sec, (2) that the angle of attack be in range 0 deg - 11 deg at impact, and (3) that the impact flight path angle be with 15 deg of vertical.

Davis, D. R.↗

Impact of composite plates: Analysis of stresses and forces

The foreign object damage resistance of composite fan blades was studied. Edge impact stresses in an anisotropic plate were first calculated incorporating a constrained layer damping model. It is shown that a very thin damping layer can dramatically decrease the maximum normal impact stresses. A multilayer model of a composite plate is then presented which allows computation of the interlaminar normal and shear stresses. Results are presented for the stresses due to a line impact load normal to the plane of a composite plate. It is shown that significant interlaminar tensile stresses can develop during impact. A computer code was developed for this problem using the fast Fourier transform. A marker and cell computer code were also used to investigate the hydrodynamic impact of a fluid slug against a wall or turbine blade. Application of fluid modeling of bird impact is reviewed.

Moon, F. C.↗

Effect of Low Velocity Impact Damage on the Compressive Strength of Graphite/Epoxy Hat-Stiffened Panels

Low velocity impact damage on the compressive strength of graphite/epoxy hat stiffened panels is studied. Fourteen panels, representative of minimum-mass designs for two compression load levels were tested. Eight panels were damaged by impact and the effect on compressive strength was evaluated by comparing the results with data for undamaged panels. The impact tests consisted of firing 1.27 cm diameter aluminum projectiles normal to the plane of the panel at a velocity of approximately 55 m/sec to simulate impact from runway debris. The results of this investigation indicate that impact damage in the panels designed for 0.53 MN/m was contained locally and the damaged panels were capable of carrying the design load. The panels designed for 1.58 MN/m failed between 50 and 58 percent of the design load due to impact damage in the high axial stiffness region. The extent of damage in the high axial stiffness region of both panel designs increased with the magnitude of applied axial load. Damage in this region was the most significant factor in reducing panel strength. Limited damage that was not visually detectable reduced ultimate strength as much as extensive visible damage.

Rhodes, M. D.↗

Thermal environment effects on strength and impact properties of boron-aluminum composites

Thermal effects on fracture strength and impact energy were studied in 50 volume percent unidirectional composites of 143 and 203 micron boron fibers in 6061 and 1100 aluminum matrices. For 6061 matrix composites, strength was maintained to approximately 400 C in the cyclic tests and higher than 400 C in the static tests. For the 1100 matrix composites, strength degradation appeared near 260 C after cycling and higher than 260 C in static heating. This composite strength degradation is explained by a fiber degradation mechanism resulting from a boron-aluminum interface reaction. The impact energy absorption degraded significantly only above 400 C for both matrix alloys. Thus, while impact loss for the 6061 composite correlates with the fiber strength loss, other energy absorption processes appear to extend the impact resistance of the 1100 matrix composites to temperatures beyond where its strength is degraded. Interrupted impact tests on as-received and thermally cycled composites define the range of load over which the fibers break in the impact event.

Grimes, H. H.↗

Impact behavior of filament wound graphite/epoxy fan blades

The fabrication and impact tests of graphite/epoxy filament wound fan blades are discussed. Blades which were spin tested at tip speeds up to 305 meters per second retained their structural integrity. Two blades were each impacted with a 454 gram slice of a 908 gram simulated bird at a tip speed of 263 meters per second and impact angles of 22 and 32 deg. The impact tests were recorded with high-speed movie film. The blade which was impacted at 22 deg sustained some root delamination but remained intact. The 32 deg impact separated the blade from the root. No local damage other than leading edge debonding was observed for either blade. Results of a failure mode analysis are also discussed.

Bowles, K. J.↗

Meteorite impact ejecta - Dependence of mass and energy lost on planetary escape velocity

The amounts of material and energy which escape a planet in a meteorite impact event is calculated as functions of impact and escape velocities. Results are obtained from the computed flow induced by the impact of iron and gabbroic anorthosite spheres onto a half-space of anorthosite at impact velocities of 5 to 45 km/sec. The impact-induced flows were determined by a numerical method using the mass, momentum, and energy conservation relations in finite-difference approximation, within an Eulerian computational grid. The impact velocities at which ejecta losses equal meteorite mass gains are found to be approximately 20, 35, and 45 km/sec for anorthosite objects and approximately 25, 35, and 40 km/sec for iron objects striking anorthosite surfaces for the gravity fields of the moon, Mercury and Mars.

Okeefe, J. D.↗

Interactive multi-mode blade impact analysis

The theoretical methodology used in developing an analysis for the response of turbine engine fan blades subjected to soft-body (bird) impacts is reported, and the computer program developed using this methodology as its basis is described. This computer program is an outgrowth of two programs that were previously developed for the purpose of studying problems of a similar nature (a 3-mode beam impact analysis and a multi-mode beam impact analysis). The present program utilizes an improved missile model that is interactively coupled with blade motion which is more consistent with actual observations. It takes into account local deformation at the impact area, blade camber effects, and the spreading of the impacted missile mass on the blade surface. In addition, it accommodates plate-type mode shapes. The analysis capability in this computer program represents a significant improvement in the development of the methodology for evaluating potential fan blade materials and designs with regard to foreign object impact resistance.

Alexander, A.↗

Impact behavior of filament-wound graphite/epoxy fan blades

The fabrication and impact tests of graphite/epoxy filament wound fan blades are discussed. Blades which were spin tested at tip speeds up to 305 m/sec retained their structural integrity. Two blades were each impacted with a 454-g slice of a 908-g simulated bird at a tip speed of 263 deg and impact angles of 22 deg and 32 deg. The impact tests were recorded with high-speed movie film. The blade which was impacted at 22 deg sustained some root delamination but remained intact. The 32 deg impact separated the blade from the root. No local damage other than leading-edge debonding was observed for either blade. The results of a failure mode analysis are also discussed.

Bowles, K. J.↗

Interactive multi-mode blade impact analysis

This paper describes the theoretical methodology used in developing an analysis for the response of turbine engine fan blades subjected to soft body (bird) impacts and the computer program that was developed using this methodology as its basis. This computer program is an outgrowth of two programs that were previously developed for the purpose of studying problems of a similar nature (a three-mode beam impact analysis and a multi-mode beam impact analysis). The present program utilizes an improved missile model that is interactively coupled with blade motion which is more consistent with actual observations. It takes into account local deformation at the impact area, blade camber effects, and the spreading of the impacted missile mass on the blade surface. In addition, it accommodates plate-type mode shapes. The analysis capability in this computer program represents a significant improvement in the development of the methodology for evaluating potential fan blade materials and designs with regard to foreign object impact resistance.

Alexander, A.↗

Low-velocity impact tests on fibrous composite sandwich structures

The effect of low-velocity projectile impact on the load-carrying ability of the composite sandwich structural components is investigated experimentally, the impact simulating the damage caused by runway debris and the accidental dropping of hand tools during servicing on secondary aircraft structures made with composites. The sandwich-type beam specimens were fabricated with graphite/epoxy face sheets, aluminum honeycomb core, and a steel (back) plate. A four-point beam-loading apparatus was used, and the ultimate strength, ultimate strain, and residual strength of the composites were determined. A faired curve is presented indicating the lower bound of the failure threshold for each of the laminate configurations tested in compression and tension as a function of the projectile impact energy. It is shown that strength degradation due to impact is dependent on the laminate configuration and the fiber/matrix combination. The laminates having more angle plies near the impact surface and unidirectional plies elsewhere seem to show extensive interply and intraply fiber delaminations at failure relative to the laminates with a cross-ply on the impact surface.

Sharma, A. V.↗

Impact cratering experiments in Bingham materials and the morphology of craters on Mars and Ganymede

Results from a series of laboratory impacts into clay slurry targets are compared with photographs of impact craters on Mars and Ganymede. The interior and ejecta lobe morphology of rampart-type craters, as well as the progression of crater forms seen with increasing diameter on both Mars and Ganymede, are equalitatively explained by a model for impact into Bingham materials. For increasing impact energies and constant target rheology, laboratory craters exhibit a morphologic progression from bowl-shaped forms that are typical of dry planetary surfaces to craters with ejecta flow lobes and decreasing interior relief, characteristic of more volatile-rich planets. A similar sequence is seen for uniform impact energy in slurries of decreasing yield strength. The planetary progressions are explained by assuming that volatile-rich or icy planetary surfaces behave locally in the same way as Bingham materials and produce ejecta slurries with yield strenghs and viscosities comparable to terrestrial debris flows. Hypothetical impact into Mars and Ganymede are compared, and it is concluded that less ejecta would be produced on Ganymede owing to its lower gravitational acceleration, surface temperature, and density of surface materials.

Fink, J. H.↗