Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hypersonic flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Adaptive finite element analysis of hypersonic laminar flows for aerothermal load predictions

The use of an adaptive mesh refinement procedure for analyzing hypersonic laminar flows with application to aerothermal load predictions is described. The adaptation procedure, which uses both quadrilateral and triangular elements, is implemented with the multistep Galerkin-Runge-Kutta scheme. Elements that lie in regions of strong gradients are refined based on indicators to obtain better definition of flow features. The effectiveness of the adaptive procedure is demonstrated by modeling Mach 11.7 flow over a 15-deg ramp. Numerical results are compared with predictions of strong interaction theories and experimental data. Surface quantities such as heating rates and pressure loads, critical for the effective design of high-speed vehicles, are found to be in good agreement with experimental values.

Ramakrishnan, R.↗
NASA NTRS1974

Hot-wire anemometry in hypersonic helium flow

Hot-wire anemometry techniques are described that have been developed and used for hypersonic-helium-flow studies. The short run time available dictated certain innovations in applying conventional hot-wire techniques. Some examples are given to show the application of the techniques used. Modifications to conventional equipment are described, including probe modifications and probe heating controls.

Wagner, R. D.↗
NASA NTRS1991

Hypersonic rarefied flow about a delta wing - Direct simulation and comparison with experiment

Three-dimensional simulations of hypersonic rarefied flow about a delta wing are made using the direct simulation Monte Carlo (DSMC) method of Bird, and the results of the computations are compared with recent experimental data obtained in a vacuum wind tunnel at the DLR in Gottingen, Germany. The present study considers Mach 8.89 nitrogen flow for a range of conditions that include Knudsen numbers of 0.016 to 3.505 for an incidence angle of 30 deg, and angles of incidence of 15 to 60 deg for a constant Knudsen number of 0.389. The calculations provide details concerning the flowfield structure and surface quantities. Comparisons between the calculations and the available experimental measurements are made for aerodynamic and overall heat-transfer coefficients and recovery temperature. The agreement between the measured and calculated data are very good, well within the estimated measurement uncertainty. Comparisons are also made with modified Newtonian and free-molecule theories.

Celenligil, M. C.↗
NASA NTRS1989

A fast sorting algorithm for a hypersonic rarefied flow particle simulation on the connection machine

The data parallel implementation of a particle simulation for hypersonic rarefied flow described by Dagum associates a single parallel data element with each particle in the simulation. The simulated space is divided into discrete regions called cells containing a variable and constantly changing number of particles. The implementation requires a global sort of the parallel data elements so as to arrange them in an order that allows immediate access to the information associated with cells in the simulation. Described here is a very fast algorithm for performing the necessary ranking of the parallel data elements. The performance of the new algorithm is compared with that of the microcoded instruction for ranking on the Connection Machine.

Dagum, Leonardo↗
NASA NTRS1980

Hypersonic-helium-flow-field measurements with the resonant Doppler velocimeter

A low density of sodium atoms seeded into a hypersonic helium flow is used to quantitatively determine flow-field properties. By observing fluorescence from a point as a single-mode dye laser is tuned through the sodium D2 line, the absorption profile may be found. This profile is fitted to a properly weighted sum of Voigt functions to yield the velocity, temperature, and pressure at the observation point. The fluorescence is strong enough to use this technique for qualitative flow-field visualization.

Zimmermann, M.↗
NASA NTRS1991

Aerothermodynamics of a 1.6-m-diameter sphere in hypersonic rarefied flow

Results of a numerical study using the direct simulation Monte Carlo (DSMC) method are presented for hypersonic rarefied flow about a 1.6-m-diameter sphere. The flow conditions considered are those experienced by a typical satellite in orbit or by a space vehicle during entry. The altitude range considered is that from 90 to 200 km, which encompasses the near continuum, transitional and free-molecular flow regimes. A freestream velocity of 7.5 km/s is assumed in the simulations. The results show that transitional effects are significant at all altitudes below 200 km, but at 200 km the flow about the sphere attains the free-molecular limit. Very little chemical activity is present above 120 km. Both the stagnation point heat transfer and the sphere drag approach their respective free molecule values at 200 km. Results highlight the thermal and chemical nonequilibrium nature of the flowfield. Nonequilibrium effects on the surface heating and body drag are also investigated.

Dogra, Virendra K.↗
NASA NTRS1993

Three-dimensional hypersonic rarefied flow calculations using direct simulation Monte Carlo method

A summary of three-dimensional simulations on the hypersonic rarefied flows in an effort to understand the highly nonequilibrium flows about space vehicles entering the Earth's atmosphere for a realistic estimation of the aerothermal loads is presented. Calculations are performed using the direct simulation Monte Carlo method with a five-species reacting gas model, which accounts for rotational and vibrational internal energies. Results are obtained for the external flows about various bodies in the transitional flow regime. For the cases considered, convective heating, flowfield structure and overall aerodynamic coefficients are presented and comparisons are made with the available experimental data. The agreement between the calculated and measured results are very good.

Celenligil, M. Cevdet↗
NASA NTRS1958

The Prospects for Laminar Flow on Hypersonic Airplanes

The factors which affect the extent of laminar flow on airplanes for hypersonic flight are discussed on the basis of the available data. Factors considered include flight Reynolds number, surface roughness, angle of attack, angle of leading-edge sweepback, and aerodynamic interference. Test data are presented for one complete configuration.

MACH NUMBER EFFECTS - COMPLETE WINGS↗
NASA NTRS1992

Hypersonic rarefied flow past spheres including wake structure

Results of a numerical study using the direct simulation Monte Carlo method are presented for hypersonic rarefied flow past spheres. The flow conditions considered are those corresponding to low density wind tunnel test conditions. The set of the experimental conditions for the calculations encompasses the transitional to near-continuum flow regimes. Comparison of the calculated drag with experimental results shows good agreement to well within the experimental error. Particular attention is focused on the wake structure. Calculations show that the wake is very rarefied with considerable thermal nonequilibrium for all the cases considered. No flow separation is observed in the wake for the near-continuum case where a vortex has been predicted by Navier-Stokes type calculations.

Dogra, Virendra K.↗
NASA NTRS1989

Toward a CFD nose-to-tail capability - Hypersonic unsteady Navier-Stokes code validation

Computational fluid dynamics (CFD) research for hypersonic flows presents new problems in code validation because of the added complexity of the physical models. This paper surveys code validation procedures applicable to hypersonic flow models that include real gas effects. The current status of hypersonic CFD flow analysis is assessed with the Compressible Navier-Stokes (CNS) code as a case study. The methods of code validation discussed to beyond comparison with experimental data to include comparisons with other codes and formulations, component analyses, and estimation of numerical errors. Current results indicate that predicting hypersonic flows of perfect gases and equilibrium air are well in hand. Pressure, shock location, and integrated quantities are relatively easy to predict accurately, while surface quantities such as heat transfer are more sensitive to the solution procedure. Modeling transition to turbulence needs refinement, though preliminary results are promising.

Edwards, Thomas A.↗
NASA NTRS1988

Numerical simulation of hypersonic inlet flows with equilibrium or finite rate chemistry

An efficient numerical program incorporated with comprehensive high temperature gas property models has been developed to simulate hypersonic inlet flows. The computer program employs an implicit lower-upper time marching scheme to solve the two-dimensional Navier-Stokes equations with variable thermodynamic and transport properties. Both finite-rate and local-equilibrium approaches are adopted in the chemical reaction model for dissociation and ionization of the inlet air. In the finite rate approach, eleven species equations coupled with fluid dynamic equations are solved simultaneously. In the local-equilibrium approach, instead of solving species equations, an efficient chemical equilibrium package has been developed and incorporated into the flow code to obtain chemical compositions directly. Gas properties for the reaction products species are calculated by methods of statistical mechanics and fit to a polynomial form for C(p). In the present study, since the chemical reaction time is comparable to the flow residence time, the local-equilibrium model underpredicts the temperature in the shock layer. Significant differences of predicted chemical compositions in shock layer between finite rate and local-equilibrium approaches have been observed.

Yu, Sheng-Tao↗
NASA NTRS2014

Hypersonic Separated Flows About "Tick" Configurations With Sensitivity to Model Design

This paper presents computational results obtained by applying the direct simulation Monte Carlo (DSMC) method for hypersonic nonequilibrium flow about "tick-shaped" model configurations. These test models produces a complex flow where the nonequilibrium and rarefied aspects of the flow are initially enhanced as the flow passes over an expansion surface, and then the flow encounters a compression surface that can induce flow separation. The resulting flow is such that meaningful numerical simulations must have the capability to account for a significant range of rarefaction effects; hence the application of the DSMC method in the current study as the flow spans several flow regimes, including transitional, slip, and continuum. The current focus is to examine the sensitivity of both the model surface response (heating, friction and pressure) and flowfield structure to assumptions regarding surface boundary conditions and more extensively the impact of model design as influenced by leading edge configuration as well as the geometrical features of the expansion and compression surfaces. Numerical results indicate a strong sensitivity to both the extent of the leading edge sharpness and the magnitude of the leading edge bevel angle. Also, the length of the expansion surface for a fixed compression surface has a significant impact on the extent of separated flow.

Moss, J. N.↗
NASA NTRS1991

Application of a parallel DSMC method to hypersonic rarefied flows

This paper describes a method for doing direct simulation Monte Carlo (DSMC) calculations using parallel processing and presents some results of applying the method to several hypersonic, rarefied flow problems. The performance and efficiency of the parallel method are discussed. The applications described are the flow in a channel and the flow about a flat plate at incidence. The results show significant advantages of parallel processing over conventional scalar processing and demonstrate the scalability of the method to large problems.

Wilmoth, Richard G.↗
NASA NTRS1995

Numerical simulation of supersonic and hypersonic inlet flow fields

This report summarizes the research performed by North Carolina State University and NASA Ames Research Center under Cooperative Agreement NCA2-719, 'Numerical Simulation of Supersonic and Hypersonic Inlet Flow Fields". Four distinct rotated upwind schemes were developed and investigated to determine accuracy and practicality. The scheme found to have the best combination of attributes, including reduction to grid alignment with no rotation, was the cell centered non-orthogonal (CCNO) scheme. In 2D, the CCNO scheme improved rotation when flux interpolation was extended to second order. In 3D, improvements were less dramatic in all cases, with second order flux interpolation showing the least improvement over grid aligned upwinding. The reduction in improvement is attributed to uncertainty in determining optimum rotation angle and difficulty in performing accurate and efficient interpolation of the angle in 3D. The CCNO rotational technique will prove very useful for increasing accuracy when second order interpolation is not appropriate and will materially improve inlet flow solutions.

Mcrae, D. Scott↗
NASA NTRS1994

Preconditioned conjugate gradient methods for the Navier-Stokes equations

A preconditioned Krylov subspace method (GMRES) is used to solve the linear systems of equations formed at each time-integration step of the unsteady, two-dimensional, compressible Navier-Stokes equations of fluid flow. The Navier-Stokes equations are cast in an implicit, upwind finite-volume, flux-split formulation. Several preconditioning techniques are investigated to enhance the efficiency and convergence rate of the implicit solver based on the GMRES algorithm. The superiority of the new solver is established by comparisons with a conventional implicit solver, namely line Gauss-Seidel relaxation (LGSR). Computational test results for low-speed (incompressible flow over a backward-facing step at Mach 0.1), transonic flow (trailing edge flow in a transonic turbine cascade), and hypersonic flow (shock-on-shock interactions on a cylindrical leading edge at Mach 6.0) are presented. For the Mach 0.1 case, overall speedup factors of up to 17 (in terms of time-steps) and 15 (in terms of CPU time on a CRAY-YMP/8) are found in favor of the preconditioned GMRES solver, when compared with the LGSR solver. The corresponding speedup factors for the transonic flow case are 17 and 23, respectively. The hypersonic flow case shows slightly lower speedup factors of 9 and 13, respectively. The study of preconditioners conducted in this research reveals that a new LUSGS-type preconditioner is much more efficient than a conventional incomplete LU-type preconditioner.

Ajmani, Kumud↗