Reconciling ionization energies and band gaps of warm dense matter derived with ab initio simulations and average atom models
Not Available
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
SEARCH · Engineering Papers
Results for “hot plasma”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Impact of strong magnetization in cylindrical plasma implosions with applied B-field measured via x-ray emission spectroscopy
Magnetization is a key strategy for enhancing inertial fusion performance, though accurate characterization of magnetized dense plasmas is needed for a better comprehension of the underlying physics. Measured spectra from imploding Ar-doped D 2 -filled cylinders at the OMEGA laser show distinctive features with and without an imposed magnetic field. A multizone spectroscopic diagnosis leads to quantitative estimates of the plasma conditions, namely revealing a 50% core temperature rise at half mass density when a 30-T seed field is applied. Concurrently, experimental spectra align well with predictions from extended-magnetohydrodynamics simulations, providing strong evidence that the attained core conditions at peak compression are consistent with the impact of a 10-kT compressed field. These results pave the way for the validation of magnetized transport models in dense plasmas and for future magnetized laser implosion experiments at a larger scale. Published by the American Physical Society 2024
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
High-frequency waves in a collisional plasma with magnetic field.
Electron-plasma oscillation damping in hot collisional plasma with external uniform magnetic field investigated using Fokker-Planck equation
MAGNETOPLASMA↗
Localized mix-induced radiative cooling in a capsule implosion at the National Ignition Facility
In this work, w present direct measurements of electron temperature variations within an inertially confined deuterium-tritium plasma caused by localized mix of higher-Z materials into the central hot spot. The data are derived from newly developed differentially filtered penumbral imaging of the bremsstrahlung continuum emission. Our analysis reveals distinct localized emitting features in the stagnated hot-spot plasma, and we infer spatial variations in the electron temperature: the mixed region is 660±130eV colder than the surrounding hot-spot plasma at 3.26±0.11keV. Our analysis of the energy flow shows that we measure approximately steady-state conditions where the radiative losses in the mix region are balanced by heat conduction from the surrounding hot deuterium-tritium plasma.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Review of Solid State Consolidation Processing Techniques of ODS Steels (Hot Extrusion, Hot Isostatic Pressing, Spark Plasma Sintering, and Stir Friction Consolidation): Resulting Microstructures and Mechanical Properties
This paper reviews the solid-state consolidation processing techniques for Oxide Dispersion Strengthened steels and compares them in terms of the resulting microstructure and reported mechanical properties. Synthesis techniques include hot extrusion, hot isostatic pressing, spark plasma sintering and friction consolidation. The effects of process parameters on the resulting microstructures and performance are discussed for each technique. Average oxide size, average grain size, and porosity are compared across techniques, as well as mechanical strength and ductility. Across consolidation techniques where temperature can be controlled, a low sintering temperature with a high sintering pressure is favorable for keeping oxide sizes, grain sizes, and porosity low. The use of yttrium and titanium for oxide formation has been evidenced to reduce oxide sizes, and tungsten additions have been shown to improve strength. Current literature suggests that the more mature hot extrusion technique produces stronger steel with consistently fine oxides, while other alternative solid-state consolidation, while promising, offer margin for improvement.
36 MATERIALS SCIENCE↗
Force balance in the magnetospheres of Jupiter and Saturn
Spacecraft measurements of the plasma populations and magnetic fields near Jupiter and Saturn have revealed that large magnetospheres surround both planets. Magnetic field measurements have indicated closed field line topologies in the dayside magnetospheres of both planets while plasma instruments have shown these regions to be populated by both hot and cold plasma components convected azimuthally in the sense of planetary rotation. By using published data from the Voyager Plasma Science (PLS), Low Energy Charged Particle (LECP), and Magnetometer (MAG) instruments, it is possible to investigate the validity of the time stationary MHD momentum equation in the middle magnetospheres of Jupiter and Saturn. At Saturn, the hot plasma population is negligible in the dynamic sense and the centrifugal force of the cold rotating plasma appears to balance the Lorentz force. At Jupiter, the centrifugal force balances about 25 percent of the Lorentz force. The remaining inward Lorentz force is balanced by pessure gradients in the hot, high-beta plasma of the Jovian magnetodisk.
Mcnutt, R. L., Jr.↗
VERITAS : A density-functional theory-based multiband kinetic model for understanding x-ray spectroscopy of dense plasmas
X-ray spectroscopy has long been a powerful diagnostic tool for hot, dilute plasmas, providing insights into plasma conditions by measuring line shifts and broadenings of atomic transitions. The technique critically depends on the accuracy of atomic physics models used to interpret spectroscopic measurements for inferring plasma properties such as free-electron density and temperature. Over the past decades, the atomic and plasma physics communities have developed robust atomic physics models to account for various processes in hot, dilute classical plasmas. While these models have been successful in that regime, their applicability becomes uncertain when interpreting x-ray spectroscopy experiments of above-solid-density plasmas. Given that finite-temperature density-functional theory (DFT) offers a more accurate description of dense plasma environments, we present the development of a DFT-based multi-band kinetic model, VERITAS, designed to improve the interpretation of x-ray spectroscopic measurements in high-density plasmas produced by laser-driven spherical implosions. This work details the VERITAS model and its application to both time-integrated and time-resolved x-ray spectra from implosion experiments on OMEGA. The advantages and limitations of the VERITAS model will also be discussed, along with potential directions for advancing x-ray spectroscopy of dense and superdense plasmas.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Approximations to the plasma dispersion function
Linear wave propagation in hot collisionless plasmas is described by the linearized Vlasov and Maxwell equations. In uniform media, the utilization of spatial and temporal transforms of those equations leads to the consideration of integrals of the Hilbert transform type. Analysis and comparison of two simple approximations are provided based on the utilization of resonance velocity distributions. Application is then made to the Landau and whistler waves, along with a discussion of the results, and commentary on possible improvements.
Brinca, A. L.↗
The lower hybrid density drift instability with cold plasma
The linear Vlasov dispersion relation for the lower hybrid density drift instability is studied in a four component (hot electrons and protons, cold electrons and protons) plasma. The introduction of a cold ion population monotonically reduces the maximum growth rate of the instability. Reduction of the ratio of temperatures of the cold and hot plasmas reduces both the real frequency and the growth rate of the instability. Near a ratio of the cold and hot plasma temperatures of 0.01 a higher frequency branch of this instability emerges and for a fixed ratio of cold and hot electron density exhibits an increasing maximum growth rate as the ratio of the cold and hot plasma temperatures decreases further. The ratio of the cold and hot plasma temperatures for the ions is the crucial parameter and deserves detailed magnetospheric studies.
Gary, S. P.↗
Electromagnetic wave scattering from a magnetically confined high-temperature plasma
Electromagnetic wave scattering from charged particle in hot electron plasma in magnetic field, considering relativistic corrections for scattered radiation spectra
Nee, S. F.↗
The Voyager 1 EUV spectrum of the Io plasma torus
The Voyager 1 EUV spectrum of the hot Io plasma torus obtained before encounter in 1979 at a range of 4,800,000 km is analyzed in terms of a collisional model with improved collision strengths. Model calculations are based entirely on steady-state equilibrium between electron excitation-deactivation and radiative decay in the subspecies structure, and plasma temperature and species number densities are derived by fitting model spectra to the observations. Lines of S II, S III, S IV, O II, and O III are found to be dominant in the plasma torus, at torus half width densities of 44, 160, 220, 50, and 340/cu cm, respectively, and lines of S V and K III may also be present. An effective electron temperature of 80,000 K is estimated for the central dense region near 6 Jupiter radii. Model calculations are in substantial agreement with other spectroscopic observations of the hot torus; however, the observations exhibit strong morphological differences with recent ground-based observations of S II emission, and calculated ion densities differ from in situ Voyager 1 plasma science measurements.
Shemansky, D. E.↗
Scrape-off layer stability, turbulence and transport in MAST-U (Final Report)
U.S. Department of Energy (DOE) supported work at Lodestar Research Corporation under grant DE-SC0019270 is summarized in this final report. The research conducted under this grant explored the properties of the edge plasma in spherical torus magnetic fusion devices. Harnessing the energy that is released in fusion reactions would provide a safe and abundant source of power to meet the growing energy needs of the world population. The edge and scrape-off layer (SOL) region of fusion plasmas is the region where the hot core plasma transitions to a cooler surrounding boundary plasma. The properties of this boundary plasma determine how interactions with material surfaces will impact both the overall device performance and the lifetime of crucial components such as the walls of the device chamber and other hardware. The research carried out studied filamentary plasma instabilities and turbulent transport in the edge and SOL of the MAST U spherical torus.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Independent-hot-spot approach to multibeam laser-plasma instabilities
The independent-hot-spot model is used to develop an analytic formulation for multibeam laser-plasma instabilities in inhomogeneous plasmas. The model is applied to the absolute two-plasmon-decay instability and shows good agreement with simulations and experiments. Furthermore, the success of the model indicates the emergence of single-speckle behavior for sufficiently large speckles sizes.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
A note on efficiently generating ionic configurations for opacity calculations
When calculating the spectral opacity of hot dense plasmas one often encounters the need to generate a list of detailed ionic configurations of bound states for each ion stage in the plasma. Here we present here a non-recursive algorithm for the efficient construction of such a list of states.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Inertial Confinement Fusion—Experimental Physics: Laser Drive
Laser-driven inertial confinement fusion creates a central hot-spot plasma by irradiating a spherical target containing a thermonuclear fuel layer of deuterium (D) and tritium (T) with temporally-shaped, high-intensity lasers or X rays. Inertial confinement fusion relies on the DT-fusion alpha particles depositing their energy in a hot-spot plasma, causing its temperature to rise sharply and a thermonuclear burn wave to propagate out through the surrounding cold, dense DT fuel, producing significantly more energy than was used to heat and compress the fuel. Alpha heating has been demonstrated and burning plasma (i.e., yield amplification due to alpha heating >3.5) is being explored with megajoule-scale lasers on the path to ignition (i.e., yield amplification due to alpha heating >20)
alpha particles↗
Can a Penning ionization discharge simulate the tokamak scrape-off plasma conditions?
The tokamak scrape-off (the region between the vacuum vessel wall and the magnetically confined fusion plasma edge), represents a source/sink for the hot fusion plasma. The electron densities and temperatures are in the ranges 10 to the 11th - 10 to the 13th/cu cm and 1-40 eV, respectively (depending on the size, magnetic field intensity and configuration, plasma current, etc). In the work reported, the electron temperature and density have been estimated in a Penning ionization discharge by comparing its spectroscopic emission in the VUV with that predicted by a collisional radiative model. An attempt to directly compare this emission with that of the tokamak edge is briefly described.
Finkenthal, M.↗
The generation of electrostatic noise in the plasma sheet boundary layer
The one and two ion beam instability is considered as a possible explanation for the observations of broadband electrostatic noise in the plasma sheet region of the geomagnetic tail. When only hot streaming plasma sheet boundary layer ions are present, no broadband waves are excited. Cold, streaming ionospheric ions can generate electrostatic broadband waves propagating in the slow beam acoustic mode, but the growth rates of the waves are significantly enhanced when hot boundary layer ions are present. (Both the slow and fast beam acoustic modes can be excited, depending on the relative ion drift.) This model predicts that the wave intensity of the broad band noise should peak in the plasma sheet boundary layer. Observations of less intense electrostatic waves in the lobes and plasma sheet are likely a result of the absence of hot ion beams or large ion temperatures, respectively, which result in smaller growth rates. The ion beam instability may play an important role in the formation of the central plasma sheet.
Dusenbery, P. B.↗
Ion composition measurement techniques for space plasmas
Plasmas found in space range from the solar wind with a typical temperature of 100,000-1,000,000 K, about 400 km/s bulk flow speed, and high ionization (charge states) of ions, to the hot, slowly moving plasmas in the outer magnetospheres of the giant planets, to the cold, corotating plasmas in inner magnetospheres. Space plasma instruments and techniques are reviewed, with an emphasis on hot plasma composition measurements. Starting with Faraday Cup detectors some 30 years ago, plasma instruments have evolved to the present time-of-flight systems with excellent mass resolution and three-dimensional viewing capabilities.
Gloeckler, George↗