Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hexagonal boron nitride”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Anomalous thickness-dependent electrical conductivity in van der Waals layered transition metal halide, Nb 3 Cl 8

Understanding the electronic transport properties of layered, van der Waals transition metal halides (TMHs) and chalcogenides is a highly active research topic today. Of particular interest is the evolution of those properties with changing thickness as the 2D limit is approached. Here, we present the electrical conductivity of exfoliated single crystals of the TMH, cluster magnet, Nb 3 Cl 8 , over a wide range of thicknesses both with and without hexagonal boron nitride (hBN) encapsulation. The conductivity is found to increase by more than three orders of magnitude when the thickness is decreased from 280 µm to 5 nm, at 300 K. At low temperatures and below ~50 nm, the conductance becomes thickness independent, implying surface conduction is dominating. Temperature dependent conductivity measurements indicate Nb 3 Cl 8 is an insulator, however, the effective activation energy decreases from a bulk value of 310 meV to 140 meV by 5 nm. X-ray photoelectron spectroscopy (XPS) shows mild surface oxidation in devices without hBN capping, however, no significant difference in transport is observed when compared to the capped devices, implying the thickness dependent transport behavior is intrinsic to the material. A conduction mechanism comprised of a higher conductivity surface channel in parallel with a lower conductivity interlayer channel is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanical, electronic, optical, piezoelectric and ferroic properties of strained graphene and other strained monolayers and multilayers: an update

Abstract This is an update of a previous review (Naumis et al 2017 Rep. Prog. Phys. 80 096501). Experimental and theoretical advances for straining graphene and other metallic, insulating, ferroelectric, ferroelastic, ferromagnetic and multiferroic 2D materials were considered. We surveyed (i) methods to induce valley and sublattice polarisation ( P ) in graphene, (ii) time-dependent strain and its impact on graphene’s electronic properties, (iii) the role of local and global strain on superconductivity and other highly correlated and/or topological phases of graphene, (iv) inducing polarisation P on hexagonal boron nitride monolayers via strain, (v) modifying the optoelectronic properties of transition metal dichalcogenide monolayers through strain, (vi) ferroic 2D materials with intrinsic elastic ( σ ), electric ( P ) and magnetic ( M ) polarisation under strain, as well as incipient 2D multiferroics and (vii) moiré bilayers exhibiting flat electronic bands and exotic quantum phase diagrams, and other bilayer or few-layer systems exhibiting ferroic orders tunable by rotations and shear strain. The update features the experimental realisations of a tunable two-dimensional Quantum Spin Hall effect in germanene, of elemental 2D ferroelectric bismuth, and 2D multiferroic NiI 2 . The document was structured for a discussion of effects taking place in monolayers first, followed by discussions concerning bilayers and few-layers, and it represents an up-to-date overview of exciting and newest developments on the fast-paced field of 2D materials.

Physics↗

Approaching the intrinsic photoluminescence linewidth in transition metal dichalcogenide monolayers

Excitonic states in monolayer transition metal dichalcogenides (TMDCs) have been the subject of extensive recent interest. Their intrinsic properties can, however, be obscured due to the influence of inhomogeneity in the external environment. Here we report methods for fabricating high quality TMDC monolayers with narrow photoluminescence (PL) linewidth approaching the intrinsic limit. We find that encapsulation in hexagonal boron nitride (h-BN) sharply reduces the PL linewidth, and that passivation of the oxide substrate by an alkyl monolayer further decreases the linewidth and also minimizes the charged exciton (trion) peak. The combination of these sample preparation methods results in much reduced spatial variation in the PL emission, with a full-width-at-half-maximum as low as 1.7 meV. Furthermore, analysis of the PL line shape yields a homogeneous width of 1.43 ± 0.08 meV and inhomogeneous broadening of 1.1 ± 0.3 meV.

36 MATERIALS SCIENCE↗

Electrostatic imaging of encapsulated graphene

Devices made from two-dimensional (2D) materials such as graphene and transition metal dichalcogenides exhibit remarkable electronic properties of interest to many subdisciplines of nanoscience. Owing to their 2D nature, their quality is highly susceptible to contamination and degradation when exposed to the ambient environment. Protecting the 2D layers by encapsulation between hexagonal boron nitride (hBN) layers significantly improves their quality. Locating these samples within the encapsulant and assessing their integrity prior to further processing then becomes challenging. Here we show that conductive scanning probe techniques such as electrostatic force and Kelvin force microscopy make it possible to visualize the encapsulated layers, their charge environment and local defects on the sub-micrometer scale. Our techniques are employed without requiring electrical contact to the embedded layer, providing valuable feedback on the device's local electronic quality prior to any device etching or electrode deposition. We show that these measurement modes, which are simple extensions of atomic force microscopy, are perfectly suited for imaging encapsulated conductors and their local charge environments.

36 MATERIALS SCIENCE↗

Magnetic field mixing and splitting of bright and dark excitons in monolayer MoSe 2

Monolayers of semiconducting transition metal dichalcogenides (TMDCs) with unique spin-valley contrasting properties and remarkably strong excitonic effects continue to be a subject of intense research interests. These model 2D semiconductors feature two fundamental intravalley excitons species - optically accessible ' bright' excitons with anti-parallel spins and optically inactive 'dark' excitons with parallel spins. For applications exploiting radiative recombination of bright excitons or long lifetime dark excitons, it is essential to understand the radiative character of the exciton ground state and establish the energy separation between the lowest energy bright and dark excitons. Herein, we report a direct spectroscopic measure of dark excitons in monolayer MoSe 2 encapsulated in hexagonal boron nitride. By applying strong in-plane magnetic field, we induce mixing and splitting of bright and dark exciton branches, which enables an accurate spectroscopic determination of their energies. We confirm the bright character of the exciton ground state separated by a 1.5 meV gap from the higher energy dark exciton state, much smaller compared to the previous theoretical expectations. These results offer critical information for further improvement of the accurate theoretical description of TMDCs electronic structure.

molybdenum diselenide↗

Strongly adhesive dry transfer technique for van der Waals heterostructure

That one can stack van der Waals materials with atomically sharp interfaces has provided a new material platform of constructing heterostructures. The technical challenge of mechanical stacking is picking up the exfoliated atomically thin materials after mechanical exfoliation without chemical and mechanical degradation. Chemically inert hexagonal boron nitride (hBN) has been widely used for encapsulating and picking up vdW materials. However, due to the relatively weak adhesion of hBN, assembling vdW heterostructures based on hBN has been limited. Here, we report a new dry transfer technique. We used two vdW semiconductors (ZnPS 3 and CrPS 4 ) to pick up and encapsulate layers for vdW heterostructures, which otherwise are known to be hard to fabricate. By combining with optimized polycaprolactone (PCL) providing strong adhesion, we demonstrated various vertical heterostructure devices, including quasi-2D superconducting NbSe 2 Josephson junctions with atomically clean interface. The versatility of the PCL-based vdW stacking method provides a new route for assembling complex 2D vdW materials without interfacial degradation.

36 MATERIALS SCIENCE↗

A multiscale insight into the growth of h-BN: effect of the enclosure

Abstract There is a lack of knowledge on the fundamental growth mechanisms governing the characteristics of 2D materials synthesized by the chemical vapor deposition (CVD) technique and their correlation with experimentally controllable parameters, which hindered their wafer-scale synthesis. Here, we pursued an analytical and computational approach to access the system states that are not experimentally viable to address these critical needs. We developed a multiscale computational framework correlating the macroscale heat and mass flow with the mesoscale morphology of the as-grown 2D materials by solving the coupled system of heat/mass transfer and phase-field equations. We used hexagonal boron nitride (h-BN) as our model material and investigated the effect of substrate enclosure on its growth kinetics and final morphology. We revealed a lower concentration with a more uniform distribution on the substrate in an enclosed-growth than open-growth. It leads to a more uniform size distribution of the h-BN islands, consistent with existing experimental investigations.

Materials Science↗

The role of substrate on stabilizing new phases of two-dimensional tin

In this work, we investigate the role of substrates in determining the morphologies and electronic structures of two-dimensional (2D) Sn. Here, we use Ir(111) and 2D hexagonal boron nitride (h-BN) predeposited on Ir(111) as substrates. The latter contains Moiré patterns with varying binding strength between h-BN and metal. Using scanning tunneling microscopy and first-principles calculations, we reveal the distinct morphologies of 2D Sn on different substrates. Of particular interest, we discover a new √7 × √7 Sn phase, originating from the local charge transfer with metal beneath the “decoupling” h-BN monolayer at the strongly interacting Moiré region. To the best of our knowledge, this work demonstrates, for the first time via combined experimental and theoretical approach, that new 2D Sn phases can be achieved using Moiré patterns on h-BN/metal. This finding should be instrumental in the development of 2D-based topological materials.

36 MATERIALS SCIENCE↗

Thickness-dependent phase transition kinetics in lithium-intercalated MoS 2

The phase transitions of two-dimensional (2D) materials are key to the operation of many devices with applications including energy storage and low power electronics. Nanoscale confinement in the form of reduced thickness can modulate the phase transitions of 2D materials both in their thermodynamics and kinetics. Here, using in situ Raman spectroscopy we demonstrate that reducing the thickness of MoS 2 below five layers slows the kinetics of the phase transition from 2H- to 1T'-MoS 2 induced by the electrochemical intercalation of lithium. In this study, we observe that the growth rate of 1T' domains is suppressed in thin MoS 2 supported by SiO 2 , and attribute this growth suppression to increased interfacial effects as the thickness is reduced below 5 nm. In this study, the suppressed kinetics can be reversed by placing MoS 2 on a 2D hexagonal boron nitride ( h BN) support, which readily facilitates the release of strain induced by the phase transition. Additionally, we show that the irreversible conversion of intercalated 1T'-MoS 2 into Li2S and Mo is also thickness-dependent and the stability of 1T'-MoS 2 is significantly increased below five layers, requiring a much higher applied electrochemical potential to break down 1T'-MoS 2 into Li 2 S and Mo nanoclusters.

36 MATERIALS SCIENCE↗

Observation of well-defined Kohn-anomaly in high-quality graphene devices at room temperature

Abstract Due to its ultra-thin nature, the study of graphene quantum optoelectronics, like gate-dependent graphene Raman properties, is obscured by interactions with substrates and surroundings. For instance, the use of doped silicon with a capping thermal oxide layer limited the observation to low temperatures of a well-defined Kohn-anomaly behavior, related to the breakdown of the adiabatic Born–Oppenheimer approximation. Here, we design an optoelectronic device consisting of single-layer graphene electrically contacted with thin graphite leads, seated on an atomically flat hexagonal boron nitride substrate and gated with an ultra-thin gold layer. We show that this device is optically transparent, has no background optical peaks and photoluminescence from the device components, and no generation of laser-induced electrostatic doping (photodoping). This allows for room-temperature gate-dependent Raman spectroscopy effects that have only been observed at cryogenic temperatures so far, above all the Kohn-anomaly phonon energy normalization. The new device architecture, by decoupling graphene optoelectronic properties from the substrate effects, allows for observing quantum phenomena at room temperature.

Materials Science↗

Effect of environmental screening and strain on optoelectronic properties of two-dimensional quantum defects

Point defects in hexagonal boron nitride (hBN) are promising candidates as single-photon emitters (SPEs) in nanophotonics and quantum information applications. The precise control of SPEs requires in-depth understanding of their optoelectronic properties. However, how the surrounding environment of host materials, including the number of layers, substrates, and strain, influences SPEs has not been fully understood. Here, in this work, we study the dielectric screening effect due to the number of layers and substrates, and the strain effect on the optical properties of carbon dimer and nitrogen vacancy defects in hBN from first-principles many-body perturbation theory. We report that environmental screening causes a lowering of the quasiparticle gap and exciton binding energy, leading to nearly constant optical excitation energy and exciton radiative lifetime. We explain the results with an analytical model starting from the Bethe–Salpeter equation Hamiltonian with Wannier basis. We also show that optical properties of quantum defects are largely tunable by strain with highly anisotropic response, in good agreement with experimental measurements. Our work clarifies the effect of environmental screening and strain on optoelectronic properties of quantum defects in two-dimensional insulators, facilitating future applications of SPEs and spin qubits in low-dimensional systems.

36 MATERIALS SCIENCE↗

Generation of out-of-plane ferroelectric behavior in a one-atom-thick monolayer

Ferroelectricity with out-of-plane polarization has so far been found in several two-dimensional (2D) materials, including monolayers comprising three to five planes of atoms, e.g. α-In 2 Se 3 and MoTe 2 . Here, we explore the generation of out-of-plane polarization within a one-atom-thick monolayer material, namely hexagonal boron nitride. We performed density-functional-theory calculations to explore inducing ferroelectric-like distortions through incorporation of isovalent substitutional impurities that are larger than the host atoms. This disparity in bond lengths causes a buckling of the h-BN, either up or down, which amounts to a dipole with two equivalent energies and opposing orientations. We tested several impurities to explore the magnitude of the induced dipole and the switching energy barrier for dipole inversion. The effects of strain, dipole–dipole interactions, and vertical heterostructures with graphene are further explored. Our results suggest a highly-tunable system with ground state antiferroelectricity and metastable ferroelectricity. Finally, we expect that this work will help foster new ways to include functionality in layered 2D-material-based applications.

36 MATERIALS SCIENCE↗

Restoration of weak localization in bilayer graphene by a molecular thin film

Quantum coherent effects can be probed in multilayer graphene through electronic transport measurements at low temperatures. In particular, bilayer graphene (BLG) is known to be susceptible to quantum interference corrections of the conductivity, presenting weak localization at all electronic densities, and dependent on different scattering mechanisms such as those related to the trigonal warping of the electron dispersion near the K and K′ valleys. Proximity effects with a molecular thin film influence these scattering mechanisms, which can be quantified through the known theory of magnetoconductance for BLG. Here, we present electronic transport measurements in a copper-phthalocyanine (CuPc) / BLG / hexagonal boron nitride (h-BN) heterostructure that suggest the restoration of weak localization in BLG, associated to a reduction of trigonal warping effects, that are known to suppress weak localization in BLG. Additionally, we observe a charge transfer of 3.6×10 12 cm −2 from the BLG to the molecules, as well as a very small degradation of the mobility of the BLG/h-BN heterostructure upon the deposition of CuPc. The molecular arrangement of the CuPc thin film is characterized in a control sample through transmission electron microscopy, that we relate to the electronic transport results.

bilayer graphene↗

Few-mode and anisotropic quantum transport in InSb nanoribbons using an all-van der Waals material-based gate

High-quality electrostatic gating is a fundamental ingredient for successful semiconducting device physics, and a key element of realizing clean quantum transport. Inspired by the widespread improvement of transport quality when two-dimensional van der Waals (vdW) materials are gated exclusively by other vdW materials, we have developed a method for gating non-vdW materials with an all-vdW gate stack, consisting of a hexagonal boron nitride dielectric layer and a few-layer graphite gate electrode. We demonstrate this gating approach on MOVPE-grown InSb nanoribbons (NRs), a novel variant of the InSb nanowire, with a flattened cross-section. In our all-vdW gated NR devices we observe conductance features that are reproducible and have low- to near-zero gate hysteresis. We also report quantized conductance, which persists to lower magnetic fields and longer channel lengths than typical InSb nanowire devices reported to date. Additionally, we observe level splitting that is highly anisotropic in an applied magnetic field, which we attribute to the ribbon cross-section. The performance of our devices is consistent with the reduced disorder expected from the all-vdW gating scheme, and marks the first report of ballistic, few-modes quantum transport in a non-vdW material with an all-vdW gate. Our results establish all-vdW gating as a promising approach for high-quality gating of non-vdW materials for quantum transport, which is in principle applicable generically, beyond InSb systems. In addition, the work showcases the specific potential of all-vdW gate/InSb NR devices for enabling clean quantum devices that may be relevant for spintronics and topological superconductivity studies.

InSb↗

Neutral but Impactful: Gallium Cluster-Induced Nanopores from Beam-Blanked Gallium Ion Sources

Neutral atoms originating from liquid metal ion sources are an often-overlooked source of contamination and damage in focused ion beam microscopy. Beyond ions and single atoms, these sources also generate atom clusters. While most studies have investigated charged clusters, here we demonstrate that neutral clusters are also formed. These neutral clusters bypass the electrostatic beam blanking system, allowing them to impinge on samples even when the ion beam is blanked. We investigate this phenomenon using thin (≤20 nm) freestanding membranes of hexagonal boron nitride, silicon, and silicon nitride as targets. Randomly dispersed nanopores that form upon neutral cluster exposure are revealed. The average nanopore diameter is ∼2 nm with a narrow size distribution, suggesting that the atom clusters have a preferred size. Various electron microscopy techniques are used to characterize the nanopores, including high-resolution transmission electron microscopy, multislice ptychography, and electron energy-loss spectroscopy. Finally, we show how electron irradiation in the transmission electron microscope can be used to both remove any amorphous material that may clog the pores and to controllably grow the pores to specific sizes. Tunable nanopores such as these are interesting for nanofluidic applications requiring size-selective membranes.

Byrne, Dana O↗

Interlayer Exciton Condensates between Second Landau Level Orbitals in Double Bilayer Graphene

Here, we present Coulomb-drag measurements on a heterostructure comprising two Bernal-stacked bilayer graphene (BLG) sheets separated by a 2.5 nm hexagonal boron nitride (hBN) spacer in the quantum Hall (QH) regime. Using top and bottom gate control, together with an interlayer bias, we independently tune the two BLG layers into either the lowest (N = 0) or second (N = 1) Landau level (LL) orbital and probe their interlayer QH states. When both layers occupy the N = 0 orbital, we observe both interlayer exciton condensates (ECs) at integer total filling and interlayer fractional QH states, echoing the results in double monolayer graphene. In contrast to previous studies, however, when both BLG layers occupy the N = 1 orbital, we also observe quantized drag signals, signifying an interlayer exciton condensate formed between the second LLs. By tuning the layer degree of freedom, we find that this N = 1 EC state arises only when the N = 1 wave function in each BLG is polarized toward the hBN interface to maximize the interlayer Coulomb interaction.

Electrical conductivity↗

Metastable piezoelectric group-IV monochalcogenide monolayers with a buckled honeycomb structure

Multiple two-dimensional materials are being naïvely termed stable on the grounds of displaying phonon dispersions with no negative frequencies and of not collapsing on molecular dynamics calculations at fixed volume. But, if these phases do not possess the smallest possible structural energy, how does one understand and establish their actual meta stability? To answer this question, twelve two-dimensional group-IV monochalcogenide monolayers (SiS, SiSe, SiTe, GeS, GeSe, GeTe, SnS, SnSe, SnTe, PbS, PbSe, and PbTe) with a buckled honeycomb atomistic structure—belonging to symmetry group P3m1—displaying an out-of-plane intrinsic electric polarization are shown to be metastable by three independent methods. First, we uncover a coordination-preserving structural transformation from the low-buckled honeycomb structure onto the lower-energy Pnm2 1 (or Pmmn for PbS, PbSe, and PbTe) phase to estimate energy barriers E B that must be overcome during such structural transformation. Using the curvature of the local minima and E B as inputs to Kramers escape formula, large escape times are found, implying the structural metastability of the buckled honeycomb phase (with the exception of PbS and PbSe, these phases display escape times ranging from 700 years to multiple times the age of the universe and can be considered “stable” for practical purposes in that relative sense). The second demonstration is provided by phonon dispersion relations that include the effect of long-range Coulomb forces and display no negative vibrational modes. The third and final demonstration of structural metastability is furnished by room-temperature ab initio molecular dynamics for selected compounds. Here, the magnitude of the electronic band gap evolves with chemical composition. Different from other binary two-dimensional compounds such as transition metal dichalcogenide monolayers and hexagonal boron nitride monolayers which only develop an in-plane piezoelectric response, the twelve group-IV monochalcogenide monolayers with a buckled honeycomb structure also display out-of-plane piezoelectric properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Probing nanoparticle substrate interactions with synchrotron infrared nanospectroscopy: Coupling gold nanorod Fabry-Pérot resonances with SiO 2 and $h$-BN phonons

Spectroscopic interrogation of materials in the midinfrared with nanometer spatial resolution is inherently difficult due to the long wavelengths involved, reduced detector efficiencies, and limited availability of spectrally bright, coherent light sources. Technological advances are driving techniques that overcome these challenges, enabling material characterization in this relatively unexplored spectral regime. Synchrotron infrared nanospectroscopy (SINS) is an imaging technique that provides local sample information of nanoscale target specimens in an experimental energy window between 330 and 5000 cm -1 . Here, using SINS, we analyzed a series of individual gold nanorods patterned on a SiO 2 substrate and on a flake of hexagonal boron nitride. The SINS spectra reveal interactions between the nanorod photonic Fabry-Pérot resonances and the surface phonon polaritons of each substrate, which are characterized as avoided crossings. A coupled oscillator model of the hybrid system provides a deeper understanding of the coupling and provides a theoretical framework for future exploration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗