Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “grade”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Sub‐0.6 eV Inverted Metamorphic GaInAs Cells Grown on Inp and GaAs Substrates for Thermophotovoltaics and Laser Power Conversion

Abstract Inverted metamorphic Ga 0.3 In 0.7 As photovoltaic converters with sub‐0.60 eV bandgaps grown on InP and GaAs are presented. Threading dislocation densities are 1.3 ± 0.6 × 10 6 and 8.9 ± 1.7 × 10 6 cm −2 on InP and GaAs, respectively. The devices generate open‐circuit voltages of 0.386 and 0.383 V, respectively, under irradiance producing a short‐circuit current density of ≈10 A cm −2 , yielding bandgap‐voltage offsets of 0.20 and 0.21 V. Power and broadband reflectance measurements are used to estimate thermophotovoltaic (TPV) efficiency. The InP‐based cell is estimated to yield 1.09 W cm −2 at 1100 °C versus 0.92 W cm −2 for the GaAs‐based cell, with efficiencies of 16.8 versus 9.2%. The efficiencies of both devices are limited by sub‐bandgap absorption, with power weighted sub‐bandgap reflectances of 81% and 58%, respectively, the majority of which is assumed to occur in the graded buffers. The 1100 °C TPV efficiencies are estimated to increase to 24.0% and 20.7% in structures with the graded buffer removed, if previously demonstrated reflectance is achieved. These devices also have application to laser power conversion in the 2.0–2.3 µm atmospheric window. Peak laser power converter efficiencies of 36.8% and 32.5% are estimated under 2.0 µm irradiances of 1.86 and 2.81 W cm −2 , respectively.

14 SOLAR ENERGY↗
DOE OSTI2022

A Metal‐Organic Framework with Nonpolar Pore Surfaces for the One‐Step Acquisition of C 2 H 4 from a C 2 H 4 and C 2 H 6 Mixture

Abstract Because C 2 H 4 plays an essential role in the chemical industry, economical and energy‐efficient separation of ethylene (C 2 H 4 ) from ethane (C 2 H 6 ) is extremely important. With the exception of energy‐intensive cryogenic distillation, there are few one‐step methods to obtain polymer‐grade (≥99.95 % pure) C 2 H 4 from C 2 H 4 /C 2 H 6 mixtures. Here we report a highly stable metal‐organic‐framework (MOF) FJI‐H11‐Me(des) (FJI‐H=Hong's group in Fujian Institute of Research on the Structure of Matter) which features one‐dimensional hexagonal nonpolar pore surfaces constructed by aromatic rings and alkyl groups. This FJI‐H11‐Me(des) adsorbs C 2 H 6 rather than C 2 H 4 between 273 and 303 K. Practical breakthrough experiments with C 2 H 4 containing 1 % C 2 H 6 have shown that FJI‐H11‐Me(des) can realize the acquisition in one‐step of polymer‐grade, 99.95 % pure C 2 H 4 under various conditions including different gas flow rates, temperatures and relative humidity.

Di, Zhengyi↗
DOE OSTI2021

Direct Recycling of Blended Cathode Materials by Froth Flotation

We report that direct Li-ion battery recycling involves separating cathode active materials in the solid phase while preserving their electrochemical performance. To reuse the recycled ones in new batteries, it is necessary to separate individual cathode components, which would typically occur prior to the rejuvenation and any compositional reformulation processes. Herein, a froth flotation process is developed to separate pristine lithium nickel-manganese-cobalt oxide (LiNi 0.333 Mn 0.333 Co 0.333 O 2 , NMC111) and lithium manganese oxide (LMO) materials. The flotation results show that with multiple stages of the separation processes, a satisfactory separation is achieved with 95% grade or above of NMC111 in the froth product and 95% grade of LMO in the tailing product. The electrochemistry results show that the flotation chemicals have negligible impact on the electrochemical performance of recycled active materials, whereas the NMC111 exhibits a minor capacity fade after being in contact with deionized water at 2% solid concentration. An improvement in both the rate and cycling performance is achieved at 10% solid concentration or higher. It is found that there is little compositional and structural change to the aqueous recycled NMC111 powders. An effective and low-cost separation method for direct recycling mixed cathode compositions is demonstrated.

25 ENERGY STORAGE↗
DOE OSTI2021

Engineering integration in elementary science classrooms: Effects of disciplinary language scaffolds on English learners' content learning and engineering identity

Abstract Background Limited research examines the effects of integrated science and engineering (SE) instruction emphasizing disciplinary literacy and language activities on engineering identity and content understanding. Far fewer studies target English learners (ELs). Purpose The impact of an SE intervention on the development of science, engineering, and technology knowledge as well as engineering identity was examined. To address ELs' learning needs, the curricular design was built on a validated SE model by integrating (1) developmental, (2) language scaffolds, and (3) culturally based accommodations. Design/Method Separate analysis of variance examined the effects of the intervention on science, engineering, and technology knowledge as well as engineering identity. The relationship among engineering identity and content outcomes was also examined. ELs from kindergarten to second grade classrooms were randomly assigned to the integrated SE group or control group. Results Integrated SE instruction significantly increased ELs' science, engineering, and technology knowledge as well as a substantially developed engineering identity. Overall, ELs' engineering identity is associated with an increase in science, engineering, and technology content knowledge. However, second grade girls' identity development was not associated with learning measures. These correlations suggest the context of the engineering activity may have reinforced gendered stereotypes and reduced the effects for girls' engineering attitudes. Conclusions Integrated SE instruction emphasizing disciplinary literacy and cultural accommodations increases early elementary ELs' learning and engineering identity. Future studies should examine the unique effects of language scaffolds and cultural modifications on student learning and the impact of gender stereotypes on girls' engineering attitudes.

Aguirre‐Muñoz, Zenaida↗
DOE OSTI2024

Additive manufacturing of sandwich panels with continuous fiber reinforced high modulus composite facings

Abstract An improved approach consisting of a combination of fiber placement and fused filament fabrication is introduced for the additive manufacture (AM) of structural grade sandwich beams. Here, sandwich beams are additively manufactured using in‐situ deposition and consolidation of continuous fiber unidirectional facings made from a commingled yarn system of e‐glass fiber (~50% vol.) and amorphous PET, and a hexagonal honeycomb core structure made from PETG. Both facings and the sandwich core are manufactured on a single machine, in one sequence (skin‐core‐skin), employing the benefit of matrix compatibility to create autohesion at the interfaces. Flexural and transverse shear rigidity are determined experimentally and compared with analytical predictions and show correlation to within 3%. Flexural strength and core shear strength are also measured. Post‐mortem examinations show that core fracture and core facing debond were the dominant failure mode in flexure. Single cantilever beam tests were performed to evaluate core facing debond toughness. Subsequently, surface preheat using infrared heaters was utilized to increase autohesion between core and facing. The results show debond toughness was increased 4 times using infrared heating. This research effort presents a manufacturing approach that has the potential for the AM of stiff, well bonded, structural grade sandwich beams, in an integrated sequence, employing in‐situ consolidation to the facings, without the need for the use of intermediate adhesives for skin‐to‐core bonding. Highlights An improved additive manufacturing technique for making sandwich panels is developed. Sandwich panel facings have fiber volume fractions of approximately 50%. Surface preheat improves core‐to‐facing debond toughness by a factor of 4. Top and bottom facings are consolidated during manufacture leading to better properties. Experimental results are compared to analytical predictions and show good correlation.

17 WIND ENERGY↗
DOE OSTI2025

Exploring microstructures and anisotropies of serpentinites

Serpentine minerals have received a lot of attention because of their unique crystal structures, their wide occurrence in orogenic belts and their potential role in contributing seismic anisotropy in subducting slabs. Several studies have investigated crystal preferred orientation (CPO) in high temperature antigorite serpentinites from Japan, the Alps, Spain, Cuba and Tibet, documenting significant crystal alignment. However, only a limited number of lower grade serpentines have been explored to date. Mainly because of submicroscopic microstructural heterogeneities CPO cannot be measured with conventional methods such as optical microscopy and EBSD. In this study 15 serpentinites from different tectonic settings in California, the Central Alps and Northern Spain have been investigated, mainly with high energy synchrotron X-ray diffraction, to quantify bulk crystal alignment. We find that CPO is strong on sheared surfaces of fractured blocks and secondary veins but the bulk of most serpentinite samples, except high-grade recrystallized antigorite serpentinite, show only weak crystal alignment. Correspondingly calculated seismic anisotropy based on CPO is not very significant. This is supported by very heterogeneous microstructures as documented with SEM and TEM analyses.

58 GEOSCIENCES↗
DOE OSTI2022

Uncertainty Quantification Framework for Predicting Material Response with Large Number of Parameters: Application to Creep Prediction in Ferritic-Martensitic Steels Using Combined Crystal Plasticity and Grain Boundary Models

This paper presents an uncertainty quantification (UQ) framework for the physics-based model prediction of material response with a large number of parameters. The application problem presented in this work is that of predicting creep in Grade 91 steel at 600°C. The material response is defined with a physically based microstructural model with constitutive equations emulating several observed phenomena in Grade 91 and embodied into an explicit geometry mesoscale finite element model for prior austenite grains and grain boundaries. Creep within the grains and in grain boundaries are represented by crystal plasticity for dislocation motion and a physics-based model for cavity growth and nucleation, respectively. The creep behavior of this material is influenced by several parameters, some of which have a wide range of variation based on experimental data. UQ combined with microstructural modeling can discover the core microstructural causes of experimental variability, leading to improved materials with lower variability in critical long-term material properties. In this study, we investigate the model's uncertainty to identify material properties that may be modified during production to increase creep life and analyze different components of the crystal plasticity model for improvements. For this purpose, a quantity of interest is defined as time to minimum creep rate, which correlates well to the creep failure of the material. A deep neural network model was trained and validated to be used as a surrogate for the finite element model. Then, a variance-based sensitivity analysis is performed on the surrogate model to find the Sobol indices of the input parameters in respect to the output quantity of interest. The Sobol indices are used to reduce the dimensionality of the model. Generalized polynomial chaos expansion is used on the reduced basis models to propagate the uncertainty from the input parameters to the quantity of interest using the deep neural network surrogate model. These results are benchmarked against uncertainty propagation using Monte Carlo simulations. In conclusion, the UQ performed through the reduced basis model captures almost all the uncertainty in the model with significantly fewer simulations, making it possible to perform the UQ directly via simulations with the finite element model rather than surrogate machine-learned models.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Preliminary design of control rods in the single-fluid double-zone thorium molten salt reactor (SD-TMSR)

Recent studies on Molten Salt Reactors (MSRs) showed that the excess reactivity at the beginning of the operation is large for many fueling strategies and must be compensated by a reactivity control system. The current work introduces a reliable safety system based on control rods in addition to the online feed system reactivity control in the Single-fluid Double-zone Thorium-based Molten Salt Reactor (SD-TMSR). Three different initial fissile loadings are considered: 233 U, reactor-grade Pu, and transuranic (TRU) elements as a startup fuel. We applied six different absorbing materials to investigate the main operational and safety parameters in the SD-TMSR: natural B 4 C, enriched B 4 C with 90% 10 B, HfB 2 , HfH 1.62 , Eu 2 O 3 , and Gd 2 O 3 . The present work focuses on control rod design, integral and differential control rod worth, shutdown margin, and shadowing effects at steady-state. We employed the SERPENT-2 Monte-Carlo code to calculate the reactivity worth and analyze the performance of the reactivity control system. We showed that 233 U and reactor-grade Pu startup cores maintain adequate shutdown margin with all considered absorbers. Finally, this report proposes a design of control rod clusters that compensate the excess reactivity of the SD-TMSR loaded with different initial fissile material.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2021

Thermal energy grid storage: Liquid containment and pumping above 2000 °C

As the cost of renewable energy falls below fossil fuels, the key barrier to widespread sustainable electricity has become availability on demand. Energy storage can enable dispatchable renewables, but only with drastic cost reductions compared to current battery technologies. One electricity storage concept that could enable these cost reductions stores electricity as sensible heat in an extremely hot liquid (>2000°C) and uses multi-junction photovoltaics (MPV) as a heat engine to convert it back to electricity on demand hours, or days, later. Furthermore, this paper reports the first containment of silicon in a multipart graphite tank above 2000°C, using material grades that are affordable for energy storage at GWh scales. Low cost molded graphite with particle sizes as large as 10 μm successfully contained metallurgical grade silicon, even with as much as twothirds iron by mass for up to 10 hours and temperatures as high as 2300°C, in tanks as large as two gallons.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

Modeled economic potential for Eucalyptus spp. production for jet fuel additives in the United States

Feedstock price and availability remain a barrier to adoption of cellulosic biofuels. Eucalyptus spp., can produce an energy-dense terpene suitable for high-density synthetic hydrocarbon-type fuel (grade JP-10) production in addition to cellulosic-based feedstock for traditional jet fuels (e.g., grade Jet A) and gasoline. This study modeled economic potential for Eucalyptus to fulfill US fuel markets. Cold-tolerant Eucalyptus was simulated in an annual coppice system for maximized leaf production. Results of the lowest simulated price ($110 t -1 ) show that within 10 years, there is potential to produce 204 million L yr -1 of fuel, including 51 million L yr -1 of JP-10-type fuel, 75 million L yr -1 of Jet A type fuel, and 77 million L yr -1 of gasoline. These quantities of fuel could be valued at approximately $500 million (USD), with feedstock costs totaling approximately $100 million (USD). Longer-term markets (to 20 years) or higher priced (to $220 t -1 ) scenarios show potential for more production. Furthermore, research to determine potential for genetic improvement, delivered fuel costs, and biorefinery siting near existing infrastructure is recommended.

09 BIOMASS FUELS↗
DOE OSTI2025

Process design and techno-economic analysis for bio-based graphite and liquid hydrocarbons production from lignocellulosic biomass

The worldwide demand for graphite, as the main anode material for Li-ion batteries, is expected to double by 2028 since it supports the use of electricity, including transient renewable sources, for energy storage, sustainable mobility, and automation. However, the dependence on non-renewable and external resources jeopardizes the world supply chain. This study explores the technical and economic performance of transforming lignocellulosic biomass into biographite and fuel-grade hydrocarbons through pyrolysis bio-oil upgrading. According to simulation results, the total power demand for the biorefinery reached 10,784 kWh per tonne of biographite, of which 36 % can be supplied by the heat integration network and power plant. Sensitivity and risk analyses were conducted to evaluate the economics, with process yields identified as the most relevant indicators to the minimum selling price (MSP). The analysis revealed a promising cost-competitive range for biographite MSP against fossil-based graphite (medium quality synthetic graphite Chinese market price ~$\$$4.2/kg). Case D, which includes biofuels as a byproduct, presents the best metrics, reaching a MSP of $\$$3.3/kg of anode-grade biographite with a profit margin of 27 %. While including biofuels in the product slate provides the best economic performance, the uncertainty associated with the big capital investment makes its risk 13 % higher to attain an IRR >20 % than the case in which biographite is produced as a standalone product. Overall, this study demonstrates that integrated biorefineries can produce a cost-competitive bio-based anode material for Li-ion batteries.

09 BIOMASS FUELS↗
DOE OSTI2026

Expanding the horizon of bio-naphtha beyond gasoline blend: property characterization and conversion opportunity assessment through technoeconomic and life-cycle analyses

Bio-naphtha, a common by-product of biorefineries, is expected to experience substantial growth in supply due to increasing demands for renewable diesel and synthetic aviation fuel (SAF). However, demand for bio-naphtha itself as a gasoline blendstock is limited because of the electrification of light-duty vehicles. This work investigated valorization opportunities for bio-naphtha from catalytic fast pyrolysis, hydrothermal liquefaction, Fischer–Tropsch synthesis, and hydrotreated esters and fatty acids pathways. These opportunities include producing polymer-grade olefin via steam cracking, SAF via steam cracking followed by olefin oligomerization, and renewable aromatics benzene, toluene, and xylene (BTX) and hydrogen via catalytic reforming. Process models were developed in Aspen Plus V14 and Aspen HYSYS V14 to calculate the mass and energy balances for each conversion step. Technoeconomic assessment and life-cycle analysis were conducted to evaluate the minimum fuel/product selling price, conversion cost, and life-cycle CO2 equivalent (CO2e) emission reduction. Technoeconomic assessment results suggest a minimum fuel/product selling price as low as $1.9/kg of olefins, $6.30/gal of gasoline-equivalent SAF, and $1.2/kg of BTX without any incentives. For all pathways, these prices are dominated by bio-naphtha feedstock costs, which account for at least 76% of the total cost. Compared with petroleum baselines, bio-naphtha-derived SAF, olefins, and BTX can achieve significant CO2e emission reductions from the use of renewable carbon resources. The results of life-cycle analysis and subsequent technoeconomic assessment, incorporating carbon credits, indicate the economic viability of using bio-naphtha for polymer-grade olefin and BTX production, with product costs comparable to market prices.

Xu, Shuang↗
DOE OSTI2020

Low-temperature carbonization of polyacrylonitrile/graphene carbon fibers: A combined ReaxFF molecular dynamics and experimental study

Graphene inclusion in a polymer matrix is a promising route to significantly enhance the mechanical properties of low-grade carbon fibers (CFs). Using ReaxFF molecular dynamics simulation, the atomistic mechanism leading to this enhancement is investigated. We demonstrate that the graphene edges along with the nitrogen and oxygen functional groups play a catalytic role and act as seeds to expedite alignment of the all-carbon rings, which are starting sites for the growth of graphitic structures. To examine the role of this proposed mechanism that enhances the graphitic structure of PAN/graphene CFs, we discuss the experimental results wherein the PAN/graphene CFs carbonized at 1250 C demonstrate 91% (from 632 to 1207 MPa) increase in strength and 101% (from 88 to 177 GPa) enhancement in Young’s modulus compared to PAN-based CFs carbonized at 1500 C. In conclusion, these enhanced mechanical properties of low-grade carbon fibers achieved via graphene inclusion at decreased carbonization temperature provide a means to realize both energy savings and cost reduction.

42 ENGINEERING↗
DOE OSTI2022

Effect of microstructure and temperature on nuclear graphite oxidation using the 3D Random Pore Model

This work compared the 3D Random Pore Model (3D-RPM) with experimental and characterization data to systematically study the effect of nuclear graphite microstructure and air oxidation temperature. It is well known that oxidation-induced weight loss at elevated temperatures degrades graphite structure and properties; however, a fundamental understanding of the role of graphite microstructure is still unclear. In this work, three diverse grades of nuclear graphite—IG-110, NBG-18, and PCEA—were examined and tested at air oxidation temperatures of 600, 650, 700, and 750 °C following ASTM D7542. Here, the 3D-RPM reproduced the microstructure and temperature dependence of mass loss curves for these grades. For the first time, measurements and modeling were combined to show how bulk density and the amount and spatial distribution of open and closed porosity affects oxidation. IG-110 was less dense and had an open pore network that is finer and more uniformly spread, and showed fastest oxidation. PCEA porosity was less uniform and showed less oxidation, while NBG-18 was more dense, had the least fine and uniform porosity, and showed the slowest oxidation. In general, oxidation proceeds faster if open porosity is more uniformly distributed and can incrementally access closed pore surface area with more ease.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Porosity in nuclear graphite and its impact on nuclear reactor science and criticality safety applications

Porosity in nuclear-grade graphite significantly influences its low-energy neutron scattering, yet its effect on underlying phonon properties remains debated. Here, this work integrates inelastic and small-angle neutron scattering (INS/SANS) experiments, advanced atomistic simulations with a novel machine-learned potential (DeepMD), total cross-section measurements, and neutronics calculations (SCALE, MCNP, OpenMC) to investigate porosity’s impact on neutron thermalization. INS measurements on diverse graphite grades reveal no discernible porosity effect on phonon spectra, which align with crystalline graphite. Conversely, total cross-section data below ≈10 meV show increased scattering attributable to SANS. Our DeepMD simulations demonstrate that realistic micropores do not distort phonon spectra, challenging the assumptions in current ENDF/B-VIII.1 porosity thermal scattering laws (TSLs). These TSLs, based on random atom removal, produce unphysical phonon spectra and inflate inelastic cross-sections. Augmenting a crystalline TSL with an SANS component accurately captures experimental total cross-sections. Neutronics benchmarks (ICSBEP/IRPhE) show ENDF porosity TSLs unphysically increase neutron multiplication factor, keff. Crucially, incorporating SANS physics (NCrystal/OpenMC) indicates accurately modeled porosity negligibly affects keff, reactor physics, or criticality safety.

Critical benchmarks↗
DOE OSTI2025

Ensemble cure kinetics network (ECK-Net): A method to derive cure kinetics of thermosetting resin

This paper introduces an Ensemble Cure Kinetics Network (ECK-Net), a neural network (NN)–based framework for modeling the cure kinetics of thermosetting resins within a phenomenological context. ECK-Net replaces traditional analytic models, which require extensive chemical insight and multiple isothermal/non-isothermal experiments, with a data-driven surrogate that maps nonlinear relationships between temperature, degree of cure, and reaction rate from differential scanning calorimetry data. The proposed approach predicts input-dependent kinetic coefficients of a generalized nth-order reaction equation rather than reaction rates directly, enabling a single unified model to represent various epoxy systems without relying on iso-conversional analysis or predefined functional forms. To ensure robustness, multiple independently trained networks under different random initializations are blended through an ensemble strategy, effectively mitigating the stochastic variability inherent to neural networks. The framework is validated using experimental datasets from multiple resin systems, including aerospace-grade materials (Toray 3900-2, Cycom 5320-1, and Hexcel 8552) and a windmill-grade resin (RIMR 035c). The model accurately reproduces the temporal evolution of the degree of cure under manufacturers’ recommended cure cycles across all tested resins systems, yielding Pearson’s correlation coefficients of 0.992, 0.994, 0.993, 0.997, respectively. To demonstrate process-level applicability, the trained network was implemented within the Abaqus environment to simulate out-of-autoclave (OOA) curing process of the CFRP panel composed of Toray T830H-6K/3900-2D prepreg. The simulation results showed excellent agreement with experimental temperature response (maximum peak temperature, simulation: 189.6 °C, experiment: 188.5 °C) and the final degree of cure (simulation: 0.948, experiment: 0.960 ± 0.013), confirming ECK-Net’s capability as a reliable alternative to conventional cure kinetics modeling methods.

Composite curing↗