Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “global support”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Presentation: SMR Current Status: Development Needs and Global Perspectives

Defined as nuclear reactors with a power output up to 300 megawatts electrical (MWe) by the International Atomic Energy Agency (IAEA) and targeted for multipurpose applications, small modular reactors (SMRs) have been recognized as a very promising, clean, affordable, and sustainable energy source by many countries. At present, more than 80 SMRs are under design, development, demonstration, deployment, and beyond (4D+) phases worldwide. This paper focuses on the current world status of SMRs and focuses on the necessary developments to accelerate the process of adopting SMRs as a major energy source globally. SMRs are not a new concept, but they do represent a new vision for older concepts if the challenges inherent within them are mitigated with strategic and realistic solution approaches. The major challenges for SMRs 4D+ like any new reactors are: (a) qualifying the advanced fuel-to-reactor design; (b) supporting rapid scaled/prototypic experimentations; (c) maintaining local and global codes, standards, and licensing; (d) supply chain issues; (e) effective cradle-to-grave nuclear fuel cycle and fuel material transportation, and (f) mitigating financial and environmental risks. These upfront challenges can be mitigated with a synergistic solution approach among the various stakeholders: industry, academia, research, government, and international entities.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2024

SMR Current Status: Development Needs and Global Perspectives

Defined as nuclear reactors with a power output up to 300 megawatts electrical (MWe) by the International Atomic Energy Agency (IAEA) and targeted for multipurpose applications, small modular reactors (SMRs) have been recognized as a very promising, clean, affordable, and sustainable energy source by many countries. At present, more than 80 SMRs are under design, development, demonstration, deployment, and beyond (4D+) phases worldwide. This study focuses on the current world status of SMRs and focuses on the necessary developments to accelerate the process of adopting SMRs as a major energy source globally. SMRs are not a new concept, but they do represent a new vision for older concepts if the challenges inherent within them are mitigated with strategic and realistic solution approaches. The major challenges for SMRs 4D+ like any new reactors are: (a) qualifying the advanced fuel-to-reactor design; (b) supporting rapid scaled/prototypic experimentations; (c) maintaining local and global codes, standards, and licensing; (d) supply chain issues;(e) effective cradle-to-grave nuclear fuel cycle and fuel material transportation, and (f) mitigating financial and environmental risks. These upfront challenges can be mitigated with a synergistic solution approach among the various stakeholders: industry, academia, research, government, and international entities.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

Designing a drone delivery network with automated battery swapping machines

Drones are projected to alter last-mile delivery, but their short travel range is a concern. In this study, we propose a drone delivery network design using automated battery swapping machines (ABSMs) to extend ranges. The design minimizes the long-term delivery costs, including ABSM investment, drone ownership, and cost of the delivery time, and locates ABSMs to serve a set of customers. We build a mixed-integer nonlinear program that captures the nonlinear waiting time of drones at ABSMs. To solve the problem, we create an exact solution algorithm that finds the globally optimal solution using a derivative-supported cutting-plane method. To validate the applicability of our program, we conduct a case study on the Chicago Metropolitan area using cost data from leading ABSM manufacturer and geographical data from the planning and operations language for agent-based regional integrated simulation (more commonly known as POLARIS). A sensitivity analysis identifies that ABSM service times and costs are the key parameters impacting the long-term adoption of drone delivery.

25 ENERGY STORAGE↗
DOE OSTI2024

Towards Diverse and Representative Global Pretraining Datasets for Remote Sensing Foundation Models

The design of a pretraining dataset is emerging as a critical component for the generality of foundation models. In the remote sensing realm, large volumes of imagery and benchmark datasets exist that can be leveraged to pretrain foundation models, however using this imagery in absence of a well-crafted sampling strategy is inefficient and has the potential to create biased and less generalizable models. Here, we provide a discussion and vision for the curation and assessment of pretraining datasets for remote sensing geospatial foundation models. We highlight the importance of geographic, temporal, and image acquisition diversity and review possible strategies to enable such diversity at global scale. In addition to these characteristics, support for various spatial-temporal pretext tasks within the dataset is also critical. Ultimately, our primary objective is to place emphasis on and draw attention to the data curation stage of the foundation model development pipeline. By doing so, we think it is possible to reduce biases of geospatial foundation models, as well as enable broader generalization to downstream remote sensing tasks and applications.

Arndt, Jacob↗
DOE OSTI2022

Computational Modeling and Simulation for Nonproliferation: The History (and Present) of Monte Carlo and the MCNP(R) Code at Los Alamos [Slides]

The emergence of the Monte Carlo method as a research tool springs from work done at Los Alamos in the 1940s.Monte Carlo and the MCNP Code have been and continue to be developed at Los Alamos for many decades. From basic science in support of understanding nuclear interaction physics to global security applications, application uses of the code are extensive. Recent R&D projects and code modernization efforts make the MCNP code a great tool for nuclear nonproliferation applications. In collaboration with nuclear safeguards experts, new training has just recently been developed to help new practitioners learn how to use the code for nuclear safeguards applications.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Biosphere Futures: a database of social-ecological scenarios

T. Biosphere Futures (https://biospherefutures.net/) is a new online database to collect and discover scenario studies from across the world, with a specific focus on scenarios that explicitly incorporate interdependencies between humans and their supporting ecosystems. It provides access to a globally diverse collection of case studies that includes most ecosystems and regions, enabling exploration of the multifaceted ways in which the future might unfold. Together, the case studies illuminate the diversity and plurality of people’s expectations and aspirations for the future. The objective of Biosphere Futures is to promote the use of scenarios for sustainable development of the biosphere and to foster a community of practice around social-ecological scenarios. We do so by facilitating the assessment, synthesis, and comparative analysis of scenario case studies, pointing to relevant resources, and by helping practitioners and researchers to disseminate and showcase their own work. This article begins by outlining the rationale behind the creation of the database, followed by an introduction to its functionality and the criteria employed for selecting case studies. Subsequently, we present a synthesis of the first 100 case studies included in the scenarios database, highlighting emerging patterns and identifying potential avenues for further research. Finally, given that broader utilization and contributions to the database will enhance the achievement of Biosphere Futures’ objectives, we invite the creators of social-ecological scenarios to contribute additional case studies. By expanding the database’s breadth and depth, we can collectively foster a more nuanced understanding of the possible trajectories of our biosphere and enable better decision making for sustainable development.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1971

NASA earth resources satellite research and development program.

The NASA Earth Resources Survey (ERS) Program is discussed as an effort to augment the presently used ground techniques and limited aerial photography for obtaining larger survey data. The topics include the scientific and technological aspects of remote earth resources sensing, the past and present activities in this field, the immediate plans for the implementation of the program, and a summary of current and future international participation in it. The effective target areas of space observations under the program are listed as synoptic surveys, agriculture and forestry, geography, geology and mineral resources, hydrology and water resources, and marine resources. Acquisition of near real-time information, reduced data acquisition time, repeated coverage, measurement uniformity, global surveys without large on-site support requirements are indicated as the advantages of space observations.

Jaffe, L.↗
NASA NTRS1972

Requirements for a marine geoid compatible with geoid deducible from satellite altimetry

Theory deficiencies, data, and potential computational procedures that make the physical determination of the ocean geoid with true scale, shape, and absolute orientation of an elusive target are outlined. Satellite altimetry potential, in combination with adequate ground support and sea truth to resolve accurate global marine geoid and other peripheral benefits associated with ocean physics, are stated. Results are given in tabular form.

Fubara, D. M. J.↗
NASA NTRS1989

Earth orbiting technologies for understanding global change

This paper considers the technology requirements needed to support the Mission to Planet Earth concept, which will consist of several sun synchronous polar platforms; a series of low-earth orbit equatorial missions, such as Space Shuttle payloads, Space-Station-attached payloads, and the Explorer-class Earth Probes; and five geostationary platforms. In particular, the technology requirements in the areas of space-based observation, data/information, and spacecraft operation are examined.

Harris, Leonard A.↗
NASA NTRS1990

PROBE (Precision Reflector Orbital Build Experiment): A proposed flight experiment to study EVA assembly of precision segmented reflectors

PROBE (Precision Reflector Orbital Build Experiment) is a Shuttle flight demonstration experiment designed to study extravehicular activity (EVA) assembly of precision segmented reflectors. PROBE will support missions being considered for NASA's Global Change Technology Initiative as well as other missions in astrophysics and spacecraft optical communications requiring large precision reflectors. Such reflectors are envisioned to consist of a low-mass backup truss to which the optical surface is attached. Because of their large size, these reflectors will be constructed on-orbit from smaller pieces which can be packaged in the launch vehicle. The technology to be developed with PROBE also has application for construction of solar dynamic collectors which are planned for the enhanced configuration of Space Station Freedom. Viewgraphs of PROBE are presented.

Heard, Walter↗
NASA NTRS1994

Comparison of the compressive strengths for stitched and toughened composite systems

The compression strength of a stitched and a toughened matrix graphite/epoxy composite was determined and compared to a baseline unstitched untoughened composite. Two different layups with a variety of test lengths were tested under both ambient and hot/wet conditions. No significant difference in strength was seen for the different materials when the gage lengths of the specimens were long enough to lead to a buckling failure. For shorter specimens, a 30 percent reduction in strength from the baseline was seen due to stitching for both a 48-ply quasi-isotropic and a (0/45/0/-45/90/-45/0/45/0)s laminate. Analysis of the results suggested that the decrease in strength was due to increased fiber misalignment due to the stitches. An observed increasing strength with decreasing gage length, which was seen for all materials, was explained with a size effect model. The model assumed a random distribution of flaws (misaligned fibers). The toughened materials showed a small increase in strength over the baseline material for both laminates presumably due to the compensating effects of a more compliant matrix and straighter fibers in the toughened material. The hot/wet strength of the stitched and baseline material fell 30 percent below their ambient strengths for shorter, nonbuckling specimen, while the strength of the toughened matrix material only fell 20 percent. Video images of the failing specimen were recorded and showed local failures prior to global collapse of the specimen. These images support the theory of a random distribution of flaws controlling composite failure. Failed specimen appearance, however, seems to be a misleading indication of the cause of failure.

Reeder, James R.↗
NASA NTRS1995

Comparison of the Compressive Strengths for Stitched and Toughened Composite Systems

The compression strength of a stitched and a toughened matrix graphite/epoxy composite was determined and compared to a baseline unstitched untoughened composite. Two different layups with a variety of test lengths were tested under both ambient and hot/wet conditions. No significant difference in strength was seen for the different materials when the gage lengths of the specimens were long enough to lead to a buckling failure. For shorter specimens, a 30% reduction in strength from the baseline was seen due to stitching for both a 48-ply quasi-isotropic and a (0/45/0/-45/90/-45/0/45/0)s laminate. Analysis of the results suggested that the decrease in strength was due to increased fiber misalignment due to the stitches. An observed increasing strength with decreasing gage length, which was seen for all materials, was explained with a size effect model. The model assumed a random distribution of flaws (misaligned fibers). The toughened material showed a small increase in strength over the baseline material for both laminates presumably due to the compensating effects of a more compliant matrix and straighter fibers in the toughened material. The hot/wet strength of the stitched and baseline material fell 30% below their ambient strengths for shorter, non-buckling specimen, while the strength of the toughened matrix material only fell 20%. Video images of the failing specimen were recorded and showed local failures prior to global collapse of the specimen. These images support the theory of a random distribution of flaws controlling composite failure. Failed specimen appearance however, seems to be a misleading indication of the cause of failure.

Reeder, James R.↗
NASA NTRS1996

Modular Software for Spacecraft Navigation Using the Global Positioning System (GPS)

The Goddard Space Flight Center Flight Dynamics and Mission Operations Divisions have jointly investigated the feasibility of engineering modular Global Positioning SYSTEM (GPS) navigation software to support both real time flight and ground postprocessing configurations. The goals of this effort are to define standard GPS data interfaces and to engineer standard, reusable navigation software components that can be used to build a broad range of GPS navigation support applications. The paper discusses the GPS modular software (GMOD) system and operations concepts, major requirements, candidate software architecture, feasibility assessment and recommended software interface standards. In additon, ongoing efforts to broaden the scope of the initial study and to develop modular software to support autonomous navigation using GPS are addressed,

Truong, S. H.↗
NASA NTRS1997

IGS Directory

The International GPS (Global Positioning System) Service for Geodynamics (IGS) supports and helps coordinate GPS data production and parameters useful for generating more accurate data products. The IGS has operated a GPS tracking system for several years. It contains more than 100 stations worldwide and has produced a combined GPS ephemeris that has become the standard for geodesists and geophysicists worldwide. IGS data and products are freely available to all, thanks to the cooperation and participation of all the IGS members. This directory provides data on the stations and provides names and contact information with personnel involved with the IGS.

Source record↗
NASA NTRS1998

On the Tropical Rainfall Measuring Mission (TRMM): Bringing NASA's Earth System Science Program to the Classroom

The Tropical Rainfall Measuring Mission is the first mission dedicated to measuring tropical and subtropical rainfall using a variety of remote sensing instrumentation, including the first spaceborne rain-measuring radar. Since the energy released when tropical rainfall occurs is a primary "fuel" supply for the weather and climate "engine"; improvements in computer models which predict future weather and climate states may depend on better measurements of global tropical rainfall and its energy. In support of the STANYS conference theme of Education and Space, this presentation focuses on one aspect of NASA's Earth Systems Science Program. We seek to present an overview of the TRMM mission. This overview will discuss the scientific motivation for TRMM, the TRMM instrument package, and recent images from tropical rainfall systems and hurricanes. The presentation also targets educational components of the TRMM mission in the areas of weather, mathematics, technology, and geography that can be used by secondary school/high school educators in the classroom.

Shepherd, J. Marshall↗
NASA NTRS2001

The Evolution of the Martian Hydrosphere: Implications for the Fate of a Primordial Ocean and the Current State of the Northern Plains

In this paper we consider the hydraulic and thermal conditions that gave rise to the elevated source regions of the Late Hesperian outflow channels and explore their implications for the evolution of the Martian hydrosphere. We find that if the outflow channel floodwaters were derived from a subpermafrost aquifer, then it implies that, throughout the planet's first billion years of evolution, as much as one third of its surface was covered by standing bodies of water and ice. Following the development of the global dichotomy, the bulk of this water would have existed as an ice-covered ocean in the northern plains. We demonstrate that the progressive crustal assimilation of this early surface reservoir of H2O (punctuated by possible episodes of less extensive flooding) was a natural consequence of the planet's subsequent climatic and geothermal evolution-potentially cycling the equivalent of a km-deep global ocean of water through the atmosphere and subsurface every approx. 10(exp 9) years. In response to the long-term decline in planetary heat flow, the progressive coldtrapping of H2O into the growing cryosphere is expected to have significantly depleted the original inventory of groundwater-a development that could well explain the apparent decline in outflow channel activity observed during the Amazonian. Although primarily a theoretical analysis, our findings appear remarkably consistent with the geomorphic and topographic evidence that Mars once possessed a primordial ocean and that a substantial relic of that body continues to survive as massive ice deposits within the northern plains. Confirmation of the presence of such deposits, combined with the potential detection of a global-scale groundwater system, would provide persuasive support for the validity of this analysis.

Clifford, Stephen M.↗
NASA NTRS1999

X-33 Experimental Aeroheating at Mach 6 Using Phosphor Thermography

The goal of the NASA Reusable Launch Vehicle (RLV) technology program is to mature and demonstrate essential, cost effective technologies for next generation launch systems. The X-33 flight vehicle presently being developed by Lockheed Martin is an experimental Single Stage to Orbit (SSTO) demonstrator that seeks to validate critical technologies and insure applicability to a full scale RLV. As with the design of any hypersonic vehicle, the aeroheating environment is an important issue and one of the key technologies being demonstrated on X-33 is an advanced metallic Thermal Protection System (TPS). As part of the development of this TPS system, the X-33 aeroheating environment is being defined through conceptual analysis, ground based testing, and computational fluid dynamics. This report provides an overview of the hypersonic aeroheating wind tunnel program conducted at the NASA Langley Research Center in support of the ground based testing activities. Global surface heat transfer images, surface streamline patterns, and shock shapes were measured on 0.013 scale (10-in.) ceramic models of the proposed X-33 configuration in Mach 6 air. The test parametrics include angles of attack from -5 to 40 degs, unit Reynolds numbers from 1x106 to 8x106/ft, and body flap deflections of 0, 10, and 20 deg. Experimental and computational results indicate the presence of shock/shock interactions that produced localized heating on the deflected flaps and boundary layer transition on the canted fins. Comparisons of the experimental data to laminar and turbulent predictions were performed. Laminar windward heating data from the wind tunnel was extrapolated to flight surface temperatures and generally compared to within 50 deg F of flight prediction along the centerline. When coupled with the phosphor technique, this rapid extrapolation method would serve as an invaluable TPS design tool.

Horvath, Thomas J.↗
NASA NTRS1997

The International GPS Service: A Global Resource for GPS Applications and Research

Since June, 1992, the International GPS service has been coordinating a global civilian GPS infrastructure in order to support numerous GPS applications and research activities. A key aspect of the IGS is the reliability and quality of the analysis products that have been made available over the past five years through the IGS Analysis Centers and the Analysis Center Coordinator.

Applications and Research↗