Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “geometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Role of colliding geometry on the balance energy of mass-asymmetric systems

We study the role of colliding geometry on the balance energy (E{sub bal}) of mass-asymmetric systems by varying the mass asymmetry ({eta} =A{sub T}-A{sub p}/A{sub T}+A{sub P}, where A{sub T} and A{sub P} are the masses of the target and projectile, respectively) from 0.1 to 0.7, over the mass range 40-240 and on the mass dependence of the balance energy. Our findings reveal that colliding geometry has a significant effect on the E{sub bal} of asymmetric systems. We find that, as we go from central collisions to peripheral ones, the effect of mass asymmetry on E{sub bal} increases throughout the mass range. Interestingly, we find that for every fixed system mass (A{sub tot}) the effect of the impact parameter variation is almost uniform throughout the mass-asymmetry range. For each {eta}, E{sub bal} follows a power-law behavior ({proportional_to}A{sup {tau}}) at all colliding geometries.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Rapidity dependence of initial state geometry and momentum correlations in p + Pb collisions

Event geometry and initial state correlations have been invoked as possible explanations of long range azimuthal correlations observed in high multiplicity p+p and p+Pb collisions. We study the rapidity dependence of initial state momentum correlations and event-by-event geometry in √s = 5.02 TeV p+Pb collisions within the 3+1D IP-Glasma model [1], where the longitudinal structure is governed by JIMWLK rapidity evolution of the incoming nuclear gluon distributions. Furthermore, we find that the event geometry is correlated across large rapidity intervals whereas initial state momentum correlations are relatively short range in rapidity. Based on our results, we discuss implications for the relevance of both effects in explaining the origin of collective phenomena in small systems.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Denoising diffusion models with geometry adaptation for high fidelity calorimeter simulation

Simulation is crucial for all aspects of collider data analysis, but the available computing budget in the High Luminosity LHC era will be severely constrained. Generative machine learning models may act as surrogates to replace physics-based full simulation of particle detectors, and diffusion models have recently emerged as the state of the art for other generative tasks. Here, we introduce CaloDiffusion, a denoising diffusion model trained on the public CaloChallenge datasets to generate calorimeter showers. Our algorithm employs 3D cylindrical convolutions, which take advantage of symmetries of the underlying data representation. To handle irregular detector geometries, we augment the diffusion model with a new geometry latent mapping (GLaM) layer to learn forward and reverse transformations to a regular geometry that is suitable for cylindrical convolutions. The showers generated by our approach are nearly indistinguishable from the full simulation, as measured by several different metrics.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Intersecting solitons, amoeba, and tropical geometry

We study the generic intersection (or web) of vortices with instantons inside, which is a 1/4 Bogomol'nyi-Prasad-Sommerfield state in the Higgs phase of five-dimensional N=1 supersymmetric U(N{sub C}) gauge theory on R{sub t}x(C*){sup 2}{approx_equal}R{sup 2,1}xT{sup 2} with N{sub F}=N{sub C} Higgs scalars in the fundamental representation. In the case of the Abelian-Higgs model (N{sub F}=N{sub C}=1), the intersecting vortex sheets can be beautifully understood in a mathematical framework of amoeba and tropical geometry, and we propose a dictionary relating solitons and gauge theory to amoeba and tropical geometry. A projective shape of vortex sheets is described by the amoeba. Vortex charge density is uniformly distributed among vortex sheets, and negative contribution to instanton charge density is understood as the complex Monge-Ampere measure with respect to a plurisubharmonic function on (C*){sup 2}. The Wilson loops in T{sup 2} are related with derivatives of the Ronkin function. The general form of the Kaehler potential and the asymptotic metric of the moduli space of a vortex loop are obtained as a by-product. Our discussion works generally in non-Abelian gauge theories, which suggests a non-Abelian generalization of the amoeba and tropical geometry.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The matter Lagrangian and the energy-momentum tensor in modified gravity with nonminimal coupling between matter and geometry

We show that in modified f(R) type gravity models with nonminimal coupling between matter and geometry, both the matter Lagrangian and the energy-momentum tensor are completely and uniquely determined by the form of the coupling. This result is obtained by using the variational formulation for the derivation of the equations of motion in the modified gravity models with geometry-matter coupling, and the Newtonian limit for a fluid obeying a barotropic equation of state. The corresponding energy-momentum tensor of the matter in modified gravity models with nonminimal coupling is more general than the usual general-relativistic energy-momentum tensor for perfect fluids, and it contains a supplementary, equation of state dependent term, which could be related to the elastic stresses in the body, or to other forms of internal energy. Therefore, the extra force induced by the coupling between matter and geometry never vanishes as a consequence of the thermodynamic properties of the system, or for a specific choice of the matter Lagrangian, and it is nonzero in the case of a fluid of dust particles.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Thermodynamic geometry of charged rotating BTZ black holes

We study the thermodynamics and the thermodynamic geometries of charged rotating Banados-Teitelboim-Zanelli black holes in (2+1)-gravity. We investigate the thermodynamics of these systems within the context of the Weinhold and Ruppeiner thermodynamic geometries and the recently developed formalism of geometrothermodynamics. Considering the behavior of the heat capacity and the Hawking temperature, we show that Weinhold and Ruppeiner geometries cannot describe completely the thermodynamics of these black holes and of their limiting case of vanishing electric charge. In contrast, the Legendre invariance imposed on the metric in geometrothermodynamics allows one to describe the charged rotating Banados-Teitelboim-Zanelli black holes and their limiting cases in a consistent and invariant manner.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Geometries of edge and mixed dislocations in bcc Fe from first principles calculations

We use density functional theory (DFT) to compute the core structures of $a_0[100](010)$ edge, $a_0[100](011)$ edge, $a_0/2[\bar{1}\bar{1}1](1\bar{1}0)$ edge, and $a_0/2[111](1\bar{1}0)$ $71^{\circ}$ mixed dislocations in body-centered cubic (bcc) Fe. The calculations are performed using flexible boundary conditions (FBC), which effectively allow the dislocations to relax as isolated defects by coupling the DFT core to an infinite harmonic lattice through the lattice Green function (LGF). We use the LGFs of the dislocated geometries in contrast to most previous FBC-based dislocation calculations that use the LGF of the bulk crystal. The dislocation LGFs account for changes in the topology of the crystal in the core as well as local strain throughout the crystal lattice. A simple bulk-like approximation for the force constants in a dislocated geometry leads to dislocation LGFs that optimize the core structures of the $a_0[100](010)$ edge, $a_0[100](011)$ edge, and $a_0/2[111](1\bar{1}0)$ $71^{\circ}$ mixed dislocations. This approximation fails for the $a_0/2[\bar{1}\bar{1}1](1\bar{1}0)$ dislocation however, so in this case we derive the LGF from more accurate force constants computed using a Gaussian approximation potential. The standard deviations of the dislocation Nye tensor distributions quantify the widths of the dislocation cores. The relaxed cores are compact, and the local magnetic moments on the Fe atoms closely follow the volumetric strain distributions in the cores. We also compute the core structures of these dislocations using eight different classical interatomic potentials, and quantify symmetry differences between the cores using the Fourier coefficients of their Nye tensor distributions. Most of the core structures computed using the classical potentials agree well with the DFT results. Furthermore the DFT core geometries provide benchmarking for classical potential studies of work-hardening, as well as substitutional and interstitial sites for computing solute-dislocation interactions that serve as inputs for mesoscale models of solute strengthening and solute diffusion near dislocations.

36 MATERIALS SCIENCE↗

Multistate Geometry of Shift Current and Polarization

The quantum metric and Berry curvature capture essential properties of nontrivial Bloch states and underpin many fascinating phenomena. However, it becomes increasingly evident that a more comprehensive understanding of quantum state geometry is necessary to explain properties involving Bloch states of multiple bands, such as optical transitions. To this end, we employ quantum state projectors to develop an explicitly gauge-invariant formalism and demonstrate its power with applications to nonlinear optics and the theory of electronic polarization. We provide a simple expression for the shift current that resolves its precise relation to the moments of electronic polarization, clarifies the treatment of band degeneracies, and reveals its decomposition into the sum of the skewness of the occupied states and intrinsically multistate geometry. The projector approach is applied to calculate nonlinear optical properties of transition metal dichalcogenides (TMDs) layers, using previously calculated minimal tight-binding models, and demonstrated analytically on a three-band generalization of the Rice-Mele chain to elucidate the different contributions. We close with comments on further applications of the projector operator approach to multistate geometry.

electric polarization↗

Kerr effective black hole geometries in supergravity

We derive the explicit embedding of the effective Kerr spacetimes, which are pertinent to the vanishing of static Love numbers, soft hair descriptions of Kerr black holes, and low-frequency scalar-Kerr scattering amplitudes, as solutions within 𝑁 = 2 supergravity. These spacetimes exhibit a hidden 𝑆⁢𝐿⁡(2,𝑅) × 𝑈⁡(1) or 𝑆⁢𝑂⁡(4,2) symmetry resembling the so called subtracted geometries with 𝑆⁢𝐿⁡(2,𝑅) × 𝑆⁢𝐿⁡(2,𝑅) symmetry, which accurately represent the near-horizon geometry of Kerr black holes and, as we will argue most accurately represents the internal structure of the Kerr black hole. To quantify the differences among the effective Kerr spacetimes, we compare their physical quantities, internal structures, and geodesic equations. Although their thermodynamic properties, including entropy, match those of Kerr, our study uncovers significant differences in the interiors of these effective Kerr solutions. A careful examination of the internal structure of the spacetimes highlights the distinctions between various effective Kerr geometries and their quasinormal spectra.

quantum aspects of black holes↗

GPU Data Access on Complex Geometries for D3Q19 Lattice Boltzmann Method

GPU performance of the lattice Boltzmann method (LBM) depends heavily on memory access patterns. When LBM is advanced with GPUs on complex computational domains, geometric data is typically accessed indirectly, and lattice data is typically accessed lexicographically in the Structure of Array (SoA) layout. Although there are a variety of existing access patterns beyond the typical choices, no study has yet examined the relative efficacy between them. Here, we compare a suite of memory access schemes via empirical testing and performance modeling. We find strong evidence that semi-direct addressing is the superior addressing scheme for the majority of cases examined: Semi-direct addressing increases computational speed and often reduces memory consumption. For lattice layout, we find that the Collected Structure of Arrays (CSoA) layout outperforms the SoA layout. When compared to state-of-the-art practices, our recommended addressing modifications lead to performance gains between 10-40% across different complex geometries, fluid volume fractions, and resolutions. The modifications also lead to a decrease in memory consumption by as much as 17%. Having discovered these improvements, we examine a highly resolved arterial geometry on a leadership class system. On this system we present the first near-optimal strong results for LBM with arterial geometries run on GPUs. We also demonstrate that the above recommendations remain valid for large scale, many device simulations, which leads to an increased computational speed and average memory usage reductions. To understand these observations, we employ performance modeling which reveals that semi-direct methods outperform indirect methods due to a reduced number of total loads/stores in memory, and that CSoA outperforms SoA and bundling due to improved caching behavior.

Herschlag, Gregory↗

Impact of Heat Input and Step Over Distance on Part Geometry for Multi-Bead WAAM Components

Abstract This study investigates the impact of heat input and overlap ratio or stepover distance on part geometry in wire arc additive manufacturing (WAAM). In this work, an experimental approach was taken to quantify the variation in height and aspect ratio of walls at different combinations of overlap and heat input. Multi-bead walls were deposited with the overlap ratio varying from ½, ⅔, and 1 at a low, medium, and high-power set point on the welding power supply. A relationship between heat input, overlap ratio, and the resultant part geometry is established. Trials with an overlap ratio of one and low to medium heat input exhibited greater lack of fusion defects than the high heat input trials. At higher heat input levels, the as-deposited geometry was found to have less variation in height and an increase in aspect ratio compared to lower heat input trials. The aspect ratio of deposited walls ranged from approximately 1, for the low-power trial with an overlap ratio of ½, to approximately 7, for the high-power trial with an overlap ratio of 1. Additionally, the low and medium power trials with an overlap ratio of ⅔ exhibited the least height variation in the top surface for those heat input levels with an average range of 2.9 mm and 1.8 mm respectively. For the high heat input trials, an overlap ratio of 1 was observed to have the least variation in height with a standard deviation of 0.42 mm and an average range of 1.7 mm; however, lack of fusion defects were present in the top surface and the part cross section.

Hussein, Zaky↗

Specimen Size and Geometry Effects on the Master Curve Fracture Toughness Measurements of EUROFER97 and F82H Steels

EUROFER97 and F82H are two leading reduced-activation ferritic-martensitic (RAFM) steels for fusion blanket applications. Exposure to the harsh environment of fusion reactors can result in severe degradation of materials fracture toughness (FT). Thus, the post-irradiation evaluation of FT is critical to understanding the material behavior. Due to the space constraint of irradiation facilities, the development of small specimen test techniques (SSTT) is necessary to evaluate the performance of irradiated materials. In this study, we evaluated the specimen size and geometry effects on the ductile-to-brittle transition FT of EUROFER97 batch-3 and F82H-BA12 steels. The specimen thicknesses ranged from 1.65 to 12.7 mm and the geometries included 1.65 mm bend bar, 4 mm mini-compact tension (miniCT), and 0.5T compact tension (CT) specimens. Fracture toughness testing and evaluations were performed using the Master Curve method in the ASTM E1921-19 standard. After size correction to 1T size using the Master Curve method, no specimen size effect was observed between the 4 mm miniCT and 0.5T CT specimens for the Master Curve reference temperature T0Q, while the bend bars yielded a higher T0Q. A strong effect of fatigue precrack front straightness on T0Q for 0.5T CT specimens was observed. The minimum number of specimens needed for each specimen geometry has been determined.

Chen, Xiang↗

SU-C-304-01: Investigation of Various Detector Response Functions and Their Geometry Dependence in a Novel Method to Address Ion Chamber Volume Averaging Effect

Purpose: A novel convolution-based approach has been proposed to address ion chamber (IC) volume averaging effect (VAE) for the commissioning of commercial treatment planning systems (TPS). We investigate the use of various convolution kernels and its impact on the accuracy of beam models. Methods: Our approach simulates the VAE by iteratively convolving the calculated beam profiles with a detector response function (DRF) while optimizing the beam model. At convergence, the convolved profiles match the measured profiles, indicating the calculated profiles match the “true” beam profiles. To validate the approach, beam profiles of an Elekta LINAC were repeatedly collected with ICs of various volumes (CC04, CC13 and SNC 125) to obtain clinically acceptable beam models. The TPS-calculated profiles were convolved externally with the DRF of respective IC. The beam model parameters were reoptimized using Nelder-Mead method by forcing the convolved profiles to match the measured profiles. We evaluated three types of DRFs (Gaussian, Lorentzian, and parabolic) and the impact of kernel dependence on field geometry (depth and field size). The profiles calculated with beam models were compared with SNC EDGE diode-measured profiles. Results: The method was successfully implemented with Pinnacle Scripting and Matlab. The reoptimization converged in ∼10 minutes. For all tested ICs and DRFs, penumbra widths of the TPS-calculated profiles and diode-measured profiles were within 1.0 mm. Gaussian function had the best performance with mean penumbra width difference within 0.5 mm. The use of geometry dependent DRFs showed marginal improvement, reducing the penumbra width differences to less than 0.3 mm. Significant increase in IMRT QA passing rates was achieved with the optimized beam model. Conclusion: The proposed approach significantly improved the accuracy of the TPS beam model. Gaussian functions as the convolution kernel performed consistently better than Lorentzian and parabolic functions. Further improvement of using geometry-dependent kernels was marginal.

60 APPLIED LIFE SCIENCES↗

SU-E-I-79: Source Geometry Dependence of Gamma Well-Counter Measurements

Purpose: To determine the effect of liquid sample volume and geometry on counting efficiency in a gamma well-counter, and to assess the relative contributions of sample geometry and self-attenuation. Gamma wellcounters are standard equipment in clinical and preclinical studies, for measuring patient blood radioactivity and quantifying animal tissue uptake for tracer development and other purposes. Accurate measurements are crucial. Methods: Count rates were measured for aqueous solutions of 99m- Tc at four liquid volume values in a 1-cm-diam tube and at six volume values in a 2.2-cm-diam vial. Total activity was constant for all volumes, and data were corrected for decay. Count rates from a point source in air, supported by a filter paper, were measured at seven heights between 1.3 and 5.7 cm from the bottom of a tube. Results: Sample volume effects were larger for the tube than for the vial. For the tube, count efficiency relative to a 1-cc volume ranged from 1.05 at 0.05 cc to 0.84 at 3 cc. For the vial, relative count efficiency ranged from 1.02 at 0.05 cc to 0.87 at 15 cc. For the point source, count efficiency relative to 1.3 cm from the tube bottom ranged from 0.98 at 1.8 cm to 0.34 at 5.7 cm. The relative efficiency of a 3-cc liquid sample in a tube compared to a 1-cc sample is 0.84; the average relative efficiency for the solid sample in air between heights in the tube corresponding to the surfaces of those volumes (1.3 and 4.8 cm) is 0.81, implying that the major contribution to efficiency loss is geometry, rather than attenuation. Conclusion: Volume-dependent correction factors should be used for accurate quantitation radioactive of liquid samples. Solid samples should be positioned at the bottom of the tube for maximum count efficiency.

60 APPLIED LIFE SCIENCES↗

Multisource inverse-geometry CT. Part I. System concept and development

Purpose: This paper presents an overview of multisource inverse-geometry computed tomography (IGCT) as well as the development of a gantry-based research prototype system. The development of the distributed x-ray source is covered in a companion paper [V. B. Neculaes et al., “Multisource inverse-geometry CT. Part II. X-ray source design and prototype,” Med. Phys. 43, 4617–4627 (2016)]. While progress updates of this development have been presented at conferences and in journal papers, this paper is the first comprehensive overview of the multisource inverse-geometry CT concept and prototype. The authors also provide a review of all previous IGCT related publications. Methods: The authors designed and implemented a gantry-based 32-source IGCT scanner with 22 cm field-of-view, 16 cm z-coverage, 1 s rotation time, 1.09 × 1.024 mm detector cell size, as low as 0.4 × 0.8 mm focal spot size and 80–140 kVp x-ray source voltage. The system is built using commercially available CT components and a custom made distributed x-ray source. The authors developed dedicated controls, calibrations, and reconstruction algorithms and evaluated the system performance using phantoms and small animals. Results: The authors performed IGCT system experiments and demonstrated tube current up to 125 mA with up to 32 focal spots. The authors measured a spatial resolution of 13 lp/cm at 5% cutoff. The scatter-to-primary ratio is estimated 62% for a 32 cm water phantom at 140 kVp. The authors scanned several phantoms and small animals. The initial images have relatively high noise due to the low x-ray flux levels but minimal artifacts. Conclusions: IGCT has unique benefits in terms of dose-efficiency and cone-beam artifacts, but comes with challenges in terms of scattered radiation and x-ray flux limits. To the authors’ knowledge, their prototype is the first gantry-based IGCT scanner. The authors summarized the design and implementation of the scanner and the authors presented results with phantoms and small animals.

60 APPLIED LIFE SCIENCES↗

Role of local geometry in the spin and orbital structure of transition metal compounds

We analyze the role of local geometry in the spin and orbital interaction in transition metal compounds with orbital degeneracy. We stress that the tendency observed in the most studied case (transition metals in O{sub 6} octahedra with one common oxygen—common corner of neighboring octahedra—and with ~180° metal–oxygen–metal bonds), that ferro-orbital ordering renders antiferro-spin coupling and, vice versa, antiferro-orbitals give ferro-spin ordering, is not valid in the general case, in particular, for octahedra with a common edge and with ~90° M–O–M bonds. Special attention is paid to the “third case,” that of neighboring octahedra with a common face (three common oxygens), which has largely been disregarded until now, although there are many real systems with this geometry. Interestingly enough, the spin-orbit exchange in this case turns out to be simpler and more symmetric than in the first two cases. We also consider, which form the effective exchange takes for different geometries in the case of strong spin–orbit coupling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determination of electron-nucleus collisions geometry with forward neutrons

There are a large number of physics programs one can explore in electron-nucleus collisions at a future electron-ion collider. Collision geometry is very important in these studies, while the measurement for an event-by-event geometric control is rarely discussed in the prior deep-inelastic scattering experiments off a nucleus. This paper seeks to provide some detailed studies on the potential of tagging collision geometries through forward neutron multiplicity measurements with a zero degree calorimeter. As a result, this type of geometry handle, if achieved, can be extremely beneficial in constraining nuclear effects for the electron-nucleus program at an electron-ion collider.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Gaussian null coordinates, near-horizon geometry and conserved charges on the horizon of extremal nondilatonic black p-branes

In this paper, we examine the emergence of conserved charges on the horizon of a particular class of extremal nondilatonic black [Formula: see text]-branes (which reduce to extremal dilatonic black holes in [Formula: see text] dimensions upon toroidal compactification) in the presence of a probe massless scalar field in the bulk. This result is achieved by writing the black [Formula: see text]-brane geometry in a Gaussian null coordinate system which allows us to get a nonsingular near-horizon geometry description. We find that the near-horizon geometry is [Formula: see text] and that the [Formula: see text] section has an internal structure which can be seen as a warped product of [Formula: see text] in Gaussian null coordinates. We show that the bulk scalar field satisfying the field equations is expanded in terms of nonnormalizable and normalizable modes, which for certain suitable quantization conditions are well-behaved at the boundary of [Formula: see text] space. Furthermore, we show that picking the normalizable modes results in the existence of conserved quantities on the horizon. We discuss the impact of these conserved quantities in the late-time regime.

Astronomy & Astrophysics↗