Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “generalization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Flight test and evaluation of Omega navigation for general aviation

A seventy hour flight test program was performed to determine the suitability and accuracy of a low cost Omega navigation receiver in a general aviation aircraft. An analysis was made of signal availability in two widely separated geographic areas. Comparison is made of the results of these flights with other navigation systems. Conclusions drawn from the test experience indicate that developmental system improvement is necessary before a competent fail safe or fail soft area navigation system is offered to general aviation.

Hwoschinsky, P. V.↗

A generalized tensor formulation of atmosphere and seas dynamics

A generalized mathematical model was developed for simulation of the dynamics and transport of both the atmosphere and seas. A nearly horizontal bottom coordinate surface conforms to the land-to-air interface and the sea-floor-to-water interface, which simplifies computations. General vertical motion of the other quasi-horizontal coordinate surfaces is allowed; external gravity waves can be represented by the top coordinate surface, and meteorological fronts and inversion layers in the atmosphere and refractive layers in the seas can be represented with enhanced resolution by the internal quasi-horizontal coordinate surfaces. A tensor reformulation of the standard subgrid mixing theory departs significantly from the standard theory in allowing, as a solution under adiabatic conditions, rigid-body rotation of the atmosphere.

Avis, L. M.↗

General purpose simulation system of the data management system for space shuttle mission 18

The simulation program of the science and engineering data management system for the space shuttle is presented. The programming language used was General Purpose Simulation System V (OS). The data flow was modeled from its origin at the experiments or subsystems to transmission from the space shuttle. Mission 18 was the particular flight chosen for simulation. First, the general structure of the program is presented and the trade studies which were performed are identified. Inputs required to make runs are discussed followed by identification of the output statistics. Some areas for model modifications are pointed out. A detailed model configuration, program listing and results are included.

Bengtson, N. M.↗

Tidal friction and generalized Cassini's laws in the solar system

The tidal drift toward a generalized Cassini state of rotation of the spin axis of a planet or satellite in a precessing orbit is described. Generalized Cassini's laws are applied to several solar system objects and the location of their spin axes estimated. Of those considered only the moon definitely occupies state 2 with the spin axis near to the normal of the invariable plane. Most objects appear to occupy state 1 with the spin axis near to the orbit normal. Iapetus could occupy either state depending on its oblateness. In addition, the resonant rotation of Mercury is found to have little effect on the tidal drift of its spin axis toward state 1.

Ward, W. R.↗

A generalized expression for lag-time in the gas-phase permeation of hollow tubes

A generalized expression for the nonsteady-state parameter, lag-time, has been obtained from Fick's second law for gas-phase transport through hollow, cylindrical membranes. This generalized expression is simplified for three limiting cases of practical interest: (1) diffusion controlled transport, (2) phase boundary reaction control at the inlet surface, and (3) phase boundary reaction control at the outlet surface. In all three cases the lag-time expressions were found to be inversely proportional only to the diffusion coefficient and functionally dependent on the membrane radii. Finally, the lag-time expressions were applied to experimentally obtained lag-time data for alpha-phase titanium and alpha-phase iron.

Shah, K. K.↗

Periodic orbits in the Planar General Three-Body Problem

The article contains a numerical study of periodic solutions of the Planar General Three-Body Problem. Several new periodic solutions have been discovered and are described. In particular, there is a continuous family with variable masses, extending all the way from the elliptic restricted problem to the general problem with three equal masses. All our examples have special symmetry properties which are described in detail. Finally we also suggest some important applications to the natural satellites of the solar system.

Broucke, R.↗

A generalized concept for cost-effective structural design

A generalized concept for cost-effective structural design is introduced. It is assumed that decisions affecting the cost effectiveness of aerospace structures fall into three basic categories: design, verification, and operation. Within these basic categories, certain decisions concerning items such as design configuration, safety factors, testing methods, and operational constraints are to be made. All or some of the variables affecting these decisions may be treated probabilistically. Bayesian statistical decision theory is used as the tool for determining the cost optimum decisions. A special case of the general problem is derived herein, and some very useful parametric curves are developed and applied to several sample structures.

Thomas, J. M.↗

A generalized hyperbolic marching method for chemically reacting 3-D supersonic flow using a splitting technique

A generalized hyperbolic marching method employing a nonorthogonal coordinate system and using a split differencing scheme for calculating steady supersonic flow over aerodynamic shapes is presented. It is a second-order-accurate mixed explicit-implicit procedure that solves the inviscid adiabatic and nondiffusive equations for chemically reacting flow in integral conservation-law form. The relationship between the integral and differential forms of the equations are examined and the relative merits of each discussed. The method admits initial Cauchy data situated on any arbitrary surface and integrates them forward along a general curvilinear coordinate, distorting and deforming the surface as it advances. The chemical kinetics term is split from the convective terms which are themselves dimensionally split, thereby freeing the fluid operators from the restricted step-size imposed by the chemical reactions and increasing the computational efficiency. The accuracy of this splitting technique is analyzed, a sufficient stability criterion is established, and comparisons are made with another method.

Rizzi, A. W.↗

A generalized hyperbolic marching technique for three-dimensional supersonic flow with shocks

The current paper introduces a generalized, nonorthogonal coordinate system for application to supersonic flows with such large angles between streamlines of the initial Cauchy data and the marching direction that the velocity component in the marching direction is actually subsonic. Finite-difference operators are developed to solve the three-dimensional, steady, inviscid conservation equations of fluid flow referenced to this general frame. Moreover, a new method of aligning the difference mesh to the bow shock wave is presented which eliminates both the necessity for differencing the free-stream flow properties and the spurious fluctuations that often arise in conservative variables when they are differenced across the discontinuity. Results are given for the case of flow past a conical surface.

Rizzi, A. W.↗

Human factors in general aviation

The relation of the pilot to the aircraft in general aviation is considered. The human component is analyzed, along with general aviation facilities. The man-machine interface, and the man-environment interface are discussed.

Source record↗

General aviation technology assessment

The existing problem areas in general aviation were investigated in order to identify those which can benefit from technological payoffs. The emphasis was placed on acceptance by the pilot/passenger in areas such as performance, safety, handling qualities, ride quality, etc. Inputs were obtained from three sectors: industry; government; and user, although slanted toward the user group. The results should only be considered preliminary due to the small sample sizes of the data. Trends are evident however and a general methodology for allocating effort in future programs is proposed.

Jacobson, I. D.↗

A review of the NASA V-G/VGH general aviation program

The V-G and VGH data collected from a wide variety of general aviation airplanes since the inception of the NASA V-G/VGH General Aviation Program in 1962 are presented. These data were analyzed to obtain information on the gust and maneuver loads, on the operating practices, and on the effects of different types of operations on these parameters.

Jewel, J. W., Jr.↗

Seasonal changes in the atmospheric heat balance simulated by the GISS general circulation model

Tests of the ability of numerical general circulation models to simulate the atmosphere have focussed so far on simulations of the January climatology. These models generally present boundary conditions such as sea surface temperature, but this does not prevent testing their ability to simulate seasonal changes in atmospheric processes that accompany presented seasonal changes in boundary conditions. Experiments to simulate changes in the zonally averaged heat balance are discussed since many simplified models of climatic processes are based solely on this balance.

Stone, P. H.↗

Wind-tunnel investigation of a Fowler flap and spoiler for an advanced general aviation wing

The wing was tested without fuselage or empennage and was fitted with approximately three-quarter span Fowler flaps and half span spoilers. The spoilers were hinged at the 70 percent chord point and vented when the flaps were deflected. Static longitudinal and lateral aerodynamic data were obtained over an angle of attack range of -8 deg to 22 deg for various flap deflections and positions, spoiler geometries, and vent lip geometries. Lateral characteristics indicate that the spoilers are generally adequate for lateral control. In general, the spoiler effectiveness increases with increasing angle of attack, increases with increasing flap deflections, and is influenced by vent lip geometry. In addition, the data show that some two-dimensional effects on spoiler effectiveness are reduced in the three-dimensional case. Results also indicate significant increase in lift coefficient as the Fowler flaps are deflected; when the flap was fully deflected, the maximum wing lift coefficient was increased about 96 percent.

Paulson, J. W., Jr.↗

Analysis of generalized forces in the singular perturbation equations of motion of flexible satellites

The formulation and existence of a generalized force in the singularly perturbed formulation of flexible satellites is described. The concept of this force sharply reduces the number of degrees of freedom and the equations of motion of satellites with a large number of flexible elements. The force is analyzed to demonstrate its existence and convergence criteria. The complete solution has been obtained in three time zones - the inner boundary layer, the outer boundary layer, and the large time extending beyond these boundary layers. A stability criterion is proposed for this generalized force.

Huang, T. C.↗

Computer technology forecast study for general aviation

A multi-year, multi-faceted program is underway to investigate and develop potential improvements in airframes, engines, and avionics for general aviation aircraft. The objective of this study was to assemble information that will allow the government to assess the trends in computer and computer/operator interface technology that may have application to general aviation in the 1980's and beyond. The current state of the art of computer hardware is assessed, technical developments in computer hardware are predicted, and nonaviation large volume users of computer hardware are identified.

Seacord, C. L.↗

Forecast of the general aviation air traffic control environment for the 1980's

The critical information required for the design of a reliable, low cost, advanced avionics system which would enhance the safety and utility of general aviation is stipulated. Sufficient data is accumulated upon which industry can base the design of a reasonably priced system having the capability required by general aviation in and beyond the 1980's. The key features of the Air Traffic Control (ATC) system are: a discrete address beacon system, a separation assurance system, area navigation, a microwave landing system, upgraded ATC automation, airport surface traffic control, a wake vortex avoidance system, flight service stations, and aeronautical satellites. The critical parameters that are necessary for component design are identified. The four primary functions of ATC (control, surveillance, navigation, and communication) and their impact on the onboard avionics system design are assessed.

Hoffman, W. C.↗

Evaluation of several navigation algorithms for application to general aviation

Using data obtained in flight, three position determining algorithms for use by general aviation aircraft were evaluated representing increasing software requirements. These were a DME only, DME/air data and blended DME/air data. Although each step represented additional software with resultant increase in position accuracy, all could be performed on a programmable electronic desk calculator. Results from the computation of aircraft position using the three algorithms are presented. The algorithms employed can be extended to accept VOR, TACAN bearing, ADF, or other NAVAID Data. To obtain the flight data an experimental system was configured and flown on a general aviation aircraft. Principal hardware elements (all with low-cost potential) were a programmable calculator, a single DME receiver (multiplexed for multiple DME use) and a low-cost air speed sensor (shed-vortex principle). The flight test demonstrated satisfactory performance of these principal elements.

Conrad, B.↗