Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “force”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Fabrication of oriented crystals as force measurement tips via focused ion beam and microlithography methods

Detailed knowledge of the forces between nanocrystals is very crucial for understanding many generic (e.g., random aggregation/assembly and rheology) and specific (e.g., oriented attachment) phenomena at macroscopic length scales, especially considering the additional complexities involved in nanocrystals such as crystal orientation and corresponding orientation-dependent physicochemical properties. Because there are a limited number of methods to directly measure the forces, little is known about the forces that drive the various emergent phenomena. Here we report on two methods of preparing crystals as force measurement tips used in an atomic force microscope (AFM): the focused ion beam method and microlithography method. The desired crystals are fabricated using these two methods and are fixed to the AFM probe using platinum deposition, ultraviolet epoxy, or resin, which allows for the orientation-dependent force measurements. These two methods can be used to attach virtually any solid particles (from the size of a few hundreds of nanometers to millimeters). We demonstrate the force measurements between aqueous media under different conditions such as pH.

Environmental Molecular Sciences Laboratory↗

Seasonal delay of Sahelian rainfall driven by an east–west contrast in radiative forcing in idealized CESM experiments

Recent studies suggest the observed seasonal delay of rainfall over the Sahel is mainly driven by anthropogenic aerosol forcing, which features a robust east–west contrasting changes in recent decades, with negative and positive top-of-the-atmosphere shortwave radiative forcing in South and East Asia (SA&EA) and in North America and Europe (NA&EU), respectively. Their individual effects on the Sahel rainfall annual cycle remain unclear. Here, by designing idealized sensitivity experiments based on Community Earth System Model (CESM1.2), we show that both negative radiative forcing over SA&EA and positive radiative forcing over NA&EU contribute to the delayed phase and enhanced amplitude of Sahel rainfall annual cycle. To understand the underlying physical processes, both the convective quasi-equilibrium (CQE) and atmospheric energetic frameworks are utilized. Both frameworks can well explain the seasonal delay in the rainfall annual cycle over the Sahel under the regional radiative forcings, with the CQE framework showing stronger explanatory power. Based on the insights from both frameworks, we conducted a moisture budget analysis and found that the negative radiative forcing over SA&EA causes an anomalous low-level anticyclonic circulation, which transports more moisture to the Sahel. As the anomalous anticyclone is stronger in summer and fall compared to spring, rainfall is delayed in the Sahel. Further, under the influence of the positive radiative forcing over NA&EU, more warming in the northern hemisphere causes northward transport of moisture to the northern tropics associated with the cross-equatorial transport of energy. The moisture transport increases relativehumidity over the Sahel and enhances the effective atmospheric heat capacity that delays the seasonal rainfall.

54 ENVIRONMENTAL SCIENCES↗

Impact of peptide clustering on unbinding forces in the context of fusion mimetics

Highlights: ► Coiled-coil peptides as SNARE mimetics for membrane fusion. ► Interaction forces assessed by colloidal probe microscopy. ► Lateral organization of lipopeptides visualized by atomic force microscopy. -- Abstract: Coiled-coil zipping and unzipping is a pivotal process in SNARE-regulated membrane fusion. In this study we examine this process mediated by a minimal model for coiled-coil formation employing force spectroscopy in the context of membrane-coated surfaces and probes. The interaction forces of several hundred pN are surprisingly low considering the proposed amount of molecular bonds in the contact zone. However, by means of high-resolution imaging employing atomic force microscopy and studying the lateral mobility of lipids and peptides as a function of coiled-coil formation, we are able to supply a detailed view on processes occurring on the membrane surfaces during force measurements. The interaction forces determined here are not only dependent on the peptide concentration on the surface, but also on the regional organization of lateral peptide clusters found prior to coiled-coil formation.

60 APPLIED LIFE SCIENCES↗

Understanding Rapid Adjustments to Diverse Forcing Agents

Rapid adjustments are responses to forcing agents that cause a perturbation to the top of atmosphere energy budget but are uncoupled to changes in surface warming. Different mechanisms are responsible for these adjustments for a variety of climate drivers. These remain to be quantified in detail. It is shown that rapid adjustments reduce the effective radiative forcing (ERF) of black carbon by half of the instantaneous forcing, but for CO 2 forcing, rapid adjustments increase ERF. Competing tropospheric adjustments for CO 2 forcing are individually significant but sum to zero, such that the ERF equals the stratospherically adjusted radiative forcing, but this is not true for other forcing agents. Additional experiments of increase in the solar constant and increase in CH 4 are used to show that a key factor of the rapid adjustment for an individual climate driver is changes in temperature in the upper troposphere and lower stratosphere.

58 GEOSCIENCES↗

Benchmark calculations of radiative forcing by greenhouse gases

Changes in concentrations of greenhouse gases lead to changes in radiative fluxes throughout the atmosphere. The value of this change, the instantaneous radiative forcing, varies across climate models, due partly to differences in the distribution of clouds, humidity, and temperature across models, and partly due to errors introduced by approximate treatments of radiative transfer. This paper describes an experiment within the Radiative Forcing Model Intercomparision Project that uses benchmark calculations made with line–by–line models to identify parameterization error in the representation of absorption and emission by greenhouse gases. Clear–sky instantaneous forcing by greenhouse gases is computed using a set of 100 profiles, selected from a re–analysis of present–day conditions, that represent the global annual mean forcing from pre–industrial times to the present–day with sampling errors of less than 0.01 W m –2 . Six contributing line–by–line models agree in their estimate of this forcing to within 0.025 W m –2 while even recently–developed parameterizations have typical errors four or more times larger, suggesting both that the samples reveal true differences among line–by–line models and that parameterization error will be readily identifiable. Agreement among line–by–line models is better in the longwave than in the shortwave where differing treatments of the water vapor vapor continuum affect estimates of forcing by carbon dioxide and methane. The impacts of clouds on instantaneous radiative forcing are estimated from climate model simulations. Here, the adjustment due to stratospheric temperature change by assuming fixed dynamical heating. Adjustments are large only for ozone and for carbon dioxide, for which stratospheric cooling introduces modest non–linearity.

54 ENVIRONMENTAL SCIENCES↗

Accurate noncontact calibration of colloidal probe sensitivities in atomic force microscopy

The absolute force sensitivities of colloidal probes comprised of atomic force microscope, or AFM, cantilevers with microspheres attached to their distal ends are measured. The force sensitivities are calibrated through reference to accurate electrostatic forces, the realizations of which are described in detail. Furthermore, the absolute accuracy of a common AFM force calibration scheme, known as the thermal noise method, is evaluated. It is demonstrated that the thermal noise method can be applied with great success to colloidal probe calibration in air and in liquid to yield force measurements with relative standard uncertainties below 5%. Techniques to combine the electrostatics-based determination of the AFM force sensitivity with measurements of the colloidal probe's thermal noise spectrum to compute noncontact estimates of the displacement sensitivity and spring constant are also developed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Calculation of electromagnetic force in electromagnetic forming process of metal sheet

Electromagnetic forming (EMF) is a forming process that relies on the inductive electromagnetic force to deform metallic workpiece at high speed. Calculation of the electromagnetic force is essential to understand the EMF process. However, accurate calculation requires complex numerical solution, in which the coupling between the electromagnetic process and the deformation of workpiece needs be considered. In this paper, an appropriate formula has been developed to calculate the electromagnetic force in metal work-piece in the sheet EMF process. The effects of the geometric size of coil, the material properties, and the parameters of discharge circuit on electromagnetic force are taken into consideration. Through the formula, the electromagnetic force at different time and in different positions of the workpiece can be predicted. The calculated electromagnetic force and magnetic field are in good agreement with the numerical and experimental results. The accurate prediction of the electromagnetic force provides an insight into the physical process of the EMF and a powerful tool to design optimum EMF systems.

30 DIRECT ENERGY CONVERSION↗

Unfolding of globular polymers by external force

We examine the problem of a polymer chain, folded into a globule in poor solvent, subjected to a constant tensile force. Such a situation represents a Gibbs thermodynamic ensemble and is useful for analysing force-clamp atomic force microscopy measurements, now very common in molecular biophysics. Using a basic Flory mean-field theory, we account for surface interactions of monomers with solvent. Under an increasing tensile force, a first-order phase transition occurs from a compact globule to a fully extended chain, in an “all-or-nothing” unfolding event. This contrasts with the regime of imposed extension, first studied by Halperin and Zhulina [Europhys. Lett. 15, 417 (1991)], where there is a regime of coexistence of a partial globule with an extended chain segment. We relate the transition forces in this problem to the solvent quality and degree of polymerisation, and also find analytical expressions for the energy barriers present in the problem. Using these expressions, we analyse the kinetic problem of a force-ramp experiment and show that the force at which a globule ruptures depends on the rate of loading.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bifurcation, chaos, and scan instability in dynamic atomic force microscopy

The dynamical motion at any point on the cantilever of an atomic force microscope can be expressed quite generally as a superposition of simple harmonic oscillators corresponding to the vibrational modes allowed by the cantilever shape. Central to the dynamical equations is the representation of the cantilever-sample interaction force as a polynomial expansion with coefficients that account for the interaction force “stiffness,” the cantilever-to-sample energy transfer, and the displacement amplitude of cantilever oscillation. Renormalization of the cantilever beam model shows that for a given cantilever drive frequency cantilever dynamics can be accurately represented by a single nonlinear mass-spring model with frequency-dependent stiffness and damping coefficients [S. A. Cantrell and J. H. Cantrell, J. Appl. Phys. 110, 094314 (2011)]. Application of the Melnikov method to the renormalized dynamical equation is shown to predict a cascade of period doubling bifurcations with increasing cantilever drive force that terminates in chaos. The threshold value of the drive force necessary to initiate bifurcation is shown to depend strongly on the cantilever setpoint and drive frequency, effective damping coefficient, nonlinearity of the cantilever-sample interaction force, and the displacement amplitude of cantilever oscillation. The model predicts the experimentally observed interruptions of the bifurcation cascade for cantilevers of sufficiently large stiffness. Operational factors leading to the loss of image quality in dynamic atomic force microscopy are addressed, and guidelines for optimizing scan stability are proposed using a quantitative analysis based on system dynamical parameters and choice of feedback loop parameter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reduction of asymmetric wall force in ITER disruptions with fast current quench

One of the problems caused by disruptions in tokamaks is the asymmetric electromechanical force produced in conducting structures surrounding the plasma. The asymmetric wall force in ITER asymmetric vertical displacement event (AVDE) disruptions is calculated in nonlinear 3D MHD simulations. It is found that the wall force can vary by almost an order of magnitude, depending on the ratio of the current quench time to the resistive wall magnetic penetration time. In ITER, this ratio is relatively low, resulting in a low asymmetric wall force. In JET, this ratio is relatively high, resulting in a high asymmetric wall force. Previous extrapolations based on JET measurements have greatly overestimated the ITER wall force. Here, it is shown that there are two limiting regimes of AVDEs, and it is explained why the asymmetric wall force is different in the two limits.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Physics-based, neural network force fields for reactive molecular dynamics: Investigation of carbene formation from [EMIM + ][OAc - ]

Reactive molecular dynamics simulations enable detailed understanding of solvent effects on chemical reaction mechanisms and reaction rates. While classical molecular dynamics using reactive force fields allows significantly longer simulation time scales and larger system sizes compared with ab initio molecular dynamics, constructing reactive force fields is a difficult and complex task. In this work, we describe a general approach following the Empirical Valence Bond (EVB) framework for constructing ab initio reactive force fields for condensed phase simulations by combining physics-based methods with neural networks (PB/NN). The physics-based terms ensure correct asymptotic behavior of electrostatic, polarization, and dispersion interactions, and are compatible with existing solvent force fields. Neural networks are utilized for versatile description of short-range orbital interactions within the transition state region, and accurate rendering of vibrational motion of the reacting complex. Herein, we demonstrate our methodology for a simple deprotonation reaction of the 1-ethyl-3-methylimidazolium (EMIM+) cation with acetate to form 1-ethyl- 3-methylimidazol-2-ylidene and acetic acid. Our PB/NN force field exhibits ~ 1 kJ/mol MAE accuracy within the transition state region for the gas-phase complex. To characterize solvent modulation of the reaction profile, we compute potentials of mean force (PMFs) for the gas-phase reaction as well as the reaction within a four ion cluster, and benchmark against ab initio molecular dynamics simulations. We find that the surrounding ionic environment significantly destabilizes formation of the carbene product, and we show that this effect is accurately captured by the reactive force field. By construction, the PB/NN potential may be directly employed for simulations of other solvents/chemical environments without additional parameterization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Assessing models of force-dependent unbinding rates via infrequent metadynamics

Protein–ligand interactions are crucial for a wide range of physiological processes. Many cellular functions result in these non-covalent “bonds” being mechanically strained, and this can be integral to proper cellular function. Broadly, two classes of force dependence have been observed—slip bonds, where the unbinding rate increases, and catch bonds, where the unbinding rate decreases. Despite much theoretical work, we cannot predict for which protein–ligand pairs, pulling coordinates, and forces a particular rate dependence will appear. Here, we assess the ability of MD simulations combined with enhanced sampling techniques to probe the force dependence of unbinding rates. We show that the infrequent metadynamics technique correctly produces both catch and slip bonding kinetics for model potentials. We then apply it to the well-studied case of a buckyball in a hydrophobic cavity, which appears to exhibit an ideal slip bond. Finally, we compute the force-dependent unbinding rate of biotin–streptavidin. Here, the complex nature of the unbinding process causes the infrequent metadynamics method to begin to break down due to the presence of unbinding intermediates, despite the use of a previously optimized sampling coordinate. Allowing for this limitation, a combination of kinetic and free energy computations predicts an overall slip bond for larger forces consistent with prior experimental results although there are substantial deviations at small forces that require further investigation. Furthermore, this work demonstrates the promise of predicting force-dependent unbinding rates using enhanced sampling MD techniques while also revealing the methodological barriers that must be overcome to tackle more complex targets in the future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Climate and carbon budget implications of linked future changes in CO 2 and non-CO 2 forcing

The approximate proportional relationship between cumulative carbon emissions and instantaneous global temperature rise (the carbon budget approximation) has proven to be a useful concept to translate policy-relevant temperature objectives into CO 2 emissions pathways. However, when non-CO 2 forcing is changing along with CO 2 forcing, errors in the approximation increases. Using the GCAM model to produce an ensemble of ~3000 scenarios, we show that linked changes in CO 2 forcing, aerosol forcing, and non-CO 2 greenhouse gas (GHG) forcing lead to an increase in total non-CO 2 forcing over the 21st century across mitigation scenarios. This increase causes the relationship between instantaneous temperature and cumulative CO 2 emissions to become more complex than the proportional approximation often assumed, particularly for low temperature objectives such as 1.5 °C. The same linked changes in emissions also contribute to a near-term increase in aerosol forcing that effectively places a limit on how low peak temperature could be constrained through GHG mitigation alone. In particular, we find that 23% of scenarios that include CCS (but only 1% of scenarios that do not include CCS) achieve a temperature objective of 1.5 °C without temperature overshoot.

54 ENVIRONMENTAL SCIENCES↗

Gogny-force-derived effective shell-model Hamiltonian

The density-dependent finite-range Gogny force has been used to derive the effective Hamiltonian for the shell-model calculations of nuclei. The density dependence simulates an equivalent three-body force, while the finite range gives a Gaussian distribution of the interaction in the momentum space and hence leads to an automatic smooth decoupling between low-momentum and high-momentum components of the interaction, which is important for finite-space shell-model calculations. Two-body interaction matrix elements, single-particle energies, and the core energy of the shell model can be determined by the unified Gogny force. The analytical form of the Gogny force is advantageous to treat cross-shell cases, while it is difficult to determine the cross-shell matrix elements and single-particle energies using an empirical Hamiltonian by fitting experimental data with a large number of matrix elements. In this paper, we have applied the Gogny-force effective shell-model Hamiltonian to the p- and sd-shell nuclei. The results show good agreements with experimental data and other calculations using empirical Hamiltonians. The experimentally known neutron drip line of oxygen isotopes and the ground states of typical nuclei 10B and 18N can be reproduced, in which the role of three-body force is non-negligible. Here, the Gogny-force-derived effective Hamiltonian has also been applied to the cross-shell calculations of the sd–pf shell.

20 ≤ A ≤ 38↗

Rigorous derivation of electromagnetic self-force

During the past century, there has been considerable discussion and analysis of the motion of a point charge in an external electromagnetic field in special relativity, taking into account 'self-force' effects due to the particle's own electromagnetic field. We analyze the issue of 'particle motion' in classical electromagnetism in a rigorous and systematic way by considering a one-parameter family of solutions to the coupled Maxwell and matter equations corresponding to having a body whose charge-current density J{sup a}({lambda}) and stress-energy tensor T{sub ab}({lambda}) scale to zero size in an asymptotically self-similar manner about a worldline {gamma} as {lambda}{yields}0. In this limit, the charge, q, and total mass, m, of the body go to zero, and q/m goes to a well-defined limit. The Maxwell field F{sub ab}({lambda}) is assumed to be the retarded solution associated with J{sup a}({lambda}) plus a homogeneous solution (the 'external field') that varies smoothly with {lambda}. We prove that the worldline {gamma} must be a solution to the Lorentz force equations of motion in the external field F{sub ab}({lambda}=0). We then obtain self-force, dipole forces, and spin force as first-order perturbative corrections to the center-of-mass motion of the body. We believe that this is the first rigorous derivation of the complete first-order correction to Lorentz force motion. We also address the issue of obtaining a self-consistent perturbative equation of motion associated with our perturbative result, and argue that the self-force equations of motion that have previously been written down in conjunction with the 'reduction of order' procedure should provide accurate equations of motion for a sufficiently small charged body with negligible dipole moments and spin. (There is no corresponding justification for the non-reduced-order equations.) We restrict consideration in this paper to classical electrodynamics in flat spacetime, but there should be no difficulty in extending our results to the motion of a charged body in an arbitrary globally hyperbolic curved spacetime.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Structural Analysis of the SHMS Cosine Theta Superconducting Dipole Force Collar

Jefferson Laboratory is developing a set of innovative superconducting magnets for the 12 GeV upgrade in JLAB Hall C. Here, we will report on the finite element analysis (FEA) of the force collar for the Super High Momentum Spectrometer Cosine Theta Dipole magnet. The force collar is designed with an interference fit and intended to provide enough pressure after cool down to operating temperature to counteract Lorentz forces acting on the dipole coil during operation. By counteracting the Lorentz forces and keeping the coil pack in overall compression, movement of the coils is expected to be minimized. The dimensional geometry of the cold mass is maintained in the commercial solid modeling code UG/I-DEAS while the magnetic field design is maintained in the commercial TOSCA code from Vector Fields. The three dimensional FEA was conducted in the commercial codes ANSYS and IDEAS. The method for converting the models and calculating the loads transferred to the structure is discussed. The results show the cold mass response to: force collar assembly preload, differential thermal contraction, and operational Lorentz loads. Evaluations are made for two candidate force collar materials and two candidate force collar designs.

43 PARTICLE ACCELERATORS↗

Evaluating Climate Model Simulations of the Radiative Forcing and Radiative Response at Earth’s Surface

In this work, we analyze the radiative forcing and radiative response at Earth’s surface, where perturbations in the radiation budget regulate the atmospheric hydrological cycle. By applying a radiative kernel-regression technique to CMIP5 climate model simulations where CO 2 is instantaneously quadrupled, we evaluate the intermodel spread in surface instantaneous radiative forcing, radiative adjustments to this forcing, and radiative responses to surface warming. The cloud radiative adjustment to CO 2 forcing and the temperature-mediated cloud radiative response exhibit significant intermodel spread. In contrast to its counterpart at the top of the atmosphere, the temperature-mediated cloud radiative response at the surface is found to be positive in some models and negative in others. Also, the compensation between the temperature-mediated lapse rate and water vapor radiative responses found in top-of-atmosphere calculations is not present for surface radiative flux changes. Instantaneous radiative forcing at the surface is rarely reported for model simulations; as a result, intermodel differences have not previously been evaluated in global climate models. We demonstrate that the instantaneous radiative forcing is the largest contributor to intermodel spread in effective radiative forcing at the surface. We also find evidence of differences in radiative parameterizations in current models and argue that this is a significant, but largely overlooked, source of bias in climate change simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

FORCED FIELD EXTRAPOLATION OF THE MAGNETIC STRUCTURE OF THE H α FIBRILS IN THE SOLAR CHROMOSPHERE

We present a careful assessment of forced field extrapolation using the Solar Dynamics Observatory /Helioseismic and Magnetic Imager magnetogram. We use several metrics to check the convergence property. The extrapolated field lines below 3600 km appear to be aligned with most of the H α fibrils observed by the New Vacuum Solar Telescope. In the region where magnetic energy is far larger than potential energy, the field lines computed by forced field extrapolation are still consistent with the patterns of H α fibrils while the nonlinear force-free field results show a large misalignment. The horizontal average of the lorentz force ratio shows that the forced region where the force-free assumption fails can reach heights of 1400–1800 km. The non-force-free state of the chromosphere is also confirmed based on recent radiation magnetohydrodynamics simulations.

79 ASTRONOMY AND ASTROPHYSICS↗