Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron microscope”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Analysis of suspended solids by single-particle scattering

Light scattering by individual particulates is used in a multiple-detector system to categorize the composition of suspended solids in terms of broad particulate categories. The scattering signatures of red clay and taconite tailings, the two primary particulate contaminants in western Lake Superior, along with two types of asbestiform fibers, amphibole and chrysolite, were studied in detail. A method was developed to predict the concentration of asbestiform fibers in filtration plant samples for which electron microscope analysis was done concurrently. Fiber levels as low as 50,000 fibers/liter were optically detectable. The method has application in optical categorization of samples for remote sensing purposes and offers a fast, inexpensive means for analyzing water samples from filtration plants for specific particulate contaminants.

Diehl, S. R.↗
NASA NTRS1978

Chemical and structural studies of 'Brownlee' particles

Several techniques were applied to the study of small particles (around 10 microns) collected in the upper atmosphere by U-2 aircraft. The major element chemistry of roughly 1/3 of the particles is similar to that of chondritic meteorites, although considerable variation of element ratios is observed from particle to particle, and even within a given particle. All particles of 'chondritic' composition are polycrystalline aggregates. About half have fully re-entrant structures; the remaining ones have more compact structures ranging from platey to spherical morphologies. Micro-crystallites with various internal structures are observed in the size range from less than 100 A to several microns. Although tracks are clearly observed in transmission electron microscope examination of terrestrial analog crystals, no tracks of solar flare origin have yet been identified in the U-2 particles. Induced fission track analysis of one aggregate shows that the U concentration is less than 15 ppbm, lending support to the extraterrestrial origin hypothesis.

Flynn, G. J.↗
NASA NTRS1978

Mineralogy, textures and mode of formation of a hibonite-bearing Allende inclusion

The origin of a Type A, hibonite-rich, coarse-grained inclusion is investigated with the electron microprobe and petrographic and scanning electron microscopes. The primary phases are hibonite, rhonite, Ti-Al-pyroxene, spinel, perovskite and melilite. Evidence for the crystallization of the bulk of the primary phases, hibonite and melilite, from a melt is lacking, suggesting that they may have condensed directly from a solar nebular gas instead. Primary phases were intensely altered during a later condensation event which deposited grossular, anorthite, nepheline and wollastonite in veins and cavities. Four or five condensate rims were deposited as successive layers on the outside of the inclusion. From inside to outside, they consist of perovskite + spinel, nepheline + anorthite, Ti-Al-pyroxene + diopside, hedenbergite + or - wollastonite + or - andradite and, finally, prisms of diopside and hedenbergite with wollastonite and andradite. Reverse zoning in melilite; alteration phases and rim phases, which are not stable condensates from a gas of solar composition; and details of the sequence of rim condensates all suggest that the entire condensation history of this inclusion was interrupted by changes in pressure and/or temperature and/or gas phase composition.

Allen, J. M.↗
NASA NTRS1979

Analysis of the interaction of an electron beam with a solar cell. III - The effect of spacial variations of the number density of recombination centers on SEM measurements

By means of an exactly soluble model the short circuit current generated by a scanning electron microscope in a P-N junction has been determined in cases where the trap density is inhomogeneous. The diffusion length for minority carriers becomes then dependent on the spacial coordinates. It is shown that in this case the dependence of the Isc on characteristic parameters as cell thickness, distance of the beam excitation spot from ohmic contacts, etc., becomes very intricate. This fact precludes the determination of the local diffusion length in the usual manner. Although the model is somewhat simplified in order to make it amenable to exact solutions, it is nevertheless realistic enough to lead to the conclusion that SEM measurements of bulk transport parameters in inhomogeneous semiconductor material are impractical since they may lead to serious errors in the interpretation of the data by customary means.

Von Roos, O.↗
NASA NTRS1980

Crossed-grid charge locator

Circuit locates center of cloud of charge on wire grid to within 6.5 micrometers. Wires in vicinity of charge cloud develop voltages that are processed by priority encoders to develop coarse and fine position codes. Device is used with microchannel plate amplifier in X-ray photon detectors, electron microscopes, and closed-circuit television.

Harrison, D. C.↗
NASA NTRS1980

Fracture modes of high modulus graphite/epoxy angleplied laminates subjected to off-axis tensile loads

Angelplied laminates of high modulus graphite fiber/epoxy were studied in several ply configurations at various tensile loading angles to the zero ply direction in order to determine the effects of ply orientations on tensile properties, fracture modes, and fracture surface characteristics of the various plies. It was found that fracture modes in the plies of angleplied laminates can be characterized by scanning electron microscope observation. The characteristics for a given fracture mode are similar to those for the same fracture mode in unidirectional specimens. However, no simple load angle range can be associated with a given fracture mode.

Sinclair, J. H.↗
NASA NTRS1979

Thermographic measurement of fatigue damage

The paper presents a thermographic technique developed to measure the extent of fatigue damage in composite materials during fatigue loading. It is noted that heat generated by cyclic loading of fatigue damaged material raises the surface temperature. These temperatures were measured with an infrared camera and were used as boundary conditions in a finite element heat transfer program, which has been developed especially to calculate the extent of the heat generation zone, and thereby to define the fatigue damage zone. It is reported that the finite element program was verified by comparing calculated heat generation with the actual heat generation for a simple heat transfer problem that had a closed form solution. Damage zones are calculated for several boron/epoxy fatigue specimens from thermograms of specimens. The calculated damage zones were compared with damage detected by C-scan, X-ray, and scanning electron microscope (SEM) examinations. It is concluded that the analysis was effective in locating the boundaries of the fatigue damage zones.

Whitcomb, J. D.↗
NASA NTRS1979

Investigations of submicron sized metal particles in glass coatings of lunar breccia 15286

Almost all the submicron metal particles in the glass coating of breccia 15286 are rounded and contain two phases, metal and sulfide (FeS). The Ni content of the metal phase as determined by scanning transmission electron microscope X-ray analysis ranged from 9.4 to 15.5 wt %. The sulfide was nearly stoichiometric troilite containing up to 1.3 wt % Ni. The close chemical and microstructural similarities between the coarse (greater than 1-micron) and the submicron sized metal indicate a common origin probably as meteoritic debris. Metal-silicate melt experiments under controlled oxygen partial pressured indicate that the metal particles may have formed from a fine dispersion of immiscible metal-sulfide droplets into an impact-generated silicate melt.

Mehta, S.↗
NASA NTRS1980

Fracture modes of high modulus graphite/epoxy angleplied laminates subjected to off-axis tensile loads

Angleplied laminates of high modulus graphite fiber/epoxy were examined in several ply configurations at various tensile loading angles to the zero ply direction to determine the effects of ply orientations on tensile properties, fracture modes, and fracture surface characteristics of the various plies. Experimental results consist of stress-strain data, selected plots, fracture stresses and strains, and scanning electron microscope (SEM) photographs of fracture surfaces. It was found that the stress-strain curves were linear to fracture, and that although fracture surface characteristics for a given fracture mode are similar to those for the same fracture mode in uniaxial specimens, no simple load angle range can be associated with a given fracture mode. It was also concluded that SEM results must be supplemented with ply stress calculations in order to identify ranges of fracture modes occurring as a function of ply orientation with respect to the load direction.

Sinclair, J. H.↗
NASA NTRS1980

Examples of realistic aerosol particles collected in a cascade impactor

In this paper some scanning electron microscope photomicrographs showing examples of a variety of particulate aerosol shapes are presented. Compositions of particles also are presented. These particles represent samples from a number of different sources and locations including: solid propellant rocket motor plumes, active volcano plumes, the lower stratosphere over Sondrestrom, Greenland, and the upper troposphere over northern Texas. The particles were collected from aboard an aircraft with a cascade impactor which classified them according to aerodynamic size into 10 size intervals ranging from submicron to greater than 25 micrometers in diameter. The cascade impactor also served to measure the mass concentration as a function of particle size. The variety of shapes and compositions found among these particles suggest difficulties in obtaining reliable size distribution data from light scattering measurements.

Woods, D. C.↗
NASA NTRS1980

Ultrastructural studies of the mitochondriae in the striated muscles of birds with regard to experimental hypokinesis

Electron microscopic studies were carried out on the mitochrondria of the transversely striated muscles with regard to experimental hypokinesia. As compared to the central group the mitochondria of m. pectoralis thoracicus and the m. iliotibialis posterior in hypokinetic birds reveal marked changes. In filamentous and ovoid mitochondria, vacuoles can be observed which in some cases produced larger light formations with following disappearance of the cristae and destruction of mitochondria. Fat particles located at the poles of the altered mitochondria, sporadically occurring also laterally, presented another finding. The Z-lines of the sarcomere did not form a continuous line, but were somewhat shifted.

Belak, M.↗
NASA NTRS1980

Particle behavior in solid propellant rockets

The use of holography, high speed motion pictures, light scattering measurements, and post-fire particle collection/scanning electron microscopic examination to study the combustion of composite solid propellants is discussed. The relative advantages and disadvantages of the different experimental techniques for obtaining two-phase flow characteristics within the combustion environment of a solid propellant grain are evaluated. Combustion bomb studies using high speed motion pictures and post-fire residue analysis were completed for six low metal content propellants. Resolution capabilities and the relationships between post-fire residue and motion picture data are determined. Initial testing using a holocamera together with a 2D windowed motor is also described.

Netzer, D. W.↗
NASA NTRS1981

A cause of the non-solderability of ceramic capacitor terminations

The results of an analysis into the cause of the non-solderability of multiple defective part lots from two capacitor manufacturers are described. This analysis consisted of visual, scanning electron microscopic, surface, and metalographic examinations and analyses. The results indicated that non-solderability results from areas of excess porosity in the termination which are caused by segregation of ink constituents during manufacturing. This segregation can be minimized by proper monitoring and control of process variables; where excess porosity does occur, solderability can be improved by proper precleaning of parts.

Cozzolino, M. J.↗
NASA NTRS1981

Reaction by the rat hypothalamus-hypophyseal system to stress from immobilization

Cytophysical changes in the ultrastructure of the neurosecretory hypothalamus under conditions of total short term immobility and partial long term immobility are investigated. Electron microscope morphological studies revealed a stimulatory response of the hypothalamus hypophyseal system of the rat brain to stress produced by immobilization. Total immobilization for two days resulted in changes in the neurons of the supraoptical and paraventricular nuclei and in the fibers of the neurohypophysis indicating an increased production of neurosecretory granules, their rapid flow and enhanced secretion to the blood. Partial immobilization of the animals for 3 weeks produced changes of a somewhat different character and of weaker intensity, which may be considered as a manifestation of the adaptation of the system and of the whole organism to the changed condition.

Gajkowska, B.↗
NASA NTRS1981

The Structure and Properties of Diffusion Assisted Bonded Joints in 17-4 PH, Type 347, 15-5 PH and Nitronic 40 Stainless Steels

Diffusion assisted bonds are formed in 17-4 PH, 15-5 PH, type 347 and Nitronic 40 stainless steels using electrodeposited copper as the bonding agent. The bonds are analyzed by conventional metallographic, electron microprobe analysis, and scanning electron microscopic techniques as well as Charpy V-notch impact tests at temperatures of 77 and 300 K. Results are discussed in terms of a postulated model for the bonding process.

Wigley, D. A.↗
NASA NTRS1981

Experiment K305: Quantitative analysis of selected bone parameters. Supplement 3B: Mineralization in the long bones

Electron microscope and optical birefringent studies of growth plates and metaphyseal trabeculae are described. The type and functional state of bone cells were investigated and the zone of calcification of the cartilagenous growth plate, particularly the presence and condition of matrix vesicles, was characterized. Trabecular number, size, and orientation were assessed. Comparisons with a control group, indicating changes resulting from a zero gravity situation, are presented.

Matthews, J. L.↗
NASA NTRS1981

The matrices of unequilibrated ordinary chondrites - Implications for the origin and history of chondrites

The matrices of 16 unequilibrated chondrites were examined by optical microscopy, an electron microprobe, and a scanning electron microscope. The fine-grained, opaque, silicate matrix of type 3 unequilibrated chondrites was compositionally, mineralogically, and texturally different from the chondrules and their fragments; it may be the low temperature condensate proposed by Larimer and Anders (1967, 1970). Each meteorite has been metamorphosed by a combination of processes including thermal metamorphism and the passage of shock waves; the appearance of each chondrite results from the temperature and pressure conditions which formed it, and subsequent metamorphic alterations.

Huss, G. R.↗
NASA NTRS1980

Microcrack closure in rocks under stress - Direct observation

Direct observations of the closure of microcracks in rocks under increasing stress are reported. Uniaxial stresses up to 300 bars were applied to untreated and previously heated samples of Westerly granite and Frederick diabase by a small hydraulic press which fit entirely within a scanning electron microscope. Crack closure characteristics are found to depend on crack orientation, with cracks perpendicular to the applied stress closing and those parallel tending to open, as well as crack aspect ratio, crack intersection properties, stress concentrations and surface roughness. Uniaxial and hydrostatic stress measurements are found to be strongly dependent on fracture content as observed by SEM, and the observed hysteresis in strain measurements in the first stress cycles is also related to microscopic processes

Batzle, M. L.↗