Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “elastic crystal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Effect of interfacial structures on phonon transport across atomically precise Si/Al heterojunctions

Phonons are important carriers of energy and information in many cryogenic devices used for quantum information science and in fundamental physics experiments such as dark matter detectors. In these systems phonon behavior can be dominated by interfaces, hence there is increasing demand for a more detailed understanding of interfacial phonon transport in relevant material systems. Previous studies have focused on understanding thermal transport over the entire phonon spectrum at and above room temperature. At ultra-low temperatures, however, knowledge is missing regarding athermal phonon behavior due to the challenge in modeling the extreme conditions in micro-scale, heterogeneous cryogenic systems, as well as extracting single-phonon information from a large ensemble. In this work, we delineate interfacial phonon transport using a combination of classical molecular dynamics (MD) and phonon wave packet simulations, to illustrate the consistency and differences between the ensemble- and single-phonon dynamics. We consider three single-crystal Si surface reconstructions --- (1×1), (v3×v3) and (7×7) --- and model both experimentally observed Si(1×1)/Al interfaces and hypothesized Si(v3×v3)/Al and Si(7×7)/Al interfaces. The overall interfacial thermal conductance calculated from non-equilibrium MD shows that for the Si(1×1)/Al system, the presence of Al twin grain boundaries can hinder phonon transport and reduce thermal conductance by 2--12% relative to single-crystal Al; whereas the Si (v3×v3) and (7×7) reconstructions can enhance it by 6--19%. Normal mode decomposition reveals that both the increase and decrease in conductance are related to inelastic phonon scattering. Single-phonon wave packet simulations show results consistent with NEMD, while further suggesting that phonon polarization conversion is significant even when elastic transmission dominates, and that the interfacial structures have anisotropic impacts on atomic vibrations along different lattice directions. Our findings suggest alternative perspectives in achieving selective phonon transport through controlling interfacial structures of materials with atomically-precise fabrication techniques, and that the phonon wave packet formalism is a potentially powerful method for developing a detailed understanding of non-equilibrium phenomena in the low-temperature limit.

Lu, Zexi↗
DOE OSTI2020

Topology control of human fibroblast cells monolayer by liquid crystal elastomer

Eukaryotic cells in living tissues form dynamic patterns with spatially varying orientational order that affects important physiological processes such as apoptosis and cell migration. The challenge is how to impart a predesigned map of orientational order onto a growing tissue. Here, we demonstrate an approach to produce cell monolayers of human dermal fibroblasts with predesigned orientational patterns and topological defects using a photoaligned liquid crystal elastomer (LCE) that swells anisotropically in an aqueous medium. The patterns inscribed into the LCE are replicated by the tissue monolayer and cause a strong spatial variation of cells phenotype, their surface density, and number density fluctuations. Unbinding dynamics of defect pairs intrinsic to active matter is suppressed by anisotropic surface anchoring allowing the estimation of the elastic characteristics of the tissues. The demonstrated patterned LCE approach has potential to control the collective behavior of cells in living tissues, cell differentiation, and tissue morphogenesis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

High temperature mechanical properties of fluorite crystal structured materials (CeO 2 , ThO 2 , and UO 2 ) and advanced accident tolerant fuels (U 3 Si 2 , UN, and UB 2 )

The mechanical interaction between the fuel and cladding that occurs during operation of a nuclear reactor is important to understand as it can lead to cladding failures and release of radioactive material into the coolant. Additionally, in order to develop better models of the pellet-clad mechanical interactions, the mechanical properties of the fuel at relevant operating temperatures, like the elastic moduli, are needed for current and advanced accident tolerant fuels (ATFs). In this work, elevated temperature nanoindentation and resonant ultrasound spectroscopy were used to measure the moduli and hardness of several fluorite materials (CeO 2 , ThO 2 , UO 2 ) and several ATF candidates (ATF) (U 3 Si 2 , UN, UB 2 ). In addition, a comparison of the two techniques was performed in this study to independently validate the mechanical properties.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Crystal plasticity modeling of strain-induced martensitic transformations to predict strain rate and temperature sensitive behavior of 304 L steels: Applications to tension, compression, torsion, and impact

This paper advances crystallographically-based Olson-Cohen (direct γ → α’) and deformation mechanism (indirect γ→ε→α’) phase transformation models for predicting strain-induced austenite to martensite transformation. Here, the advanced transformation models enable predictions of not only strain-path sensitive, but also of strain-rate and temperature sensitive deformation of polycrystalline stainless steels (SSs). The deformation of constituent grains in SSs is modeled as a combination of anisotropic elasticity, crystallographic slip, and phase transformation, while the hardening is based on the evolution of dislocation density and explicit shifts in phase fractions. Such grain-scale deformation is implemented within the meso-scale elasto-plastic self-consistent (EPSC) homogenization model, which is coupled with the implicit finite element (FE) method to provide a constitutive response at each FE integration point for solving boundary value problems at the macro-scale. Parameters pertaining to the hardening and transformation models within FEEPSC are calibrated and validated on a suite of data including flow curves and phase fractions for monotonic compression, tension, and torsion as a function of strain-rate and temperature for wrought and additively manufactured (AM) SS304L. To illustrate the potential and accuracy of the integrated multi-level FE-EPSC simulation framework, geometry, mechanical response, phase fractions, and texture evolution are simulated during gas-gun impact deformation of a cylinder and quasi-static tension of a notched specimen made of AM SS304L. Details of the simulation framework, comparison between experimental and simulation results, and insights from the results are presented and discussed.

304L steels↗
DOE OSTI2022

Geometric compatibility measure m' for twin transmission: A predictor or descriptor?

In this work, the geometric compatibility factor m' is critically analyzed to assess whether it can be used to interpret/predict twin transmission (TT) across grain boundaries (GBs). This geometric measure is widely used to relate the likelihood of TT to the misalignment of both the shear and plane-normal directions within a twin set (i.e., incoming and outgoing twin). Here, using a large set of electron back scattering diffraction (EBSD) data, a detailed statistical analysis of twin-GB interactions is performed for {${1\bar{01}}2$} tensile twins in hexagonal close-packed (HCP) metals Mg, Zr, and Ti at different strain levels. In addition, a full-field crystal plasticity model is employed to quantify the role of local stresses and the applicability of m' as a criterion for the TT process. This combined study addresses the following three main questions: (i) What is the fidelity of m' in describing experimentally observed TTs? (ii) Can m' be used as a metric to predict/anticipate TT? (iii) Does m' naturally capture local stress effects? As a descriptor, m' cannot rationalize ~25% of TT events observed in Mg or more than 50% of TT events in Zr and Ti. As a predictor, the m'-measure does not predict TT events in over ~50% of twin-GB interactions analyzed. Further, the applicability of m' to describe and predict TT events decreases with an increase in elastic anisotropy, plastic anisotropy, and macroscopic strain levels. Finally, the twinning simulations reveal that m' does not capture the key effects of local stresses on variant selection upon twin transmission. The local stress induced by the twinning shear transformation plays a dominant role in driving the TT process compared to the geometric alignment of the constituting twins, i.e., m'.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Large mass single electron resolution detector for dark matter and neutrino elastic interaction searches

Large mass single electron resolution solid state detectors are desirable to search for low mass dark matter candidates and to measure coherent elastic neutrino nucleus scattering (CEvNS). In this paper we present results from a novel 100 g phonon-mediated Si detector with a new interface architecture. This detector gives a baseline resolution of ~ 1e - /h + pair and a leakage current on the order of 10 -16 A. This was achieved by removing the direct electrical contact between the Si crystal and the metallic electrode, and by increasing the phonon absorption efficiency of the sensors. The phonon signal amplification in the detector shows a linear increase while the signal to noise ratio improves with bias voltage, up to 240 V. This feature enables the detector to operate at a low energy threshold which is beneficial for dark matter and CEvNS like searches.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Residual lattice strain in quartzites as a potential palaeo-piezometer

SUMMARY If a crystal lattice is subjected to a stress, it becomes distorted and no longer represents the ideal crystal symmetry, and if the stress introduces defects such as dislocations, some of this distortion is preserved after the applied stress is removed. In this study, we investigate lattice distortion in quartz at the micron scale with synchrotron X-ray Laue diffraction. From Laue images the local deviatoric strain tensor is derived and corresponding stresses are calculated based on elastic properties. The method is applied to metasedimentary quartzites from the Bergell Alps that were deformed at conditions of greenschist facies metamorphism. The residual palaeostrain is represented in maps of the deviatoric strain tensor components and with deviatoric strain axis pole figures. Data suggest overall shortening perpendicular to the schistosity plane but with considerable asymmetry relative to foliation and lineation, probably attributed to simple shear. Crystallographic pole figures from Laue diffraction agree with neutron diffraction and EBSD measurements and display quartz c-axes girdle distributions with maxima also perpendicular to schistosity. The method shows promise to be used as a palaeo-piezometer to unravel the stress field during tectonic deformation.

58 GEOSCIENCES↗
DOE OSTI2020

Photo-printing of faceted DNA patchy particles

Patchy particles with shape complementarity can serve as building blocks for assembling colloidal superstructures. Alternatively, encoding information on patches using DNA can direct assembly into a variety of crystalline or other preprogrammed structures. Here, we present a tool where DNA is used both to engineer shape and to encode information on colloidal particles. Two reactive oil emulsions with different but complementary DNA (cDNA) brushes are assembled into CsCl-like crystalline lattices. The DNA brushes are recruited to and ultimately localized at the junctions between neighboring droplets, which gives rise to DNA-encoded faceted patches. The emulsions are then solidified by ultraviolet (UV) polymerization, producing faceted patchy particles. The facet size and DNA distribution are determined by the balance between the DNA binding energy and the elastic deformation energy of droplets. This method leads to a variety of new patchy particles with directional interactions in scalable quantities.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Asymmetry of the Ferroelectric Phase Transition in BaTiO 3

Symmetry changes during phase transformations fundamentally determine the behavior of thermodynamic systems, governing phenomena as diverse as water evaporation, fermion condensation, and epidemic spreading. Phase transitions are conventionally divided into two classes, and this classification is typically assumed to remain invariant upon reversing the transition. Here, an asymmetric phase transformation is uncovered in the ferroelectric–paraelectric transition of single-crystal BaTiO 3 , a model system for first-order transitions. Under slow temperature variation (≤0.1 °C min −1 ), thermodynamic, dielectric, and domain-structure measurements reveal that the ferroelectric-to-paraelectric transition exhibits latent heat, phase coexistence, and a discontinuous order parameter, while these signatures are absent upon cooling. Complementary phase-field simulations demonstrate similar behavior, attributing it to distinct elastic strain energy accumulation and release during heating and cooling. These findings reveal a first-order character upon heating but a second-order-like behavior upon cooling, challenging the conventional paradigm of symmetric phase-transition classification and suggesting new possibilities for ferroelectric-based energy storage.

Hershkovitz, Asaf [Technion-Israel Institute of Te↗
DOE OSTI2021

Campbell penetration depth in low carrier density superconductor YPtBi

Magnetic penetration depth, λ m , was measured as a function of temperature and magnetic field in single crystals of low carrier density superconductor YPtBi by using a tunnel-diode oscillator technique. Measurements in zero DC magnetic field yield London penetration depth, λ L ( T ) , but in the applied field the signal includes the Campbell penetration depth, λ C ( T ) , which is the characteristic length of the attenuation of small excitation field, H AC , into the Abrikosov vortex lattice due to its elasticity. Whereas the magnetic field dependent λ C exhibit λ C ~ B p with p = 1 / 2 in most of the conventional and unconventional superconductors, we found that p ≈ 0.23 << 1 / 2 in YPtBi due to rapid suppression of the pinning strength. From the measured λ C ( T , H ) , the critical current density is j c ≈ 40 A / cm 2 at 75 mK. We find that this is orders of magnitude lower than that of conventional superconductors of comparable T c .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Lattice-shifted nematic quantum critical point in FeSe 1-x S x

We report the evolution of nematic fluctuations in FeSe 1-x S x single crystals as a function of Sulfur content x across the nematic quantum critical point (QCP) x c ~ 0.17 via Raman scattering. The Raman spectra in the B1g nematic channel consist of two components, but only the low energy one displays clear fingerprints of critical behavior and is attributed to itinerant carriers. Curie–Weiss analysis of the associated nematic susceptibility indicates a substantial effect of nemato-elastic coupling, which shifts the location of the nematic QCP. We argue that this lattice-induced shift likely explains the absence of any enhancement of the superconducting transition temperature at the QCP. The presence of two components in the nematic fluctuations spectrum is attributed to the dual aspect of electronic degrees of freedom in Hund’s metals, with both itinerant carriers and local moments contributing to the nematic susceptibility.

36 MATERIALS SCIENCE↗
NASA NTRS1984

High temperature low-cycle fatigue mechanisms in single crystals of nickel-based superalloy Mar-M 200

Twenty three high temperature low-cycle fatigue tests were conducted on single crystals of the nickel-based superalloy Mar-M 200. Tests were conducted at 760 and 870 C. SEM fractography and transmission electron microscopy were used to determine mechanisms responsible for the observed orientation dependent fatigue behavior. It has been concluded that the plastic characteristics of the alloy lead to orientation-dependent strain hardening and fatigue lives at 760 C. At 870 C, the elastic characteristics of the alloy dominated the behavior, even though the plastic strain ranges were about the same as they were at 760 C. This led to orientation-dependent fatigue lives, but the trends were not the same as they were at 760 C.

Milligan, W. W.↗
DOE OSTI2022

Strongly Chiral Liquid Crystals in Nanoemulsions

We report Liquid crystal (LC) emulsions represent a class of confined soft matter that exhibit exotic internal organizations and size-dependent properties, including responses to chemical and physical stimuli. Past studies have explored micrometer-scale LC emulsion droplets but little is known about LC ordering within submicrometer-sized droplets. This paper reports experiments and simulations that unmask the consequences of confinement in nanoemulsions on strongly chiral LCs that form bulk cholesteric and blue phases (BPs). A method based on light scattering is developed to characterize phase transitions of LCs within the nanodroplets. For droplets with a radius to the pitch ratio (R v /p 0 ) as small as 2/3, the BP-to-cholesteric transition is substantially suppressed, leading to a threefold increase of the BP temperature interval relative to bulk behavior. Complementary simulations align with experimental findings and reveal the dominant role of chiral elastic energy. For R v /p 0 ≈ to 1/3, a single LC phase forms below the clearing point, with simulations revealing the new configuration to contain a τ -1/2 disclination that extends across the nanodroplet. These findings are discussed in the context of mechanisms by which polymer networks stabilize BPs and, more broadly, for the design of nanoconfined soft matter.

42 ENGINEERING↗
DOE OSTI2025

High-temperature anomalous Hall effect driven by frustrated spin fluctuations in the antiferromagnetic delafossite metal PdCrO 2

Metallic delafossite oxides are of exceptional interest due to their ultraclean metallic transport. In the case of PdCrO 2 , this arises in a triangular-lattice antiferromagnet, creating a unique opportunity to study frustrated magnetism in a very clean metal. Here, we combine a chemical vapor transport crystal growth approach with magnetic, thermodynamic, magnetotransport, and neutron scattering measurements to elucidate the striking anomalous Hall effect (AHE) in antiferromagnetic PdCrO 2 . The unconventional AHE (with anomalous Hall conductivity ~10 5 Ω −1 cm −1 ) and a large positive magnetoresistance effect (>1,000%) are shown to exhibit complex temperature dependencies, persisting to almost seven times the Néel temperature (~250 K). These effects are directly compared to elastic neutron scattering, inelastic neutron scattering, and neutron magnetic pair distribution function data, establishing unambiguous links between anomalous magnetotransport properties and directly probed short-range spin fluctuations. The latter occur over a notably broad temperature range due to geometrical magnetic frustration. Connecting to recent experimental and theoretical developments, these findings are discussed in terms of a temperature-dependent interplay between chiral spin order and chiral spin fluctuations, significantly elucidating the high-temperature anomalous magnetotransport in such compounds.

anomalous Hall effect↗
NASA NTRS1989

The role of interfacial dislocation networks in high temperature creep of superalloys

The dislocation networks generated during high-temperature creep of several single-crystal nickel-based superalloys are analyzed. The networks continually evolve during creep at relatively low temperatures or eventually reach a more stable configuration at high temperatures. Specifically, the role of these networks in directional coarsening processes are studied, along with their formation kinetics, characteristics, and stability during creep. The results of this study combined with previous findings suggest that the directional coarsening process is strongly influenced by elastic strain energy. The dislocation networks formed during primary creep are found to be stable during all subsequent creep stages. Aspects of these dislocation networks are determined to be a product of both the applied creep stress and coherency strains.

Gabb, T. P.↗
NASA NTRS1988

Experimental study of thin-walled composite beams

Thin-walled rectangular section composite beams are built out of graphite-epoxy prepreg tape using an autoclave molding technique. Cantilevered beams are tested under static loads using a specially-built apparatus and bending slope and elastic twist at a station are measured using a laser system. Measured bending slope and bending-induced twist distributions are correlated with predicted results obtained using a simple beam analysis as well as a refined finite element analysis. Natural vibration characteristics at different rotational speeds are determined experimentally by testing beams in a specially built 10 ft diameter vacuum chamber. The rotor is excited by piezo-electric crystals and response is determined from strain gages mounted on the surface. For composite beams with bending-twisting couplings (symmetric layup), effects of section warping and transverse shear on structural response are found to be substantial. These results were substantiated by the analyses.

Chandra, Ramesh↗
DOE OSTI2021

Thermal conductivity tensor of β -1,3,5,7-tetranitro-1,3,5,7-tetrazoctane ( β -HMX) as a function of pressure and temperature

Here, we have used reverse non-equilibrium molecular dynamics (RNEMD) simulations to determine the full thermal conductivity tensor for the monoclinic high explosive crystal β-1,3,5,7-tetranitro-1,3,5,7-tetrazoctane (β-HMX). In order to do so for the monoclinic crystal, four directions for heat propagation are used. Effects of the temperature and pressure are investigated between 200 and 500 K and 0 and 5 GPa, respectively, which approximately covers the range where the β polymorph is stable. Simulations are carried out with the Smith–Bharadwaj non-reactive empirical potential [Smith and Bharadwaj, J. Phys. Chem. B 103, 3570 (1999)], which is known to reproduce well the thermo-elastic properties of HMX. Our results indicate that the thermal conductivity, κ, is highly anisotropic, with 36% difference between the two extreme values at 300 K and 0 GPa. A simple function is used to interpolate κ in the pressure-temperature regime considered in this study, which can be used in continuum models. The results from RNEMD simulations compare well with available experimental results from the literature and allow the determination of κ for any direction and temperature and pressure within or around the fitting interval.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS2013

Castable Amorphous Metal Mirrors and Mirror Assemblies

A revolutionary way to produce a mirror and mirror assembly is to cast the entire part at once from a metal alloy that combines all of the desired features into the final part: optical smoothness, curvature, flexures, tabs, isogrids, low CTE, and toughness. In this work, it has been demonstrated that castable mirrors are possible using bulk metallic glasses (BMGs, also called amorphous metals) and BMG matrix composites (BMGMCs). These novel alloys have all of the desired mechanical and thermal properties to fabricate an entire mirror assembly without machining, bonding, brazing, welding, or epoxy. BMGs are multi-component metal alloys that have been cooled in such a manner as to avoid crystallization leading to an amorphous (non-crystalline) microstructure. This lack of crystal structure and the fact that these alloys are glasses, leads to a wide assortment of mechanical and thermal properties that are unlike those observed in crystalline metals. Among these are high yield strength, carbide-like hardness, low melting temperatures (making them castable like aluminum), a thermoplastic processing region (for improving smoothness), low stiffness, high strength-to-weight ratios, relatively low CTE, density similar to titanium alloys, high elasticity and ultra-smooth cast parts (as low as 0.2-nm surface roughness has been demonstrated in cast BMGs). BMGMCs are composite alloys that consist of a BMG matrix with crystalline dendrites embedded throughout. BMGMCs are used to overcome the typically brittle failure observed in monolithic BMGs by adding a soft phase that arrests the formation of cracks in the BMG matrix. In some cases, BMGMCs offer superior castability, toughness, and fatigue resistance, if not as good a surface finish as BMGs. This work has demonstrated that BMGs and BMGMCs can be cast into prototype mirrors and mirror assemblies without difficulty.

Hofmann, Douglas C.↗