Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “elastic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

The Thermo-Elastic Properties and Damping of U-6wt%Nb

While thermal expansion data exists for quenched (as well as aged) U-6wt%Nb, there is wide variation in the reported room temperature elastic moduli. To better understand the room temperature elastic behavior and to address the complete absence of data on the temperature dependence of the elastic moduli, room temperature and in-situ elevated temperature resonant ultrasonic spectroscopy (RUS) was performed along with x-ray diffraction (XRD) and dilatometry using a thermomechanical analyzer (TMA). An in-situ small- and wide-angle x-ray scattering (SAXS/WAXS) experiment was performed on a companion sample to help interpret the results. The room temperature polycrystalline dynamic moduli were measured to be E = 95.4 ± 4.5 GPa and G = 35.2 ± 0.2 GPa, respectively. As the temperature is raised, the stiffness slowly decreases, consistent with the empirical rule proposed by Varshni, up to the point of precipitation of the equilibrium α-U phase, which is stiffer than the martensitic phases. Homogenization theory of composites can be used to rationalize the observed response at high temperatures and after high-temperature exposures. Further, aging of the material at low temperatures (≤200°C) does not affect the linear elastic stiffness, but does impact the damping behavior which can be measured through RUS. This change in damping provides another perspective on the microstructure changes induced by low-temperature aging which also result in significant strengthening.

36 MATERIALS SCIENCE↗

Influence of temperature on the lattice misfit and elastic moduli of a Ni based single crystal superalloy with high volume fraction of γ′ phase

Highlights: • The variation of the lattice misfit with temperature in a Ni based single-crystal superalloy with high volume fraction of γ' phase was determined by high-temperature X-ray diffraction (HT-XRD) technique at temperatures between 25 °C and 1200 °C. • When the temperature was higher than 1100 °C, the γ' phase obviously dissolved, leading to a lower content of Mo and Re in the γ phase, and then resulted in a smaller absolute value of the lattice misfit. • The contribution of dissolution of γ′ phase to the reduction of the misfit increased with rising temperature and reached 29.5% at 1200 °C. • When the temperature exceeded 1100 °C, the difference of elastic moduli of γ and γ′ phases increased with rising temperature was attributed to the elastic modulus of γ phase decreased significantly. - Abstract: The variation of the lattice parameter with temperature in a Ni based single-crystal superalloy with high volume fraction of γ′ phase IC32 was determined by high-temperature X-ray diffraction (HT-XRD) technique at temperatures between 25 °C and 1200 °C. The effects of the temperature, especially the ultra-high temperature (beyond 1100 °C), on lattice misfit, elastic moduli, γ′ volume fraction and composition of γ, γ′ phases were investigated in this study. The results show that the absolute value of lattice misfit first increased and then decreased with increasing temperature and reached the maximum of 0.53% at 1100 °C. When the temperature was higher than 1100 °C, the γ′ precipitate obviously dissolved, leading to a lower content of Mo and Re in the γ phase, and then resulted in a smaller absolute value of lattice misfit. The contribution of dissolution of γ′ phase to the reduction of the misfit increased with rising temperature and reached 29.5% at 1200 °C. Moreover, when the temperature was above 1100 °C, the elastic moduli of the γ phase and alloy decreased significantly, while this phenomenon was not observed in the γ′ phase.

36 MATERIALS SCIENCE↗

Pressure and doping dependent elastic and thermodynamical properties of Ga{sub 1-x}In{sub x}P mixed valent compounds

Using a phenomenological lattice model incorporating the long-range Coulomb and charge transfer caused by the deformation of the electron shells of the overlapping ions and the Hafemeister and Flygare type short-range overlap repulsion extended upto the second neighbor ions and the van der Waals (vdW) interaction, we present a comprehensive study to understand the effects of pressure on the elastic behavior as ductility (brittleness) and thermodynamical properties of Ga{sub 1-x}In{sub x}P. Estimated phase-transition pressure and the vast volume discontinuity in pressure-volume phase diagram confirm the structural phase transition from zinc blende (B3) to rock salt (B1) phase. From the elastic constants the Poisson's ratio {nu}, the ratio R{sub S/B} of S (Voigt averaged shear modulus) over B (bulk modulus), elastic wave velocity, average wave velocity and thermodynamical property Debye temperature is calculated. The Poisson's ratio {nu} and the ratio R{sub S/B} allows one to conclude that Ga{sub 1-x}In{sub x}P is brittle in zinc blende (B3) and ductile nature is inferred in sodium chloride (B1) phase. To our knowledge this is the first quantitative theoretical prediction of the doping and pressure dependent elastic properties for mixed valent Ga{sub 1-x}In{sub x}P compounds and still awaits experimental confirmations.

36 MATERIALS SCIENCE↗

New self-consistent homogenization for thermo-elastic polycrystals with imperfect interfaces

Here we present a new thermo-elastic self-consistent formulation to calculate the thermo-mechanical response of polycrystalline aggregates with imperfect interfaces. The new model is based on an improved treatment of the effect of imperfect interfaces on the micromechanical response of the grains compared to pre-existing models. New expressions/algorithms are derived for the effective elastic and thermal properties, localization relations, and calculation of intragranular field fluctuations. In addition, derivation of a novel integral equation for the strain field in a heterogeneous elastic medium subjected to arbitrary thermal strain field and displacement jumps is presented. The new model is applied to study the effective thermo-elastic properties and average field fluctuations as a function of the interface properties for imperfectly-bonded triaminotrinitrobenzene (TATB) polycrystalline granular aggregates. The proposed formulation is general in the sense that it can be extended to other material systems and deformation regimes that require a proper consideration of the effect of imperfect interface properties on the material's thermo-mechanical response.

36 MATERIALS SCIENCE↗

Measuring the elastic tensor of a monolithic SiC hollow cylinder with resonant ultrasound spectroscopy

Resonant Ultrasound Spectroscopy (RUS) has become a standard tool in material science to measure nondestructively the elastic properties of materials. The widespread adoption of this tool for applications related to nondestructive testing and structural health monitoring in the industry and other places has been restricted thus far by some requirements imposed by RUS on the sample to be tested, in particular the fact that the sample geometry should be relatively simple (e.g., cuboid, cylinder, or sphere). Here, we use RUS to determine the baseline material properties of a hollow cylinder made of monolithic SiC, a surrogate material and geometry representing nuclear fuel cladding for this study. Typically, elastic properties of the nuclear fuel cladding samples are inspected destructively (e.g., indentation) or with acoustic techniquesrequiring multiple and cumbersome measurements. Here, a relatively new RUS approach specifically developed to measure the elastic tensor of samples with arbitrary geometries is used. The results obtained from this RUS approach are compared to values reported in the literature. As a second verification step, vibrational mode shapes computed numerically with the elastic constants are compared to those measured on the sample using a 3D laser Doppler vibrometer, showing an excellent agreement.

36 MATERIALS SCIENCE↗

Thermodynamics–Structure–Dynamics Correlations and Nonuniversal Effects in the Elastically Collective Activated Hopping Theory of Glass-Forming Liquids

We employ the microscopic Elastically Collective Nonlinear Langevin Equation (ECNLE) theory of activated dynamics in combination with crystal-avoiding simulations to study four inter-related questions for metastable monodisperse hard sphere fluids. The first is how significantly improved integral equation theory structural input (Modified-Verlet (MV) closure) changes the dynamical predictions of ECNLE theory. The main consequence is a modest enhancement of the importance of the collective elastic barrier relative to its local cage contribution, which increases the alpha relaxation time and fragility relative to prior results based on the Percus–Yevick closure. Second, ECNLE-MV theory predictions for the alpha time and self-diffusion constant in the metastable regime are quantitatively compared to our new simulations. The small adjustment of a numerical prefactor that enters the collective elastic barrier leads to quantitative agreement over three decades. Third, using the more accurate MV structural input, ECNLE theory is shown to predict thermodynamics–structure–dynamics “correlations” based on various long and short wavelength scalar properties all related to static two-point collective density fluctuations. The logarithm of the alpha relaxation time scales as a power law with these scalar metrics with an exponent that is significantly lower in the less dense noncooperative activated regime compared to the very dense highly cooperative regime. However, the discovered correlation of activated relaxation with a thermodynamic property (dimensionless compressibility) is not causal in ECNLE theory, but rather reflects a strong connection between the local structural quantities that quantify kinetic constraints in the theory with the amplitude of long wavelength density fluctuations. Fourth, the consequences of chemically specific nonuniversalities associated with the onset condition and relative importance of collective elasticity are studied. In conclusion, the predicted thermodynamics–structure–dynamics correlations are found to be robust, albeit with nontrivial shifts of the onset condition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

X-ray diffraction study of the single-crystal elastic moduli of [epsilon]-Fe up to 30 GPa

Room temperature investigations of the single-crystal elastic moduli and anisotropy of the {epsilon} phase of iron are performed up to 30.3 GPa using the radial X-ray diffraction technique. The accuracy of the calculated elastic moduli has improved compared to previous measurements using similar techniques because of an increase in accuracy of the measurement, confinement of the sample to limit the effect of plasticity, and better calibration of the stress conditions. The aggregate shear modulus that we obtain is in good agreement with a variety of other experimental deductions but differs from first-principles calculations. The effects of the calibration of stress and micromechanical model on the deduction of elastic moduli and elastic anisotropy are discussed in detail. The anisotropy we obtain has the same order of magnitude as first-principles calculations but the direction is reversed, with a weaker amplitude that previous measurements.

58 GEOSCIENCES↗

Effect of Grain Shape and Relative Humidity on the Nonlinear Elastic Properties of Granular Media

Abstract This study focuses on unraveling the microphysical origins of the nonlinear elastic effects, which are pervasive in the Earth's crust. Here, we examine the influence of grain shape on the elastic nonlinearity of granular assemblies. We find that the elastic nonlinearity of angular sand particles is of the same order of magnitude as that previously measured in spherical glass beads. However, while the elastic nonlinearity of glass beads increases by an order of magnitude with RH that of sand particles is rather RH independent. We attribute this difference to the angularity of sand particles: absorbed water on the spherical grains weakens the junctions making them more nonlinear, while no such effect occurs in sand due to grain interlocking. Additionally, for one of the nonlinear parameters that likely arises from shearing/partial slip of the grain junctions, we observe a sharp amplitude threshold in sand which is not observed in glass beads.

58 GEOSCIENCES↗

Single crystal elasticity of natural topaz at high-temperatures

Topaz is an aluminosilicate mineral phase stable in the hydrothermally altered pegmatitic rocks and also in subducted sedimentary lithologies. In nature, topaz often exhibits solid solution between fluorine and hydrous end members. We investigated elasticity of naturally occurring single crystal topaz (Al 2 SiO 4 F 1.42 (OH) 0.58 ) using Resonant Ultrasound Spectroscopy. We also explored the temperature dependence of the full elastic constant tensor. We find that among the various minerals stable in the Al 2 O 3 -SiO 2 -H 2 O ternary system, topaz exhibits moderate elastic anisotropy. As a function of temperature, the sound velocity of topaz decreases with \(\frac{{\boldsymbol{d}}{{\boldsymbol{V}}}_{{\boldsymbol{P}}}}{{\boldsymbol{d}}{\boldsymbol{T}}}\) and \(\frac{{\boldsymbol{d}}{{\boldsymbol{V}}}_{{\boldsymbol{S}}}}{{\boldsymbol{d}}{\boldsymbol{T}}}\) being –3.10 and –2.30 × 10 –4 km/s/K. The elasticity and sound velocity of topaz also vary as a function of OH and F content. The effect of composition ( \({{\boldsymbol{x}}}_{{\boldsymbol{O}}{\boldsymbol{H}}}\) ) on the velocity is equally important as that of the effect of temperature. We also note that the Debye temperature ( \({{\boldsymbol{\Theta }}}_{{\boldsymbol{D}}}\) ) of topaz at room temperature condition is 910 K and decreases at higher temperature. The Debye temperature shows positive correlation with density of the mineral phases in the Al 2 O 3 -SiO 2 -H 2 O ternary system.

36 MATERIALS SCIENCE↗

Local elasticity in nonlinear rheology of interacting colloidal glasses revealed by neutron scattering and rheometry

The flow of colloidal suspensions is ubiquitous in nature and industry. Colloidal suspensions showcase a wide range of rheological behavior, which should be closely related to the microscopic structure of the systems. With in situ small-angle neutron scattering complemented by rheological measurements, we investigated the deformation behavior of a charge-stabilized colloidal glass at particle level undergoing steady shear. A short-lived, localized elastic response at particle level, termed as the transient elasticity zone (TEZ), was identified from the neutron spectra. The existence of the TEZ, which could be promoted by the electrostatic interparticle potential, is a signature of deformation heterogeneity: the body of fluids under shear behaves like an elastic solid within the spatial range of the TEZ but like fluid outside the TEZ. The size of the TEZ shrinks as the shear rate increases in the shear thinning region, which shows that the shear thinning is accompanied by a diminishing deformation heterogeneity. More interestingly, the TEZ is found to be the structural unit that provides the resistance to the imposed shear, as evidenced by the quantitative agreement between the local elastic stress sustained by the TEZ and the macroscopic stress from rheological measurements at low and moderate shear rates. Our findings indicate an understanding on the nonlinear rheology of interacting colloidal glasses from a micro-mechanical view.

36 MATERIALS SCIENCE↗

Activated penetrant dynamics in glass forming liquids: size effects, decoupling, slaving, collective elasticity and correlation with matrix compressibility

In this work, we employ the microscopic self-consistent cooperative hopping theory of penetrant activated dynamics in glass forming viscous liquids and colloidal suspensions to address new questions over a wide range of high matrix packing fractions and penetrant-to-matrix particle size ratios. The focus is on the mean activated relaxation time of smaller tracers in a hard sphere fluid of larger particle matrices. This quantity also determines the penetrant diffusion constant and connects directly with the structural relaxation time probed in an incoherent dynamic structure factor measurement. The timescale of the non-activated fast dissipative process is also studied and is predicted to follow power laws with the contact value of the penetrant–matrix pair correlation function and the penetrant–matrix size ratio. For long time penetrant relaxation, in the relatively lower packing fraction metastable regime the local cage barriers are dominant and matrix collective elasticity effects unimportant. As packing fraction and/or penetrant size grows, much higher barriers emerge and the collective elasticity associated with the correlated matrix dynamic displacement that facilitates penetrant hopping becomes important. This results in a non-monotonic variation with packing fraction of the degree of decoupling between the matrix and penetrant alpha relaxation times. The conditions required for penetrant hopping to become slaved to the matrix alpha process are determined, which depend mainly on the penetrant to matrix particle size ratio. By analyzing the absolute and relative importance of the cage and elastic barriers we establish a mechanistic understanding of the origin of the predicted exponential growth of the penetrant hopping time with size ratio predicted at very high packing fractions. A dynamics-thermodynamics power law connection between the penetrant activation barrier and the matrix dimensionless compressibility is established as a prediction of theory, with different scaling exponents depending on whether matrix collective elasticity effects are important. Quantitative comparisons with simulations of the penetrant relaxation time, diffusion constant, and transient localization length of tracers in dense colloidal suspensions and cold viscous liquids reveal good agreements. Multiple new predictions are made that are testable via future experiments and simulations. Extension of the theoretical approach to more complex systems of high experimental interest (nonspherical molecules, semiflexible polymers, crosslinked networks) interacting via variable hard or soft repulsions and/or short range attractions is possible, including under external deformation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparison of MCNPX and GEANT4 to Predict the Contribution of Non-elastic Nuclear Interactions to Absorbed Dose in Water, PMMA and A150

Proton induced non-elastic nuclear reactions play an important role in the dose distribution of clinically used proton beams as they deposit dose of high biological effectiveness both within the primary beam path as well as outside the beam to untargeted tissues. Non-elastic nuclear reactions can be evaluated using transport codes based on the Monte Carlo method. In this work, we have utilized the Los Alamos code MCNPX and the CERN GEANT4 toolkit, which are currently the most widely used Monte Carlo programs for proton radiation transport simulations in medical physics, to study the contribution of non-elastic nuclear interactions to the absorbed dose of proton beams in the therapeutic energy range. The impact of different available theoretical models to address the nuclear reaction process was investigated. The contribution of secondary particles from non-elastic nuclear reactions was calculated in three materials relevant in radiotherapy applications: water, PMMA and A150. The results evidence that there are differences in the calculated contribution of the secondary particles heavier than protons to the absorbed dose, with different approaches to model the nuclear reactions. The MCNPX calculation give rise to a larger contribution of d, t, {alpha}{sup 3}He to the total dose compared to the GEANT4 physical models chosen in this work.

61 RADIATION PROTECTION AND DOSIMETRY↗

Observation of two elastic thresholds in Ge{sub x}As{sub y}Se{sub 1-x-y} glasses

We have prepared Ge{sub x}As{sub y}Se{sub 1-x-y} glasses with mean coordination numbers (MCNs) from 2.2 to 2.86. T{sub g} was found to generally increase with increasing MCN while the glass density showed a maximum at MCN{approx_equal}2.45 and a minimum at MCN{approx_equal}2.65. The elastic moduli of the glasses were estimated from the shear and compressional wave velocities measured by ultrasonic pulse interferometry. For the first time we simultaneously observed two elastic transition thresholds, the first at MCN{approx_equal}2.45 and the second at MCN{approx_equal}2.65, which appear closely correlated with changes in the glass microstructure. The elastic moduli of two groups of samples with the same MCN=2.4 and 2.64 but different compositions suggest that the chemical compositions also have an influence on the elastic properties.

36 MATERIALS SCIENCE↗

Spectroscopic Investigation of {sup 7}Li and {sup 7}Be nuclei by elastic-transfer reactions

The cluster structure of {sup 7}Li and {sup 7}Be has been investigated by the elastic-transfer {sup 4}He({sup 7}Li,{sup 4}He){sup 7}Li and {sup 3}He({sup 7}Be,{sup 3}He){sup 7}Be reactions, respectively. Angular distribution for the elastic-transfer of {sup 7}Li+{sup 4}He has been measured in Sao Paulo at E{sub CM} = 9.67 MeV. Together with available elastic-transfer angular distributions measured at other energies ranging from E{sub CM} = 2.29 to 32.13 MeV, a global optical model analysis has been performed. The measurement of the elastic-transfer angular distribution at E{sub LAB} = 48.2 MeV for the {sup 7}Be+{sup 3}He system is also described.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Correlation between relaxations and plastic deformation, and elastic model of flow in metallic glasses and glass-forming liquids

We study the similarity and correlations between relaxations and plastic deformation in metallic glasses (MGs) and MG-forming liquids. It is shown that the microscope plastic events, the initiation and formation of shear bands, and the mechanical yield in MGs where the atomic sites are topologically unstable induced by applied stress, can be treated as the glass to supercooled liquid state transition induced by external shear stress. On the other hand, the glass transition, the primary and secondary relaxations, plastic deformation and yield can be attributed to the free volume increase induced flow, and the flow can be modeled as the activated hopping between the inherent states in the potential energy landscape. We then propose an extended elastic model to describe the flow based on the energy landscape theory. That is, the flow activation energy density is linear proportional to the instantaneous elastic moduli, and the activation energy density {rho}{sub E} is determined to be a simple expression of {rho}{sub E}=(10/11)G+(1/11)K. The model indicates that both shear and bulk moduli are critical parameters accounting for both the homogeneous and inhomogeneous flows in MGs and MG-forming liquids. The elastic model is experimentally certified. We show that the elastic perspectives offers a simple scenario for the flow in MGs and MG-forming liquids and are suggestive for understanding the glass transition, plastic deformation, and nature and characteristics of MGs.

36 MATERIALS SCIENCE↗

Sensitivity of fusion and quasi-elastic barrier distributions of {sub 16}O+{sub 144}Sm reaction on the coupling radius parameter

We study the heavy-ion collision at sub-barrier energies of {sub 16}O+{sub 144}Sm system using full order coupled-channels formalism. We especially investigate the sensitivity of fusion and quasi-elastic barrier distributions for this system on the coupling radius parameter. We found that the coupled-channels calculations of the fusion and the quasi-elastic barrier distributions are sensitive to the coupling radius for this reaction in contrast to the fusion and quasi-elastic cross section. Our study indicates that the larger coupling radius, i.e., r{sub coup}=1.20, is required by the experimental quasi-elastic barrier distribution. However, the experimental fusion barrier distribution compulsory the small value, i.e., r{sub coup}=1.06.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Elastically Cooperative Activated Barrier Hopping Theory of Relaxation in Viscous Fluids. II. Thermal Liquids

Building on the elastically collective nonlinear Langevin equation theory developed for hard spheresin Paper I, we propose and implement a quasi-universal theory for the alpha relaxation of thermalliquids based on mapping them to an effective hard sphere fluid via the dimensionless compressibility.The result is a zero adjustable parameter theory that can quantitatively address in a unifiedmanner the alpha relaxation time over 14 or more decades. The theory has no singularities abovezero Kelvin, and relaxation in the equilibrium low temperature limit is predicted to be of a roughlyArrhenius form. The two-barrier (local cage and long range collective elastic) description results ina rich dynamic behavior including apparent Arrhenius, narrow crossover, and deeply supercooledregimes, and multiple characteristic or crossover times and temperatures of clear physical meaning.Application of the theory to nonpolar molecules, alcohols, rare gases, and liquids metals is carriedout. Overall, the agreement with experiment is quite good for the temperature dependence of thealpha time, plateau shear modulus, and Boson-like peak frequency for van der Waals liquids, thoughless so for hydrogen-bonding molecules. The theory predicts multiple growing length scales uponcooling, which reflect distinct aspects of the coupled local hopping and cooperative elastic physics.Calculations of the growth with cooling of an activation volume, which is strongly correlated with ameasure of dynamic cooperativity, agree quantitatively with experiment. Comparisons with elastic,entropy crisis, dynamic facilitation, and other approaches are performed, and a fundamental basisfor empirically extracted crossover temperatures is established. The present work sets the stage foraddressing distinctive glassy phenomena in polymer melts, and diverse liquids under strong confinement.

Mirigian, Stephen↗

Elastic anisotropy and shear-induced atomistic deformation of tetragonal silicon carbon nitride

First-principles calculations are employed to provide a fundamental understanding of the structural features, elastic anisotropy, shear-induced atomistic deformation behaviors, and its electronic origin of the recently proposed superhard t-SiCN. According to the dependences of the elastic modulus on different crystal directions, the t-SiCN exhibits a well-pronounced elastic anisotropy which may impose certain limitations and restrictions on its applications. The further mechanical calculations demonstrated that t-SiCN shows lower elastic moduli and ideal shear strength than those of typical hard substances of TiN and TiC, suggesting that it cannot be intrinsically superhard as claimed in the recent works. We find that the failure modes of t-SiCN at the atomic level during shear deformation can be attributed to the breaking of C-C bonds through the bonding evolution and electronic localization analyses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗