Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dynamic models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Extension to the dynamic modeling of the large angle magnetic suspension test fixture

The Large Angle Magnetic Suspension Test Fixture (LAMSTF) is a laboratory scale proof-of-concept system. The configuration is unique in that the electromagnets are mounted in a circular planar array. A mathematical model of the system had previously been developed, but was shown to have inaccuracies. These inaccuracies showed up in the step responses. Eddy currents were found to be the major cause of the modeling errors. In the original system, eddy currents existed in the aluminum baseplate, iron cores, and the sensor support frame. An attempt to include the eddy current dynamics in the system model is presented. The dynamics of a dummy sensor ring were added to the system. Adding the eddy current dynamics to the simulation improves the way it compares to the actual experiment. Also presented is a new method of determining the yaw angle of the suspended element. From the coil currents the yaw angle can be determined and the controller can be updated to suspend at the new current. This method has been used to demonstrate a 360 degree yaw angle rotation.

Foster, Lucas E.↗
DOE OSTI2018

Algal Cultivation Growth Dynamic Modeling and Analysis

The purpose of this PTS was for Sandia National Laboratories (Sandia) to conduct collaborative research with Arizona Board of Regents for and on behalf of Arizona State University (ASU) to further develop algae growth and computational fluid dynamics (CFO) models that can predict and optimize pond design and cultivation methods to improve algal yield in outdoor algal ponds.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

Algal Cultivation Growth Dynamic Modeling and Analysis

The purpose of this PTS was for Sandia National Laboratories (Sandia) to conduct collaborative research with Arizona Board of Regents for and on behalf of Arizona State University (ASU) to further develop algae growth and computational fluid dynamics (CFO) models that can predict and optimize pond design and cultivation methods to improve algal yield in outdoor algal ponds.

Gharagozloo, Patricia↗
DOE OSTI2018

Modeling dynamic fracture in granite under in situ conditions at high temperatures and pressures

Reproducing the in situ mechanical response of granite at a depth of a few kilometer under dynamic loading presents significant challenges. We have developed and calibrated a new thermo-mechanical model for granite using extensive experimental data from both quasi-static and dynamic test data. The model includes parameters which can be calibrated for a specific geologic setting. Using the model developed we have performed a series of 2D and 3D simulations to evaluate effects of in situ stress and temperature on the extent of damage surrounding underground explosions. We compare our results with available data for cavity size, plastic zone and peak velocity attenuation with range in granite.

58 GEOSCIENCES↗
DOE OSTI2018

Generalized 3D beam dynamics model for industrial traveling wave linacs design and simulations

Beam dynamics simulations in traveling wave (TW) accelerating structures with significant beam loading is a challenging problem. Some codes are capable of calculating the TW electromagnetic fields, and some can track particles through such fields, but most cannot treat both self-consistently. A few commercial codes can model the physics correctly at the expense of many processor-hour computations to obtain converged self-consistent solutions. However, simple, accurate equations of motion for intensive beam dynamics in TW accelerating structure analysis have been previously obtained by Masunov and subsequently implemented in the Hellweg code, which was developed at the Moscow Engineering-Physics Institute. Hellweg is based on equations that allow fast simulations of beam dynamics while taking into account such effects as beam loading, space charge, and external magnetic fields. In this paper, we describe in detail some recent improvements to the Hellweg physics kernel. We have generalized the Masunov results into a 3D set of equations of motion, which include all spatial components of the radiofrequency (RF) and external magnetic fields. We have also improved the Lapostolle space charge model to the general 3D ellipsoid form for any dimensions’ ratio, consideration for the particles outside the beam core, and the fields from the neighboring bunches that can exist in the real machine. These modifications allow approaching the Hellweg accuracy to the self-consistent commercial codes while keeping the simulation time short, which is essential during the linac design and optimization stage. The implementation of these new capabilities in Hellweg is carefully benchmarked against other codes and analytical calculations. The code is freely available with an open source license.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS2023

Development of a Computational Fluid Dynamics Model for a High-Speed Centrifugal Compressor

Computational fluid dynamics (CFD) has become widely used in the design and analysis of turbomachinery components such as centrifugal compressors. However, CFD is only a limited representation of experimental cases and struggles to model complex flows or can lack small model details to increase computation speed. To make advancements in compressor technology, designers need tools like CFD that can help them predict flow behavior in new designs. The High Efficiency Centrifugal Compressor (HECC) was designed by United Technologies Research Center (UTRC) for NASA to investigate the difficulties behind improving centrifugal compressor technology and to provide an open case to the turbomachinery research community. CFD analysis was completed by UTRC to aid in the design process. The pre-test study significantly overpredicted the compressor’s performance, and while post-test analysis was more representative, its results have yet to be publicly available. CFD technology has also since improved in recent years. In this study, a high-fidelity computational model for the vaneless configuration of HECC operating at its design point was developed and compared to an equivalent experimental case. This model incorporated GPU versions of mesh generation and solver codes from AeroDynamic Solutions, Inc. The development of such a model is significant since there has yet to be a published numerical simulation of HECC’s vaneless configuration. Additionally, the use of GPU codes decreases computation times for the model, which has allowed for the inclusion of impeller blade fillets. Initial results showed a general overprediction of compressor performance by the model. Predictions were more accurate for the impeller compared to predictions for the full compressor stage. Spanwise analyses showed that the model tended to follow flow behavior patterns exhibited in the experiment. Beyond this study, this model will be iterated upon and experimentally validated to further examine HECC performance.

centrifugal compressor↗
DOE OSTI2022

Static and dynamic modeling of steam integration for a NuScale small modular reactor and pulp and paper mill coupling for carbon-neutral manufacturing

Small modular reactors (SMRs) are reactor designs producing less than 300 MWe and are generally planned for deployment as multimodule nuclear power plants. The possibility of factory-manufactured, flexibly sized plants expands the opportunities for nuclear power to different communities and industries, including manufacturing plants that currently utilize fossil fuels to produce both steam and electricity. This paper examines the feasibility of coupling a NuScale SMR with a midsize pulp and paper mill in the Southeastern United States. A steady-state mill model was developed in Aspen HYSYS, based on real data from the operation of the mill, and modified it to include the SMR while maintaining steam quality requirements and making as few changes as possible to existing equipment. Dynamic plant models were also developed Dymola to demonstrate possible plant conditions, using three configurations. Preliminary results suggest that, while SMR coupling is physically feasible, its economic feasibility is limited by the differences in steam and electricity demands. Because of limitations in the amount of steam the mill can take from the SMR, sizing the SMR for the plant’s steam demand may result in an electricity deficit, or vice versa. Furthermore, dynamic analyses show that the addition of a thermal storage system could reduce such deficits, but this entails its own challenges. Each plant must determine the best configuration and control scheme for itself, based on its electricity and heat needs, including the peak duration and intensity for both. Ultimately, an implementation of SMRs with manufacturing processes would benefit from partnering with a local utility to purchase excess electricity generated by the SMR. This will help manufacturing facilities meet their environmental and cost-savings goals, in addition to meeting the need for cost-effective baseload power across the United States.

03 NATURAL GAS↗
NASA NTRS1996

Dynamic Modeling of Starting Aerodynamics and Stage Matching in an Axi-Centrifugal Compressor

A DYNamic Turbine Engine Compressor Code (DYNTECC) has been modified to model speed transients from 0-100% of compressor design speed. The impetus for this enhancement was to investigate stage matching and stalling behavior during a start sequence as compared to rotating stall events above ground idle. The model can simulate speed and throttle excursions simultaneously as well as time varying bleed flow schedules. Results of a start simulation are presented and compared to experimental data obtained from an axi-centrifugal turboshaft engine and companion compressor rig. Stage by stage comparisons reveal the front stages to be operating in or near rotating stall through most of the start sequence. The model matches the starting operating line quite well in the forward stages with deviations appearing in the rearward stages near the start bleed. Overall, the performance of the model is very promising and adds significantly to the dynamic simulation capabilities of DYNTECC.

Wilkes, Kevin↗
NASA NTRS1979

Dynamic modeling of brushless dc motor-power conditioner unit for electromechanical actuator application

A comprehensive digital model for the analysis of the dynamic-instantaneous performance of a power conditioner fed samarium-cobalt permanent magnet brushless DC motor is presented. The particular power conditioner-machine system at hand, for which this model was developed, is a component of an actual prototype electromechanical actuator built for NASA-JSC as a possible alternative to hydraulic actuators as part of feasibility studies for the shuttle orbiter applications. Excellent correlation between digital simulated and experimentally obtained performance data was achieved for this specific prototype. This is reported on in this paper. Details of one component of the model, its applications and the corresponding results are given in this paper.

Demerdash, N. A.↗
NASA NTRSDate not supplied

GT2024-139262: Development of a Computational Fluid Dynamics Model for a High-Speed Centrifugal Compressor

Computational fluid dynamics (CFD) has become widely used in the design and analysis of turbomachinery components such as centrifugal compressors. However, CFD is only a limited representation of experimental cases and struggles to model complex flows or lack model details to increase computation speed. The High Efficiency Centrifugal Compressor (HECC) was designed by United Technologies Research Center for NASA to investigate the difficulties behind improving centrifugal compressor technology and to provide an open case to the turbomachinery research community. The CFD technology seen in previous numerical models of the compressor have improved since then. In this study, a high-fidelity computational model for the vaneless configuration of HECC operating at its design point was developed and compared to an equivalent experimental case. This model incorporated GPU versions of mesh generation code WAND and solver code LEO from AeroDynamic Solutions, Inc. Blade sections extracted from the solid model formed the basis of the impeller mesh, while the remainder of the stage was modeled as ducts. Standard day aerodynamic conditions, design rotational speed, design mass flow rate, and inlet flow angles served as additional inputs. A mesh sensitivity study was performed prior to using the model for analysis. The accuracy of the model’s predictions of impeller and stage performance were assessed by comparing the total pressure ratio, total temperature rise ratio, and adiabatic efficiency to the corresponding parameters observed in the experimental case. Results showed a general overprediction of compressor performance by the model. Predictions were more accurate for the impeller performance compared to those for the full compressor stage. Spanwise analyses showed that the model tended to follow flow behavior patterns exhibited in the experiment. Beyond this study, this model was used to examine HECC aerodynamics and performance in research following thereafter.

centrifugal compressor↗
NASA NTRSDate not supplied

Validation of Computational Fluid Dynamics Model for Pressurized Expulsion of Liquid Methane using Non-Condensable Pressurant

An important aspect of cryogenic fluid management is the design of the pressurization systems used to maintain and regulate the tank pressure as propellant is expelled from the tanks. To design these systems efficiently and effectively it is important to be able to predict the amount pressurant gas needed and how the pressurant gas affects the propellant as it is added in the tank. Computational fluid dynamics (CFD) modeling is a common tool that is used to help with these predictions, so it is crucial to have CFD models that are validated by comparing numerical results to experimental data. In the 1970’s extensive testing was done at NASA Plum Brook K-Site Facility exploring the pressurant gas requirements needed to maintain tank pressure while liquid methane is discharged from a spherical tank. These tests explored using different pressurant gases (methane, helium, hydrogen, and nitrogen) under static and sloshing conditions. The data gathered from the experiments includes the gas and wall temperatures at the end of the expulsion, the gas concentrations, and the total amount of pressurant added. This study presents a CFD model that accurately predicts similar results to the experimental data specifically for the tests in which helium, a non-condensable gas, was used. This comparison anchors the commercial CFD code Flow3D model and gives confidence for future use in design and analysis of pressurization systems for cryogenic propellant tanks

computational fluid dynamics↗
DOE OSTI2022

Validation and parameterization of a novel physics-constrained neural dynamics model applied to turbulent fluid flow

We report, in fluid physics, data-driven models to enhance or accelerate time to solution are becoming increasingly popular for many application domains, such as alternatives to turbulence closures, system surrogates, or for new physics discovery. In the context of reduced order models of high-dimensional time-dependent fluid systems, machine learning methods grant the benefit of automated learning from data, but the burden of a model lies on its reduced-order representation of both the fluid state and physical dynamics. In this work, we build a physics-constrained, data-driven reduced order model for Navier–Stokes equations to approximate spatiotemporal fluid dynamics in the canonical case of isotropic turbulence in a triply periodic box. The model design choices mimic numerical and physical constraints by, for example, implicitly enforcing the incompressibility constraint and utilizing continuous neural ordinary differential equations for tracking the evolution of the governing differential equation. We demonstrate this technique on a three-dimensional, moderate Reynolds number turbulent fluid flow. In assessing the statistical quality and characteristics of the machine-learned model through rigorous diagnostic tests, we find that our model is capable of reconstructing the dynamics of the flow over large integral timescales, favoring accuracy at the larger length scales. More significantly, comprehensive diagnostics suggest that physically interpretable model parameters, corresponding to the representations of the fluid state and dynamics, have attributable and quantifiable impact on the quality of the model predictions and computational complexity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Computational fluid dynamics modeling and analysis of silica nanoparticle synthesis in a flame spray pyrolysis reactor

Flame Spray Pyrolysis (FSP) is a method for large-scale production of nanoparticles and nanoscale powders employed in a wide range of industrial applications. Particle size and morphology are complex functions of the physicochemical phenomena occurring in the FSP reactor. An extensive study of FSP-related phenomena can be utilized to develop effective strategies for achieving desired particle size/morphology and scaling up the overall yield of an FSP system. In this work, a computational fluid dynamics (CFD) model of an FSP reactor is developed to simulate the coupling of key phenomena involved in the particle synthesis process: liquid spray breakup and evaporation, mixing, combustion, and particle formation/growth of silica nanoparticles. Herein, the particle sizes and their distributions from the CFD simulations are validated against experimental data. Subsequently, the simulations are utilized to investigate the impact of process parameters on the resultant flame dynamics and particle growth. Firstly, the CFD results show that the particle sizes are strongly correlated with the precursor concentration in the solvent. At lower precursor concentrations, the spread of the distribution is relatively insensitive to the value of the concentration. At higher concentrations, the spread is higher as the collision probability between particles is higher. Secondly, increasing the pilot flow rate increases the length of the pilot flames impacting the local ignition location of the spray flame. Lastly, it is shown that the dispersion gas flow rate strongly influences the spray flame shape. This shape can be used for control of particle growth as it helps determine the regions of high temperature and the residence time of the particles in the high temperature region enabling the design and process optimization of the FSP reactor.

42 ENGINEERING↗
DOE OSTI2025

Stress evolution and creep deformation in solid-oxide electrolysis cell systems – Dynamic modeling and multi-objective optimization to maximize stack life and efficiency

Here, this study develops a thermal stress model of solid-oxide electrolysis cells (SOECs) including a model for creep strain and failure probability that is integrated with a dynamic plant-wide model of a hydrogen production process. Uncertainties in key material properties of the cell are quantified to assess their impact on stress profile variability. The oxygen electrode is found to have about 10 times higher failure probability compared to the fuel electrode. The study shows that if the stack operation is not optimized, cycling operation would lead to stress build-up eventually leading to catastrophic failure. A dynamic optimization problem is set up for obtaining the optimal operational profile considering a variable hydrogen production rate. Due to the tradeoff between the efficiency and stress build-up, the dynamic optimization problem is multi-objective. It is observed that the optimizer can considerably reduce the stress build-up (i.e., can increase the stack life) albeit at the cost of a lower efficiency thus exhibiting strong tradeoffs between capital and operating costs. For example, if the stack would be replaced in 0.5 yr, specific energy requirement would be 48.5 kWh/kg H 2 while for a stack replacement time of about 6 yr, the specific energy requirement rises by about 4.2 %.

SOEC↗
DOE OSTI2018

Beam dynamics modeling of the proton RFQ MEBT with CST Particle Studio

Beam dynamics in the Medium-Energy Beam Transfer (MEBT) after the new proton RFQ for the LANSCE injector is modeled with the CST Particle Studio PIC solver. The modeling uses the CST-calculated 3D EM fields of MEBT elements, which is important because (i) the beam size in MEBT is large, comparable to the beam-pipe aperture, and (ii) the fields of neighboring MEBT elements overlap. Our results indicate significant beam emittance growth not predicted by traditional beam dynamics codes.

43 PARTICLE ACCELERATORS↗