Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diamond”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Defect in diamond with millisecond-scale spin relaxation time at room temperature

Spin defects in diamond are promising platforms for quantum sensing. The longest electron spin relaxation times (T1) at room temperature for solid-state defects are observed in nitrogen vacancy centers in diamond, which can reach 6.67 ms [1], and substitutional nitrogen (“P1 centers”) in diamond, which exhibit a T1 of 2 ms [2]. No other solid-state defect has exhibited millisecond-scale spin relaxation times at room temperature thus far. Here, we characterize the spin properties of the WAR5 defect in diamond [3] with pulsed electron spin resonance. The observed T1 is one of the longest for solid-state spin defects: 0.97(27) ms at room temperature and 14.38(19) min at 4 K. The observed coherence time (T2) is 246(7) µs, which can be extended to 6.49(34) ms at 4 K with dynamical decoupling. Finally, we demonstrate optical spin polarization with a range of wavelengths from 405 nm to 500 nm and propose potential zero-phonon line candidates.

36 MATERIALS SCIENCE↗

Engineering diamond interfaces free of dark spins

Nitrogen-vacancy (NV) centers in diamond are utilized extensively as quantum sensors for imaging fields at the nanoscale. The ultrahigh sensitivity of NV magnetometers has enabled the detection and spectroscopy of individual electron spins, with potentially far-reaching applications in condensed matter physics, spintronics, and molecular biology. However, the surfaces of these diamond sensors naturally contain electron spins, which create a background signal that can be hard to differentiate from the signal of the target spins. In this study, we develop a surface modification approach that eliminates the unwanted signal of these so-called dark electron spins. Our surface passivation technique, based on coating diamond surfaces with a thin titanium oxide (Ti⁢O 2 ) layer, reduces the dark spin density. The observed reduction in dark spin density aligns with our findings on the electronic structure of the diamond-Ti⁢O 2 interface. The reduction, from a typical value of 2000 μm −2 to a value below that set by the detection limit of our NV sensors (200 μm −2 ), results in a twofold increase in Hahn-echo coherence time of near surface NV centers. Furthermore, we derive a comprehensive spin model that connects dark spin relaxation with NV coherence, providing additional insights into the mechanisms behind the observed spin dynamics. Our findings are directly transferable to other quantum platforms, including nanoscale solid-state qubits and superconducting qubits.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electron Beam Emission from a Diamond-Amplifier Cathode

The diamond amplifier (DA) is a new device for generating high-current, high-brightness electron beams. Our transmission-mode tests show that, with single-crystal, high-purity diamonds, the peak current density is greater than 400 mA/mm{sup 2}, while its average density can be more than 100 mA/mm{sup 2}. The gain of the primary electrons easily exceeds 200, and is independent of their density within the practical range of DA applications. We observed the electron emission. The maximum emission gain measured was 40, and the bunch charge was 50 pC/0.5 mm{sup 2}. There was a 35% probability of the emission of an electron from the hydrogenated surface in our tests. We identified a mechanism of slow charging of the diamond due to thermal ionization of surface states that cancels the applied field within it. We also demonstrated that a hydrogenated diamond is extremely robust.

43 PARTICLE ACCELERATORS↗

High Bragg reflectivity of diamond crystals exposed to multi-kW mm –2 X-ray beams

X-ray free-electron lasers in the oscillator configuration (XFELO) are future fully coherent hard X-rays sources with ultrahigh spectral purity. X-ray beams circulate in an XFELO optical cavity comprising diamond single crystals. They function as high-reflectance (close to 100%), narrowband (~10 meV) Bragg backscattering mirrors. The average power density of the X-ray beams in the XFELO cavity is predicted to be as high as ~10 kW mm –2 . Therefore, XFELO feasibility relies on the ability of diamond crystals to withstand such a high radiation load and preserve their high reflectivity. Here the endurance of diamond crystals to irradiation with multi-kW mm –2 power density X-ray beams is studied. It is shown that the high Bragg reflectivity of the diamond crystals is preserved after the irradiation, provided it is performed at ~1 × 10 –8 Torr high-vacuum conditions. In conclusion, irradiation under 4 × 10 –6 Torr results in a ~1 meV shift of the Bragg peak, which corresponds to a relative lattice distortion of 4 × 10 –8 , while the high Bragg reflectivity stays intact.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Small Bragg-plane slope errors revealed in synthetic diamond crystals

Wavefront-preserving X-ray diamond crystal optics are essential for numerous applications in X-ray science. Perfect crystals with flat Bragg planes are a prerequisite for wavefront preservation in Bragg diffraction. However, this condition is difficult to realize in practice because of inevitable crystal imperfections. Here, X-ray rocking curve imaging is used to study the smallest achievable Bragg-plane slope errors in the best presently available synthetic diamond crystals and how they compare with those of perfect silicon crystals. It is shown that the smallest specific slope errors in the best diamond crystals are about 0.08 (3) µrad mm -2 . These errors are only 50% larger than the 0.05 (2) µrad mm -2 specific slope errors measured in perfect silicon crystals. High-temperature annealing at 1450°C of almost flawless diamond crystals reduces the slope errors very close to those of silicon. Further investigations are in progress to establish the wavefront-preservation properties of these crystals.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Diamond channel-cut crystals for high-heat-load beam-multiplexing narrow-band X-ray monochromators

Next-generation high-brilliance X-ray photon sources call for new X-ray optics. Here we demonstrate the possibility of using monolithic diamond channel-cut crystals as high-heat-load beam-multiplexing narrow-band mechanically stable X-ray monochromators with high-power X-ray beams at cutting-edge high-repetition-rate X-ray free-electron laser (XFEL) facilities. The diamond channel-cut crystals fabricated and characterized in these studies are designed as two-bounce Bragg reflection monochromators directing 14.4 or 12.4 keV X-rays within a 15 meV bandwidth to 57 Fe or 45 Sc nuclear resonant scattering experiments, respectively. The crystal design allows out-of-band X-rays transmitted with minimal losses to alternative simultaneous experiments. Only ≲2% of the incident ∼100 W X-ray beam is absorbed in the 50 µm-thick first diamond crystal reflector, ensuring that the monochromator crystal is highly stable. Other X-ray optics applications of diamond channel-cut crystals are anticipated.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Polished diamond X-ray lenses

High-quality bi-concave 2D focusing diamond X-ray lenses of apex-radius R = 100 µm produced via laser-ablation and improved via mechanical polishing are presented here. Both for polished and unpolished individual lenses and for stacks of ten lenses, the remaining figure errors determined using X-ray speckle tracking are shown and these results are compared with those of commercial R = 50 µm beryllium lenses that have similar focusing strength and physical aperture. For two stacks of ten diamond lenses (polished and unpolished) and a stack of eleven beryllium lenses, this paper presents measured 2D beam profiles out of focus and wire scans to obtain the beam size in the focal plane. These results are complemented with small-angle X-ray scattering (SAXS) measurements of a polished and an unpolished diamond lens. Again, this is compared with the SAXS of a beryllium lens. The polished X-ray lenses show similar figure errors to commercially available beryllium lenses. While the beam size in the focal plane is comparable to that of the beryllium lenses, the SAXS signal of the polished diamond lenses is considerably lower.

47 OTHER INSTRUMENTATION↗

Nanopatterning of ultrananocrystalline diamond thin films via block copolymer lithography.

Nanopatterning of diamond surfaces is critical for the development of diamond-based microelectromechanical system/nanoelectromechanical system (MEMS/NEMS), such as resonators or switches. Micro-/nanopatterning of diamond materials is typically done using photolithography or electron beam lithography combined with reactive ion etching (RIE). In this work, we demonstrate a simple process, block copolymer (BCP) lithography, for nanopatterning of ultrananocrystalline diamond (UNCD) films to produce nanostructures suitable for the fabrication of NEMS based on UNCD. In BCP lithography, nanoscale self-assembled polymeric domains serve as an etch mask for pattern transfer. The authors used thin films of a cylinder-forming organic-inorganic BCP, poly(styrene-block-ferrocenyldimethylsilane), PS-b-PFS, as an etch mask on the surface of UNCD films. Orientational control of the etch masking cylindrical PFS blocks is achieved by manipulating the polymer film thickness in concert with the annealing treatment. We have observed that the surface roughness of UNCD layers plays an important role in transferring the pattern. Oxygen RIE was used to etch the exposed areas of the UNCD film underneath the BCP. Arrays of both UNCD posts and wirelike structures have been created using the same starting polymeric materials as the etch mask.

36 MATERIALS SCIENCE↗

Plasma-free hydrogenation of oxygen-terminated polycrystalline diamond as determined by circular transmission line measurements (CTLM)

Here, we developed a process to fully hydrogen-terminate diamond by annealing in forming gas. The surface was characterized using circular transmission line measurements (CTLMs) to evaluate the onset and degree of hydrogen termination. No hydrogenation occurred at temperatures at or below 500 °C. Hydrogenation occurs after annealing for 5 min at temperatures between 600 and 1000 °C, with complete hydrogenation achieved at 1000 °C, which showed the same sheet resistance as diamond terminated in a hydrogen plasma. Annealing at temperatures lower than 1000 °C resulted in only partial hydrogenation but can be compensated by increasing the anneal time. At temperatures exceeding 1100 °C, the sheet resistance suddenly and drastically increases, indicating instability of a hydrogen-terminated diamond surface at elevated temperatures under forming gas. The activation energy was determined to be 1.20eV. SEM inspection showed that annealing in hydrogen produced significantly reduced surface roughness compared to diamond surfaces hydrogenated in a H 2 plasma.

36 MATERIALS SCIENCE↗

A novel synthetic single crystal diamond device for in vivo dosimetry

Purpose: Aim of the present work is to evaluate the synthetic single crystal diamond Schottky photodiode developed at the laboratories of “Tor Vergata” University in Rome in a new dosimeter configuration specifically designed for offline wireless in vivo dosimetry (IVD) applications. Methods: The new diamond based dosimeter, single crystal diamond detector (SCDD-iv), consists of a small unwired detector and a small external reading unit that can be connected to commercial electrometers for getting the detector readout after irradiation. Two nominally identical SCDD-iv dosimeter prototypes were fabricated and tested. A basic dosimetric characterization of detector performances relevant for IVD application was performed under irradiation with {sup 60}Co and 6 MV photon beams. Preirradiation procedure, response stability, short and long term reproducibility, leakage charge, fading effect, linearity with dose, dose rate dependence, temperature dependence, and angular response were investigated. Results: The SCDD-iv is simple, with no cables linked to the patient and the readout is immediate. The range of response with dose has been tested from 1 up to 12 Gy; the reading is independent of the accumulated dose and dose rate independent in the range between about 0.5 and 5 Gy/min; its temperature dependence is within 0.5% between 25 and 38 °C, and its directional dependence is within 2% from 0° to 90°. The combined relative standard uncertainty of absorbed dose to water measurements is estimated lower than the tolerance and action level of 5%. Conclusions: The reported results indicate the proposed novel offline dosimeter based on a synthetic single crystal diamond Schottky photodiode as a promising candidate for in vivo dosimetry applications with photon beams.

07 ISOTOPE AND RADIATION SOURCES↗

Crystal-Chemical Features of Diamonds Implanted with Helium Ions

Implantation of high-energy helium ions into crystals of natural colorless diamonds colors them bright yellow, brown, or black, depending on the implantation dose. The nature of the induced fantasy color and crystal-chemical features of the implanted diamonds have been investigated by IR spectroscopy and Raman spectroscopy. It is established that the radiation effect of helium ions on the diamond crystal structure results in the transformation of nitrogen-vacancy centers in its bulk with the formation of new A-type color centers, as well as the formation of carbon nanoclusters with the sp{sup 2} hybridization of bonds (which is typical of graphite) in black diamonds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical and paramagnetic properties of synthetic diamond crystals irradiated with electrons and annealed

The optical and paramagnetic properties of single crystals of synthetic diamond grown by the temperature-gradient method in high-pressure apparatuses with the systems of catalytic solvents (Co, Fe) and (Ni, Fe) are studied at room temperature. The optical absorption spectra (in the wavelength range {lambda} = 400-800 nm) and the spectra of electron spin resonance are registered for the initial diamond crystals, the crystals irradiated with 6 MeV electrons (the fluence 1.5 x 10{sup 18} cm{sup -2}), and the irradiated diamonds subjected to isochronous thermal annealing in vacuum (for 60 min). It is shown that, with such treatment, the diamond crystals synthesized with different metal catalysts (Co or Ni) exhibit similar optical properties, but different paramagnetic properties. The data obtained by infrared spectroscopy and electron spin resonance spectroscopy are coincident for radiation defects and different for nitrogen centers (the P1 centers and exchange-coupled pairs of nitrogen atoms). The spectra of the electron spin resonance of the samples annealed at temperatures below 1273 K (in the case of the Co-containing catalyst) and 1073 K (in the case of Ni-containing catalyst) exhibited broad lines produced by residual impurities of the catalyst metal and were accompanied by a distortion of the spectrum of paramagnetic nitrogen in the form of a tilt of the ESR spectra with respect to the zero line.

36 MATERIALS SCIENCE↗

Ohmic Contacts to CVD Diamond with Boron-Doped Delta Layers

Various methods for the formation of ohmic contacts to boron-doped δ layers in CVD-diamond epitaxial structures are investigated. In the first variant, an additional thin heavily doped layer was formed on the diamond surface to which an ohmic contact is formed. Then, the surface p{sup +} layer between the contact pads is etched out; therefore, the current in the structure flows only through a buried δ layer. In the second approach, the doped diamond selectively grows in the contact windows under a metallic mask after preliminary etching of the undoped diamond layer (cap) up to the δ layer. In this case, the heavily doped p{sup +} layer forms an end contact to the δ layer. These two variants differ in terms of the conditions of applicability, the complexity of the manufacturing technology, the value of the contact resistance, and can be used to solve problems in which it is necessary to have a different quality of the contacts, such as the formation of transistor structures or test cells for measuring physical characteristics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sharp Drop in the Mobility of Holes with a Decrease in Their Two-Dimensional Concentration by an External Voltage in Boron δ-Doped Diamond Layers

It is shown, both analytically and numerically, that the hole mobility in boron δ-doped (i.e., with a thickness on the order of several lattice constants) diamond layers drops with a decrease in their two-dimensional concentration during depletion of the δ-doped layer by an external voltage. This drop is most pronounced for the maximum initial two-dimensional hole concentrations ~ 3 × 10{sup 13} cm{sup –2} (limited from above by the condition for the possibility of their significant reduction without the electrical breakdown of diamond). This is explained by a decrease in the degree of screening of scattering Coulomb potentials of ionized boron atoms and an increase in the scattering efficiency of degenerate holes from these atoms due to a drop in the kinetic energy of holes. The corresponding calculations of the transport scattering cross section of holes are performed beyond the Born approximation (i.e., perturbation theory), which is inapplicable for boron δ-doped diamond layers. The predicted effect can be used to increase the efficiency of source-to-drain current modulation by a gate voltage in diamond field-effect transistors (FETs) with δ-doped conduction channels.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modeling of Phase Transitions of Graphites to Diamond-Like Phases

The method of the density functional theory is used to study structural transformations between graphites and diamond-like phases. The calculations have been carried out in two approximations: a local density approximation and a generalized gradient approximation. It is found that the phase transitions of hexagonal graphene layers to a cubic diamond and diamond-like phases must occur at uniaxial compressions of ~57–71 GPa, whereas some diamond-like phases can be obtained from tetragonal graphene layers at significantly lower pressures of 32–52 GPa. The X-ray diffraction patterns have been calculated for the phase transition of graphite I4{sub 1}/amd to tetragonal LA10 phase that takes place at the minimum pressure that can be used for experimental identification of these compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Variation of the {sup 13}C Diamond Properties under Isothermal Compression

The parameters of atomic interaction pair potential for {sup 13}C diamond have been determined from experimental data on the ratio of Raman frequencies for isotopically different diamonds. Based on these parameters, an equation of state and baric dependences of {sup 13}C diamond lattice properties at 300 K have been calculated. Specifically, the Debye temperature; the first, second, and third Grüneisen parameters; elastic modulus; thermal expansion coefficient; heat capacity; surface energy; and pressure derivatives of these parameters along a 300 K isotherm have been determined. The results have been compared with available data for diamond having a natural isotopic composition, i.e., for {sup 12.01}C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Materials challenges for quantum technologies based on color centers in diamond

Emerging quantum technologies require precise control over quantum systems of increasing complexity. Defects in diamond, particularly the negatively charged nitrogen-vacancy center, are a promising platform with the potential to enable technologies ranging from ultra-sensitive nanoscale quantum sensors, to quantum repeaters for long distance quantum networks, to simulators of complex dynamical processes in many-body quantum systems, to scalable quantum computers. While these advances are due in large part to the distinct material properties of diamond, the uniqueness of this material also presents difficulties, and there is a growing need for novel materials science techniques for characterization, growth, defect control, and fabrication dedicated to realizing quantum applications with diamond. In this article we identify and discuss the major materials science challenges and opportunities associated with diamond quantum technologies.

36 MATERIALS SCIENCE↗

Corrosive Resistant Diamond Coatings for the Acid Based Thermo-Chemical Hydrogen Cycles

This project was designed to test diamond, diamond-like and related materials in environments that are expected in thermochemical cycles. Our goals were to build a High Temperature Corrosion Resistance (HTCR) test stand and begin testing the corrosive properties of barious materials in a high temperature acidic environment in the first year. Overall, we planned to test 54 samples each of diamond and diamond-like films (of 1 cm x 1 cm area). In addition we use a corrosion acceleration method by treating the samples at a temperature much larger than the expected operating temperature. Half of the samples will be treated with boron using the FEDOA process.

08 HYDROGEN↗