Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density maps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Pseudounitary freedom in the operator-sum representation

A dynamical map is a map that takes one density operator to another. Such a map can be written in an operator-sum representation (OSR) by using a spectral decomposition. The method of construction applies to general maps, which need not be completely positive. The OSR is not unique; there is freedom to choose a different set of operators in the OSR, yet still obtain the same map. Here, we show that, whereas the freedom for completely positive maps is unitary, the freedom for maps that are not necessarily completely positive is pseudounitary.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mineral density volume gradients in normal and diseased human tissues

Clinical computed tomography provides a single mineral density (MD) value for heterogeneous calcified tissues containing early and late stage pathologic formations. The novel aspect of this study is that, it extends current quantitative methods of mapping mineral density gradients to three dimensions, discretizes early and late mineralized stages, identifies elemental distribution in discretized volumes, and correlates measured MD with respective calcium (Ca) to phosphorus (P) and Ca to zinc (Zn) elemental ratios. To accomplish this, MD variations identified using polychromatic radiation from a high resolution micro-computed tomography (micro-CT) benchtop unit were correlated with elemental mapping obtained from a microprobe X-ray fluorescence (XRF) using synchrotron monochromatic radiation. Digital segmentation of tomograms from normal and diseased tissues (N=5 per group; 40-60 year old males) contained significant mineral density variations (enamel: 2820-3095mg/cc, bone: 570-1415mg/cc, cementum: 1240-1340mg/cc, dentin: 1480-1590mg/cc, cementum affected by periodontitis: 1100-1220mg/cc, hypomineralized carious dentin: 345-1450mg/cc, hypermineralized carious dentin: 1815-2740mg/cc, and dental calculus: 1290-1770mg/cc). A plausible linear correlation between segmented MD volumes and elemental ratios within these volumes was established, and Ca/P ratios for dentin (1.49), hypomineralized dentin (0.32-0.46), cementum (1.51), and bone (1.68) were observed. Furthermore, varying Ca/Zn ratios were distinguished in adapted compared to normal tissues, such as in bone (855-2765) and in cementum (595-990), highlighting Zn as an influential element in prompting observed adaptive properties. Hence, results provide insights on mineral density gradients with elemental concentrations and elemental footprints that in turn could aid in elucidating mechanistic processes for pathologic formations.

59 BASIC BIOLOGICAL SCIENCES↗

Generating accurate density matrices on the tangent space of a Grassmann manifold

Interpolating a density matrix from a set of known density matrices is not a trivial task. This is because a linear combination of density matrices does not necessarily correspond to another density matrix. In this Communication, density matrices are examined as objects of a Grassmann manifold. Although this manifold is not a vector space, its tangent space is a vector space. As a result, one can map the density matrices on this manifold to their corresponding vectors in the tangent space and then perform interpolations on that tangent space. The resulting interpolated vector can be mapped back to the Grassmann manifold, which can then be utilized (1) as an optimal initial guess for a self-consistent field (SCF) calculation or (2) to derive energy directly without time-consuming SCF iterations. Such a promising approach is denoted as Grassmann interpolation (G-Int). The hydrogen molecule has been used to illustrate that the described interpolated method in this work preserves the essential attributes of a density matrix. For phosphorus mononitride and ferrocene, it was demonstrated numerically that reference points for the definition of the corresponding tangent spaces can be chosen arbitrarily. In addition, the interpolated density matrices provide a superior and essentially converged initial guess for an SCF calculation to make the SCF procedure itself unnecessary. Finally, this accurate, efficient, robust, and systematically improved G-Int strategy has been used for the first time to generate highly accurate potential energy surfaces with fine details for the difficult case, ferrocene.

Chemistry↗

A Study of the Non-Thermal X-ray Emission of Shell-Type Supernova Remnants

The term of the forth year of the award is the period from March 15, 2003 to March 14, 2004. During this year, Dr. Thomas Pannuti, who had been performing most of the analyses, made a transition to a new position at Caltech. As of September 2003, Dr. Michael Stage began performing most of the analyses. Dr. Stage has begun constructing a detailed catalog of the spatial and spectral properties of young supernova remnants as described in sections 1 and 4 of the proposal. Specifically, he has focused on the analysis of Chandra ACIS data. The exquisite spatial resolution of the Chandra telescope and the modest spectral resolution of the CCDs make these data ideal. Dr. Stage has developed a standard set of procedures to reduce the data, generate telescope and detector response libraries and handle instrumental and celestial background subtraction. He has also adapted some existing code to automate spectral extraction and fitting. This code enables us to analyze the spectra of tens of thousands of small subregions of supernova remnants. Dr. Stage has recently applied this process to ACIS data for the supernova remnants Cas A and Kepler. The results include maps of the fitted parameters, such as individual line intensities and centroids (i.e. Doppler shifts), the electron temperature, and the absorption column density. These maps are more accurate than simple energy-cut images because it is difficult (and sometimes impossible) to cleanly separate the line emission from the underlying continuum (especially at low energies). It is now possible to identify the locations at which emission from each element is produced. Some of the elements are seen to be layered. The electron temperature maps demonstrate that the outer edges of Cas A and Kepler are very hot with weak lines. This emission is almost certainly synchrotron dominated. Therefore, not only are the maps interesting in and of themselves, but they also provide an unbiased means of easily identifying features in the remnants that can be studied in more detail using, for example, synchrotron models. Over the next year, Dr. Stage will refine the analysis procedures, expand the analyses to include several other remnants, present the results at major scientific conferences and publish a catalog of the results. Since this work is producing impressive results, we have applied for very long Chandra observations of Kepler and Tycho to obtain enough counts to take lull advantage of the technique. A i Ms observation of Cas A is already scheduled. Over the past year, I completed a joint, spectra,l analysis of some X-ray, radio, and gamma-ray data for the supernova remnant SN 1006. The results of this analysis show that the synchrotron and, hence, electron spectrum of the remnant is curved. The amount of curvature in the electron spectrum is quantitatively consistent with predictions of the amount of curvature in the proton spectrum of the remnant. A paper describing this work is nearly complete. When Dr. Pannuti left, he was analyzing X-ray data for the young supernova remnant G266.2-1.2. Dr. Pannuti found the first evidence of thermal X-ray emission from this remnant. Furthermore, like SN 1006, the cutoff frequency varies with azimuth along the bright northeastern rim. This work will be published during the coming year.

Allen, Glenn E.↗

Infrared and radio measurements of the density structure of compact H II regions

The density structure of compact H II regions is studied by comparing the ratio of the S III forbidden 33.47-micron and 18.71-micron emission lines and 5-GHz continuum maps. Electron densities are computed for DR 22, G29.9 - 0.0, G75.84 + 0.4, M8, M42, S158, W3, and W33. For DR 22, M42, and W3, the electron densities determined from the IR data are consistent with those derived from radio observations. The densities for S158 and M8 are quite low, implying that the S III emission is dominated by the diffuse ionized gas observed in the radio continuum. For G29.9 - 0.0, G75.84 + 0.4, and W33, the S III data give higher densities than predicted from radio observations. This implies that either these nebulae are filled with dense clumps of ionized gas which are not resolved in the radio maps, or that the S III zone is confined to the small, dense cores found in the radio maps of all three nebulae.

Megeath, S. T.↗

Artificial Neural Networks as Mappings between Proton Potentials, Wave Functions, Densities, and Energy Levels

We report artificial neural networks (ANNs) have become important in quantum chemistry. Herein, applications to nuclear quantum effects, such as zero-point energy, vibrationally excited states, and hydrogen tunneling, are explored. ANNs are used to solve the time-independent Schrödinger equation for single- and double-well potentials representing hydrogen-bonded molecular systems capable of proton transfer. ANN mappings are trained to predict the lowest five proton vibrational energies, wave functions, and densities from the proton potentials and to predict the excited state proton vibrational energies and densities from the proton ground state density. For the inverse problem, ANN mappings are trained to predict the proton potential from the proton vibrational energy levels or the proton ground state density. This latter mapping is theoretically justified by the first Hohenberg-Kohn theorem establishing a one-to-one correspondence between the external potential and the ground state density. ANNs for two- and three-dimensional systems are also presented to illustrate the straightforward extension to higher dimensions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insights from Synthetic Star-forming Regions. II. Verifying Dust Surface Density, Dust Temperature, and Gas Mass Measurements With Modified Blackbody Fitting

We use a large data set of realistic synthetic observations (produced in Paper I of this series) to assess how observational techniques affect the measurement physical properties of star-forming regions. In this part of the series (Paper II), we explore the reliability of the measured total gas mass, dust surface density and dust temperature maps derived from modified blackbody fitting of synthetic Herschel observations. We find from our pixel-by-pixel analysis of the measured dust surface density and dust temperature a worrisome error spread especially close to star formation sites and low-density regions, where for those “contaminated” pixels the surface densities can be under/overestimated by up to three orders of magnitude. In light of this, we recommend to treat the pixel-based results from this technique with caution in regions with active star formation. In regions of high background typical in the inner Galactic plane, we are not able to recover reliable surface density maps of individual synthetic regions, since low-mass regions are lost in the far-infrared background. When measuring the total gas mass of regions in moderate background, we find that modified blackbody fitting works well (absolute error: + 9%; −13%) up to 10 kpc distance (errors increase with distance). Commonly, the initial images are convolved to the largest common beam-size, which smears contaminated pixels over large areas. The resulting information loss makes this commonly used technique less verifiable as now χ {sup 2} values cannot be used as a quality indicator of a fitted pixel. Our control measurements of the total gas mass (without the step of convolution to the largest common beam size) produce similar results (absolute error: +20%; −7%) while having much lower median errors especially for the high-mass stellar feedback phase. In upcoming papers (Paper III; Paper IV) of this series we test the reliability of measured star formation rate with direct and indirect techniques.

79 ASTRONOMY AND ASTROPHYSICS↗

Genetic architecture of leaf morphological and physiological traits in a Populus deltoides ‘Danhong’ × P. simonii ‘Tongliao1’ pedigree revealed by quantitative trait locus analysis

Understanding the genetic architecture of leaf morphological and physiological traits will help plant breeders develop high biomass poplar genotypes. Quantitative trait locus (QTL) studies combining next-generation sequencing techniques can advance our understanding of the genetic basis of complex traits. In this study, we measured 13 leaf morphological and physiological traits and identified quantitative trait loci (QTLs) in a Populus deltoides ‘Danhong’ × P. simonii ‘Tongliao1’ F1 population (500 progenies) using a high-density genetic map constructed by whole genome re-sequencing. This linkage map consisted of 5796 single nucleotide polymorphism (SNP) markers assigned to 19 linkage groups (LGs), spanning 2683.80 centimorgans (cM) of genetic length, with an average marker density of 0.46 cM. We identified 109 QTLs on 18 LGs for leaf morphological traits and 55 QTLs on 14 LGs for leaf physiological traits. One-hundred eight putative candidate genes were identified within the candidate genomic region. Co-expression network and gene ontology enrichment analyses suggested that these candidate genes were involved in the photosynthetic process. The differential expression patterns of the CYCLIN (Potri.015G112200) and RED CHLOROPHYLL REDUCTASE (Potri.007G043600) genes between two parents indicated their potential roles in leaf morphological and physiological traits. These findings decipher the genetic architecture of leaf morphological and physiological traits in the P. deltoides ‘Danhong’ × P. simonii ‘Tongliao1’ pedigree and provide candidate genes for future poplar genetic improvement.

59 BASIC BIOLOGICAL SCIENCES↗

Tomography of atomic number and density of materials using dual-energy imaging and the Alvarez and Macovski attenuation model

Dual-energy computed tomography and the Alvarez and Macovski [Phys. Med. Biol. 21, 733 (1976)] transmitted intensity (AMTI) model were used in this study to estimate the maps of density (ρ) and atomic number (Z) of mineralogical samples. In this method, the attenuation coefficients are represented [Alvarez and Macovski, Phys. Med. Biol. 21, 733 (1976)] in the form of the two most important interactions of X-rays with atoms that is, photoelectric absorption (PE) and Compton scattering (CS). This enables material discrimination as PE and CS are, respectively, dependent on the atomic number (Z) and density (ρ) of materials [Alvarez and Macovski, Phys. Med. Biol. 21, 733 (1976)]. Dual-energy imaging is able to identify sample materials even if the materials have similar attenuation coefficients at single-energy spectrum. We use the full model rather than applying one of several applied simplified forms [Alvarez and Macovski, Phys. Med. Biol. 21, 733 (1976); Siddiqui et al., SPE Annual Technical Conference and Exhibition (Society of Petroleum Engineers, 2004); Derzhi, U.S. patent application 13/527,660 (2012); Heismann et al., J. Appl. Phys. 94, 2073–2079 (2003); Park and Kim, J. Korean Phys. Soc. 59, 2709 (2011); Abudurexiti et al., Radiol. Phys. Technol. 3, 127–135 (2010); and Kaewkhao et al., J. Quant. Spectrosc. Radiat. Transfer 109, 1260–1265 (2008)]. This paper describes the tomographic reconstruction of ρ and Z maps of mineralogical samples using the AMTI model. The full model requires precise knowledge of the X-ray energy spectra and calibration of PE and CS constants and exponents of atomic number and energy that were estimated based on fits to simulations and calibration measurements. The estimated ρ and Z images of the samples used in this paper yield average relative errors of 2.62% and 1.19% and maximum relative errors of 2.64% and 7.85%, respectively. Furthermore, we demonstrate that the method accounts for the beam hardening effect in density (ρ) and atomic number (Z) reconstructions to a significant extent.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Daphnia magna transcriptome by RNA-Seq across 12 environmental stressors

The full exploration of gene-environment interactions requires model organisms with well-characterized ecological interactions in their natural environment, manipulability in the laboratory and genomic tools. The waterflea Daphnia magna is an established ecological and toxicological model species, central to the food webs of freshwater lentic habitats and sentinel for water quality. Its tractability and cyclic parthenogenetic life-cycle are ideal to investigate links between genes and the environment. Capitalizing on this unique model system, the STRESSFLEA consortium generated a comprehensive RNA-Seq data set by exposing two inbred genotypes of D. magna and a recombinant cross of these genotypes to a range of environmental perturbations. Gene models were constructed from the transcriptome data and mapped onto the draft genome of D. magna using EvidentialGene. The transcriptome data generated here, together with the available draft genome sequence of D. magna and a high-density genetic map will be a key asset for future investigations in environmental genomics.

59 BASIC BIOLOGICAL SCIENCES↗

Genomic dissection of anthracnose resistance response in sorghum [ Sorghum bicolor (L.) Moench]

Sorghum [ Sorghum bicolor (L.) Moench] is the fifth most important grain crop behind maize, wheat, rice, and barley. Today, it is of interest as a source of fermentable sugars for the production of renewable fuels and chemicals, and as a source of biomass for co-firing. The productivity and profitability of sorghum are limited by several biotic constraints, most notably anthracnose caused by the fungal pathogen Colletotrichum sublineolum . The most cost-effective and environmentally benign strategy to control anthracnose is through the incorporation of resistance genes. Over the last three years, our research efforts have been directed to identify new sources of resistance in temperate adapted and tropical germplasm, and to delimited genomic regions associated with the observe anthracnose resistant response. Three biparental mapping populations derived from the resistant lines SC112-14, QL3 and IS18760 were evaluated for anthracnose resistance response in Texas, Georgia, Florida and Puerto Rico. In parallel, three high density recombination maps were constructed and used to identify resistant loci. Anthracnose resistant response in line SC112-14 is controlled by a major locus on chromosome 5. Segregation analysis of 1,500 progenies delimited the resistance locus on chromosome 5 to a 23-kb region harboring three candidate genes, including Sobic.005G17230 identified by GWAS of the sorghum association panel (SAP). The latter gene belongs to a family of genes encoding F-box proteins indicating that this resistance response involved in signaling cascades and transcriptional reprograming, rather than recognition of pathotype-associated molecular patterns. In contrast, anthracnose resistant response in lines QL3 and IS18760 is controlled by multiple small-effect genes. Greenhouse evaluation of a representative subset of the three mapping populations against nine pathotypes found that lines susceptible in the field could be resistant to a single pathotype in the greenhouse. Thus, the activation of a resistance response system by a single pathotype could not provide a broader resistance response against multiple pathotypes. The screening of 1,801 sweet sorghum accessions from the National Plant Germplasm System identified 654 accessions with Brix value larger than 10, which in turn was used to select a subset of 233 accessions for evaluation of anthracnose resistant response. Even though most of the accessions were not completely infected by anthracnose, 28 accessions were completely resistant against pathotypes from Texas, Georgia, Florida and Puerto Rico. Genotyping-by-sequencing analysis of this subset identified 157,843 single nucleotide polymorphisms. Population structure analysis of the subset based on a subset of 2,345 unlinked SNPs found that the genetic diversity could be divided into four populations. The genetic relatedness among accessions within populations suggests most of the resistant germplasm may contain few different resistance sources. These resistance sources present in sweet sorghum germplasm could expedite the development of new resistant sweet sorghum cultivars and hybrids by avoiding time-consuming introgression breeding approaches with non-sweet sorghums serving as donor of the resistance alleles.

59 BASIC BIOLOGICAL SCIENCES↗

Genomic dissection of anthracnose resistance response in sorghum [Sorghum bicolor (L.) Moench]

Sorghum [Sorghum bicolor (L.) Moench] is the fifth most important grain crop behind maize, wheat, rice, and barley. Today, it is of interest as a source of fermentable sugars for the production of renewable fuels and chemicals, and as a source of biomass for co-firing. The productivity and profitability of sorghum are limited by several biotic constraints, most notably anthracnose caused by the fungal pathogen Colletotrichum sublineolum. The most cost-effective and environmentally benign strategy to control anthracnose is through the incorporation of resistance genes. Over the last three years, our research efforts have been directed to identify new sources of resistance in temperate adapted and tropical germplasm, and to delimited genomic regions associated with the observe anthracnose resistant response. Three biparental mapping populations derived from the resistant lines SC112-14, QL3 and IS18760 were evaluated for anthracnose resistance response in Texas, Georgia, Florida and Puerto Rico. In parallel, three high density recombination maps were constructed and used to identify resistant loci. Anthracnose resistant response in line SC112-14 is controlled by a major locus on chromosome 5. Segregation analysis of 1,500 progenies delimited the resistance locus on chromosome 5 to a 23-kb region harboring three candidate genes, including Sobic.005G17230 identified by GWAS of the sorghum association panel (SAP). The latter gene belongs to a family of genes encoding F-box proteins indicating that this resistance response involved in signaling cascades and transcriptional reprograming, rather than recognition of pathotype-associated molecular patterns. In contrast, anthracnose resistant response in lines QL3 and IS18760 is controlled by multiple small-effect genes. Greenhouse evaluation of a representative subset of the three mapping populations against nine pathotypes found that lines susceptible in the field could be resistant to a single pathotype in the greenhouse. Thus, the activation of a resistance response system by a single pathotype could not provide a broader resistance response against multiple pathotypes. The screening of 1,801 sweet sorghum accessions from the National Plant Germplasm System identified 654 accessions with Brix value larger than 10, which in turn was used to select a subset of 233 accessions for evaluation of anthracnose resistant response. Even though most of the accessions were not completely infected by anthracnose, 28 accessions were completely resistant against pathotypes from Texas, Georgia, Florida and Puerto Rico. Genotyping-by-sequencing analysis of this subset identified 157,843 single nucleotide polymorphisms. Population structure analysis of the subset based on a subset of 2,345 unlinked SNPs found that the genetic diversity could be divided into four populations. The genetic relatedness among accessions within populations suggests most of the resistant germplasm may contain few different resistance sources. These resistance sources present in sweet sorghum germplasm could expedite the development of new resistant sweet sorghum cultivars and hybrids by avoiding time-consuming introgression breeding approaches with non-sweet sorghums serving as donor of the resistance alleles.

59 BASIC BIOLOGICAL SCIENCES↗

Genomic dissection of anthracnose resistance response in sorghum [ Sorghum bicolor (L.) Moench]

Sorghum [Sorghum bicolor (L.) Moench] is the fifth most important grain crop behind maize, wheat, rice, and barley. Today, it is of interest as a source of fermentable sugars for the production of renewable fuels and chemicals, and as a source of biomass for co-firing. The productivity and profitability of sorghum are limited by several biotic constraints, most notably anthracnose caused by the fungal pathogen Colletotrichum sublineolum. The most cost-effective and environmentally benign strategy to control anthracnose is through the incorporation of resistance genes. Over the last three years, our research efforts have been directed to identify new sources of resistance in temperate adapted and tropical germplasm, and to delimited genomic regions associated with the observe anthracnose resistant response. Three biparental mapping populations derived from the resistant lines SC112-14, QL3 and IS18760 were evaluated for anthracnose resistance response in Texas, Georgia, Florida and Puerto Rico. In parallel, three high density recombination maps were constructed and used to identify resistant loci. Anthracnose resistant response in line SC112-14 is controlled by a major locus on chromosome 5. Segregation analysis of 1,500 progenies delimited the resistance locus on chromosome 5 to a 23-kb region harboring three candidate genes, including Sobic.005G17230 identified by GWAS of the sorghum association panel (SAP). The latter gene belongs to a family of genes encoding F-box proteins indicating that this resistance response involved in signaling cascades and transcriptional reprograming, rather than recognition of pathotype-associated molecular patterns. In contrast, anthracnose resistant response in lines QL3 and IS18760 is controlled by multiple small-effect genes. Greenhouse evaluation of a representative subset of the three mapping populations against nine pathotypes found that lines susceptible in the field could be resistant to a single pathotype in the greenhouse. Thus, the activation of a resistance response system by a single pathotype could not provide a broader resistance response against multiple pathotypes. The screening of 1,801 sweet sorghum accessions from the National Plant Germplasm System identified 654 accessions with Brix value larger than 10, which in turn was used to select a subset of 233 accessions for evaluation of anthracnose resistant response. Even though most of the accessions were not completely infected by anthracnose, 28 accessions were completely resistant against pathotypes from Texas, Georgia, Florida and Puerto Rico. Genotyping-by-sequencing analysis of this subset identified 157,843 single nucleotide polymorphisms. Population structure analysis of the subset based on a subset of 2,345 unlinked SNPs found that the genetic diversity could be divided into four populations. The genetic relatedness among accessions within populations suggests most of the resistant germplasm may contain few different resistance sources. These resistance sources present in sweet sorghum germplasm could expedite the development of new resistant sweet sorghum cultivars and hybrids by avoiding time-consuming introgression breeding approaches with non-sweet sorghums serving as donor of the resistance alleles.

09 BIOMASS FUELS↗

Quantitative trait locus mapping combined with variant and transcriptome analyses identifies a cluster of gene candidates underlying the variation in leaf wax between upland and lowland switchgrass ecotypes

Switchgrass (Panicum virgatum L.) is a promising warm-season candidate energy crop. It occurs in two ecotypes, upland and lowland, which vary in a number of phenotypic traits, including leaf glaucousness. To initiate trait mapping, two F 2 mapping populations were developed by crossing two different F 1 sibs derived from a cross between the tetraploid lowland genotype AP13 and the tetraploid upland genotype VS16, and high-density linkage maps were generated. Quantitative trait locus (QTL) analyses of visually scored leaf glaucousness and of hydrophobicity of the abaxial leaf surface measured using a drop shape analyzer identified highly significant colocalizing QTL on chromosome 7K (Chr07K). Using a multipronged approach, we identified a cluster of genes including Pavir.7KG077009, which encodes a Type III polyketide synthase-like protein, and Pavir.7KG013754 and Pavir.7KG030500, two highly similar genes that encode putative acyl-acyl carrier protein (ACP) thioesterases, as strong candidates underlying the QTL. The lack of homoeologs for any of the three genes on Chr07N, the relatively low level of identity with other switchgrass KCS proteins and thioesterases, as well as the organization of the surrounding region suggest that Pavir.7KG077009 and Pavir.7KG013754/Pavir.7KG030500 were duplicated into a fast-evolving chromosome region, which led to their neofunctionalization. Furthermore, sequence analyses showed all three genes to be absent in the two upland compared to the two lowland accessions analyzed. This study provides an example of and practical guide for trait mapping and candidate gene identification in a complex genetic system by combining QTL mapping, transcriptomics and variant analysis.

59 BASIC BIOLOGICAL SCIENCES↗

Intermolecular Interactions in Direct Air Capture Materials: Insights from Charge Density Analysis

Direct air capture (DAC) materials enable the removal of CO 2 from the atmosphere, but improving their efficiency requires a detailed understanding of the intermolecular interactions that govern CO 2 sorption and release. Here, we present an experimental electron density study of methylglyoxal-bis(iminoguanidine) (MGBIG), a promising DAC material, using high-resolution X-ray and neutron diffraction data combined with quantum crystallographic analysis. This approach bridges theoretical and experimental data by quantifying electron density distributions and revealing how hydrogen bonds stabilize CO 2 -derived carbonate phases and may influence the desorption behavior. We identify distinct hydrogen-bonding environments in two crystalline carbonate phases: P1, a transient kinetic product, and P3, a thermodynamically stable phase. Multipolar refinement and electrostatic potential and multipole moment calculations precisely map electron density distributions, revealing key hydrogen bonds involved in CO 2 capture. Topological analysis of electron density highlights a cooperative hydrogen-bonding network in the thermodynamically favored P3 phase, where enhanced electron density delocalization and water-mediated interactions contribute to a more stable lattice. Energetic analyses confirm that stronger hydrogen bonding networks enhance the stability of P3 with a binding energy of −607.0 kJ/mol and greater lattice stability (−847.3 kJ/mol) compared to P1 (−302.5 and −571.0 kJ/mol, respectively). Electrostatic potential maps further illustrate polarization patterns that may influence the stability of the binding of CO 2 and release conditions. These findings establish a direct experimental framework for linking electron density distributions to intermolecular interactions in DAC materials, providing a rational design strategy for optimizing sorbents with improved CO 2 capture efficiency and reduced energy demands.

Electron density↗

EWTN: Quantifying Mass Transport to Enable Water Electrolyzer Architectures with Low Flow-Rate Sensitivity

To develop cost-effective and high-performing polymer electrolyte water electrolyzers (PEWEs) for gigawatt-scale applications, researchers have focused on reducing precious metal catalyst loadings and optimizing porous transport layers. However, the performance of PEWEs is also affected by system architecture. Mass transport losses are dependent on localized architecture and material interactions. In-situ measurements, such as current density distribution maps have demonstrated advantages in understanding the intricate characteristics and influence of two-phase flow within PEWEs. This study proposes the parameter of effective water transport number (EWTN) as a quantitative tool to investigate such current density distribution (CDD) measurements for PEWEs. Results show that higher flow-rates have EWTN values of 0.95 and above, indicating no mass transport limitations; while lower flow-rates with large gradients CDD have EWTN values between 0.6-0.8, indicating mass transport limited conditions. The new analysis also identified a correlation between mass transport losses due to bubble accumulation, membrane hydration, and ohmic overpotentials. To address these limitations, an unitized pin-type LGDL/flow-field design was developed, which effectively prevents local gas phase accumulation, resulting in improved mass transport characteristics. The results of this work show reduced flow-rate sensitivity with the pin-type architecture and ∼13% increased performance at 0.24 ml / min / cm 2 .

Electrochemistry↗

Time resolved interferometric study of the plasma plume induced shock wave in confined geometry: Two-dimensional mapping of the ambient and plasma density

An experimental investigation of the laser produced plasma induced shock wave in the presence of confining walls placed along the axial as well as the lateral direction has been performed. A time resolved Mach Zehnder interferometer is set up to track the primary as well as the reflected shock waves and its effect on the evolving plasma plume has been studied. An attempt has been made to discriminate the electronic and medium density contributions towards the changes in the refractive index of the medium. Two dimensional spatial distributions for both ambient medium density and plasma density (electron density) have been obtained by employing customised inversion technique and algorithm on the recorded interferograms. The observed density pattern of the surrounding medium in the presence of confining walls is correlated with the reflected shock wave propagation in the medium. Further, the shock wave plasma interaction and the subsequent changes in the shape and density of the plasma plume in confined geometry are briefly described.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗