Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cyclotrons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Plasma production and ion heating systems for the Material Plasma Exposure eXperiment

Plasma production and ion heating in the Material Plasma Exposure eXperiment (MPEX), whose design is nearing completion, is accomplished using continuous wave RF power with average power density up to 1.6 MW/m2 at the plasma interface. Plasma is produced using helicon waves coupled through a single helical antenna at 13.56 MHz with power supplied by three 100 kW fixed-frequency RF generators feeding a power combiner network followed by the matching network and launcher. The helicon source can utilize various gasses including hydrogen, deuterium, and helium, with a magnetic field strength in the source region up to 0.2 T, and maximum device |B| of 2.5 T. Power is coupled to ions via ion cyclotron heating at the fundamental resonance using a pair of phased helical antennas operating in the frequency range 4-9 MHz, that launch waves towards the resonance from the antenna region where ω > ωci. ICH power is supplied by a single 500 kW tunable RF transmitter through a 90° power splitter and matching/decoupling network. In the case of both the helicon and ICH systems the antennas are located external to the vacuum, with power transferred through novel water-cooled coaxial vacuum windows consisting of fused quartz outer cylinders and silicon nitride inner cylinders with forced convection water cooling between them. The antenna enclosures are pressurized with dry air to 3 bar absolute for voltage standoff.Several 3-D COMSOL models have been created to simulate the two systems. A model of the helicon region utilizing a cold plasma dielectric tensor with accurate magnetic field and realistic plasma density profiles has been used to calculate the plasma loading/complex antenna input impedance at the launcher feed for various ne and |B| values, for the purpose of estimating power handling. It also incorporates the geometry of all launcher structures relevant to this determination. A still more detailed model of the launcher together with a lossy dielectric plasma surrogate has been used to determine RF electric field values and power losses in the device components.Similar models have been produced to predict the performance and power handling of the ICH launcher. For this device the impedance matrix of the two-element antenna array is calculated using a warm plasma model, necessary to properly determine the wave propagation and absorption.

Goulding, Richard↗
DOE OSTI2024

Simultaneous reproduction of experimental profiles, fluxes, transport coefficients, and turbulence characteristics via nonlinear gyrokinetic profile predictions in a DIII-D ITER similar shape plasma

Experimental conditions obtained on the DIII-D tokamak in the ITER Similar Shape (ISS) have been compared extensively with nonlinear gyrokinetic simulation using the CGYRO code [Candy et al., J. Comput. Phys. 324, 73–93 (2016)] with comparisons spanning ion and electron heat fluxes, electron and impurity particle transport, and turbulent fluctuation levels and characteristics. Bayesian optimization techniques [Rodriguez-Fernandez et al., Nucl. Fusion 62(7), 076036 (2022)], combined with nonlinear gyrokinetics, have been used to obtain simultaneously Qi, Qe, and Γe flux-matched profiles that are found to be in good agreement with experimental profile measurements. Synthetic diagnostics were used to compare measured beam emission spectroscopy and correlation electron cyclotron emission turbulent fluctuations with nonlinear simulation. Although some disagreements exist, nonlinear simulations are found to be in generally good agreement with measured fluctuation levels, spectral shapes, and measured radial trends in low-k δne/ne and δTe/Te. Low (Li and C) and mid-Z (Ca) impurity transport was also compared with these flux-matched simulations. Fully stripped, low-Z impurities are well reproduced by the gyrokinetic modeling while clear disagreement exists in comparisons with mid-Z impurities. Nonlinear gyrokinetic investigation into the Z dependence of impurity transport in the ISS conditions is also performed, demonstrating clear trends of impurity diffusion with impurity Z (both D∝Z and D∝1/Z) that vary with the radial location studied. These trends are shown to result from the local dominance of ion temperature gradient or ∇n driven trapped electron mode turbulence and may contribute to the disagreement between simulation and experiment in mid-Z impurity transport. The results of this work represent one of the most complete validation studies of the gyrokinetic model performed to date and provide an example of new capabilities for predicting performance in future fusion devices.

Physics↗
DOE OSTI2024

Kinetic closures for unmagnetized and magnetized plasmas

Parallel and perpendicular closures with cyclotron resonance effects retained for the five-moment (density, temperature, and flow velocity) fluid equations are derived by solving the kinetic equation with the Bhatnagar–Gross–Krook operator in Fourier space. For parallel propagation, the parallel closures are reduced to those of Ji et al. [Phys. Plasmas 20, 082121 (2013)]. The closures when combined to the fluid equations reproduce the fully kinetic dispersion relation that can be directly derived from the kinetic equation. The closures for the five-moment fluid system can be utilized to derive closures for the extended fluid system, which is demonstrated by deriving closures for the ten-moment system consisting of density, flow velocity, temperature, and viscosity tensor equations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Optical-pump–terahertz-probe spectroscopy in high magnetic fields with kHz single-shot detection

We demonstrate optical pump–THz probe (OPTP) spectroscopy with a variable external magnetic field (0–9 T), in which the time-dependent THz signal is measured by echelon-based single-shot detection at a repetition rate of 1 kHz. The method reduces data acquisition times by more than an order of magnitude compared to conventional electro-optic sampling using a scanning delay stage. The approach illustrates the wide applicability of the single-shot measurement approach to non-equilibrium systems that are studied through OPTP spectroscopy, especially in cases where parameters such as magnetic field strength (B) or other experimental parameters are varied. We demonstrate the capabilities of our measurement by performing cyclotron resonance experiments in bulk silicon, where we observe B-field-dependent carrier relaxation and distinct relaxation rates for different carrier types. We use a pair of economical linear array detectors to measure 500 time points on each shot, offering an equivalent performance to camera-based detection with possibilities for higher repetition rates.

Instruments & Instrumentation↗
DOE OSTI2024

Density drop at the divertor target in the prototype material plasma exposure eXperiment (Proto-MPEX)

The steady-state linear device “Material Plasma Exposure eXperiment” (MPEX) is currently under construction at Oak Ridge National Laboratory with the goal of enabling Plasma-Material Interaction studies at future fusion reactor relevant plasma conditions. In this work, a newly in-house developed hybrid Particle-In-Cell code-PICOS++ is applied to understand the experimental results obtained from the prototype of MPEX referred to as the “Proto-MPEX” during its helicon-only and helicon with ion cyclotron resonance heating (ICRH) experiments. This study explains the physics of the experimentally observed plasma density-drop at the divertor target in Proto-MPEX device during ICRH. In contrast to previous work on ICRH in MPEX, this study demonstrates that the mirror force plays a central role in the Proto-MPEX plasma transport during ICRH, which has new features not previously explored. Force balance analyses reveal that the temperature anisotropy produced by ICRH leads to a significant increase in the mirror force downstream of the resonance where the magnetic field is diverging. This force accelerates ions toward the target and leads to a drop in plasma density to ensure conservation of particle flux. Simulations with ICRH where the magnetic field divergence downstream of the resonance has been removed, do not produce plasma acceleration nor density drop at the target despite efficient ion heating at the resonance. Moreover, simulation results demonstrate that for a given ICRH power, lowering the source rate produces ions with increased perpendicular energy which interact with the mirror force to produce higher plasma acceleration which increases the strength of the density-drop at the target. The strength of the density drop appears to reach an asymptotic limit at a certain threshold ICRH power. Simulations show that this threshold power increases with increasing particle source rate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Design of radial interferometer–polarimeter for internal magnetic and density fluctuation measurements at multiple space–time scales in the National Spherical Torus Experiment-Upgrade (NSTX-U)

A Faraday-effect radial interferometer–polarimeter is designed for the National Spherical Torus Experiment-Upgrade (NSTX-U) to measure multiscale magnetic and density fluctuations critical to understanding fusion plasma confinement and stability, including those originating from magnetohydrodynamic instabilities, energetic particle-driven modes, and turbulence. The diagnostic will utilize the three-wave technique with 5 MHz bandwidth to simultaneously measure line-integrated magnetic and density fluctuations up to the ion-cyclotron frequency. Probe beams will be launched radially from the low-field side at the NSTX-U midplane, where the measured Faraday fluctuations mainly correspond to radial magnetic fluctuations that directly link to magnetic transport. A correlation technique will be employed to reduce the measurement noise to below 0.01° enabling detection of small amplitude fluctuations. Two toroidally displaced chords with 7° separation will be installed to measure toroidal mode numbers up to n = 25 for mode identification. Finally, solid-state microwave sources operating at 321 μm (935 GHz) will be used to minimize the impact of the Cotton–Mouton effect.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Frontier system-on-chip (SoC) technology for microwave diagnostics (invited)

The next generation of fusion reactors, exemplified by projects such as the Demonstration Power Plant following the International Thermonuclear Experimental Reactor, faces the monumental challenge of proving the viability of generating electricity through thermonuclear fusion. This pursuit introduces heightened complexities in diagnostic methodologies, particularly in microwave-based diagnostics. The increased neutron fluence necessitates significant reductions in vessel penetrations and the elimination of internal diagnostics, posing substantial challenges. SoC technology offers a promising solution by enabling the miniaturization, modularization, integration, and enhancing the reliability of microwave systems. After seven years of research, our team successfully pioneered the V- and W-band system-on-chip approach, leading to the development of active transmitters and passive receiver modules applied in practical settings, notably within the DIII-D tokamak project. Arrays of these modules have supported microwave imaging diagnostics. New physics measurement results from the Electron Cyclotron Emission Imaging system on DIII-D provide compelling evidence of improved diagnostics following the adoption of SoC technology. Furthermore, we achieved a breakthrough in developing an F-band SoC, advancing higher frequency capabilities for fusion devices. These achievements represent a significant leap forward in fusion diagnostic technology, marking substantial progress toward establishing reliable and efficient plasma diagnostics for future fusion reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Nonlinear simulations of GAEs in NSTX-U

A set of nonlinear simulations has been performed in order to study the nonlinear evolution of unstable global Alfvén eigenmodes in the National Spherical Torus Experiment-Upgrade (NSTX-U). Results of the single toroidal mode number, n, simulations are compared with a full nonlinear simulation (all toroidal harmonics included). In single-n simulations, the conservation of two integrals of motion of a particle in a cyclotron resonance with a monochromatic wave is demonstrated, resulting in a one-dimensional evolution of the particle distribution in (E,μ,pϕ) phase-space. Nonlinear simulations (both single-n and full nonlinear) show a significant redistribution of the resonant fast ions, especially in the pitch parameter. Thus, the changes in the resonant particle's parallel and perpendicular energies can be several times larger than the total particle energy change, with only a small fraction transferring into the excitation of the mode itself. This implies that even a relatively small amplitude mode can significantly modify the beam distribution in the resonant region. For the NSTX-U case considered, the single-n simulation results are close to full nonlinear simulation only for the most unstable mode, in which case the saturation amplitudes and changes in the fast ion distribution are comparable. In contrast, peak amplitudes of subdominant modes in all-n simulations are smaller by a factor of 3–10 compared to single-n runs due to the flattening of the beam ion distribution by the fastest growing mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Limiting current in a collisional crossed-field gap

Crossed-field devices are often used in pulsed power and high-power microwave applications. Previous studies derived closed-form solutions for the limiting current of a vacuum crossed-field system, corresponding to the maximum permissible current for laminar flow, below and above the Hull cutoff B H for magnetic insulation. We extend these studies by introducing collision frequency into the electron force law as a friction term to derive the limiting current in a collisional crossed-field gap. The resulting solution recovers the vacuum crossed-field case in the limit of no collisions and the collisional space-charge limited current with general initial velocity for magnetic field B → 0. In the limit of infinite collisions, we obtain a crossed-field equivalent to the Mott–Gurney law for the maximum current permissible in a collisional, nonmagnetic diode. When the collision frequency ν is less than the electron cyclotron frequency Ω, increasing initial velocity makes the critical current nonmonotonic with increasing ν with the critical current higher at B = B H for ν = Ω. As for a misaligned crossed-field gap where a component of the magnetic field was introduced parallel to the electric field across the gap, magnetic insulation is eliminated and the discontinuity at B = B H for limiting current observed in a vacuum crossed-field gap vanishes. As B → ∞, the limiting current approaches a constant that depends on the initial velocity and the collision frequency.

Breen, Lorin I.↗
DOE OSTI2025

Real-time steerable frequency-stepped Doppler backscattering (DBS) system for local helicon wave electric field measurements on the DIII-D tokamak

A new frequency-stepped Doppler backscattering (DBS) system has been integrated into a real-time steerable electron cyclotron heating launcher system to simultaneously probe local background turbulence (f < 10 MHz) and high-frequency (20–550 MHz) density fluctuations in the DIII-D tokamak. The launcher allows for 2D steering (horizontally and vertically) over wide angular ranges to optimize probe location and wavenumber response. The vertical steering can be optimized during a discharge in real time. The new DBS system employs a programmable frequency synthesizer with adjustable dwell time as a source to launch either O or X-mode polarized millimeter waves. This system can step in real-time over the entire E-band frequency range (60–90 GHz). This combination of capabilities allows for the diagnosis of the complex internal spatial structure of high power (>200 kW) helicon waves (476 MHz) injected from an external antenna during helicon current drive experiments in DIII-D. Broadband density fluctuations around the helicon frequency are observed during real-time scans of measurement location and wavenumber during these experiments. Analysis indicates that these broadband high-frequency fluctuations are a result of backscattering of the DBS millimeter-wave probe beam from plasma turbulence modulated by the helicon wave. It is observed that background turbulence is effectively locally “tagged” with the helicon wave electric field, forming images of the turbulent spectrum in the overall density fluctuation spectrum that appear as high-frequency sidebands of the turbulence. These observations of background turbulence and high-frequency fluctuations open up the possibility of monitoring local helicon wave amplitude by comparing the high-frequency signal amplitude to the simultaneously measured background turbulence. In combination with the real-time measurement location and wavenumber scanning capabilities (offered by real-time frequency-stepping and steering), this allows rapid determination of the spatial distribution of the helicon wave power during steady-state plasma operation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

The slow wave resonance cone in the collisional regime

In the low-density edge plasma of tokamaks, ion cyclotron range of frequencies actuators may parasitically emit slow waves. If the density is sufficiently low, which may be common in large future devices such as international thermonuclear experimental reactor (ITER), these slow waves take the form of so-called resonance cones. The traditional theoretical description of this wave mode relies on formally relating an electrostatic approximation of the frequency-domain wave equation to a time-domain wave equation and relating the cone angle to the wave speed in the time-domain wave equation. In the cold plasma collisional regime, that wave speed is complex. We investigate that scenario in this work.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Integrated modeling of advanced tokamaks for tearing mode avoidance on DIII-D

Understanding the physics of the onset and evolution of tearing modes (TMs) in tokamak plasmas is crucial for high-performance steady-state operations. The onset condition of (m,n) = (2,1) tearing stability, $Δ′$ > $Δ_c^′$> 0, has been studied in DIII-D steady-state hybrid discharges with accurate equilibrium reconstruction and well-measured plasma profiles. Here, m is the poloidal mode number and n is the toroidal mode number. The onset of n = 1 TMs is carefully identified using the Mirnov array to determine in-phase signals for the onset time and using electron cyclotron emission measurements to trace back from the saturated island width in the experiments for both initial island width and its growth rate. The tearing stability index $Δ′$ at TM onset is calculated in multiple ways, using the modified Rutherford equation and using the PEST-III or resistive DCON magnetohydrodynamic codes, and the results are in reasonable agreement with each other. The calculated $Δ′$ is compared with an analytical formula of the tearing stability threshold $Δ_c^′$ to determine the condition for the mode onset, $Δ′$ > $Δ_c^′$. Finally, the local gradient effect of the plasma current and the pressure profiles on the tearing stability is investigated in terms of the difference between $Δ′$ and $Δ_c^′$ through a series of modeled equilibria with the parametric variations. A database of experimental mode instability onsets is compatible with the simulated regions of instability obtained from the parametric variations.

Linear stability analysis↗
DOE OSTI2025

Finite ion temperature effects on electrostatic instabilities in partially magnetized plasmas

In this paper, the effects of warm ions on electrostatic, kinetic instabilities observed in partially magnetized plasmas, such as the electron cyclotron drift instability (ECDI) and modified two-stream instability (MTSI), are investigated. The kinetic dispersion relation that accounts for warm, non-magnetized ions and warm, magnetized electrons is solved using a complex root-finding technique [A. C. Denig and K. Hara, Phys. Plasmas 30, 032108 (2023)]. It is observed that finite ion temperature introduces ion Landau damping effects, decreasing the growth rate of most unstable modes. The high-frequency, short-wavelength ECDI modes are more strongly affected by ion Landau damping than the low-frequency, long-wavelength MTSI modes. The solutions of the kinetic dispersion relation for MTSI are compared with the fluid dispersion relation of MTSI, which was originally proposed by McBride et al. [Phys. Fluids 15 2367–2383 (1972)]. The differences in the dispersion characteristics between the kinetic and fluid MTSI limits are assessed, illustrating the effects of electron and ion Landau damping on kinetic instabilities in partially magnetized plasmas.

Denig, A. C. (ORCID:0000000253339572)↗
DOE OSTI2025

Machine learning enhanced predictions of ICRF heating: Overcoming numerical limitations via data curation

In this work, we present the development of robust surrogate models for Ion Cyclotron Range of Frequencies (ICRF) and High-Harmonic Fast Wave (HHFW) heating predictions in fusion plasmas. Building upon our previous efforts to achieve real-time capable models, we identify the cause of the outliers found using TORIC in certain HHFW heating scenarios. The outliers are observed to be spurious ion Bernstein wave (IBW)-like modes caused by a wavelength control algorithm designed to address challenging scenarios with high perpendicular wavenumbers. The effect arises from the modulation in the perpendicular susceptibility, which can induce sign reversal and IBW-like propagation for scenarios featuring normalized ion Larmor radius λ i ≫ 1. We use TORIC with this algorithm disabled to generate a novel HHFW-NSTX database that is free of outliers. Surrogate models trained on this database, including Random Forest Regressor (RFR), Multi-Layer Perceptrons, and Gaussian Process Regressors (GPR), demonstrate the ability to accurately predict HHFW heating profiles, with regression scores of R 2 ∈[0.93−0.99]. Additionally we demonstrate that it is possible to generalize predictions beyond training data by the use of both RFR and GPR models, enabling the prediction of scenarios previously limited to the original model. GPR models also provide uncertainty quantification, offering insights into model confidence. This work introduces a comprehensive Verification, Validation, and Uncertainty Quantification methodology for surrogate modeling, applicable not only to ICRF heating but also to other RF heating challenges and fusion physics problems. Beyond accelerated inference, these models show effective extrapolation capabilities, providing an alternative for addressing numerical challenges.

Artificial neural networks↗
DOE OSTI2025

Scattering theory in noncanonical phase space: A Drift-Kinetic collision operator for weakly collisional plasmas

After developing a scattering theory for grazing collisions in general noncanonical phase spaces, we introduce a guiding center collision operator in five-dimensional phase space designed for plasma regimes characterized by long wavelengths (relative to the Larmor radius), low frequencies (relative to the cyclotron frequency), and weak collisionality (where repeated Coulomb collisions induce cumulatively small changes in particle magnetic moment). The collision operator is fully determined by the noncanonical Hamiltonian structure of guiding center dynamics and exhibits a metriplectic structure, ensuring the conservation of particle number, momentum, energy, and interior Casimir invariants. It also satisfies an H-theorem, allowing for deviations from an equilibrium Maxwellian distribution due to the nontrivial kernel of the noncanonical guiding center Poisson tensor, spanned by the magnetic moment. We propose that this collision operator and its underlying mathematical structure may offer valuable insight into the study of turbulence, transport, and self-organizing phenomena in both laboratory and astrophysical plasmas.

Hamiltonian mechanics↗
DOE OSTI2026

Gyrotropy-induced symmetry breaking in RF-specific plasma wall interaction: Mechanisms and mitigation strategies

Ion cyclotron range of frequencies (ICRF) heating is essential for creating plasma in next-generation fusion devices. ICRF antennas often produce localized wall erosion, reducing reliability, material survivability, and overall plasma performance. We show that the wave physics' gyrotropy is among the causes of toroidal and poloidal asymmetries in these erosion spots, and that this source of asymmetry can be compensated for either by controlling the poloidal phasing or by modifying the limiter shapes.

Fusion reactors↗
DOE OSTI2026

Terahertz magneto-nanoscopy of encapsulated monolayer graphene

This study investigates the nanoscale conductivity of encapsulated monolayer graphene at temperatures down to 5 K and magnetic fields of up to 1 T. We use the scattering-type scanning near-field optical microscopy technique to probe magnetic-field-dependent responses from graphene close to charge neutrality in the terahertz spectral region. We observe the near-perfect high-q reflector behavior of graphene but with subtle changes by the presence of magnetic fields. Measurements align with calculations of the magneto-optical conductivity and the near-field spectroscopic contrast that describes the field-tunable cyclotron resonance of Dirac fermions. Our result provides an initial step toward understanding temperature and magnetic field effects on nanoscale terahertz transport in two-dimensional quantum materials.

Kim, Richard H. J. [Ames Laboratory (AMES), Ames, ↗
DOE OSTI2026

Avoidance of disruptions on KSTAR due to vertical displacement events via novel real-time stability assessment

Disruption avoidance via the DECAF approach has been achieved on KSTAR using a novel real-time vertical stability assessment and a multiactuator feedback control strategy. The development of disruption avoidance strategies with reactor-relevant reliability is an urgent activity, enabling future fusion power plants. The stability metric employed is based on a new formulation of a vertical force gradient balance metric evaluated across the poloidal cross section of the plasma, with parameters tuned using historical data. Evaluation of this metric on a validation set of 400 recent KSTAR shots indicates >82% of Vertical displacement events can be avoided via feedback control. Essential to its calculation is the two-dimensional toroidal current density distribution in the plasma. Measurement of this profile faster than fully-converged equilibrium reconstructions can deliver is found to improve forecaster performance and is achieved with a surrogate model that takes as input magnetic diagnostic measurements and outputs the current profile on a basis comprising the top principal components of historical current profiles (from past equilibrium reconstructions). This method solves the non-uniqueness problem typically faced when reconstructing current profiles directly from diagnostics, while improving computational time and accuracy. On average, profiles produced by this model reach coefficients of determination of >0.99 with respect to those from equilibrium reconstructions. The avoidance actuators employed include poloidal field coils and an electron cyclotron current drive system. The multiactuator approach, as shown in this first demonstration, allows disruption avoidance while minimizing impact to operational performance. This ability, along with its flexibility and speed, makes this new approach an attractive option for avoiding these types of disruptions in reactors.

Tobin, Matthew [Columbia Univ., New York, NY (Unit↗