Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “continuous models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

The origin of the plateau and late rebrightening in the afterglow of GRB 120326A

GRB 120326A is an unusual gamma-ray burst (GRB) that has a long plateau and a very late rebrightening in both X-ray and optical bands. The similar behavior of the optical and X-ray light curves suggests that they may share a common origin. The long plateau starts at several hundred seconds and ends at tens of thousands of seconds, and the peak time of the late rebrightening is about 30,000 s. We analyze the energy injection model by means of numerical and analytical solutions, considering both the wind environment and the interstellar medium environment for GRB afterglows. We particularly study the influence of the injection starting time, ending time, stellar wind density (or density of the circumburst environment), and injection luminosity on the shape of the afterglow light curves, respectively. In the wind model, we find that the light curve is largely affected by the parameters and that there is a 'bump' in the late stage. In the wind environment, we found that the longer the energy is injected, the more obvious the rebrightening will be. We also find that the peak time of the bump is determined by the stellar wind density. We use the late continuous injection model to interpret the unusual afterglow of GRB 120326A. The model fits the observational data well; however, we find that the timescale of the injection must be higher than 10,000 s, which implies that the timescale of the central engine activity must also be more than 10,000 s. This information can give useful constraints on the central engines of GRBs—we consider a newborn millisecond pulsar with a strong magnetic field to be the central engine. On the other hand, our results suggest that the circumburst environment of GRB 120326A is very likely a stellar wind.

79 ASTRONOMY AND ASTROPHYSICS↗

Observations of the solar wind speed near the sun

Two-antenna scintillation (IPS) observations can provide accurate measurements of the velocity with which electron density fluctuations drift past the line of sight. We will present recent IPS measurements made with the EISCAT and VLBA arrays. It is common, particularly during declining activity. for the line of sight to pass through plasma with a wide range of speed. Therefore it is important to account for the line of sight integration. It is clear from ULYSSES measurements that the speed is bimodal in nature, i.e., either 'fast' or 'slow.' Thus it is not necessary to model a continuous velocity distribution - one need only locate the 'fast-slow' interface. In addition one must consider the possibility that the density fluctuations are moving with respect to the flow of particles. Alfven waves propagating through field-aligned density fluctuations can mimic a sound wave in this respect, so the apparent IPS velocity can be the flow speed plus the Alfven speed. In modeling the IPS it is important that the scattering be 'weak,' because the weak scattering model requires only 1 spatial parameter instead of 3. Furthermore the effect of multiple velocities in much more distinct in weak scattering. EISCAT can only operate near 933 MHz, which limits the observations to outside of 17R(solar mass). The VLBA is the only facility with the combination of high frequency operation and long baselines required to observe inside of 15R(solar mass). A simple bimodal model has been successfully used to interpret our IPS observations near the sun. Farther out interaction regions have built up significantly and a two speed model is no longer valid. An apparent deceleration in the fast polar wind is sometimes evident when compared to the ULYSSES observation. The density variance delta N(exp 2)e in the fast wind appears to decrease from equator to pole.

Grall, R. R.↗

Evolving HPC and Application Design Toward a Coupled Data Assimilation System at NASA Suitable for Emerging Exascale Platforms

The prediction capabilities of global models have continuously evolved from the traditional medium-range global weather prediction application to span scales in support of hourly prediction of convective scale storms to seasonal Earth system prediction. This evolution has increased the demands on the system infrastructure design and workflow to achieve the required performance on modern high-performance computing (HPC) platforms. The planned evolution of the Goddard Earth Observing System (GEOS) modeling and assimilation system will stress the capabilities of conventional HPC overwhelming the available compute cycles at the NASA Center for Climate Simulation (NCCS) at the NASA Goddard Space Flight Center in the coming 5-10 years. This has led to the re-design of key elements of the assimilation and modeling systems to achieve significant gains in performance on anticipated Exacale platforms. The transition of the assimilation system to the Joint Effort for Data assimilation Integration (JEDI) framework has positioned GEOS to exploit new efficient algorithms for data assimilation (DA) in a fully-coupled Earth system context. The suitability of the GEOS model to leverage a domain specific language (DSL) approach and artificial intelligence (AI) is being explored to accelerate computational performance and data exchange efficiency of the coupled Earth system model. The storage and processing of large data volumes produced by these advance systems is being redesigned with a data-centric cloud-based approach. We will highlight the recent efforts in these areas and emphasize the demand for further development and re-design to achieve the science objectives in support of NASA's Earth system modeling and assimilation missions.

Putman, Bill↗

Understanding the Role of Interfaces for Water Management in Platinum Group Metal-Free Electrodes in Polymer Electrolyte Fuel Cells

For this study, a systematic analysis, both experimental and model-assisted, has been performed over three main configurations of platinum group metal-free (PGM-free) electrodes in polymer electrolyte fuel cells (PEFCs): Catalyst-coated membrane CCM technology is being compared to the gas-diffusion electrode (GDE) method of electrode fabrication and juxtaposed to a hybrid/combined GDE-CCM method of membrane-electrode assembly (MEA) fabrication. The corresponding electrodes were evaluated for their electrochemical performance, modeled, and studied with in situ and operando X-ray computed tomography (X-ray CT). The study establishes that through-thickness inhomogeneities play the most important role in water withdrawal/water management and affect most significantly PGM-free PEFC performance. The catalyst integration technique results in formation of interfacial regions with increased porosity and surface roughness. These regions form critical interfaces de facto responsible for flooding type behavior of the PEFC as shown for a first time by operando X-ray CT. The computational model shows that the PEFC performance critically depends on liquid water formation and transport at cold and wet conditions.

25 ENERGY STORAGE↗

Model-averaged benchmark concentration estimates for continuous response data arising from epidemiological studies

Worker populations often provide data on adverse responses associated with exposure to potential hazards. The relationship between hazard exposure levels and adverse response can be modeled and then inverted to estimate the exposure associated with some specified response level. One concern is that this endpoint may be sensitive to the concentration metric and other variables included in the model. Further, it may be that the models yielding different risk endpoints are all providing relatively similar fits. We focus on evaluating the impact of exposure on a continuous response by constructing a model-averaged benchmark concentration from a weighted average of model-specific benchmark concentrations. A method for combining the estimates based on different models is applied to lung function in a cohort of miners exposed to coal dust. In this analysis, we see that a small number of the thousands of models considered survive a filtering criterion for use in averaging. Even after filtering, the models considered yield benchmark concentrations that differ by a factor of 2 to 9 depending on the concentration metric and covariates. The model-average BMC captures this uncertainty, and provides a useful strategy for addressing model uncertainty.

01 COAL, LIGNITE, AND PEAT↗

Neutron Multiplicity Counting Diagnosis of Uranium Assemblies Interrogated by Cf-252 [Poster]

Researchers concluded: First neutron multiplicity counting of tens of kilograms of 235 U with organic scintillators; leakage multiplication estimates to be improved by incorporating detector cross-talk; provides data comparison for “Multiplicity Theory Beyond the Point Model;" promotes continued use of organic scintillators for NCERC and elsewhere.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The effects of attention sharing in a dynamic dual task environment

There are numerous examples of cases where the human operator is confronted with several tasks occurring simultaneously and continuously in time. The current study is an investigation into the nature of attention sharing between two continuous tasks with independent input-output modes. Eleven subjects were tested using a zero order compensatory control task with three levels of difficulty (input bandwidth) for each subject. As a secondary task on half of the trials, the subjects were also required to verbally shadow a random auditory input. Results from an extensive time and frequency domain analysis of the data are presented and discussed. The evidence supports a single channel model for continuous dual-task control.

Cliff, R. C.↗

Programmable exploration of magnetic states in Lieb-kagome interpolated lattices

We investigate a hybrid modeling framework in which a quantum annealer is used to simulate magnetic interactions in molecular qubit lattices inspired by experimentally realizable systems. Using phthalocyanine assemblies as a structurally constrained prototype, we model a continuous deformation from a Lieb to a kagome lattice, revealing frustration-driven disorder and magnetic field-induced reordering in the spin structure. Here, the goal is to show how a quantum annealer can operate as a physically instantiated, programmable platform to emulate experimentally relevant lattice deformations and produce observables in a manner analogous to an experimental measurement, enabling the characterization of magnetic arrangements beyond the reach of current molecular architectures. This surrogate modeling approach offers a pathway to explore and iteratively design tunable magnetic states in synthetic materials. The synthetic design, structural characterization, and quantum simulation framework established here defines a modular and scalable paradigm for probing the limits of engineered matter across chemistry, condensed matter, and quantum information science.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

An accelerating cosmology without dark energy

The negative pressure accompanying gravitationally-induced particle creation can lead to a cold dark matter (CDM) dominated, accelerating Universe (Lima et al. 1996 [1]) without requiring the presence of dark energy or a cosmological constant. In a recent study, Lima et al. 2008 [2] (LSS) demonstrated that particle creation driven cosmological models are capable of accounting for the SNIa observations [3] of the recent transition from a decelerating to an accelerating Universe, without the need for Dark Energy. Here we consider a class of such models where the particle creation rate is assumed to be of the form Γ = βH+γH{sub 0}, where H is the Hubble parameter and H{sub 0} is its present value. The evolution of such models is tested at low redshift by the latest SNe Ia data provided by the Union compilation [4] and at high redshift using the value of z{sub eq}, the redshift of the epoch of matter — radiation equality, inferred from the WMAP constraints on the early Integrated Sachs-Wolfe (ISW) effect [5]. Since the contributions of baryons and radiation were ignored in the work of LSS, we include them in our study of this class of models. The parameters of these more realistic models with continuous creation of CDM are constrained at widely-separated epochs (z{sub eq} ≈ 3000 and z ≈ 0) in the evolution of the Universe. The comparison of the parameter values, (β, γ), determined at these different epochs reveals a tension between the values favored by the high redshift CMB constraint on z{sub eq} from the ISW and those which follow from the low redshift SNIa data, posing a potential challenge to this class of models. While for β = 0 this conflict is only at ∼< 2σ, it worsens as β increases from zero.

79 ASTRONOMY AND ASTROPHYSICS↗

How good are polarizable and flexible models for water: Insights from a many-body perspective

We present a systematic analysis of state-of-the-art polarizable and flexible water models from a many-body perspective, with a specific focus on their ability to represent the Born–Oppenheimer potential energy surface of water from the gas to the liquid phase. Using coupled cluster data in the completed basis set limit as a reference, we examine the accuracy of the polarizable models in reproducing individual many-body contributions to interaction energies and harmonic frequencies of water clusters and compare their performance with that of MB-pol, an explicit many-body model that has been shown to correctly predict the properties of water across the entire phase diagram. Based on these comparisons, we use MB-pol as a reference to analyze the ability of the polarizable models to reproduce the energy landscape of liquid water under ambient conditions. We find that, while correctly reproducing the energetics of minimum-energy structures, the polarizable models examined in this study suffer from inadequate representations of many-body effects for distorted configurations. To investigate the role played by geometry-dependent representations of 1-body charge distributions in reproducing coupled cluster data for both interaction and many-body energies, we introduce a simplified version of MB-pol that adopts fixed atomic charges and demonstrate that the new model retains the same accuracy as the original MB-pol model. Based on the analyses presented in this study, we believe that future developments of both polarizable and explicit many-body models should continue in parallel and would benefit from synergistic efforts aimed at integrating the best aspects of the two theoretical/computational frameworks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Helium production prediction in HTR fuel using Monte Carlo MCB system - 18713

The integrated burnup calculation code MCB deals with the complexity of burnup process, which occurs in HTR and requires application of an integrated calculation system with consideration of spatial effects of full heterogeneous reactor model with continuous energy representation of cross section and the thermo-hydraulic coupling. MCB automatically calculates helium production in all possible reaction or decay channels. The methodology of He calculation in HTR using MCB is described. It includes transmutation trajectories analysis in few batch reloading scenarios, which allows us for integrated analysis of helium production sources. The result of performed analysis is presented showing the sources of strong contribution to the helium production rate. Statistical fluctuation effects on Monte Carlo modeling of nuclear reactors as well as the uncertainty assessment are carried out, which includes the error propagation in the depletion calculations. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The origin and evolution of model organisms

The phylogeny and timescale of life are becoming better understood as the analysis of genomic data from model organisms continues to grow. As a result, discoveries are being made about the early history of life and the origin and development of complex multicellular life. This emerging comparative framework and the emphasis on historical patterns is helping to bridge barriers among organism-based research communities.

Review, Academic↗

Rare Kaon Decays at CERN SPS

Since their discovery the K-mesons continue to provide valuable information to the theory of the interactions between the elementary particles. In two years of data taking the NA48/2 experiment at CERN SPS recorded more than 4 billion K{sup +}-->pi{sup +}pi{sup -}pi{sup +}- decays devoted to the search of CP violation in the charged kaon system. The huge statistics allows also a precise study of rare kaon decays. The results from the investigation of K{sup +}-->pi{sup +}-e{sup +}e{sup -} decay will be shown with their interpretation within several theoretical models. The continuation of the kaon program at CERN is the NA62 experiment devoted to the measurement of Br(K{sup +}-->pi{sup +}-vnu-bar) decay with a precision of 10% in two years of data taking. The planned detector setup and the expected background and signal events will be presented. During 2007 a dedicated run devoted to NA62 prototype tests and study of K{sub e2} decays was taken. The preliminary results from the study of K{sub e2} decays and the ratio R{sub K} GAMMA(K{sup +}-->e{sup +}-nu)/GAMMA(K{sup +}-->mu{sup +}-mu) at the NA48/2 and NA62 experiments will be shown.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nighttime Aerosol Optical Depth Measurements Using a Ground-based Lunar Photometer

In recent years it was proposed to combine AERONET network photometer capabilities with a high precision lunar model used for satellite calibration to retrieve columnar nighttime AODs. The USGS lunar model can continuously provide pre-atmosphere high precision lunar irradiance determinations for multiple wavelengths at ground sensor locations. When combined with measured irradiances from a ground-based AERONET photometer, atmospheric column transmissions can determined yielding nighttime column aerosol AOD and Angstrom coefficients. Additional demonstrations have utilized this approach to further develop calibration methods and to obtain data in polar regions where extended periods of darkness occur. This new capability enables more complete studies of the diurnal behavior of aerosols, and feedback for models and satellite retrievals for the nighttime behavior of aerosols. It is anticipated that the nighttime capability of these sensors will be useful for comparisons with satellite lidars such as CALIOP and CATS in additional to ground-based lidars in MPLNET at night, when the signal-to-noise ratio is higher than daytime and more precise AOD comparisons can be made.

Berkoff, Tim↗

Continuous Evaluation of Fast Processes in Climate Models Using ARM Measurements

This five-year award supports the project “Continuous Evaluation of Fast Processes in Climate Models Using ARM Measurements (FASTER)”. The goal of this project is to produce accurate, consistent and comprehensive data sets for initializing both single column models (SCMs) and cloud resolving models (CRMs) using data assimilation. A multi-scale three-dimensional variational data assimilation scheme (MS-3DVAR) has been implemented. This MS-3DVAR system is built on top of WRF/GSI. The Community Gridpoint Statistical Interpolation (GSI) system is an operational data assimilation system at the National Centers for Environmental Prediction (NCEP) and has been implemented in the Weather Research and Forecast (WRF) model. This MS-3DVAR is further enhanced by the incorporation of a land surface 3DVAR scheme and a comprehensive aerosol 3DVAR scheme. The data assimilation implementation focuses in the ARM SGP region. ARM measurements are assimilated along with other available satellite and radar data. Reanalyses are then generated for a few selected period of time. This comprehensive data assimilation system has also been employed for other ARM-related applications.

54 ENVIRONMENTAL SCIENCES↗

CMS multicore scheduling strategy

In the next years, processor architectures based on much larger numbers of cores will be most likely the model to continue 'Moore's Law' style throughput gains. This not only results in many more jobs in parallel running the LHC Run 1 era monolithic applications, but also the memory requirements of these processes push the workernode architectures to the limit. One solution is parallelizing the application itself, through forking and memory sharing or through threaded frameworks. CMS is following all of these approaches and has a comprehensive strategy to schedule multicore jobs on the GRID based on the glideinWMS submission infrastructure. The main component of the scheduling strategy, a pilot-based model with dynamic partitioning of resources that allows the transition to multicore or whole-node scheduling without disallowing the use of single-core jobs, is described. This contribution also presents the experiences made with the proposed multicore scheduling schema and gives an outlook of further developments working towards the restart of the LHC in 2015.

Perez-Calero Yzquierdo, Antonio↗

Fractional modeling of viscoelasticity in 3D cerebral arteries and aneurysms

We develop efficient numerical methods for fractional order PDEs, and employ them to investigate viscoelastic constitutive laws for arterial wall mechanics. Recent simulations using one-dimensional models [1] have indicated that fractional order models may offer a more powerful alternative for modeling the arterial wall response, exhibiting reduced sensitivity to parametric uncertainties compared with the integer-calculus-based models. Here, we study three-dimensional (3D) fractional PDEs that naturally model the continuous relaxation properties of soft tissue, and for the first time employ them to simulate flow structure interactions for patient-specific brain aneurysms. To deal with the high memory requirements and in order to accelerate the numerical evaluation of hereditary integrals, we employ a fast convolution method [2] that reduces the memory cost to O(log(N)) and the computational complexity to O(N log(N)). Furthermore, we combine the fast convolution with high-order backward differentiation to achieve third-order time integration accuracy. We confirm that in 3D viscoelastic simulations, the integer order models strongly depends on the relaxation parameters, while the fractional order models are less sensitive. As an application to long-time simulations in complex geometries, we also apply the method to modeling fluid-structure interaction of a 3D patient-specific compliant cerebral artery with an aneurysm. Taken together, our findings demonstrate that fractional calculus can be employed effectively in modeling complex behavior of materials in realistic 3D time-dependent problems if properly designed efficient algorithms are employed to overcome the extra memory requirements and computational complexity associated with the non-local character of fractional derivatives.

Computer Science↗

The FLUKA Code: Developments and Challenges for High Energy and Medical Applications

The FLUKA Monte Carlo code is used extensively at CERN for all beam-machine interactions, radioprotection calculations and facility design of forthcoming projects. Such needs require the code to be consistently reliable over the entire energy range (from MeV to TeV) for all projectiles (full suite of elementary particles and heavy ions). Outside CERN, among various applications worldwide, FLUKA serves as a core tool for the HIT and CNAO hadron-therapy facilities in Europe. Therefore, medical applications further impose stringent requirements in terms of reliability and predictive power, which demands constant refinement of sophisticated nuclear models and continuous code improvement. Some of the latest developments implemented in FLUKA are presented in this paper, with particular emphasis on issues and concerns pertaining to CERN and medical applications.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗