Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “combustion kinetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1929

Impact waves and detonation. Part I

Among the numerous thermodynamic and kinetic problems that have arisen in the application of the gaseous explosive reaction as a source of power in the internal combustion engine, the problem of the mode or way by which the transformation proceeds and the rate at which the heat energy is delivered to the working fluid became very early in the engine's development a problem of prime importance. The work of Becker here given is a notable extension of earlier investigations, because it covers the entire range of the explosive reaction in gases - normal detonation and burning.

DETONATION↗
NASA NTRS1999

Thermodynamic Cycle Analysis of Magnetohydrodynamic-Bypass Airbreathing Hypersonic Engines

Established analyses of conventional ramjet/scramjet performance characteristics indicate that a considerable decrease in efficiency can be expected at off-design flight conditions. This can be explained, in large part, by the deterioration of intake mass flow and limited inlet compression at low flight speeds and by the onset of thrust degradation effects associated with increased burner entry temperature at high flight speeds. In combination, these effects tend to impose lower and upper Mach number limits for practical flight. It has been noted, however, that Magnetohydrodynamic (MHD) energy management techniques represent a possible means for extending the flight Mach number envelope of conventional engines. By transferring enthalpy between different stages of the engine cycle, it appears that the onset of thrust degradation may be delayed to higher flight speeds. Obviously, the introduction of additional process inefficiencies is inevitable with this approach, but it is believed that these losses are more than compensated through optimization of the combustion process. The fundamental idea is to use MHD energy conversion processes to extract and bypass a portion of the intake kinetic energy around the burner. We refer to this general class of propulsion system as an MHD-bypass engine. In this paper, we quantitatively assess the performance potential and scientific feasibility of MHD-bypass airbreathing hypersonic engines using ideal gasdynamics and fundamental thermodynamic principles.

Litchford, Ron J.↗
DOE OSTI2024

Optimization and purification of magnesium borides fabricated by combustion synthesis and by high-temperature sintering

Hydrogen as a fuel provides several benefits over the use of fossil fuels; however, one challenge in utilizing hydrogen as an energy carrier revolves around its storage. Achieving sufficient volumetric hydrogen density in a storage solution will facilitate hydrogen’s adoption for use in both stationary and mobile applications. Solid-state hydrogen storage provides a promising pathway to solving this problem. However, the hydrogenation of these materials is characterized by slow kinetics and extreme thermodynamic conditions. Magnesium borohydride (Mg(BH4)2) is a promising material in hydrogen storage due to its reversible properties and a theoretical hydrogen capacity of 14.9 wt.%. To synthesize this material, combustion synthesis of magnesium borides (MgBx) has been implemented with the aim to further lower thermodynamic requirements for direct hydrogenation. A drawback of this process is the potential formation of oxide contaminants, which decrease hydrogenation/dehydrogenation and recyclability performance. The present work focuses on identifying parameters useful for reducing contamination and evaluating potential pathways to the purification of magnesium borides with the goal of improving their quality.

Camarena, Miguel Joaquin↗
DOE OSTI2022

The Role of Methylaryl Radicals in the Growth of Polycyclic Aromatic Hydrocarbons: The Formation of Five-Membered Rings

The regions of the C 13 H 11 potential energy surface (PES) related to the unimolecular isomerization and decomposition of the 1-methylbiphenylyl radical and accessed by the 1-/2-methylnaphthyl + C 2 H 2 reactions have been explored by ab initio G3(MP2,CC)//B3LYP/6-311G(d,p) calculations. The kinetics of these reactions relevant to the growth of polycyclic aromatic hydrocarbons (PAH) under high-temperature conditions in circumstellar envelopes and in combustion flames has been studied employing the RRKM-Master Equation approach. The unimolecular reaction of 1-methylbiphenylyl proceeding via a five-membered ring closure followed by H elimination is predicted to be very fast, on a submicrosecond scale above 1000 K and to result in the formation of an embedded five-membered ring in the 9H-fluorene product. The 1-/2-methylnaphthyl + C 2 H 2 reaction mechanism involves acetylene addition to the radical on the methylene group followed by a six- or five-membered ring closure and aromatization via an H atom loss. Despite of the complexity of the C 13 H 11 PES, these straightforward pathways are dominant in the high-temperature regime (above ~1000 K), with the prevailing products being phenalene, with a significant contribution of 1H-cyclopenta(a)naphthalene, for 1-methylnaphthyl + C 2 H 2 , and 1H-cyclopenta(b)naphthalene and 3H-cyclopenta(a)naphthalene, for 2-methylnaphthyl + C 2 H 2 . The methylnaphthyl reactions with acetylene represent a clean source of the three-ring PAHs, but they are relatively slow owing to the high entrance barriers of ~10 kcal/mol, with the rate constants of about an order of magnitude lower as compared to those for naphthyl + allene and σ-aryl + C 2 H 2 . Here, the 1-methylnaphthyl + C 2 H 2 and 2-methylnaphthyl + C 2 H 2 reactions represent prototypes for PAH growth by an extra six- and five-membered ring on a zigzag edge or a corner of PAH and the generated modified Arrhenius expressions are recommended for kinetic modeling of PAH expansion by the mechanism of acetylene addition to methylaryl radicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

The Sensitivity of Chemical Kinetic Models on Flame Transfer Functions in Acoustic Fluctuation Environments with Varying Equivalence Ratios

Various factors affect the heat release response of flames – thermodynamics, hydrodynamics, acoustics, etc. The coupling of heat release rate and acoustics, in particular, is essential to the design of combustion devices so as to avoid adverse effects during their operation. Modeling flames in acoustic environments requires an accurate understanding of the fundamental physics that occurs when flames interact with a fluctuating pressure field. Over the past couple of decades, researchers have been quantifying the impact of this fluctuating pressure field on the unsteady heat release rate. The flame transfer functions computed have also been shown to depend on the level of detail in the chemical kinetic model. This paper attempts to bridge the gap between these studies to understand how sensitive the flame transfer function is to various kinetic models. The problem is studied by performing multiple one-dimensional simulations using the low-Mach solver NGA. The detailed GRI-Mech 3.0 will be used for comparison. Also, the pressure amplitude and reactant equivalence ratio are varied to understand how the environment affects this sensitivity.

Girdhar, Anant↗
NASA NTRS1993

Three-dimensional modeling of diesel engine intake flow, combustion and emissions-2

A three-dimensional computer code, KIVA, is being modified to include state-of-the-art submodels for diesel engine flow and combustion. Improved and/or new submodels which have already been implemented and previously reported are: wall heat transfer with unsteadiness and compressibility, laminar-turbulent characteristic time combustion with unburned HC and Zeldo'vich NO(x), and spray/wall impingement with rebounding and sliding drops. Progress on the implementation of improved spray drop drag and drop breakup models, the formulation and testing of a multistep kinetics ignition model, and preliminary soot modeling results are described. In addition, the use of a block structured version of KIVA to model the intake flow process is described. A grid generation scheme was developed for modeling realistic (complex) engine geometries, and computations were made of intake flow in the ports and combustion chamber of a two-intake-value engine. The research also involves the use of the code to assess the effects of subprocesses on diesel engine performance. The accuracy of the predictions is being tested by comparisons with engine experiments. To date, comparisons were made with measured engine cylinder pressure, temperature and heat flux data, and the model results are in good agreement with the experiments. Work is in progress that will allow validation of in-cylinder flow and soot formation predictions. An engine test facility is described that is being used to provide the needed validation data. Test results were obtained showing the effect of injection rate and split injections on engine performance and emissions.

Reitz, R. D.↗
NASA NTRS1995

Flow diagnostics, chemically reacting turbulent flow modeling and turbulent mixing: A summary of project studies in combustion

This report includes copies of relevant publications, including conference proceedings, resulting from studies funded by NAG3-1010. Topics include flow visualization, LDV (laser doppler velocimeter), straight and curved simulations, and kinetics modeling of nitrogen oxides, including a turbulent mixing model for O2 and a maximum mixedness model.

Ghorashi, Bahman↗
DOE OSTI2022

Replicating HCCI-like autoignition behavior: What gasoline surrogate fidelity is needed?

This work seeks to characterize the fidelity needed in a gasoline surrogate with the intent to replicate the complex autoignition behavior exhibited within advanced combustion engines, and specifically Homogeneous Charge Compression Ignition (HCCI). A low-temperature gasoline combustion (LGTC) engine operating in HCCI mode and a rapid compression machine (RCM) are utilized to experimentally quantify fuel reactivity, through autoignition and preliminary heat release characteristics. Fuels considered include a research grade E10 U.S. gasoline (RD5-87), three multi-component surrogates (PACE-1, PACE-8, PACE-20), and a binary surrogate (PRF88.4). Each fuel was studied at lean/HCCI-like conditions covering a wide range of temperatures and pressures that are representative of naturally aspirated to high boost engine operation. Detailed chemical kinetic modeling is also undertaken using a recently updated gasoline surrogate kinetic model to simulate the RCM experiments and to provide chemical insight into surrogate-to-surrogate differences. The LGTC engine experiments demonstrate nearly identical reactivity between PACE-20 and RD5-87 across studied conditions, while faster phasing is seen for both PACE-1 and PACE-8 due to their stronger intermediate- and low-temperature heat release (ITHR/LTHR) at naturally aspirated and boosted conditions, respectively. The RCM experiments reveal typical low-temperature, negative temperature coefficient (NTC) and intermediate-temperature autoignition behaviors at all pressure conditions for RD5-87, which are qualitatively reproduced by all surrogates. Quantitative discrepancies in both autoignition and preliminary heat release are observed for all surrogates, while their ability to replicate RD5-87 autoignition behavior follows the order of PACE-20 > PACE-1 > PACE-8 > PRF88.4. Excellent mapping is obtained between the LGTC engine and the RCM, where the engine pressure-time trajectories can be characterized by the regimes represented by the RCM autoignition isopleths. The kinetic model performs commendably when simulating both autoignition and preliminary heat release of PACE-20, while typically overpredicting ignition delay times for PACE-1, PACE-8 and PRF88.4 at high-pressure and low-temperature/NTC conditions. Sensitivity and rate of production (ROP) analyses highlight surrogate-to-surrogate differences in the governing chemical kinetics where n-pentane initiates rapid OH branching at a faster rate and an earlier timing for PACE-20 than iso-pentane does for PACE-1 and PACE-8, making it computationally more reactive than the other surrogates. The current study highlights the need to include non-standardized properties, such as the lean/HCCI-like autoignition characteristics, in addition to ASTM properties (e.g., RON, MON) as metrics of fuel reactivity and targets to be matched when formulating high-fidelity surrogates that fully capture gasoline advanced combustion behavior such as HCCI-like autoignition.

42 ENGINEERING↗
DOE OSTI2024

Understanding the ignition process and flame structure of conventional and oxygenated fuels under engine relevant conditions – An optical study

Renewably generated synthetic fuels such as poly-oxymethylene ethers (OME) have a significant potential to effectively break the soot-NOX trade-off in compression ignition engines by using exhaust gas recirculation (EGR) to maintain low nitrogen oxide (NOX) emissions while maintaining good efficiency and simultaneously contributing to circular carbon economy. However, owing to the fundamental differences in properties of OME when compared to fossil-based diesel fuels, it is critical to fully understand its ignition and combustion phenomenology to take advantage of this fuel to its utmost potential. In this context, this work outlines the results of a systematic experimental study performed in a heavy-duty, single-cylinder, optical engine probing the spatial and temporal progression of fuel decomposition and ignition behavior of OME when compared to n-dodecane, a diesel-fuel surrogate. Thermodynamic analysis and optical diagnostics techniques including simultaneous HCHO-PLIF and OH-PLIF complemented by high-speed OH* chemiluminescence were employed along with parametric sweeps of intake temperature and EGR dilution rates. OME does not exhibit any observable low temperature heat release irrespective of the ambient oxygen concentration. Differences in the observed diffusive flame structure such as longer flame lift-off length, less pronounced combustion recession, faster premixed burn at ignition (“volumetric” ignition), non-sooting behavior suggest that the inherent presence of fuel-bound oxygen in OME can skew the air-fuel ratio (AFR) distribution within the jet thereby reducing the reliance of combustion on mixing and air entrainment. This leads to rapid late-cycle oxidation leading to shorter combustion duration and favorable combustion phasing. Results also suggest that OME exhibits relatively weak negative temperature coefficient (NTC) behavior, however, the OME fuel-decomposition kinetic-pathways produce significant concentration of HCHO, which might be erroneously interpreted as a product of cool-flames.

Air-fuel ratio↗
NASA NTRS1990

Control-oriented modeling of combustion and flow processes in liquid propellant rocket engines

This paper presents a control-oriented model of the flow, reaction, and transport processes in liquid propellant rocket combustion chambers, based on the multicomponent conservation laws of gas dynamics. This model provides a framework for the inclusion of detailed chemical kinetic relations, viscous and other dissipative effects, a variety of actuators and sensors, as well as process and measurement disturbances. In addition to its potential usefulness to the designer in understanding the dynamical complexity of the system and the sources of model uncertainty, the model provides a rigorous basis for control system design. An appraisal of current and feasible actuators and sensors, and their mathematical representation are included.

Bentsman, Joseph↗
NASA NTRS1991

Combustion of liquid fuel droplets in supercritical conditions

A comprehensive analysis of liquid-fuel droplet combustion in both sub- and super-critical environments has been conducted. The formulation is based on the complete conservation equations for both gas and liquid phases, and accommodates finite-rate chemical kinetics and a full treatment of liquid-vapor phase equilibrium at the droplet surface. The governing equations and the associated interface boundary conditions are solved numerically using a fully coupled, implicit scheme with the dual time-stepping integration technique. The model is capable of treating the entire droplet history, including the transition from the subcritical to the supercritical state. As a specific example, the combustion of n-pentane fuel droplets in air is studied for pressures of 5-140 atm. Results indicate that the ambient gas pressure exerts significant control of droplet gasification and burning processes through its influences on the fluid transport, gas/liquid interface thermodynamics, and chemical reactions. The droplet gasification rate increases progressively with pressure. However, the data for the overall burnout time exhibits a significant variation near the critical burning pressure, mainly as a result of reduced mass-diffusion rate and latent heat of vaporization with increased pressure. The influence of droplet size on the burning characteristics is also noted.

Shuen, J. S.↗
NASA NTRS1992

Diffusion mechanisms in chemical vapor-deposited iridium coated on chemical vapor-deposited rhenium

Radiation-cooled rocket thruster chambers have been developed which use CVD Re coated with CVD Ir on the interior surface that is exposed to hot combustion gases. The Ir serves as an oxidation barrier which protects the structural integrity-maintaining Re at elevated temperatures. The diffusion kinetics of CVD materials at elevated temperatures is presently studied with a view to the prediction and extension of these thrusters' performance limits. Line scans for Ir and Re were fit on the basis of a diffusion model, in order to extract relevant diffusion constants; the fastest diffusion process is grain-boundary diffusion, where Re diffuses down grain boundaries in the Ir overlayer.

Hamilton, J. C.↗
NASA NTRS1997

The Oxidation of CVD Silicon Carbide in Carbon Dioxide

Chemically-vapor-deposited silicon carbide (CVD SiC) was oxidized in carbon dioxide (CO2) at temperatures of 1200-1400 C for times between 100 and 500 hours at several gas flow rates. Oxidation weight gains were monitored by thermogravimetric analysis (TGA) and were found to be very small and independent of temperature. Possible rate limiting kinetic laws are discussed. Oxidation of SiC by CO2 is negligible compared to the rates measured for other oxidants typically found in combustion environments: oxygen and water vapor.

Opila, Elizabeth J.↗
NASA NTRS2002

Spray and High-Pressure Flow Computations in the National Combustion Code (NCC) Improved

Sprays occur in a wide variety of industrial and power applications and in materials processing. A liquid spray is a two-phase flow with a gas as the continuous phase and a liquid as the dispersed phase in the form of droplets or ligaments. The interactions between the two phases--which are coupled through exchanges of mass, momentum, and energy--can occur in different ways at disparate time and length scales involving various thermal, mass, and fluid dynamic factors. An understanding of the flow, combustion, and thermal properties of a rapidly vaporizing spray requires careful modeling of the ratecontrolling processes associated with turbulent transport, mixing, chemical kinetics, evaporation, and spreading rates of the spray, among many other factors. With the aim of developing an efficient solution procedure for use in multidimensional combustor modeling, researchers at the NASA Glenn Research Center have advanced the state-of-the-art in spray computations in several important ways.

Raju, Manthena S.↗
NASA NTRS1999

Large Diameter, Radiative Extinction Experiments with Decane Droplets in Microgravity

The extinction of a diffusion flame is of fundamental interest in combustion science. Linan, Law, and Chung and Law analytically and experimentally determined an extinction boundary in terms of droplet diameter and pressure for a single droplet due to Damkohler, or blowoff, extinction. More recently, other researchers demonstrated extinction due to finite rate kinetics in reduced gravity for free droplets of heptane. Chao modeled the effect of radiative heat loss on a quasi-steady spherically symmetric single droplet burning in the absence of buoyancy. They determined that for increasing droplet diameter, a second limit can be reached such that combustion is no longer possible. This second, larger droplet diameter limit arises due to radiative heat loss, which increases with increasing droplet and flame diameter. This increase in radiative heat loss arises due to an increase in the surface area of the flame. Recently, Marchese modeled fuel droplets with detailed chemistry and radiative effects, and compared the results to other work. The modeling also showed the importance of radiative loss and radiative extinction Experiments examined the behavior of a large droplet of decane burning in reduced gravity onboard the NASA Lewis DC-9 aircraft, but did not show a radiative extinction boundary due to g-jitter (Variations in gravitational level and direction) effects. Dietrich conducted experiments in the reduced gravity environment of the Space Shuttle. This work showed that the extinction diameter of methanol droplets increased when the initial diameter of the droplets was large (in this case, approximately 5 mm). Theoretical results agreed with these experimental results only when the theory included radiative effects . Radiative extinction was experimentally verified by Nayagam in a later Shuttle mission. The following work focuses on the combustion and extinction of a single fuel droplet. The goal is to experimentally determine a large droplet diameter limit that arises due to radiative heat loss from the flame to the surroundings.

Easton, John↗
NASA NTRS1992

Combustion of liquid-fuel droplets in supercritical conditions

A comprehensive analysis of liquid-fuel droplet combustion in both subcritical and supercritical environments has been conducted. The formulation is based on the complete conservation equations for both gas and liquid phases, and accommodates variable thermophysical properties, finite-rate chemical kinetics, and a full treatment of liquid-vapor phase equilibrium at the drop surface. The governing equations and associated interfacial boundary conditions are solved numerically using a fully coupled, implicit scheme with the dual time-stepping integration technique. The model is capable of treating the entire droplet history, including the transition from the subcritical to supercritical state. As a specific example, the combustion of n-pentane fuel droplets in air is studied for pressures in the range of 5-140 atm. Results indicate that the ambient gas pressure exerts significant control of droplet gasification and burning processes through its influence on fluid transport, gas-liquid interfacial thermodynamics, and chemical reactions. The droplet gasification rate increases progressively with pressure. However, the data for the overall burnout time exhibit a considerable change in the combustion mechanism at the critical pressure, mainly as a result of reduced mass diffusivity and latent heat of vaporization with increased pressure.

Shuen, J. S.↗
NASA NTRS1998

LSPRAY: Lagrangian Spray Solver for Applications With Parallel Computing and Unstructured Gas-Phase Flow Solvers

Sprays occur in a wide variety of industrial and power applications and in the processing of materials. A liquid spray is a phase flow with a gas as the continuous phase and a liquid as the dispersed phase (in the form of droplets or ligaments). Interactions between the two phases, which are coupled through exchanges of mass, momentum, and energy, can occur in different ways at different times and locations involving various thermal, mass, and fluid dynamic factors. An understanding of the flow, combustion, and thermal properties of a rapidly vaporizing spray requires careful modeling of the rate-controlling processes associated with the spray's turbulent transport, mixing, chemical kinetics, evaporation, and spreading rates, as well as other phenomena. In an attempt to advance the state-of-the-art in multidimensional numerical methods, we at the NASA Lewis Research Center extended our previous work on sprays to unstructured grids and parallel computing. LSPRAY, which was developed by M.S. Raju of Nyma, Inc., is designed to be massively parallel and could easily be coupled with any existing gas-phase flow and/or Monte Carlo probability density function (PDF) solver. The LSPRAY solver accommodates the use of an unstructured mesh with mixed triangular, quadrilateral, and/or tetrahedral elements in the gas-phase solvers. It is used specifically for fuel sprays within gas turbine combustors, but it has many other uses. The spray model used in LSPRAY provided favorable results when applied to stratified-charge rotary combustion (Wankel) engines and several other confined and unconfined spray flames. The source code will be available with the National Combustion Code (NCC) as a complete package.

Raju, Manthena S.↗
DOE OSTI2026

Flow Reactor Study and Kinetic Model Development of HEFA-SPK and its Surrogate

In this work, we formulate a two-component surrogate for HEFA-SPK, incorporating aromatic or cycloalkane components, and develop reduced kinetic models for the surrogates to be used in high-performance computing simulations. The HEFA-SPK surrogate was selected and optimized based on the fuel's physical and combustion properties, including ignition delay times and flame speeds. The resulting surrogate consists of 40% n-undecane and 60% 2-methylnonane. The surrogate was confirmed by flow reactor experiments for both the HEFA-SPK fuel and the suggested two-component surrogates, where excellent agreement was observed. To meet aromatic requirements, 1,2,4-trimethylbenzene (8%) was selected, and we determined that incorporating 30% propylcyclohexane into the HEFA-SPK will achieve a volume swell equivalent to 8% aromatics. The properties of the surrogates were measured, and a new reduced kinetic model was developed based on the semi-decoupling methodology, using a reduced CH4 chemistry from NUIG 1.0 as base chemistry. Kinetic models will be employed in combustor simulations to enable a comprehensive understanding of the effect of SAF fuel properties on aviation combustor performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗