Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “combined indicator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Radar, an optimum remote-sensing tool for detailed plate tectonic analysis and its application to hydrocarbon exploration (an example in Irian Jaya Indonesia)

Geometric, geomorphic, and structural information derived from the examination of radar imagery and combined with geologic and geophysical evidences strongly indicates that Salawati Island was attached to the Irian Jaya mainland during the time of Miocene lower Pliocene reef development, and that it was separated in middle Pliocene to Pleistocene time, opening the Sele Strait rift zone. The island moved 17.5 km southwestward after an initial counterclockwise rotation of 13 deg. The rift zone is subsequent to the creation of the large left lateral Sorong fault zone that is part of the transitional area separating the westward-moving Pacific plate from the relatively stable Australian plate. The motion was triggered during a widespread magmatic intrusion of the Sorong fault zone, when the basalt infiltrated a right lateral fault system in the area of the present Sele Strait.

Froidevaux, C. M.↗
NASA NTRS1980

Fluid dynamics of the unsteady two phase processes leading to DDT in granular solid propellants

Deflagration to Detonation (DDT) was predicted to occur in porous beds of high-energy solid propellants by solving the unsteady fluid mechanical convective heat transfer from hot gas products, obtained from the rapid burning at high pressures, provides the impetus to develop a narrow combustion zone and a resulting strong shock. A parametric study clearly indicates that DDT occurs only when a combination of the solids loading fraction, the burning rate constants, the propellant chemical energy, and the particle size provide for critical energy and gas release to support a detonation wave. Predictions for the run-up length to detonation as a function of these parameters are presented.

Krier, H.↗
NASA NTRS1982

Ultraviolet observations of yellow giant stars

Low-dispersion spectra of 18 yellow giant stars of spectral types G4-KO were obtained with the short wavelength camera of IUE. Using the emission strength of the C IV 1550 A multiplet as a measure of high temperature 100,000K plasma, we find that the normalized C IV flux is typically 10 to the minus 7th power or smaller, indicating very feeble stellar transition regions. By combining these results with earlier data from IUE, it is shown that there is nearly a two orders of magnitude spread in carbon IV bolometric flux among the yellow giants. Several likely reasons for the observed range in high-temperature emission line strengths are discussed; the more likely appears to be that the majority of the yellow giant stars observed are slow rotators evolving across the Hertzsprung Gap for the second time along a blue loop.

Simon, T.↗
NASA NTRS1981

Solar-pumped electronic-to-vibrational energy transfer lasers

The possibility of using solar-pumped lasers as solar energy converters is examined. The absorbing media considered are halogens or halogen compounds, which are dissociated to yield excited atoms, which then hand over energy to a molecular lasing medium. Estimates of the temperature effects for a Br2-CO2-He system with He as the cooling gas are given. High temperatures can cause the lower energy levels of the CO2 laser transition to be filled. The inverted populations are calculated and lasing should be possible. However, the efficiency is less than 0.001. Examination of other halogen-molecular lasant combinations (where the rate coefficients are known) indicate efficiencies in all cases of less than 0.005.

Harries, W. L.↗
NASA NTRS1982

Experimental measurement of passive material and structural damping for flexible space structures

Among the design objectives for large space structures are the maintenance of tight dimensional tolerance and the reduction of settling time after disturbance input. Two options are under consideration for the design of flexible structures to meet these objectives, including an active control option and a passive control option. In connection with both options, it is necessary to include material and structural damping in the design. A description is presented of the results of an experimental investigation of the damping of metallic and fibrous composite materials, taking into account also the analytical modeling and experimental verification of frictional damping schemes. To demonstrate how material and frictional damping can be combined, a simple structural optimization is performed, indicating the potential for significant savings in mass by the addition of frictional dampers.

Crawley, E. F.↗
NASA NTRS1983

The problem of cooling the cold Io torus

Two models are developed for the transport of ions inward from Io's orbit, the first using the assumption that radial diffusion is the dominant transport mechanism while the second uses a combination of diffusive and convective transport. The models include thermal and number density transport, radiation, ionization and pickup of local neutrals, recombination, charge exchange, and Coulomb interactions. It is found that pure diffusive transport can account for the dramatic inward depletion of the torus only by invoking recombination or by postulating a massive increase in the production rate of torus ions sometime prior to the Voyager mission. Recombination is determined to be far too slow to be the cause of the observed density decrease inside of Io. The model combining convection and diffusion is shown to reasonably match the data, but only if a diffusion coefficient 100 times less than that derived from Pioneer observations is used. In addition, it is shown that the Pioneer derived diffusion rate combined with Voyager temperature and density measurements indicate a large nonradiative sink of energy in the inner torus.

Richardson, J. D.↗
NASA NTRS1984

Advanced Concepts Liquid Droplet Radiator

An exploratory point design study was carried out on a shuttle-launchable megawatt nuclear orbit transfer vehicle (OTV) with a 5000 kg payload capacity. The system, which consists of a fixed bed reactor, a Brayton cycle power conversion system, and a liquid droplet radiator (LDR) to reject heat, is deployable from a small package. The methods and technologies of this design are discussed, as well as critical design problems. While this is a preliminary study, it indicates that a space-nuclear reactor, combined with the LDR, make possible a continuous 10 MW(e) power station on orbit with a single shuttle launch.

Hertzberg, A.↗
NASA NTRS1984

Testing the radiometric stability of HCMM thermal infrared data

A study conducted to test the radiometric stability of thermal infrared (TIR) data from the heat-capacity mapping mission (HCMM) satellites is considered. The radiance values associated with various land use and cover types in a regional study area centered on Washington, D.C. are examined. The study shows that for three different day TIR-data sets, the relative ranking of mean thermal values associated with five Level I and three Level II land-use/land-cover categories remains constant over time. Although HCMM predicted temperatures show variability up to 5 C from ground observed temperatures, the thermal measurements recorded by the satellite are fairly stable as indicators of surface temperature. A method for combining HCMM thermal data and Landsat multispectral scanner (MSS) data to improve the classification of Level I land-cover categories, and in particular the separability of urban and nonurban areas is described. A merged HCMM-MSS data set is found to yield the best results in terms of thematic-map accuracy.

Witt, R. G.↗
NASA NTRS1986

Chemistry of chlorine in dense interstellar clouds

Laboratory experiments and theoretical modeling show that the chemistry of chlorine is fairly simple in dense interstellar clouds, with Cl and HCl as the only species whose fractional abundances are significant. The estimated fraction of gas-phase chlorine present as HCl lies between 25-65 percent, in good agreement with the recent observations of the ground state HCl transition by Blake, Keene, and Philips (1985). These results, combined with the observational limits on HCl, indicate that chlorine is not severely depleted in dense interstellar clouds.

Blake, G. A.↗
NASA NTRS1987

Abundances in red giant stars - Carbon and oxygen isotopes in carbon-rich molecular envelopes

Millimeter-wave observations have been made of isotopically substituted CO toward the envelopes of 11 carbon-rich stars. In every case, C-13O was detected and model calculations were used to estimate the C-12/C-13 abundance ratio. C-17O was detected toward three, and possibly four, envelopes, with sensitive upper limits for two others. The CO-18 variant was detected in two envelopes. New results include determinations of oxygen isotopic ratios in the two carbon-rich protoplanetary nebulae CRL 26688 and CRL 618. As with other classes of red giant stars, the carbon-rich giants seem to be significantly, though variably, enriched in O-17. These results, in combination with observations in interstellar molecular clouds, indicate that current knowledge of stellar production of the CNO nuclides is far from satisfactory.

Wannier, P. G.↗
NASA NTRS1989

Hot isostatic pressing of silicon nitride with boron nitride, boron carbide, and carbon additions

Si3N4 test bars containing additions of BN, B4C, and C, were hot isostatically pressed in Ta cladding at 1900 and 2050 C to 98.9 percent to 99.5 percent theoretical density. Room-temperature strength data on specimens containing 2 wt pct BN and 0.5 wt pct C were comparable to data obtained for Si3N4 sintered with Y2O3, Y2O3 and Al2O3, or ZrO2. The 1370 C strengths were less than those obtained for additions of Y2O3 or ZrO2 but greater than those obtained from a combination of Y2O3 and Al2O3. SEM fractography indicated that, as with other types of Si3N4, room-temperature strength was controlled by processing flaws. The decrease in strength at 1370 C was typical of Si3N4 having an amorphous grain-boundary phase. The primary advantage of nonoxide additions appears to be in facilitating specimen removal from the Ta cladding.

Mieskowski, Diane M.↗
NASA NTRS1989

Ballistic-electron-emission microscopy of subsurface defects at the Au-GaAs(100) interface

The application of ballistic-electron-emission microscopy (BEEM) to a study of the influence of GaAs(100) substrate conditions on the formation of a multidefect structure at the Au-GaAs(100) Schottky barrier interface is described. Interfaces prepared on both melt-grown GaAs(100) wafer substrates and MBF-deposited GaAs(100) buffer layers are considered. As a comparison to the study of Au-GaAs(100) interfaces, BEEM imaging is performed on Au-Si(100) interfaces. It is noted that Au-GaAs(100) interface formation is relatively insensitive to the effects of substrate surface condition and substrate bulk defect density, and that the combination of BEEM imaging and BEEM spectroscopy indicates that the heterogeneous interface defects are the result of diffusion between the Schottky barrier electrodes.

Hecht, M. H.↗
NASA NTRS1991

On a global aerodynamic optimization of a civil transport aircraft

An aerodynamic optimization procedure developed to minimize the drag to lift ratio of an aircraft configuration: wing - body - tail, in accordance with engineering restrictions, is described. An algorithm developed to search a hypersurface with 18 dimensions, which define an aircraft configuration, is discussed. The results, when considered from the aerodynamic point of view, indicate the optimal configuration is one that combines a lifting fuselage with a canard.

Savu, G.↗
NASA NTRS1992

Improving the low temperature ductility of NiAl

The intermetallic NiAl exhibits excellent potential as a structural material for application in air-breathing and single-stage-to-orbit engines. Unfortunately NiAl is brittle at ambient temperature, which is partly attributed to the lack of five independent slip systems as required by von Mises criterion for uniform, volume conserving deformation since the operative group of zone axes (100) slip offers only three independent slip systems. Isostructural FeAl, however, deforms by group of zone axes (111) slip at room temperature which provides five independent slip systems. Thus, it was decided to macroalloy NiAl with Fe to promote group of zone axes (111) slip thereby possibly improving the ductility. For Ni - 30 at. (percent) Al - 20 at. (percent) Fe having essentially bcc microstructure indicated up to 6 percent tensile elongation combined with high yield strength (about 800 MPa). The results compare favorably with those of stoichiometric Ni - 50 at. (percent) Al which, however, deforms by group of zone axes (100) slip at room temperature. The multi-phase alloy approach has proven even more successful for Ni - 20 at. (percent) Al - 30 at. (percent) Fe. The high temperature ductility of the multi-phase alloy was attributed to deformation transfer across interphase boundaries and the crack stopping action of the constituent gamma/gamma' phase. While the constituent phase became increasingly brittle, the beta' phase became more ductile at elevated temperatures. Thus the multi-phase alloy did not exhibit any elevated temperature embrittlement. Similarly, while the beta' phase became weak at high temperatures, the gamma/gamma' phase exhibited better strength retention leading to the improved elevated temperature strength of the multi-phase alloy. Thus, the multi-phase alloy benefits from both its constituent phases, with each phase alleviating the disadvantages associated with the other phase over any temperature range. The multi-phase alloy approach is suggested as a possible approach to designing intermetallic-based alloys.

Guha, Sumit↗
NASA NTRS1992

A multiwavelength study of the supernova remnant N49 in the Large Magellanic Cloud

The 2.5-m du Pont telescope at Las Campanas, the IUE, and archival high-resolution imager X-ray data from the Einstein Observatory are used to present a detailed imaging and spectroscopic study of the SNR N49 in the LMC. The asymmetry of the optical image and the relatively high X-ray and optical luminosity of this remnant both arise from its interaction with an extended dense cloud to the southeast seen in CO emission. The optical spectra reveal clear evidence of reddening variations on spatial scales as small as about 2 arcsec over the face of the SNR. UV line emission is associated primarily with the bright optical filaments, and the total luminosity of N49 is measured in several optical and UV lines. A combined analysis of IUE and optical spectra indicates a range of radiative shock velocities. Implications for the interstellar medium surrounding N49 are discussed.

Vancura, Olaf↗
NASA NTRS1992

Stationary plasma thruster evaluation in Russia

A team of electric propulsion specialists from U.S. government laboratories experimentally evaluated the performance of a 1.35-kW Stationary Plasma Thruster (SPT) at the Scientific Research Institute of Thermal Processes in Moscow and at 'Fakel' Enterprise in Kaliningrad, Russia. The evaluation was performed using a combination of U.S. and Russian instrumentation and indicated that the actual performance of the thruster appears to be close to the claimed performance. The claimed performance was a specific impulse of 16,000 m/s, an overall efficiency of 50 percent, and an input power of 1.35 kW, and is superior to the performance of western electric thrusters at this specific impulse. The unique performance capabilities of the stationary plasma thruster, along with claims that more than fifty of the 660-W thrusters have been flown in space on Russian spacecraft, attracted the interest of western spacecraft propulsion specialists. A two-phase program was initiated to evaluate the stationary plasma thruster performance and technology. The first phase of this program, to experimentally evaluate the performance of the thruster with U.S. instrumentation in Russia, is described in this report. The second phase objective is to determine the suitability of the stationary plasma thruster technology for use on western spacecraft. This will be accomplished by bringing stationary plasma thrusters to the U.S. for quantification of thruster erosion rates, measurements of the performance variation as a function of long-duration operation, quantification of the exhaust beam divergence angle, and determination of the non-propellant efflux from the thruster. These issues require quantification in order to maximize the probability for user application of the SPT technology and significantly increase the propulsion capabilities of U.S. spacecraft.

Brophy, John R.↗
NASA NTRS1992

Astro-1 ultraviolet imaging of the 30 Doradus and SN 1987A fields with the Ultraviolet Imaging Telescope

A preliminary analysis of Ultraviolet Imaging Telescope (UIT) images in the 30 Doradus region is reported. Photometry was obtained for the 30 Doradus cluster and its UV-bright core, R136, in various UIT bandpasses. It is found that about 14 percent of the total FUV light and about 16 percent of the total near-UV light of the 3-arcmin diameter 30 Doradus cluster originates from the region within 5 arcsec of R136. The UV magnitudes and colors of R136 and other known O and Wolf-Rayet WN stars in the same field were measured. The UIT data, combined with published observations at longer wavelengths, indicate that R136a1, the brightest component of R136, is not a supermassive stars. A qualitative comparison between the UIT images, Einstein X-ray data, IRAS HiRes images, and ground-based CCD images in forbidden O III 5007 A, H-alpha, B, R, U, and Stromgren u is performed. The extended diffuse UV feature detected in the UIT images is correlated with the IR structure seen in the IRAS 60-micron HiRes image, which suggests the existence of large amounts of widely distributed dust in this region.

Cheng, Kwang-Ping↗
NASA NTRS1991

Passive range sensor refinement using texture and segmentation

Electrooptical sensors provide a covert way of computing range during helicopter flight. The optical flow-based computation of range provides range information only in certain distinguishable parts of the image. The regions where range information is available can be increased by performing texture analysis and object segmentation in the image. This paper reviews some of the literature on texture segmentation methods with a view towards applying them to images containing both man-made and natural objects at varying ranges. Two algorithmic approaches are given and their application to a real image is demonstrated. Results indicate that it will be necessary to combine several different texture measures and methods in a hierarchical way in order to achieve an object segmentation which is useful in enhancing range information.

Sridhar, Banavar↗