Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “code validation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Time-dependent water vapor desorption isotherm model of hardened cement paste

Highlights: • Short-term and long-term desorption isotherms of hardened cement paste are reviewed. • Water content at RH depends on both thermodynamic and microstructural equilibria. • An extended GAB equation is proposed to fit the cavitation drop during desorption. • A dynamic time-dependent sorption isotherm model is shown and used for simulations. • Numerical results capture anomalous drying in the same RH as seen experimentally. This study aims to enhance moisture transport modeling by elucidating the so-called anomalous water diffusion in cementitious materials. Water desorption isotherms are measured from samples at various drying stages using techniques with different durations to quantify the impact of the drying duration on the water sorption ability. A single water sorption isotherm does not solely give a relationship between the water content and relative humidity but also represents the state of microstructure. The continuous evolution of a desorption isotherm due to drying-induced microstructural rearrangement is demonstrated. For numerical modeling, the microstructural alteration can be explicitly considered through a dynamic desorption isotherm model, which governs the local thermodynamic equilibrium at the capillary meniscus. This approach is implemented into a multiphase transport code, whose ability to predict drying is validated using literature data. Finally, the effect of prolonged drying on the colloidal nature of the calcium-silicate-hydrate gel is discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Models implemented in the methodological approach to design the initial STEP first wall contour

The official Spherical Tokamak for Energy Production mission aims to demonstrate the ability to generate net electricity from fusion with the STEP Prototype Power plant. One of the key technological and engineering challenges in fusion power plants is managing the loads on the first wall within acceptable limits. Therefore, the conceptual design development of the STEP Prototype Power plant needs to be based on load estimates derived using legitimate plasma physics assumptions through dynamic and flexible tools. The current design foresees the STEP main chamber first wall to withstand steady-state heat loads of up to ~1 MW/m 2 , excluding critical regions expected to receive higher heat loads such as the baffle regions approaching the divertors. These critical areas will require ad hoc assessments and will be designed with the presence of limiters. This article focuses on the models and methodology adopted for designing the 2-D poloidal contour of the STEP first wall, based on the anticipated charged particle and radiation heat loads during normal operation. Firstly, the models adopted for calculating the charged particle and radiation heat loads are introduced. The first model is validated through benchmarking against the particle tracing code SMARDDA, while the second model is verified by comparing it with data from the MAST-U experiment. Secondly, the model used to design the 2-D first wall contour according to the heat loads is explained. We acknowledge that this preliminary design stage assumes certain simplifications, notably an axisymmetric geometry, for computational efficiency and clarity in presentation. It is understood that subsequent design phases will address the complexities of real-world engineering, including non-axisymmetric effects, transient plasma scenarios, and the impact of disruptions on the first wall design. Finally, an automatic procedure based on these models is presented for defining the 2-D poloidal contour of the STEP first wall to minimize heat loads, taking into account the need to radiate most of the alpha-particle and auxiliary heating power. Here, by providing an overview of the models, methodology, and an automatic procedure, this paper contributes to the design process of the STEP first wall, addressing the engineering challenges associated with fusion power plant development.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Physics basis for the Wisconsin HTS Axisymmetric Mirror (WHAM)

The Wisconsin high-temperature superconductor axisymmetric mirror experiment (WHAM) will be a high-field platform for prototyping technologies, validating interchange stabilization techniques and benchmarking numerical code performance, enabling the next step up to reactor parameters. A detailed overview of the experimental apparatus and its various subsystems is presented. WHAM will use electron cyclotron heating to ionize and build a dense target plasma for neutral beam injection of fast ions, stabilized by edge-biased sheared flow. At 25 keV injection energies, charge exchange dominates over impact ionization and limits the effectiveness of neutral beam injection fuelling. This paper outlines an iterative technique for self-consistently predicting the neutral beam driven anisotropic ion distribution and its role in the finite beta equilibrium. Beginning with recent work by Egedal et al. ( Nucl. Fusion , vol. 62, no. 12, 2022, p. 126053) on the WHAM geometry, we detail how the FIDASIM code is used to model the charge exchange sources and sinks in the distribution function, and both are combined with an anisotropic magnetohydrodynamic equilibrium solver method to self-consistently reach an equilibrium. We compare this with recent results using the CQL3D code adapted for the mirror geometry, which includes the high-harmonic fast wave heating of fast ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Induced protein expression in Leptospira spp. and its application to CRISPR/Cas9 mutant generation

Abstract Expanding the genetic toolkit for Leptospira spp. is a crucial step toward advancing our understanding of the biology and virulence of these atypical bacteria. Pathogenic Leptospiraare responsible for over 1 million human leptospirosis cases annually and significantly impact domestic animals. Bovine leptospirosis causes substantial financial losses due to abortion, stillbirths, and suboptimal reproductive performance. The advent of the CRISPR/Cas9 system has marked a turning point in genetic manipulation, with applications across multiple Leptospira species. However, incorporating controlled protein expression into existing genetic tools could further expand their utility. We developed and demonstrated the functionality of IPTG-inducible heterologous protein expression in Leptospira spp. This system was applied for regulated expression of dead Cas9 (dCas9) to generate knockdown mutants, and Cas9 to produce knockout mutants by inducing double-strand breaks (DSB) into desired targets. IPTG-induced dCas9 expression enabled validation of essential genes and non-coding RNAs. Additionally, IPTG-controlled Cas9 expression combined with a constitutive non-homologous end-joining (NHEJ) system allowed for successful recovery of knockout mutants, even in the absence of IPTG. These newly controlled protein expression systems will advance studies on the basic biology and virulence ofLeptospira, as well as facilitate knockout mutant generation for improved veterinary vaccines.

Science & Technology - Other Topics↗
DOE OSTI2022

Equilibrium reconstruction of DIII-D plasmas using predictive modeling of the pressure profile

New workflows have been developed for predictive modeling of magnetohydrodynamic (MHD) equilibrium in tokamak plasmas. The goal of this work is to predict the MHD equilibrium in tokamak discharges without having measurements of the kinetic profiles. The workflows include a cold start tool, which constructs all the profiles and power flows needed by transport codes; a Grad–Shafranov equilibrium solver; and various codes for the sources and sinks. For validation purposes, a database of DIII-D tokamak discharges has been constructed that is comprised of scans in the plasma current, toroidal magnetic field, and triangularity. Initial efforts focused on developing a workflow utilizing an empirically derived pressure model tuned to DIII-D discharges with monotonic safety factor profiles. This workflow shows good agreement with experimental kinetic equilibrium calculations, but is limited in that it is a single fluid (equal ion and electron temperatures) model and lacks H-mode pedestal predictions. The best agreement with the H-mode database is obtained using a theory-based workflow utilizing pressure profile predictions from a coupled TGLF turbulent transport and EPED pedestal models together with external magnetics and Motional Stark Effect (MSE) data to construct the equilibrium. Here, we obtain an average root mean square error of 5.1% in the safety factor profile when comparing the predicted and experimental kinetic equilibrium. We also find good agreement with the plasma stored energy, internal inductance, and pressure profiles. Including MSE data in the theory-based workflow results in noticeably improved agreement with the q-profiles in high triangularity discharges in comparison with the results obtained with magnetic data only. The predictive equilibrium workflow is expected to have wide applications in experimental planning, between-shot analysis, and reactor studies.

Kinsey, J. E. (ORCID:0000000193347473)↗
DOE OSTI2022

Hazma meets HERWIG4DM: precision gamma-ray, neutrino, and positron spectra for light dark matter

Herein we present a new open-source package, Hazma 2, that computes accurate spectra relevant for indirect dark matter searches for photon, neutrino, and positron production from vector-mediated dark matter annihilation and for spin-one dark matter decay. The tool bridges across the regimes of validity of two state of the art codes: Hazma 1, which provides an accurate description below hadronic resonances up to center-of-mass energies around 250 MeV, and Herwig4DM, which is based on vector meson dominance and measured form factors, and accurate well into the few GeV range. The applicability of the combined code extends to approximately 1.5 GeV, above which the number of final state hadrons off of which we individually compute the photon, neutrino, and positron yield grows exceedingly rapidly. We provide example branching ratios, particle spectra and conservative observational constraints from existing gamma-ray data for the well-motivated cases of decaying dark photon dark matter and vector-mediated fermionic dark matter annihilation. Finally, we compare our results to other existing codes at the boundaries of their respective ranges of applicability. Hazma 2 is freely available on GitHub athttps://github.com/LoganAMorrison/Hazma.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

A comparison between ShapeFit compression and Full-Modelling method with PyBird for DESI 2024 and beyond

DESI aims to provide one of the tightest constraints on cosmological parameters by analysing the clustering of more than thirty million galaxies. However, obtaining such constraints requires special care in validating the methodology and efforts to reduce the computational time required through data compression and emulation techniques. In this work, we perform a rigorous validation of the PyBird power spectrum modelling code with both a traditional emulated Full-Modelling approach and the model-independent ShapeFit compression approach. By using cubic box simulations that accurately reproduce the clustering and precision of the DESI survey, we find that the cosmological constraints from ShapeFit and Full-Modelling are consistent with each other at the ∼ 0.5σ level for the ΛCDM model. Both ShapeFit and Full-Modelling are also consistent with the true ΛCDM simulation cosmology down to a scale of k max = 0.20 hMpc -1 even after including the hexadecapole. For extended models such as the wCDM and the oCDM models, we find that including the hexadecapole can significantly improve the constraints and reduce the modelling errors with the same k max . While their discrepancies between the constraints from ShapeFit and Full-Modelling are more significant than ΛCDM, they remain consistent within 0.7σ. Lastly, we also show that the constraints on cosmological parameters with the correlation function evaluated from PyBird down to s min = 30h -1 Mpc are unbiased and consistent with the constraints from the power spectrum.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Anomalous Absorption by the Two-Plasmon Decay Instability

Radiation-hydrodynamic simulations of directly driven fusion experiments at the Omega Laser Facility predict absorption accurately when targets are driven at low overlapped laser intensity. Discrepancies appear at increased intensity, however, with higher-than-expected laser absorption on target. Strong correlations with signatures of the two-plasmon decay (TPD) instability—including half-harmonic and hard-x-ray emission—indicate that TPD is responsible for this anomalous absorption. Scattered light data suggest that up to ≈ 30 % of the laser power reaching quarter-critical density can be absorbed locally when the TPD threshold is exceeded. A scaling of absorption versus TPD threshold parameter was empirically determined and validated using the laser–plasma simulation environment code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

RADIATION DOSE SIMULATIONS FOR JEFFERSON LAB’S PERMANENT MAGNET RESILIENCY LDRD STUDY

In late 2023, Thomas Jefferson National Accelerator Facil- ity (Jefferson Lab) funded a Laboratory Directed Research and Development (LDRD) grant dedicated to investigating the impact of radiation on permanent magnet materials. This research initiative is specifically geared towards assessing materials slated for use in the CEBAF energy upgrade. The experimental approach involves strategically placing perma- nent magnet samples throughout the accelerator, exposing them to varying radiation doses. The simulation code BD- SIM is used to first validate the data and then to simulate the effects on future higher energy passes to study the degra- dation effects on the permanent magnets. In this paper we present the progress of that work.

Deitrick, K.↗
DOE OSTI2020

Technical Interface Coordination with SHINE (FY2020 Summary)

In FY20, Los Alamos National Laboratory (LANL) performed technical interface coordination with SHINE including coordination of SHINE CFD and thermal hydraulics conference calls, national laboratory conference calls, and program management activities such as reporting and tracking requirements for current FY20 activities. SHINE did not request any general technology consultation support for emergent issues. LANL has participated in the bi-weekly conference calls with SHINE and other national laboratories regarding LANL’s current activities. Activities discussed include the Supo 3-D CFD model geometry validation, releasing the CFD-MCNP coupled codes for the generic solution vessel simulations, and the ANL bubble experiment #2 design, preparation, and collaboration.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

BISON TRISO Modeling Advancements and Validation to AGR-1 Data

BISON is a finite element-based nuclear fuel performance code. Among its unique characteristics are its ability to model 1D, 2D, and 3D geometries and its applicability to a wide variety of nuclear fuels. For the last eight years, BISON has included a beginning capability to model tri-structural isotropic (TRISO) fuel. Recently, interest in TRISO fuel has grown, and a significant effort has been made to improve BISON’s capabilities in this area. Capability development has occurred for each material present in TRISO fuel particles: the buffer, inner pyrolytic carbon, silicon carbide, and outer pyrolytic carbon layers, as well as the fuel kernel. New elastic, creep, swelling, thermal expansion, thermal conductivity, and fission gas release (FGR) models are available. New models for the graphite matrix are also now available. Another important addition is the ability to perform statistical failure analysis of large samples of fuel particles. This new capability, which continues to grow, enables evaluation of failure due to pressure or crack formation by analyzing many thousands of particles. This enables realistic calculations of fission product release from the many particles in a TRISO-fueled reactor. These capabilities were checked via regression and verification tests. A large number of code benchmarking problems were also run, showing that BISON’s results closely match those of other software tools. Finally, a significant validation effort was completed in which fission product release, measured as part of the AGR-1 capsule experiments, was compared to BISON outputs. BISON outputs compared very well to the experimental data and to PARFUME results. Interest in BISON’s TRISO capabilities is growing, with the U.S. Nuclear Regulatory Commission (NRC) and Westinghouse Electric Company receiving training during the past year. Multiple other entities have expressed interest in or are actively using BISON. Kairos Power, LLC, has a strong partnership with Idaho National Laboratory (INL) regarding the use of BISON for TRISO analysis. While its capabilities still continue to grow, BISON has already become a powerful tool for TRISO analysis.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Advanced Measurement and Visualization Techniques for High-Temperature Heat Pipe Experiments

This report conducts a preliminary investigation of the available literature and summarizes some potential advanced measurement and visualization techniques for operating high-temperature heat pipe (HP) that can be implemented to support the United States (U.S.) Department of Energy (DOE) Microreactor Program (MRP). The primary objective for the extensive literature research is to investigate the possibilities and feasibility for the design and construction of an advanced experimental test facility with the aim of producing high-fidelity high-resolution heat pipe data during its operation. Based on the existing HP test facilities at Idaho National Laboratory (INL)—including the Single Primary Heat Extraction and Removal Emulator (SPHERE) and the Microreactor Agile Non-Nuclear Experimental Test Bed (MAGNET)—further efforts will be made to examine the technical feasibility to HP measurements and support the research, development, and demonstration (RD&D) process for an HP-cooled microreactor. Continuing collaborations with the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program, other research institutes and universities are considered to be extremely important so that the experimental facility and resultant database can satisfy the validation needs of advanced heat pipe modeling codes being developed under DOE NEAMS program.

42 ENGINEERING↗
DOE OSTI2024

System Level Analysis Software Validation with Argonne's THETA Experimental Facility (Final CRADA Report)

Under this CRADA, the Contractor will be generating and collecting sodium-based experimental data with modern instrumentation. The Contractor will work symbiotically with the Participant to generate SAS4A/SASSYS-1 and SAM computational models of the THETA experimental facility for validation of the system-level analysis codes utilized by Oklo, Inc. This effort will be specifically focused on the design basis event space scoped by Chapter 15 of the NRC’s Standard Review Plan (NUREG-0800) with an emphasis on natural circulation and thermal stratification phenomena in a prototypic sodium-cooled fast reactor (SFR).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Qualification of Digitized Legacy Fast Reactor Data

The Integral Fast Reactor (IFR) fuel compatibility test program (1984-1994) included a variety of fuel pin examinations conducted at the Hot Fuel Examination Facility (HFEF) and the Alpha-Gamma Hot Cell Facility (AGHCF). Hard copy data records of these examinations have been recovered, scanned, and preserved in PDF format. Many hard copy records are now qualified in accordance with an NRC-approved Quality Assurance Program Plan (QAPP), and there is an ongoing effort to qualify additional legacy records. This legacy fuel performance data is vital to support design and licensing of fast reactors with validation of state-of-the-art codes and advanced methods for design and analysis. Stakeholders can most easily utilize this data when the PDF scans have been converted into digital data tables. However, qualification of the scanned hard copy data does not qualify the digital data file resulting from the digitization of the data contained in the record; the subject matter expert (SME) must make a review of the digitized data table as well before it can be designated as qualified. This report outlines a peer review process to qualify the digital data file(s), typically in CSV format, corresponding to hard copy records in accordance with the existing QAPP.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2026

A Streamlined, Open Source Neutronics Toolkit for Fusion Reactor Design (Final Report)

Final report for the DOE Fusion Energy Sciences project titled "A Streamlined, Open Source Neutronics Toolkit for Fusion Reactor Design". This project developed unstructured mesh tracking capabilities in OpenMC as well as two shutdown dose rate methodologies, and performed extensive performance improvements and validation of the open source Monte Carlo code, OpenMC.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Pre-Equilibrium De-Excitations in Neutrino-Nucleus Interactions

Pre-equilibrium de-excitation is a well-established stage of nucleon-induced nuclear reactions but has not previously been incorporated into neutrino event generators. This work implements the Koning-Duijvestijn exciton model within the MARLEY neutrino event generator to simulate energy redistribution and particle emission before compound nucleus equilibrium. The implementation includes modular calculations of particle-hole state densities, internal transition rates, emission rates, and Monte Carlo cascade sampling, and is validated against the TALYS-2.2 nuclear reaction code. A new event record is also proposed to enable future uncertainty reweighting studies. This work establishes the first framework for studying pre-equilibrium effects in neutrino-induced reactions, with the goal of improving predictions of particle multiplicities, γ-ray production, and MeV-scale detector signals relevant to experiments such as DUNE.

Visser, Erin [Michigan State U., East Lansing (mai↗
DOE OSTI2026

OC6 Phase Ia - Nonlinear hydrodynamic loading validation dataset

Two validation campaigns were examined within the Offshore Code Comparison Collaboration, Continued, with Correlation and unCertainty (OC6) Phase 1 project to examine the modeling tools' underprediction of loads and motion of a floating wind semisubmersible (semi) at their surge and pitch natural frequencies. These campaigns were performed at the Maritime Research Institute Netherlands (MARIN) in 2017 and 2018. The load cases (LC) considered include: LC1 – Load measurements across semi under current loading; LC2 - Load measurements across semi under forced surge oscillation; LC3 – Load measurements across semi under wave loading, while held fixed; LC4 – Free-decay motion measurements in surge, pitch, and heave; and LC5 – Motion measurements under wave loading. Details on the results from the OC6 Phase Ia project can be found in the reference, “OC6 Phase 1: Investigating the underprediction of low-frequency hydrodynamic loads and responses of floating wind turbines”, J Phys: Conf Series 1618 032033.

17 WIND ENERGY↗