SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This presentation covers a feasibility study of utilizing electricity to produce intermediates from CO2 and Biomass which was presented at the DOE Bioenergy Technologies Office (BETO) 2023 Project Peer Review.
To assist building heating electrification, this paper numerically investigates a load flexible heat pump system for commercial buildings. The system consists of a CO2 vapor compression cycle, a sensible thermal storage tank, and an air handling unit. The thermal storage medium is inexpensive, non-toxic and stable anti-freeze solution (30% potassium acetate). The air handing unit has an indoor coil and a ventilation coil. The system can be used to manage building electric load. During peak hours, the heat pump is off and the hot solution water is discharged from the tank to heat up the indoor air and ventilation air. During the hour of charge, the heat pump delivers hot solution water to the tank and to the air. The tank can also stand by while the heat pump provides space heating directly. We selected a medium sized office building located in Minnesota as the representative building and used EnergyPlus to obtain its 24 hour load data. We designed three storage tank volumes assuming 50 degrees C, 65 degrees C and 80 degrees C tank temperatures to independently provide the building load for 4 hours in the morning. The higher the tank temperature, the smaller the required volume, and thus higher energy density. The effective energy density is 78 with an 80 degrees C tank, and 40 kWhth/m3 with 50 degrees C. We simulated the tank integrated heat pump performance subjected to the 24-hour building load profile and ambient data. The baseline is the same system without storage tank. There was a trade-off between the storage energy density and the charging COP. The charge hour COP was 2.77 to charge the tank to 80 degrees C, and 3.01 to 50 degrees C. The proposed system could shift building load from the peak hours (8:00 - 12:00) to off-business hour (23:00 - 7:00+1). It eliminated 100% compressor electricity use during the peak hours, and avoided a peak electric power of 34 kW. The 65 degrees C tank saved 9.5 kWhe (4%) considering all day operation, which was the best balance between energy density and the system operation efficiency among the three options.
Supercritical CO2 (sCO2) power cycles, particularly direct-fired cycles, have the possibility of revolutionizing clean fossil energy with peak temperatures above 700 °C and wrought precipitation strengthened alloys like Haynes 282™ for structural components. At temperatures <650 °C, it would be desirable to use less expensive alloys, however, steels are known to be susceptible to carburization. Laboratory 300 bar sCO2 autoclave results were collected on a range of alloys including less expensive Ni-based alloys like 825 compared to advanced austenitic steels like alloy 709 at 600 °C. Both alloys 825 and 709 formed thin, protective Cr-rich oxides after 1,000 h. Alloy 825 also was exposed for 1,000 h in sCO2 at 800 °C and compared to a range of Ni-based alloys. Comparing alloys 625, 825, and 282, the mass gain increased with increasing alloy Ti content under these conditions. High Al superalloys did not perform significantly better under these conditions at 800 °C.
Ad-Ni5Ga3/SiO2 catalyst, which is highly active and stable for thermal CO2 hydrogenation to methanol, was investigated to understand its surface dynamics during reaction conditions. The catalyst was prepared, tested and characterized using a multitude of techniques, including ex-situ XRD, TEM, H2-TPR, CO chemisorption and in-situ ETEM and APXPS. The formation of Ga2O3 upon air exposure was observed and the consequences on catalytic activity were investigated. Results revealed that upon air exposure Ga migrates from the subsurface region to the surface of the nanoparticles forming a Ga-oxide shell surrounding a metallic core. The oxide shell can be reduced completely at high temperatures and the temperature of the reduction activation treatment plays a crucial role on the catalytic activity. This air exposure-reduction procedure results in a redistribution of the Ga species in the surface/subsurface region, promoted by a higher Ga affinity for oxygen. XRD analysis of the post-reaction samples provide evidence for the partial transformation of a Ni5Ga3 intermetallic phase into a Ni-rich Ni3Ga phase. APXPS data indicate that the Ni-rich phase forms in the subsurface region. A Ga-rich phase exists on the surface, where the Ni/Ga ratio reaches 2/3 upon activation in hydrogen. At low reduction temperatures an amorphous Ga2O3 shell remains, indicating a promotion effect on methanol synthesis activity.
Belowground organisms forming complex cross-trophic ecological networks are essential for maintaining peatland carbon stability and energy flow. However, how peatland degradation affects the biodiversity and cross-trophic ecological networks of soil communities remains poorly understood. Here, we examined the degradation effects on soil prokaryotes (i.e., bacteria, archaea), fungi and nematodes in alpine peatlands on the eastern Tibetan Plateau, characterized by varying water table depths (indicating degradation levels). We found that peatland degradation, accompanied by significant shifts in soil moisture and pH (P < 0.05), reduced the taxonomic richness and phylogenetic diversity of prokaryotes, fungi, and nematodes, particularly in deeper soil layers (20–50 cm). Crucially, peatland degradation weakened potential cross-trophic interactions within bipartite networks of prokaryotes-nematodes and fungi-nematodes, resulting in less than 6.5 %–28.8 % of unchanged modules. Degradation-induced changes in soil moisture and pH were identified as primary drivers of biodiversity loss and network restructuring. Furthermore, such changes of belowground cross-trophic networks (particularly prokaryote-nematode) were significantly correlated with greenhouse gas emissions, such as decreased CO2 emissions, maintained CH4 emissions (leading to a higher CH4/CO2 ratio in deep layers), and reduced temperature sensitivity (Q10) of soil respiration. These findings underscore the critical need to protect soil biodiversity and cross-trophic networks in peatlands, particularly under the threat of climate change, to preserve peatland carbon stocks and maintain ecosystem stability. Our findings highlight that belowground cross-trophic networks are pivotal to decipher soil carbon dynamics of degraded peatlands and project the fate of peatland carbon stocks under future climate change scenarios.
Microseismic monitoring can play a crucial role to ensure safe long-term geological carbon storage. For reliable long-term monitoring for CO2-injection-induced microseismic events, a surface seismic array is desirable in addition to borehole geophone sensors. Optimal design of surface seismic network is of great interest to achieve cost-effective monitoring. We develop a methodology to determine the optimal number of surface seismic stations with a geometrically satisfactory distribution for given monitoring regions. We design an optimal microseismic monitoring network based on widely-accepted guiding principles, and the relationship between the location accuracy of microseismic events and the total number of seismic stations. We determine the optimal number of seismic stations based on the trade-off curve of the event location accuracy vs. the total number of seismic stations. We apply our optimal design method to the Kimberlina carbon storage site in California. We use a synthetic Kimberlina model to show that approximately 20 surface seismic stations with a geometrically satisfactory distribution are preferred for the best trade-off between the cost and the event location accuracy.
Intermetallic compounds (IMCs) are attractive platforms for elucidating structure−catalysis relationships due to their ordered atomic structure and well-defined bulk composition. Yet, how their surfaces reconstruct under reaction conditions and how such reconstruction is governed by bulk stoichiometry remain poorly understood. Here, we show that SiO2-supported Ni−In IMCs undergo reaction-driven surface reconstruction during CO2 hydrogenation and that bulk stoichiometry can be used to steer this evolution toward methanol formation. Among the compositions examined (Ni2In1, Ni1In1, Ni2In3, and Ni1In2), Ni2In3/SiO2 exhibits the highest methanol selectivity (∼70%) and a methanol space-time yield of 652 mg·gmetal−1·h−1 at 250 °C and 30 bar. Combined structural, surface characterization, and kinetic analyses suggest that the intermetallic bulk remains largely preserved, whereas the surface departs from the stoichiometric bulk and evolves toward InOx-enriched surface domains coupled to an electron-rich Ni−In intermetallic phase. The extent of this evolution depends strongly on the bulk Ni:In stoichiometry and is most pronounced for Ni2In3/SiO2. These findings identify bulk stoichiometry as a handle for tuning the working-state surface of intermetallic catalysts and provide a basis for designing methanol synthesis catalysts through controlled surface reconstruction.
Single crystals and shape-controlled nanocrystals are well known to exhibit facet-dependent catalytic properties. However, few studies have investigated how those nanocrystals evolve and (de)activate during reactions, calling for the development of nanoscale time-resolved operando methods. In this context, we have designed Cu nanocubes as a model system to elucidate the underlying driving force of dynamic nanocatalyst reconstruction during the CO2 reduction reaction (CO2RR). Operando electrochemical liquid-cell scanning transmission electron microscopy (EC-STEM) and synchrotron-based X-ray spectroscopy reveal the size- and potential-dependent complete transformation from (100)-oriented Cu@Cu2O nanocubes to polycrystalline metallic Cu nanograins under CO2RR conditions. In addition, machine learning-assisted operando four-dimensional STEM reveals that large Cu nanograins derived from nanocubes form mainly crystalline domains, while their smaller counterparts are more amorphous due to faster evolution kinetics. In situ Raman spectroscopy and density functional theory calculations suggest that CO drives the ejection of single Cu atoms, resulting in few-nanometre Cu clusters and the surface migration of highly mobile copper carbonyl (Cu–CO) species. Combined, these multimodal operando methods and theoretical approaches pave the way for understanding the complex structural evolution of energy-related nanocatalysts under electrochemical conditions.
Abstract Microbially induced carbonate precipitation (MICP) is a natural process with potential biotechnological applications to address both carbon sequestration and sustainable construction needs. However, our understanding of the microbial processes involved in MICP is limited to a few well-researched pathways such as ureolytic hydrolysis. To expand our knowledge of MICP, we conducted an omics-based study on sedimentary communities from travertine around the CO2-driven Crystal Geyser near Green River, Utah. Using metagenomics and metaproteomics, we identified the community members and potential metabolic pathways involved in MICP. We found variations in microbial community composition between the two sites we sampled, but Rhodobacterales were consistently the most abundant order, including both chemoheterotrophs and anoxygenic phototrophs. We also identified several highly abundant genera of Cyanobacteriales. The dominance of these community members across both sites and the abundant presence of photosynthesis-related proteins suggest that photosynthesis could play a role in MICP at Crystal Geyser. We also found abundant bacterial proteins involved in phosphorous starvation response at both sites suggesting that P-limitation shapes both composition and function of the microbial community driving MICP.
Abstract Cell wall properties play a major role in determining photosynthetic carbon uptake and water use through their impact on mesophyll conductance (CO2 diffusion from substomatal cavities into photosynthetic mesophyll cells) and leaf hydraulic conductance (water movement from xylem, through leaf tissue, to stomata). Consequently, modification of cell wall (CW) properties might help improve photosynthesis and crop water use efficiency (WUE). We tested this using 2 independent transgenic rice (Oryza sativa) lines overexpressing the rice OsAT10 gene (encoding a “BAHD” CoA acyltransferase), which alters CW hydroxycinnamic acid content (more para-coumaric acid and less ferulic acid). Plants were grown under high and low water levels, and traits related to leaf anatomy, CW composition, gas exchange, hydraulics, plant biomass, and canopy-level water use were measured. Alteration of hydroxycinnamic acid content led to statistically significant decreases in mesophyll CW thickness (−14%) and increased mesophyll conductance (+120%) and photosynthesis (+22%). However, concomitant increases in stomatal conductance negated the increased photosynthesis, resulting in no change in intrinsic WUE (ratio of photosynthesis to stomatal conductance). Leaf hydraulic conductance was also unchanged; however, transgenic plants showed small but statistically significant increases in aboveground biomass (AGB) (+12.5%) and canopy-level WUE (+8.8%; ratio of AGB to water used) and performed better under low water levels than wild-type plants. Our results demonstrate that changes in CW composition, specifically hydroxycinnamic acid content, can increase mesophyll conductance and photosynthesis in C3 cereal crops such as rice. However, attempts to improve photosynthetic WUE will need to enhance mesophyll conductance and photosynthesis while maintaining or decreasing stomatal conductance.
Compact heat exchangers using supercritical fluids such as CO2 are preferred due to their high heat transfer capacity and smaller footprint. Three-dimensional conjugate forced convection heat transfer analysis was performed on several shell-and-tube counter-flow microchannel heat exchangers. Numerical simulations were conducted to test effect of change in mass flow rate, hydraulic diameter and various cross sections on the heat transfer. Increasing mass flow rate improved heat transfer up to a maximum value and then decreased downstream with increasing turbulence. Maximum heat transfer was obtained for the micro channel with the smallest hydraulic diameter. Amongst the cross sections analyzed (circular, square, circular with radial ribs, and square with radial ribs), the most uniform distribution of temperature and maximum heat transfer were obtained for circular cross section with radial ribs. An optimally efficient operation of such a heat exchanger can be attained by considering these factors during multi-objective constrained optimization of geometric parameters and requirements for additive manufacturing of such compact heat exchangers.
Abstract As the supercritical CO2 power cycle develops and the component technologies mature, there is still a need to reduce the associated capital and operating costs to maintain a competitive levelized cost of electricity (LCOE) in order to enter the market. When considering concentrating solar power (CSP) coupled with an sCO2 power block and sensible thermal storage, the technology presents a clean source for utility-scale power generation to support baseload or peak-load electrical demand. However, the LCOE of the technology is still considered higher than the competing technologies and should be reduced to better compete in the market; 2030 targets for dispatchable solar plants are 5¢/kWh for baseload CSP and 10¢/kWh for peaker plants, as set by the United States Department of Energy. In response to this need, this study is targeting improvements in the power cycle precooler to reduce power block contribution to LCOE. This study considers a dry cooler, as CSP plants are sensitive to water consumption because many installations are slated for remote or arid locations where solar irradiance is very high, but water is scarce. Furthermore, the power block footprint for an sCO2 system is quite compact, especially as compared to a steam cycle. Therefore, there is interest in installing a more compact dry cooler that is proportional to the reduced footprint sCO2 power block, while conventional dry coolers are an order of magnitude larger. The competing goals of size, performance, and cost were considered in this study to develop a compact dry cooler that can easily be packaged with the power block, significantly reducing the installation and transport cost compared to the current state of the art, while maintaining or improving upon the heat transfer performance and impact on plant LCOE. This paper details the high-level findings of a large dry cooler sensitivity study for design point selection, design of the compact dry cooler, expected year-round performance for the dry cooler and the power cycle, and the predicted LCOE for a 30-year plant life. It was found that an aluminum heat exchanger core can be suitably designed to meet the pressure and temperature requirements for a precooler in an sCO2 recompression Brayton cycle. The dry cooler assembly was found to have improved heat transfer performance, allowing for increased cycle efficiencies and a reduced plant LCOE. When coupled with a centrifugal blower and compact transition duct, the dry cooler assembly was able to reduce the installation footprint by over 50%.
Abstract Clean energy generation is gaining significant attention from industries, academia, and governments across the globe. The Allam cycle is one such technology that has been under focus due to its efficiency, environmental friendliness, and economics. This is a direct-fired cycle operating at supercritical conditions using carbon dioxide as a working fluid. Fuel or oxidizer jet mixing with CO2 is a vital phenomenon that governs combustion efficiency, and it is not well understood for the Allam cycle conditions. This paper experimentally investigated the jet characteristics of a methane jet injected into a subcritical to supercritical carbon dioxide environment. A wide range of injection pressures and temperatures were targeted between subcritical to supercritical conditions. Unlike previous studies, the current work focused on injecting lower-density (methane) jets into higher-density (carbon dioxide) environments. Schlieren imaging and methane absorption measurements were simultaneously performed with a CMOS high-speed camera and a 3.39 μm infrared laser. Specifically, we looked at the classical injection parameter of jet spreading angle, which was classically established to be mainly a density ratio function. Here, the jet cone angle was obtained from the postprocessed schlieren imaging. The jet cone angle is a critical characteristic parameter that describes the entrainment rate in a jet; thus, it is a crucial parameter in understanding the nature of the jet. The laser measurements were only used as an additional check to confirm the entry time of methane into the chamber filled with carbon dioxide. Notably, this paper makes a detailed comparison between the jet cone angles of jets with a density ratio. The result showed that the classical correlations, such as Abramovich's theory applied to submerged turbulent gas jets developed for low-density ratio jets, were unsuitable for higher-density ratio jets. It was also observed that the divergence angles were dependent not only on density ratio but also on other parameters such as pressure ratios and reduced pressures.
An advanced first stage high pressure turbine blade for a supercritical CO2 power cycle is tested in the Big Rig for Aerothermal Stationary Turbine Analysis (BRASTA) annular cascade at the Purdue Experimental Turbine Aerothermal Laboratory (PETAL) high pressure blow down facility alongside a baseline blade for comparison of aerodynamic performance. Both geometries are tested simultaneously using a novel off-axis rig design to allow for the blade geometries to be scaled up to achieve higher Reynolds numbers. The off-axis design necessitates the use of discrete sectors of airfoils, which are designed and additively manufactured in house using an mSLA printer. Printing the blades allows for unique routing of passage for blade surface static pressure taps that contour to the blade shape instead of requiring a straight line view from surface tap to egress, allowing all instrumentation for 15%, 50%, and 85% span to exist in the same passage. A flow conditioning gauze [1] is placed upstream of the blade passages to impart pressure, Mach, and swirl profiles to mimic the rotor relative frame inlet conditions to the blade. Downstream, a sonic valve is used to alter the backpressure to achieve different pressure ratios for different blowdown setpoints. The design of the rig, sonic wheel, and instrumentation are discussed along with the manufacturing and GD&T of the blades with respect to the build-up of this novel experimental apparatus. Initial commissioning data is obtained from inlet total pressure and temperature rakes, blade static pressure taps, and exit total pressure rakes. Oil visualization is performed using a silicone oil mixture containing titanium dioxide and pigmented for contrast of the blade suction side surface with the hub and shroud endwalls. The viscosity of the oil is tuned so that the oil does not fully thin and blow away during the time of the test, and endoscopic cameras are placed in the rig for live monitoring and recording. The preliminary oil visualization and rake profiles are presented, showcasing the operability of this additively manufactured off-axis flow path design.
Detailed outputs and interactive visualization to accompany the manuscript titled "The economic accessibility of CO2 sequestration through bioenergy with carbon capture and sequestration (BECCS) in the US" submitted to the journal "Land" in 2020. https://public.tableau.com/profile/billion.ton.2016#!/vizhome/ORNLBECCS2020/CO2EMITANDCAPTURE2
The overarching goal of this work is to determine how the United States can avoid being constrained by transportation limitations as the CCUS process evolves to a full gigaton-level system. The model is data-driven, open to CO2 supply and demand points defined as input data, and designed to allow for transportation on waterways, rail, or pipeline.
CHEESE is an interactive dashboard tool for estimating the performance and material requirements of carbon dioxide electrolysis systems. It helps users evaluate how electrode area, current density, product selectivity, gas flow, cell voltage, and the number of cells in a stack affect system operation. The dashboard provides simple and advanced modes so it can be used for both quick estimates and more detailed engineering analysis. Users can estimate product output, carbon dioxide use, electrical power, electrode area, gas and liquid flow rates, energy efficiency, material cost per test, and the effect of scaling from a single cell to a multi cell stack. It also includes tools for examining carbon balance, equipment durability, component replacement, and changes in performance over time. This is intended to help both academia and industry researchers who are either getting into CO2 electrolysis on lab-scale or are trying to establish a larger footprint. CHEESE presents results through tables, charts, and simplified cell and stack diagrams. It is intended to support research planning, experimental design, comparison of operating conditions, and early stage scale up studies.
Climate warming may accelerate decomposition of Arctic soil carbon, but few controlled experiments have manipulated the entire active layer. To determine surface-atmosphere fluxes of carbon dioxide and methane under anticipated end-of-century warming, we used heating rods to warm soil (by 3.8 °C) to the depth of permafrost in polygonal tundra over two growing seasons at the Barrow Environmental Observatory in Utqiaġvik (formerly Barrow), Alaska. This data product includes supporting data for the companion paper entitled "Large emissions of CO2 and CH4 due to active-layer warming in Arctic tundra", published in Nature Communications by Torn et al. This data package contains seven data files in csv format with corresponding data dictionaries and file-level metadata, describing vegetation biomass dry weight ("Utqiagvik_Vegetation_Biomass_2014.csv"), radiocarbon measurements of respired carbon dioxide ("Utqiagvik_Radiocarbon_2015_2016.csv"), surface-atmosphere fluxes of carbon dioxide and methane and associated soil temperature ("Utqiagvik_Fluxes_Temperature_2015_2016.csv"), and soil temperature measurements averaged every 15-min and 1-hr for 2015 and 2016 ("Utqiagvik_Temperature_15min_2015.csv", "Utqiagvik_Temperature_15min_2016.csv", "Utqiagvik_Temperature_1hr_2015.csv", "Utqiagvik_Temperature_1hr_2016.csv"). There are no specific software requirements to use these data. UIC Science Native Corporation facilitated our scientific research on the Barrow Environmental Observatory, which is Iñupiat land.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).