Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “co2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Analysis of He-N2-CO2-UF6 laser system

Direct nuclear pumping of a CO2 laser system by the U-235(n,ff)FF reaction is examined. Calculations based on a kinetic model which takes into consideration all relevant kinetic processes indicate that dissociation of CO2 prevents the efficient operation of a nuclear pumped CO2 laser system.

Hassan, H. A.↗

The kinetics of the O2/CO2 reaction in molten carbonate - Reaction orders for O2 and CO2 on NiO

The kinetics of the O2/CO2 reaction in molten carbonate is investigated using paste electrolytes and nickel sinter electrodes. A two-step approach to the determination of reaction orders is employed. First, exchange currents at various P(CO2) and P(O2) were measured using the low polarization method. Second, alpha(+) and alpha(-) values were obtained from the slope of the Allen-Hickling plot for current densities low enough so that concentration polarization within the electrode can be neglected. The reaction orders are + 1/4 in CO2 and + 5/8 in O2 in the cathodic direction, and - 3/4 in CO2 and + 1/8 in O2 in the anodic direction.

Winnick, J.↗

Breadboard Solid Amine Water Desorbed CO2 Control System

A regenerable CO2 removal system was developed for potential use on the shuttle as an alternate to the baseline lithium hydroxide (LiOH) system. It uses a solid amine material to adsorb CO2 from the atmosphere. The material is regenerated by heating it with steam from a zero gravity water evaporator. A full sized, thermally representative breadboard canister and a preprototype water evaporator were built and tested to shuttle requirements for CO2 control. The test program was utilized to evaluate and verify the operation and performance of these two primary components of the SAWD system.

Colling, A. K.↗

Influence of CO2 on melting of model granulite facies assemblages - A model for the genesis of charnockites

A model is described for the melting of a simple granulite assemblage, in the presence of CO2-rich fluid phases, which can occur between 750 and 1000 C at crustal pressures and is therefore within the range estimated for such regional metamorphism as that of the Adirondacks. For melting which occurs at about 750 C in the presence of both H2O and CO2, pressures corresponding to the deep crust are required to generate a melt enriched in pyroxene and feldspar components, while melting the precense of pure CO2 at about 1000 C generates analogous melt compositions at lower pressures. These experimental reactions are in keeping with observations constraining charnockite occurrences: (1) pressure and temperature constraints; (2) mineralogical constraints; and (3) constraints on the compositions of volatiles associated with peak conditions of charnockite formation.

Wendlandt, R. F.↗

Climate studies with a multi-layer energy balance model. I - Model description and sensitivity to the solar constant. II - The role of feedback mechanisms in the CO2 problem

A nine-layer zonally averaged, steady-state model, based upon thermal energy balance, is developed for use in climate sensitivity studies and includes an accurate treatment of radiative transfer, parameterized meridional and vertical energy transport, and thermodynamic interaction between the surface and the atmosphere. A high degree of nonlinearity is exhibited by the model in a study of sensitivity to changes in the solar constant. The change in the hemispheric mean surface temperature is +3.1 C in response to a 2% increase in the solar constant and -4.3 C in response to a 2% decrease in the solar constant. The sensitivity varies with latitude, and the response of atmospheric temperature varies with height. In addition, the model is used to study the sensitivity of climate to a doubling of the atmospheric CO2 content. It is found that the tropospheric temperature lapse rate decreases at low latitudes but increases at high latitudes in response to a doubled CO2 content. Averaged over the Northern Hemisphere, the change is +2.3 C in the surface temperature and +0.47 C in the earth's brightness temperature. The effects of some feedback mechanisms on the climate sensitivity to a doubled CO2 content show that the sensitivity of surface temperature approximately doubles at all latitudes due to the change in water vapor content.

Peng, L.↗

A regenerable solid amine CO2 concentrator for space station

A regenerable solid amine CO2 control system, which employs water vapor for desorption, is being developed for potential use on long duration space missions. During cyclic operation, CO2 is first absorbed from the cabin atmosphere onto the granular amine. Steam is then used to heat the solid amine bed and desorb the CO2. This paper describes the solid amine system operation and application to the Shuttle Orbiter, Manned Space Platform (MSP) and Space Operations Center (SOC). The importance and interplay of system performance parameters are presented together with supporting data and design characteristics.

Boehm, A. M.↗

Mode selection and frequency tuning by injection in pulsed TEA-CO2 lasers

An analytical model characterizing pulsed-TEA-CO2-laser injection locking by tunable CW-laser radiation is presented and used to explore the requirements for SLM pulse generation. Photon-density-rate equations describing the laser mechanism are analyzed in terms of the mode competition between photon densities emitted at two frequencies. The expression derived for pulsed dye lasers is extended to homogeneously broadened CO2 lasers, and locking time is defined as a function of laser parameters. The extent to which injected radiation can be detuned from the CO2 line center and continue to produce SLM pulses is investigated experimentally in terms of the analytical framework. The dependence of locking time on the detuning/pressure-broadened-halfwidth ratio is seen as important for spectroscopic applications requiring tuning within the TEA-laser line-gain bandwidth.

Flamant, P. H.↗

Prebiotic synthesis in atmospheres containing CH4, CO, and CO2. I - Amino acids

The prebiotic synthesis of amino acids, HCN, H2CO, and NH3 using a spark discharge on various simulated primitive earth atmospheres at 25 C is investigated. Various mixtures of CH4, CO, CO2, N2, NH3, H2O, and H2 were utilized in different experiments. The yields of amino acids (1.2-4.7 percent based on the carbon) are found to be approximately independent of the H2/CH4 ratio and the presence of NH3, and a wide variety of amino acids are obtained. Glycine is found to be almost the only amino acid produced from CO and CO2 model atmospheres, with the maximum yield being about the same for the three carbon sources at high H2/carbon ratios,whereas CH4 is superior at low H2/carbon ratios. In addition, it is found that the directly synthesized NH3 together with the NH3 obtained from the hydrolysis of HCN, nitriles, and urea could have been a major source of ammonia in the atmosphere and oceans of the primitive earth. It is determined that prebiotic syntheses from HCN and H2CO to give products such as purines and sugars and some amino acids could have occurred in primitive atmospheres containing CO and CO2 provided the H2/CO and H2/CO2 ratios were greater than about 1.0.

Schlesinger, G.↗

Three dimensional global modeling of atmospheric CO2

A model was developed to study the prospects of extracting information on carbon dioxide sources and sinks from observed CO2 variations. The approach uses a three dimensional global transport model, based on winds from a 3-D general circulation model (GCM), to advect CO2 noninteractively, i.e., as a tracer, with specified sources and sinks of CO2 at the surface. The 3-D model employed is identified and biosphere, ocean and fossil fuel sources and sinks are discussed. Some preliminary model results are presented.

Fung, I.↗

A blackbody-pumped CO2-N2 transfer laser

A compact blackbody-pumped CO2-N2 transfer laser was constructed and the significant operating parameters were investigated. Lasing was achieved at 10.6 microns by passing preheated N2 through a 1.5-mm-diameter nozzle to a laser cavity where the N2 was mixed with CO2 and He. An intrinsic efficiency of 0.7 percent was achieved for an oven temperature of 1473 K and N2 oven pressure of 440 torr. The optimum laser cavity consisted of a back mirror with maximum reflectivity and an output mirror with 97.5-percent reflectivity. The optimum gas mixture was 1CO2/.5He/6N2. The variation of laser output was measured as a function of oven temperature, nozzle diameter, N2 oven pressure, He and CO2 partial pressures, nozzle-to-oven separation, laser cell temperature, and output laser mirror reflectivity. With these parameters optimized, outputs approaching 1.4 watts were achieved.

Deyoung, R. J.↗

CO2 on Titan

A sharp stratospheric emission feature at 667/cm in the Voyager infrared spectra of Titan is associated with the nu2 Q branch of CO2. A coupling of photochemical and radiative-transfer theory yields an average mole fraction above the 110 mbar level of (1.5 + 1.5 or - 0.8) x 10 to the -9th, with most of the uncertainty being due to imprecise knowledge of the vertical distribution. CO2 is found to be in a steady state, with its abundance being regulated principally by the 72 K cold trap near the tropopause and secondarily by the rate at which water-bearing meteoritic material enters the top of the atmosphere. An influx of water about 0.4 times that at the top of the terrestrial atmosphere is consistent with a combination of the observed CO2 abundance and a steady-state CO mole fraction of 0.00011; the thoeretical value for CO is close to the value observed by Lutz et al. (1983), although there are large margins for error in both numbers. If steady-state conditions for CO prevail, little information is available regarding the evolution of Titan's atmosphere.

Samuelson, R. E.↗

A radiatively pumped CW CO2 laser

A proof of principle experiment to demonstrate the physics of a radiatively pumped laser has been carried out. For the first time, a blackbody cavity has optically pumped a CW CO2 laser. Results are presented from a series of experiments using mixtures of CO2, He, and Ar in which maximum output power was obtained with a 20 percent CO2-15 percent He-65 percent Ar mixture. The dependence of the output power on the blackbody temperature and the cooling gas flow rate is also discussed. By appropriately varying these parameters, continuous output powers of 8-10 mW have been achieved.

Insuik, R. J.↗

The problem of the Earth's CO2 content and the iron core

The near absence of metallic iron and the presence of magnetite and FeS in the C-1 chondrites imply that metallic iron was a minor phase present during the accretion process that formed the C-1 chondrites. If the C-1 chondrites provided the bulk of the initial planetary growth materials, the carbon reduction model is favored. The above estimates suggest that some 1240 to 227 times as much CO2 may have been produced during the formation of the core than can be accounted for in the crust and mantle. This discrepancy taken to the extreme suggests either that: (1) the Earth has lost more than 99 percent of its initial CO2 during early differentiation (this is highly unlikely) or: (2) the Earth has acquired some 90 percent of its present mass by the accretion of debris from previously reduced and differentiated but subsequently disrupted planetary bodies whereby the associated CO2 would not be captured, or: (3) the C-1 chondrites represent only a trivial fraction of the initial accretion materials present in the nebular cloud or: (4) condensed iron and anhydrous silicate phases were preferentially accreted during the initial formation of the planetary bodies.

Devore, G. W.↗

Effects of high CO2 levels on surface temperature and atmospheric oxidation state of the early earth

One-dimensional radiative and photochemical models are used to determine how much CO2 must have been present to maintain a temperate early climate and to examine the consequences that are implied for the controls on atmospheric oxidation state. It is shown that CO2 concentrations of the order of 1000 PAL are required to keep the average surface temperature close to the present value, if albedo changes and heating by reduced greenhouse gases were relatively unimportant. The oxidation state of such a high-CO2, prebiotic atmosphere should have been largely determined by the balance between the H2O2 rainout rate and the rate at which hydrogen escaped to space, with only a weak dependence on the volcanic outgassing rate or on other speculative sources of H2. The implied upper limit on the ground-level O2 mixing ratio is approximately 10 to the -11th and is subject to less uncertainty than the results of previous models.

Kasting, J. F.↗

Evaluation of catalyst for closed cycle operation of high energy pulsed CO2 lasers

Several catalyst materials have been tested for efficiency of converting CO and O2 to CO2 for use in a high energy CO2 laser. The composition of the gas mixtures was monitored by mass spectrometry and gas chromatography. A copper/copper oxide catalyst and a platinum/tin oxide catalyst were used for closed cycle operation of a CO2 laser (0.7 joules/pulse), operating at 10 pulses/sec.

Rogowski, R. S.↗

Approaches to the utilization of space for CO2 research

A system study of the potential of space technology to monitor climate changes and improve the understanding of the coupling beteen CO2 and cloud cover is summarized. The basis for the study is scientific data requirements pertinent to the U.S. Department of Energy's CO2 Research Program. The capabilities of space-based sensor systems are matched to meet these requirements. New sensor system concepts are identified, including a Space Shuttle-launched recalibration package to provide for continuity of measurement and recalibration between satellites, a high-orbit radiation budget satellite, or parallax sensor to measure cloud altitude, a passive method for the direct measurements of CO2 and a high-altitude powered platform to monitor select regional parameters. Space-based sensor systems that could be the development focus for the time frames of 0-5, 5-10 and 10-20 years are recommended.

Glaser, P.↗

The Martian hydrologic cycle - Effects of CO2 mass flux on global water distribution

The Martian CO2 cycle, which includes the seasonal condensation and subsequent sublimation of up to 30 percent of the planet's atmosphere, produces meridional winds due to the consequent mass flux of CO2. These winds currently display strong seasonal and hemispheric asymmetries due to the large asymmetries in the distribution of insolation on Mars. It is proposed that asymmetric meridional advection of water vapor on the planet due to these CO2 condensation winds is capable of explaining the observed dessication of Mars' south polar region at the current time. A simple model for water vapor transport is used to verify this hypothesis and to speculate on the effects of changes in orbital parameters on the seasonal water cycle.

James, P. B.↗

Catalytic Oxidation of CO for Closed-Cycle CO2 Lasers

Stoichiometric mixture converted completely. High-energy pulsed CO2 lasers have potential for measuring many different features of atmosphere of Earth and particularly useful on airborne or space platforms. For this application, laser must be operated in closed cycle to conserve gas, especially if rare nonradioactive isotopes of carbon and oxygen used. However, laser discharge decomposes fraction of CO2 to CO and O2, causing rapid loss in power leading to erratic behavior. To maintain operation, CO and O2 must be recombined to form CO2.

Miller, I. M.↗