Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cascade”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Experimental studies on the influence of the degree of turbulence and of a turbulence thread on the compressible subsonic flow through flat compressor cascades

The measurements revealed that at low Reynolds numbers the profile loss is considerably reduced both by the increased degree of turbulence and by a turbulence thread, while it is somewhat increased at high Reynolds numbers, and that a profile loss reduction is connected with an increase in deflection and in pressure shift. The turbulence generator is most effective on the one hand in the middle of the operating range of the cascades, and on the other at very high Mach numbers together with a large angle of incidence.

Barsun, K.↗
NASA NTRS1977

Supercritical cascade design

The use of the method of complex extension to achieve better aerodynamic designs for supercritical cascades applicable to transonic turbomachinery is discussed. The method permits the computation of analytical solutions to elliptic, hyperbolic or mixed second-order partial equations in two dimensions. Boundary value problems formulated to develop an airfoil shape having a prescribed speed distribution for subsonic flow and a nearby speed distribution in the transonic case are also considered. Computing times necessary to run the blade design program are described as acceptably short.

Korn, D. G.↗
NASA NTRS1979

A review of Air Force high efficiency cascaded multiple bandgap solar cell research and development

At the time of their conception, the cell stack systems to be discussed represent the best semiconductor materials combinations to achieve Air Force program goals. These systems are investigated thoroughly and the most promising systems, from the standpoint of high efficiency, are taken for further development with large area emphasized (at least 4 sq cm). The emphasis in the Air Force cascaded cell program is placed on eventual nonconcentrator application. This use of the final cell design considerably relieves the low resistance requirements for the tunnel junction. In a high concentration application the voltage drop across the tunnel junction can be a very serious problem.

Rahilly, W. P.↗
NASA NTRS1979

Computer modeling of a two-junction, monolithic cascade solar cell

The theory and design criteria for monolithic, two-junction cascade solar cells are described. The departure from the conventional solar cell analytical method and the reasons for using the integral form of the continuity equations are briefly discussed. The results of design optimization are presented. The energy conversion efficiency that is predicted for the optimized structure is greater than 30% at 300 K, AMO and one sun. The analytical method predicts device performance characteristics as a function of temperature. The range is restricted to 300 to 600 K. While the analysis is capable of determining most of the physical processes occurring in each of the individual layers, only the more significant device performance characteristics are presented.

Lamorte, M. F.↗
NASA NTRS1978

Rocket effluent size distributions made with a cascade quartz crystal microbalance

Airborne particulate size distribution measurements were made in the stabilized ground cloud from a Titan III C rocket just after launch from the Kennedy Space Center on May 12, 1977. The measurements were made from aboard a small twin engine aircraft instrumented with particle and gas sensors. The plume was followed for about 1 hour while making multiple passes through the cloud at varying altitudes. The results obtained with a ten-stage cascade quartz crystal microbalance impactor show that the mass concentration as a function of particle diameter is bimodal with the first maximum between 0.05 micrometers and 0.1 micrometers and the second maximum between 0.8 and 1.0 micrometer. Scanning electron microscope analysis were performed on the material collected and show distinctly different kinds of particles in the two modes.

Woods, D. C.↗
NASA NTRS1978

Unsteady flow in a supersonic cascade with subsonic leading-edge locus

Linearized theory is used to predict the unsteady flow in a supersonic cascade with subsonic axial flow velocity. A closed-form analytical solution is obtained by using a double application of the Wiener-Hopf technique. Although numerical and semianalytical solutions of this problem have already appeared in the literature, this paper contains the first completely analytical solution. It has been stated in the literature that the blade source should vanish at the infinite duct resonance condition. The present analysis shows that this does not occur. This apparent discrepancy is explained in the paper.

Adamczyk, J. J.↗
NASA NTRS1979

Particle acceleration in solar flares by cyclotron damping of cascading turbulence

It is pointed out that cyclotron damping of cascading turbulence can be a very efficient acceleration process because the turbulence is generally damped by the suprathermal tail of the particle distribution. Using a simplified approach to the transfer of wave energy down the spectrum, analytic time-dependent solutions are derived which describe the growth of the tail and its effect back on the turbulence. They suggest that with this mechanism, a sizable fraction of all the available energy ends up in a very small minority of the particles at the flare site, in accord with observations. Preferential acceleration of heavy elements is generally expected. The enhancement mechanism is very sensitive; and if He-3 is preaccelerated by even a modest amount, it could be enhanced by many orders of magnitude, as observed in some flares.

Eichler, D.↗
NASA NTRS1979

Low-turbulence high-speed wind tunnel for the determination of cascade shock losses

A low turbulence high-speed wind tunnel, using anti-turbulence screening and a 100:1 contraction ratio, has been found suitable for high-speed smoke flow visualization. The location and strength of normal, oblique, and curved shock waves generated by transonic or supersonic wind tunnel flow over airfoils or through axial compressor cascades is determined by combined shadowgraph and smokelines visualization techniques without the interference effects caused by intrusive probes. The Reynolds number based on chord varied between 50,000 and 1,000,000. Preliminary results are compared with the relevant theory and data gathered using a total pressure probe.

Slovisky, J. A.↗
NASA NTRS1981

Dynamics of cavitating cascades and inducer pumps

Report chronicles advances in understanding and predicting unsteady dynamic characteristics of cavitating cascades and inducer pumps. It includes bibliography of 19 papers authored between 1972 and 1980.

Brennen, C. E.↗
NASA NTRS1979

Streakline flow visualization study of a horseshoe vortex in a large-scale, two-dimensional turbine stator cascade

Neutrally bouyant helium-filled bubbles were observed as they followed the streamlines in a horseshoe vortex system around the vane leading edge in a large scale, two dimensional, turbine stator cascade. Inlet Reynolds number, based on true chord, ranged between 100,000 to 300,000. Bubbles were introduced into the endwall boundary layer through a slot upstream of the vane leading edge. The paths of the bubbles were recorded photographically as streaklines on 16 mm movie film. Individual frames from the film were selected, and overlayed to show the details of the horseshoe vortex around the leading edge. The transport of the vortex across the passage near the leading edge is clearly seen when compared to the streaks formed by bubbles carried in the main stream. Limiting streamlines on the endwall surface were traced by the flow of oil drops.

Gaugler, R. E.↗
NASA NTRS1980

Streakline flow visualization study of a horseshoe vortex in a large-scale, two-dimensional turbine stator cascade

Neutrally buoyant helium-filled bubbles were observed as they followed the streamlines in a horseshoe vortex system around the vane leading edge in a large-scale, two-dimensional, turbine stator cascade. Bubbles were introduced into the endwall boundary layer through a slot upstream of the vane leading edge. The paths of the bubbles were recorded photographically as streaklines on 16-mm movie film. Individual frames from the film have been selected, and overlayed to show the details of the horseshoe vortex around the leading edge. The transport of the vortex across the passage near the leading edge is clearly seen when compared to the streaks formed by bubbles carried in the main stream. Limiting streamlines on the endwall surface were traced by the flow of oil drops.

Gaugler, R. E.↗
NASA NTRS1981

Solution of plane cascade flow using improved surface singularity methods

A solution method was developed for calculating compressible inviscid flow through a linear cascade of arbitrary blade shapes. The method uses advanced surface singularity formulations which were adapted from those in current external flow analyses. The resulting solution technique provides a fast flexible calculation for flows through turbomachinery blade rows. The solution method and some examples of the method's capabilities are presented.

Mcfarland, E. R.↗
NASA NTRS1981

Effects of mistuning on bending-torsion flutter and response of a cascade in incompressible flow

The effect of small differences between the individual blades (mistuning) on the aeroelastic stability and response of a cascade were studied. The aerodynamic, inertial, and structural coupling between the bending and torsional motions of each blade and the aerodynamic coupling between the blades was considered. A digital computer program was developed to conduct parametric studies. Results indicate that the mistuning has a beneficial effect on the coupled bending torsion and uncoupled torsion flutter. On forced response, however, the effect may be either beneficial or adverse, depending on the engine order of the forcing function. The results also illustrate that it may be feasible to utilize mistuning as a passive control to increase flutter speed while maintaining forced response at an acceptable level.

Kaza, K. R. V.↗
NASA NTRS1980

Results of the Air Force high efficiency cascaded multiple bandgap solar cell programs

The III-V semiconductor materials system that was selected for continued cascade cell development was the AlGaAs cell on GaAs cell structure. The tunnel junction used as transparent ohmic contact between the top cell and the bottom cell continued to be the central difficulty in achieving the program objective of 25 percent AMO efficiency at 25 C. During the tunnel junction and top cell developments it became apparent that the AlGaAs cell has potential for independent development as a single junction converter and is a logical extension of the present GaAs heteroface technology.

Rahilly, W. P.↗
NASA NTRS1980

AlGaAs-GaAs cascade solar cell

Computer modeling studies are reported for a monolithic, two junction, cascade solar cell using the AlGaAs GaAs materials combination. An optimum design was obtained through a serial optimization procedure by which conversion efficiency is maximized for operation at 300 K, AM 0, and unity solar concentration. Under these conditions the upper limit on efficiency was shown to be in excess of 29 percent, provided surface recombination velocity did not exceed 10,000 cm/sec.

Lamorte, M. F.↗
NASA NTRS1980

Dynamics of cavitating cascades

The unsteady dynamics of cavitating cascades and inducer pumps were studied with a view to understanding (and possibly predicting) the dynamic characteristics of these devices. The chronology of the research is summarized as well as the final conculsions for each task. The construction of a dynamic pump test facility and its use in making experimental measurements of the transfer function is described as well as tests conducted using a scale model of the low pressure liquid oxygen turbopump inducer in the shuttle main engine. Auto-oscillation and unsteady inlet flow characteristics are discussed in addition to blade cavity influence and bubbly cavitation.

Brennen, C. E.↗
NASA NTRS1981

Finite element analysis of transonic flows in cascades: Importance of computational grids in improving accuracy and convergence

The finite element method is applied for the solution of transonic potential flows through a cascade of airfoils. Convergence characteristics of the solution scheme are discussed. Accuracy of the numerical solutions is investigated for various flow regions in the transonic flow configuration. The design of an efficient finite element computational grid is discussed for improving accuracy and convergence.

Ecer, A.↗
NASA NTRS1981

Analysis of turbulent boundary layer on cascade and rotor blades of turbomachinery

The momentum integral technique for predicting the boundary layer growth in three-dimensional flow has been extended to include the entrainment equation as the closure model. The numerical solution is compared with the cascade, inducer, compressor, and fan rotor blade data from various sources. The agreement is found to be excellent in all cases, with the exception of the separated flow. Both the momentum thickness and the limiting streamline angle predicted from this analysis compare well with the measured data for a rotor blade. The technique is extremely useful in engineering design, analysis, and performance prediction.

Lakshminarayana, B.↗