Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “calcium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Layered Transition Metal Oxides as Ca Intercalation Cathodes: A Systematic First-Principles Evaluation

Finding high-voltage Ca cathode materials is a critical step to unleashing the full potential of high-energy-density Ca-ion batteries. Therefore, first-principles calculations are used to demonstrate that P-type layered calcium transition metal (TM) oxide materials (CaTM 2 O 4 ) with a range of TM substitutions (TM = Ti, V, Cr, Mn, Fe, Co, and Ni) have excellent battery-related properties including thermodynamic stability, average voltage, energy density, synthesizability, ionic mobility, and electronic structure. However, the thermodynamic stability of the charged phase and TM redox activity are shown to be sensitive to TM selection, with CaCo 2 O 4 having the best balance of all considered properties. The utility of combining multiple TMs to expand the chemical search space for TM substitutions is demonstrated by mixing Co and Ni in layered CaTM 2 O 4 .

25 ENERGY STORAGE↗
DOE OSTI2023

Carbonation dynamics of hydrated alite revealed by electron microscopy

CO 2 sequestration in concrete is crucial to relieve the environmental burden, while the carbonation mechanisms remain unclear. Here, we explored the carbonation dynamics of alite hydrates through electron microscopy. We discovered that calcite is the main phase of carbonate crystals throughout the entire carbonation period in the alite system. Further, the shape evolution of calcite crystals was captured: spindle carbonates initially formed on C-S-H substrate and then transformed into rhombohedrons; Intermediate states such as polyhedral particles and layered rhomboids were also observed. Based on our quantitative calculations, the growth rate of calcite particles was determined approximately 0.2 μm/day, which may be affected by the relative concentration between calcium ions and CO 2 source. A direct relation between the microstructure and mechanical properties of calcite was uncovered using atomic force microscopy. Furthermore, we found that the morphology development of calcite crystals during carbonation may be explained by the surface energy variation of different facets. This work suggests a unique approach to track carbonation kinetics and provides new opportunities to unveil underlying carbonation mechanisms at the nanoscale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Piezoelectric response and failure behavior of cement paste under external loading

We study the elastic behavior and rupture mechanism of Calcium Silicate Hydrates (C-S-H) in response to tensile loading. For the three tensile axes, initial defects are spotted in the interlayer regions. However, the crack propagation is rather different depending on the axis of tensile. The cup-and-cone failure surface shows the ductile feature of C-S-H in the x and y directions; while the devastating rupture mode confirms the brittle feature of C-S-H in the z direction. Piezoelectricity was investigated using the charge fluctuation method. The polarization variation in response to small strain was also investigated and piezoelectric coefficients were derived. Furthermore, dependence of elastic and piezoelectric properties over external pressure was analyzed. Results reveal an improvement of the mechanical properties and the ultimate strength especially in the z direction; whereas the non-piezoelectricity remains unchanged despite the rearrangement of atoms induced by the external applied pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Cs retention and diffusion in C-S-H at different Ca/Si ratio

Cement and concrete are commonly used in the construction of repository sites for radioactive wastes. The correct isolation of those contaminants requires good adsorption and low diffusion rates. Both parameters are highly affected by many factors, such as pH, temperature or composition. The large variability of experimental conditions and formulations makes it extraordinarily difficult to tackle the influence of each of them independently in experimental samples. To this effect, molecular dynamics simulations have been employed in this study to investigate the role of the composition in the capacity to retain Cs and diffusivity of these ions in calcium silicate hydrate (C-S-H) gel pores. The results indicate that the adsorption of Cs ions is worsened at high Ca/Si ratios due to a lower interaction of the cations with the C-S-H surface, while hydrophilicity of the C-S-H nanopore rises, resulting in higher long-range ordering and lower diffusion coefficients of Cs ions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Belite cements and their activation

Belite cements, BCs, containing mainly belite, alite and calcium aluminates, are currently used as low heat cements. These binders produce high amounts of C–S–H gel and have very good durability properties which are reviewed. Additional advantages include: (i) lower limestone demand, with lower associated CO{sub 2} emissions; (ii) lower energy demand; (iii) lower kiln operating temperature, which means lowering CO{sub 2} and NO{sub x} emissions from fuel burning; and (iv) lower temperature increase at early hydration age. However, early-age strength developments are not competitive with those of Portland cements. Hence, to improve their early-age strength developments is a research priority known as activation. This enhancement can be attained by three compatible approaches: (i) chemical, (ii) physical; and (iii) admixture activations. The current research status for BCs activation is reviewed including: cost-effective element substitutions to stabilize high-temperature forms; fast cooling, milling and mild temperature hydration as physical activation; and the use of C–S–H seeds as admixture activation. After discussion of the resulting microstructures, a research outlook is exercised.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Chemical degradation of fly ash blended concrete with the seasonal variation of rainwater in a radioactive waste repository: A thermodynamic modeling approach

Highlights: • The thermodynamic model for the cementitious system was successfully developed. • The chemical degradation of concrete was greatly affected by rainwater types. • Inorganic carbon species in rainwater reduced the chemical resistance of concrete. • The durability of concrete to rainwater decreased with increasing fly ash content. This study presents a long-term degradation behavior of fly ash blended concrete in a vault type low- and intermediate-level radioactive waste (LILW) repository by thermodynamic equilibrium calculations using PHREEQC combined with CEMDATA18 database. Since rainwater plays a predominant role as leachate for the concrete waste container in the repository, the effect of chemical properties of seasonal rainwater on the chemical degradation of concrete was analyzed. In addition, the impact of the blending with fly ash on the chemical degradation was evaluated through a gradual replacement of ordinary Portland cement (OPC) by fly ash. Regardless of the replacement level, autumn rainwater showed the greatest influence on the concrete degradation owing to the presence of inorganic carbon species, which induce the carbonation. The resistance of concrete to chemical degradation by rainwater was persistently reduced due to the decreasing formation of portlandite and calcium silicate hydrate (C-S-H) with increasing replacement level.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Hinderance of C-S-H sheet piling during first drying using a shrinkage reducing agent: A SAXS study

The role of a shrinkage reducing agent (SRA) in the hardened cement paste during a first desorption process was investigated by measuring the small-angle X-ray scattering (SAXS). Fractal disc analysis and Guinier approximation were adopted to interpret the SAXS profiles. We experimentally confirmed that the presence of SRA molecules mitigated the piling of calcium-silicate hydrate (C-S-H) sheets, which could be monitored by the increase in the thickness of the disc, representing the agglomeration of C-S-H sheets. In addition, the basal spacing of C-S-H did not change during the drying. By contrast, the diameter of the discs monotonically decreased and showed a similar trend to that of samples lacking SRA. Based on these findings, we concluded that SRA molecules were on the surface of the C-S-H sheets and mitigated the piling, facilitating water removal from the C-S-H agglomeration in the RH range of 80–40%.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The effect of equilibration time on Al uptake in C-S-H

Calcium silicate hydrate (C-S-H) is the main hydration product of Portland cements. The partial replacement of Portland cements by supplementary cementitious materials can result in C-S-H with lower Ca/Si ratios and more aluminum and alkalis. The effect of equilibration time on Al uptake in C-S-H was investigated using equilibration times from 7 days up to 3 years. Lower Al concentrations were measured in the solution after longer equilibration times. In addition, a higher uptake of Al in C-S-H was observed based on the decrease in the content of secondary phases. Little further decrease in Al concentrations was observed after 2 years and longer at low Ca/Si. At high Ca/Si no significant change in solution concentrations was observed after more than 3 month, while the destabilization of secondary phases continued up to 1 year, indicating that a (meta)stable equilibrium was reached faster at higher Ca/Si ratios.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Multi-scale investigation on mechanical behavior and microstructural alteration of C-S-H in carbonated Alite paste

Carbonation treatment is a promising option to enhance recycled concrete aggregate (RCA) quality and eventually improve concrete performance. This study investigated the multi-scale mechanical properties of calcium silicate hydrates (C-S-H) in a mature alite paste subjected to accelerated carbonation treatment by testing macro compressive strength, microhardness and nanoindentation. The results show that, carbonation treatment resulted in a heterogeneous distribution of carbonation products in the alite sample. Reinforcement of C-S-H by the randomly precipitated calcite and vaterite crystals prevailed over the nano-structural and compositional alteration of C-S-H induced by carbonation, leading to an increase of nano-indentation modulus at the edge of the sample. Also, the microhardness at the edge zone was markedly higher than that at the core of the carbonated sample. The carbonated peripheral zone with improved nano-scale modulus and microhardness was likely serving as a “hard shell”, contributing to the improved macro compressive strength. The new insights into the multi-scale mechanical properties of carbonated C-S-H contribute to further understanding of the enhanced properties of RCA after carbonation treatment.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Sorption and electrokinetic properties of ASR product and C-S-H: A comparative modelling study

Alkali-silica reaction (ASR) is one of the most important concrete durability issues worldwide. ASR products formed at high temperature have a structure similar to the natural mineral shlykovite. Reactive Grand Canonical Simulations were used to investigate sorption of K{sup +}, Cl{sup −} and Ca{sup 2+} on C-S-H and ASR products at different pH (10.0 to 13.0) and pore water chemistry. Divalent ions can overcompensate for the negative surface charge, in particular for C-S-H, which leads to a co-adsorption of negative species such as Cl{sup −}. At high K/Ca in solution, monovalent K{sup +} can desorb calcium from C-S-H and shlykovite surface. The calculated Ca/K partition coefficient shows a higher affinity of ASR product for K{sup +}, while C-S-H favours Ca{sup 2+}. The uptake of K{sup +} by ASR products lowers the alkali concentration in the solution and could thus slow down the rate of ASR.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Amino acids as performance-controlling additives in carbonation-activated cementitious materials

This article presents an investigation on the application of amino acids to control the CaCO{sub 3} crystallization in carbonation cured wollastonite composites. It was observed that wollastonite carbonated without any amino acid formed calcite as the primary polymorph of CaCO{sub 3}. In contrast, the use of amino acids as admixtures resulted in the formation of stable amorphous calcium carbonate (ACC), vaterite, and aragonite during the carbonation of wollastonite. The carbonated composites produced with amino acids were observed to have a lower critical pore size, but a higher total porosity, compared to the control batch. Additionally, the utilization of amino acids was observed to increase the flexural strength and compressive strength of the composites up to 106% and 48%, respectively, compared to the control batch. Such performance enhancement of the carbonated composites in the presence of amino acids was attributed to the reduced critical pore size and the formation of organic-inorganic hybrid phases in the matrix.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Physical-chemical-mechanical quantitative assessment of the microstructural evolution in Portland-limestone cement pastes exposed to magnesium sulfate attack at low temperature

The changes in structural integrity and microstructure of Portland-limestone cement pastes were investigated in the course of magnesium sulfate attack at low temperature. A deterioration front, consisting of three distinct layers (brucite, gypsum, leached cement matrix), swelled in time due to the expansive nature of the deterioration products, generating cracks and subsequently detaching from the sound cement matrix, continuously promoting the process. Gypsum and thaumasite characterized the leached matrix, which experienced extensive cross-linking of the aluminosilicate structures, as a result of decalcification and dealumination of the calcium silicate hydrates (C(A)SH), impairing the overall mechanical performance. CSH of low packing density was most severely affected by the process, as confirmed by the significant drop in nano-mechanical properties. The increased rate of deterioration with limestone content was tentatively attributed to the prevalent morphology of the CSH phase. Results were validated by thermodynamic simulations, indicating that the real systems did not reach equilibrium.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Factors affecting the reactivity of slag at early and late ages

This study investigates the difference between the reactivity of slag in NaOH solution (w/s = 100) and in cement paste (w/b = 0.4). The reactivity of slag is much higher in NaOH solution than in cement paste. When the NaOH solution is saturated with portlandite, the rate of reaction of slag decreases to approach that in cement paste. This suggests that the slower reaction of slag in cement paste might be due to the presence of calcium ions released by the clinker phases. At 28 days, relative humidity measurements indicate that water is only present in pores less than 6 nm. Above 6 nm, hydration cannot take place due to the lack of water. From a thermodynamic point of view, the small size of water filled pores may slow down the slag reaction due to the high concentration of species in solution required for hydrate growth to balance the increase of the surface energy.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Time-dependent water vapor desorption isotherm model of hardened cement paste

Highlights: • Short-term and long-term desorption isotherms of hardened cement paste are reviewed. • Water content at RH depends on both thermodynamic and microstructural equilibria. • An extended GAB equation is proposed to fit the cavitation drop during desorption. • A dynamic time-dependent sorption isotherm model is shown and used for simulations. • Numerical results capture anomalous drying in the same RH as seen experimentally. This study aims to enhance moisture transport modeling by elucidating the so-called anomalous water diffusion in cementitious materials. Water desorption isotherms are measured from samples at various drying stages using techniques with different durations to quantify the impact of the drying duration on the water sorption ability. A single water sorption isotherm does not solely give a relationship between the water content and relative humidity but also represents the state of microstructure. The continuous evolution of a desorption isotherm due to drying-induced microstructural rearrangement is demonstrated. For numerical modeling, the microstructural alteration can be explicitly considered through a dynamic desorption isotherm model, which governs the local thermodynamic equilibrium at the capillary meniscus. This approach is implemented into a multiphase transport code, whose ability to predict drying is validated using literature data. Finally, the effect of prolonged drying on the colloidal nature of the calcium-silicate-hydrate gel is discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Application of electrodialysis pretreatment to enhance boron removal and reduce fouling during desalination by nanofiltration/reverse osmosis

we report membranes have emerged as promising technologies for treatment of non-traditional waters, but fouling and poor rejection of small, neutral solutes (e.g., boric acid) impede their further implementation for water purification. Boron rejection is increased by raising the pH to convert boric acid to borate ion, but this change often leads to calcite supersaturation. This study investigated the use of a hybrid electrodialysis-nanofiltration/reverse osmosis (ED-NF/RO) system to reduce fouling from calcite precipitation and calcium-polysaccharide sorption to NF/RO membranes. Also, the study examined the potential of the hybrid process to increase permeate flux and boron rejection during NF/RO of synthetic saline water. ED pretreatment reduced calcite oversaturation and reduced flux decline during NF/RO. Low alginate concentrations (25 mg/L) limited NF/RO fouling, but high concentrations (100 mg/L) appeared to promote calcite scaling. ED pretreatment reduced the osmotic pressure of the NF/RO feed water, enabling lower operating pressures or greater permeate water fluxes. Boron rejection during NF/RO increased with ED pretreatment, probably due to stronger electrostatic repulsion and an increase in the fraction of total boron present as B(OH)4- following ED. This hybrid ED-NF/RO system shows promise as a novel approach to enhancing the performance of current membrane systems for treating complex feed waters.

alginate↗
DOE OSTI2020

Selective sulfur removal from semi-dry flue gas desulfurization coal fly ash for concrete and carbon dioxide capture applications

High-sulfur mixed fly ash residues from semi-dry flue gas desulfurization units in coal-fired power plants are unsuitable for use as supplementary cementitious material (SCM) for concrete production or carbon dioxide utilization. In this work, we explore the potential for upcycling a representative spray dry absorber ash (10.44 wt% SO 3 ) into concrete-SCM by selective sulfur removal via weak acid dissolution while simultaneously exploring the possibility for CO 2 capture. Towards this effort, parametric studies varying liquid-to-solid ratio, acidity, and CO 2 pressure were conducted in a batch reactor to establish the sulfur removal characteristics in de-ionized water, nitric acid, and carbonic acid, respectively. The dissolution studies show that the leaching of sulfur from calcium sulfite hemihydrate, which is the predominant S phase, is rapid and achieves a concentration plateau within 5 min, and subsequently, appears to be controlled by the primary mineral solubility. Here, preferential S removal was sufficient to meet SCM standards (e.g., 5.0 wt% as per ASTM C618) using all three washing solutions with 0.62–0.72 selectivity (S^), defined as the molar ratio of S to Ca in the leachate, for a raw fly ash with bulk S^ = 0.3. Acid dissolution with 1.43 meq/g of ash or under 5 atm CO 2 retained > 18 wt% CaO and other Si-, Al-rich phases in the fly ash. Based on the experimental findings, two sulfur removal schemes were suggested for either integration with CO 2 capture and utilization processes using flue gas or to produce fly ash for use as a SCM.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

Bassanite Grows Along Distinct Coexisting Pathways and Provides a Low Energy Interface for Gypsum Nucleation

Calcium sulfate is a naturally abundant and industrially important mineral; understanding its formation mechanism contributes to reconstructing geochemical record and controlling its scaling in industry. Formation of gypsum is shown to follow a multistage-processes via bassanite, but the evolution of bassanite and the mechanism by which it is replaced by gypsum are poorly understood. Here we outline a three-stage process: (i) growth of bassanite nanoparticles into nanorods or rosettes, (ii) extension of bassanite rosettes by addition of fundamental growth units and aggregation of bassanite nanorods into aggregates, and (iii) heterogeneous nucleation of gypsum on the tips of bassanite rosettes and aggregates. The findings demonstrate that bassanite grows via distinct coexisting pathways and provides a low energy interface for heterogeneous nucleation of gypsum, thus providing proofs that more than one growth pathway can operate simultaneously in a crystallization system and that the precursors in multistage crystallization processes can imprint their pattern of precipitation onto the final phase.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Mineral Scaling in 3D Interfacial Solar Evaporators–A Challenge for Brine Treatment and Lithium Recovery

In this work, we analyzed the effects of mineral scaling on the performance of a 3D interfacial solar evaporator, with a focus on the cations relevant to lithium recovery from brackish water. The field has been rapidly moving toward resource recovery applications from brines with higher cation concentrations. However, the potential complications caused by common minerals in these brines other than NaCl have been largely overlooked. Therefore, in this study, we thoroughly examined the effects of two common cations (calcium and magnesium) on the long-term solar evaporation performance of a 3D graphene oxide stalk. The 3D stalk can achieve an evaporation flux as high as 17.8 kg m –2 h –1 under one-sun illumination, and accumulation of NaCl on the stalk surface has no impact. However, the presence of CaCl 2 and MgCl 2 significantly reduces the evaporative flux even in solutions lacking scale-forming anions. A close examination of scale formation during long-term evaporation experiments revealed that CaCl 2 and MgCl 2 tend to precipitate out within the stalk, thus blocking water transport through the stalk and significantly dropping the evaporation rates. These findings imply that research attention is needed to modify and optimize the internal water transport channels for 3D evaporators. Additionally, we emphasize the importance of testing realistic mixtures–including prominent divalent cations– and testing long-term operations in interfacial solar evaporation research and investigating approaches to mitigate the negative impacts of divalent cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗