Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “biomass program”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Expansion and photosynthetic rate of leaves of soybean plants during onset of and recovery from nitrogen stress

This study reports on the effects of nitrogen stress and restoration of nitrogen availability after a period of stress on expansion and photosynthetic rate of soybean leaves of differing maturity. We hypothesized that nitrogen resupply would lead to additional accumulation of reduced nitrogen in the leaves and, ultimately, resumption of leaf initiation and expansion and photosynthetic activity. In continuously nitrogen-stressed plants, expansion of middle trifoliolates of main-stem trifoliates and leaf area at full expansion were severely restricted. Leaves showing the greatest effects were initiated after removal of nitrogen. When the reduced nitrogen concentration in mature leaves of continuously stressed plants fell below 9 mg dm-2, the photosynthetic rate per unit leaf decreased rapidly, reaching a minimum of ca. 6-8 mg dm-2 h-1. The older mature leaves tended to abscise at this point, while the youngest leaves remained on the plant and continued to photosynthesize slowly. When nitrogen was resupplied, leaf expansion and final leaf area increased. Leaf initiation was also stimulated as reduced nitrogen levels rose in the leaves. Photosynthetic rates of the oldest and youngest pair of mature leaves returned to values comparable to those of similar-aged leaves of nonstressed soybean plants.

NASA Discipline Number 61-10↗

Temperature and photoperiod responses of soybean embryos cultured in vitro

Temperature and photoperiod each have direct effects on growth rate of excised embryos of soybean (Glycine max (L.) Merrill). To determine if the effects of photoperiod are altered by temperature, embryos of 'Ransom II' were cultured in vitro at 18, 24, and 30 degrees C under photoperiod durations of 12 and 18 h at an irradiance of 9 W m-2 (700 to 850 nm) and a photosynthetic photon flux density of 58 micromoles m-2 s-1 (400 to 700 nm). Accumulation rates of fresh and dry weight were greater under 18-h than 12-h photoperiods over the entire range of temperature. Water content of the culture embryos was not affected by photoperiod but was greater at 18 and 30 than 24 degrees C. The accumulation rate of dry weight increased from 18 to 26 but declined at 30 degrees C.

NASA Program CELSS↗

Manufacture of Acrylic Acid from Biomass Derived Intermediates

Statement of Problem Acrylic acid is a global commodity chemical used in acrylic paints, coatings, adhesives, detergents, and hygienic products. The current method to manufacture acrylic acid is a complex, energy intensive process, based on hydrocarbon feedstocks. This proposal will provide a novel selective catalytic reactive distillation technology for the manufacture of acrylic acid from biomass. This proposal will provide technology for producing acrylic acid from crude glycerol, a byproduct of biodiesel manufacture. Crude glycerol is currently in substantial over-supply in the market place, is economically burdensome to biodiesel producers, and is available at extremely low cost. The acrylic acid product of this proposed program is identical to that now derived from petroleum sources, and is a direct substitute in the market. The Solution The overall goal of this Small Business Innovation Research project is to commercialize an innovative, integrated catalytic reactive distillation/oxidation technology to convert crude glycerol into acrylic acid, for use in paints, coatings and adhesives. The Phase I project established the technical and economic feasibility of the innovative technology, based on novel catalyst compositions, to manufacture acrylic acid from the crude glycerol byproduct resulting from biodiesel manufacture. Application of the proposed technology will achieve a biobased route to acrylic acid manufacture, while offsetting biodiesel production costs by increasing the value of the crude glycerol byproduct credits, by (1) the use of process intensification techniques, specifically catalytic reactive distillation, to remove acrolein as it is generated by the reaction, thereby suppressing degradation reactions; (2) the development of novel catalysts, specifically designed for use in a catalytic reactive distillation environment, for the dehydration of glycerol with very high selectivity; and (3) the demonstration of the catalytic oxidation of the acrolein to acrylic acid at exceptionally high yield. Commercial Applications and Other Benefits: The use of the integrated catalytic reactive distillation/oxidation technology should find immediate application for the production of acrylic acid from inexpensive crude glycerol byproduct of biodiesel production, thereby supporting the growth of biorefineries, and improving long term U.S. employment and competitiveness in global markets. The novel technology is potentially applicable to production of other products from renewable biomass based resources.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Virtual Special Issue on Catalysis at the U.S. Department of Energy’s National Laboratories

Catalysis research at the U.S. Department of Energy's (DOE's) National Laboratories covers a wide range of research topics in heterogeneous catalysis, homogeneous/molecular catalysis, biocatalysis, electrocatalysis, and surface science. Since much of the work at National Laboratories is funded by DOE, the research is largely focused on addressing DOE's mission to ensure America's security and prosperity by addressing its energy, environmental, and nuclear challenges through transformative science and technology solutions. The catalysis research carried out at the DOE National Laboratories ranges from very fundamental catalysis science, funded by DOE's Office of Basic Energy Sciences (BES), to applied research and development (R&D) in areas such as biomass conversion to fuels and chemicals, fuel cells, and vehicle emission control with primary funding from DOE's Office of Energy Efficiency and Renewable Energy.

09 BIOMASS FUELS↗

Effects of experimentally added salmon subsidies on resident fishes via direct and indirect pathways

Abstract Artificial additions of nutrients of differing forms such as salmon carcasses and analog pellets (i.e. pasteurized fishmeal) have been proposed as a means of stimulating aquatic productivity and enhancing populations of anadromous and resident fishes. Nutrient mitigation to enhance fish production in stream ecosystems assumes that the central pathway by which effects occur is bottom‐up, through aquatic primary and secondary production, with little consideration of reciprocal aquatic‐terrestrial pathways. The net outcome (i.e. bottom‐up vs. top‐down) of adding salmon‐derived materials to streams depend on whether or not these subsidies indirectly intensify predation on in situ prey via increases in a shared predator or alleviate such predation pressure. We conducted a 3‐year experiment across nine tributaries of the N. Fork Boise River, Idaho, USA , consisting of 500‐m stream reaches treated with salmon carcasses (n = 3), salmon carcass analog (n = 3), and untreated control reaches (n = 3). We observed 2–8 fold increases in streambed biofilms in the 2–6 weeks following additions of both salmon subsidy treatments in years 1 and 2 and a 1.5‐fold increase in standing crop biomass of aquatic invertebrates to carcass additions in the second year of our experiment. The consumption of benthic invertebrates by stream fishes increased 110–140% and 44–66% in carcass and analog streams in the same time frame, which may have masked invertebrate standing crop responses in years 3 and 4. Resident trout directly consumed 10.0–24.0 g·m −2 ·yr −1 of salmon carcass and <1–11.0 g·m −2 ·yr −1 of analog material, which resulted in 1.2–2.9 g·m −2 ·yr −1 and 0.03–1.4 g·m −2 ·yr −1 of tissue produced. In addition, a feedback flux of terrestrial maggots to streams contributed 0.0–2.0 g·m −2 ·yr −1 to trout production. Overall, treatments increased annual trout production by 2–3 fold, though density and biomass were unaffected. Our results indicate the strength of bottom‐up and top‐down responses to subsidy additions was asymmetrical, with top‐down forces masking bottom‐up effects that required multiple years to manifest. The findings also highlight the need for nutrient mitigation programs to consider multiple pathways of energy and nutrient flow to account for the complex effects of salmon subsidies in stream‐riparian ecosystems.

Collins, Scott F.↗

NOAA backscatter studies

In the past year, NOAA has measured and analyzed another year's worth of backscatter over Boulder, CO. The average profile was computed from 80 satellite observations of backscatter spread throughout the year, using NOAA's CO2 coherent lidar operating at a wavelength of 10.59 microns. The seasonal averages show a familiar trend (highest backscattering in spring, perhaps due to Asian dust or biomass burning, and lowest backscattering in fall). The 1990 average profile was not significantly different from the 1988 or 1989 profiles, except that it displays a slight increase in the upper troposphere, perhaps due to the Redoubt Volcano. The NOAA's backscatter processing program (BETA) was refined to enable the calculation of gaseous absorption effects based on rawinsonde measurements, as well as using atmospheric models. NOAA participated in two intercomparisons of aerosol measuring instruments near Boulder, called FRLAB (Front Range Lidar, Aircraft, and Balloon Experiment). Considerable effort was also put into developing a multiagency science proposal to NASA headquarters to work with both JPL and NASA-Marshall to produce an airborne Doppler lidar facility for the DC-8.

Post, Madison J.↗

Reaction pathways of furfural, furfuryl alcohol and 2-methylfuran on Cu(111) and NiCu bimetallic surfaces

Hydrodeoxygenation (HDO) is an important reaction for converting biomass-derived furfural to value-added 2-methylfuran, which is a promising fuel additive. In this work, the HDO of furfural to produce 2-methylfuran occurred on the NiCu bimetallic surfaces prepared on either Ni(111) or Cu(111). The reaction pathways of furfural were investigated on Cu(111) and Ni/Cu(111) surfaces using density functional theory (DFT) calculations, temperature programmed desorption (TPD) and high resolution electron energy loss spectroscopy (HREELS) experiments. These studies provided mechanistic insights into the effects of bimetallic formation on enhancing the HDO activity. Specifically, furfural weakly adsorbed on Cu(111), while it strongly adsorbed on Ni/Cu(111) through an η 2 (C,O) configuration which led to the HDO of furfural on Ni/Cu(111). Lastly, the ability to dissociate H 2 on Ni/Cu(111) is also an important factor for enhancing the HDO activity over Cu(111).

2-Methylfuran↗

IX Cell Wall Research Conference 2022 (IXCWRC): Cell wall research for new fundamental discoveries and applications in plant biology

This application is for securing funds to offset the registration fees and lodging costs for US-based early career investigators (ERCs) to participate to the IX Cell Wall Research Conference 2022 (IXCWRC 2022): Cell wall research for new fundamental discoveries and applications in plant biology. The conference will be held in East Lansing, Michigan on June 13-17, 2022. The conference will focus on the plant cell wall. Plant cells are encapsulated by the cell wall, a dynamic structure that protects them, enables them to interface with the external environment and supports the growth of the entire organism. There is a growing interest in understanding the complex processes necessary to build and deconstruct the plant cell wall. A better understanding of how the cell wall is synthesized during plant growth and in response to the environment, and how it is deconstructed for a broad variety of applications can inform and improve biotechnological processes for increasing biomass yield and improving industrial processes for the recovery of valuable, sustainable polymers. Acquiring such knowledge requires the exchange of new ideas and results as well as the development and application of new technologies. The IXCWRC 2022 aims to reach this goal by providing an opportunity for an open forum to discuss new ideas and theories and develop collaborations for scientists across the globe in a diverse and supportive environment. A distinction of the IXCWRC 2022 from all the preceding plant cell wall conferences will be its focus on the training and inclusion of the next generation of scientists, the ERCs. The overall goal of this application is to broaden the participation of ERCs with a focus on underrepresented communities. The specific goal of this application is to secure support for registration and lodging for US-based ERCs to attend the conference. Priority will be given to ERCs from underrepresented communities in science. We expect that support from DOE will allow the development of an exciting and innovative program to discuss the latest scientific advances in cell wall biology research, advance the next generation of plant cell wall researchers and foster the foundations of an inclusive community in science.

59 BASIC BIOLOGICAL SCIENCES↗

OES CO 2 Pipeline FEED Project Design Basis Memorandum

The OES CO₂ Pipeline project will move captured carbon dioxide from two ethanol facilities near Gibson City, Illinois, roughly 7.8 miles southeast to three injection wells outside Anchor, where it will be permanently stored underground. The system is designed to handle up to 4.5 million metric tonnes per year of dense-phase CO₂ at pressures up to 2,500 psig, using 16-inch mainline pipe and 10.750-inch laterals made from API 5L X-60 and X-65 steel. Wall thicknesses vary depending on location, with thinner pipe in open country, heavier wall at road crossings, and the heaviest where the pipe passes under highways or railroads via horizontal directional drill. The pipe gets a fusion-bonded epoxy coating, with an added abrasion-resistant layer wherever it's bored or drilled. Major water crossings will use HDD rather than open trenching. The pipeline will be cathodically protected, equipped with SCADA-compatible pressure and temperature instrumentation, and monitored for leaks using a computational pipeline monitoring system per API RP 1130. Hydrostatic testing will be performed at 1.25 times design pressure, and an ILI caliper run will follow to catch any construction defects. Several items, including fracture toughness requirements, specific NDE methods, and ILI tool selection, are left for the detailed design phase. The whole system falls under 49 CFR Part 195 and ASME B31.4, and Gulf Interstate Engineering prepared this document as the FEED-level design basis under the CarbonSAFE Phase III program.

09 BIOMASS FUELS↗

Systems Biology for Energy and the Environment - DOE Genomic Science Program

DOE's Genomic Science Program advances scientific discovery through Genomics and Systems Biology. This program supports fundamental research to understand the systems biology of plants and microbes as they respond to and modify their local environments. The overall goal of the program is to achieve a predictive, systems-level understanding of plants, microbes, and biological communities to enable biobased solutions to DOE mission challenges in energy and environment.

09 BIOMASS FUELS↗

Aerosol-Radiation-Cloud Interactions in the South-East Atlantic: First Results from the ORACLES-2016 Deployment and Plans for Future Activities

Southern Africa produces almost a third of the Earths biomass burning (BB) aerosol particles. Particles lofted into the mid-troposphere are transported westward over the South-East (SE) Atlantic, home to one of the three permanent subtropical stratocumulus (Sc) cloud decks in the world. The SE Atlantic stratocumulus deck interacts with the dense layers of BB aerosols that initially overlay the cloud deck, but later subside and may mix into the clouds. These interactions include adjustments to aerosol-induced solar heating and microphysical effects, and their global representation in climate models remains one of the largest uncertainties in estimates of future climate. Hence, new observations over the SE Atlantic have significant implications for regional and global climate change predictions.Our understanding of aerosol-cloud interactions in the SE Atlantic is severely limited. Most notably, we are missing knowledge on the absorptive and cloud nucleating properties of aerosols, including their vertical distribution relative to clouds, on the locations and degree of aerosol mixing into clouds, on the processes that govern cloud property adjustments, and on the importance of aerosol effects on clouds relative to co-varying synoptic scale meteorology.We describe first results from various synergistic, international research activities aimed at studying aerosol-cloud interactions in the region:NASAs airborne ORACLES (ObseRvations of Aerosols Above Clouds and Their IntEractionS) deployment in AugustSeptember of 2016,the DoEs LASIC (Layered Atlantic Smoke Interactions with Clouds) deployment of the ARM Mobile Facility to Ascension Island (June 2016 October 2017), the ground-based components of CNRS AEROCLO-sA (Aerosols Clouds and Fog over the west coast of southern Africa), and ongoing regional-scale integrative, process-oriented science efforts as part of SEALS-sA (Sea Earth Atmosphere Linkages Study in southern Africa).We expect to describe experimental setups as well as showcase initial aerosol and cloud property distributions. Furthermore, we discuss the implementation of future activities in these programs in coordination with the UK Met Offices CLARIFY (CLoud-Aerosol-Radiation Interactions and Forcing) experiment in 2017.

aerosol↗

Midwest Nuclear-based Net-Zero Carbon Steelmaking Demonstration

Globally, the iron and steel industry accounts for around a quarter of GHG emissions from the manufacturing sector , which is about 7% of the 33 gigatonnes (Gt) of global CO 2 emissions . Thus, globally, the steel industry is a 2-3 Gt CO 2 per year emissions challenge. The steel industry is important to the U.S. economy with output equal to $0.5 trillion and domestic production capacity is critical to national defense, infrastructure, energy production, and transportation. President Biden’s executive order on climate identifies actions and policies to put the Nation on a path to achieve net-zero carbon emissions, economy-wide, by no later than 2050. To achieve this, deep carbon reductions in the power, transportation, buildings and capital-intensive industrial manufacturing segments such as steel, cement and chemicals need to be addressed. In its recent “Accelerating Decarbonization of the U.S. Energy System” report , the National Academy of Sciences (NAS) stated that, “while technology exists to decarbonize all parts of the energy system, some sectors remain at precommercial or first-of-a-kind demonstration stages and require significant improvement in cost and performance to become commercially viable.” The NAS goes on to state that these hard to decarbonize sectors include “aviation, shipping, and industrial subsectors such as steel, cement, and chemicals manufacturing .” The Administration has proposed a timeline to decarbonize energy, transportation and then industry and manufacturing. From a life-cycle approach, decarbonizing steel and other large industrial inputs are necessary to decarbonize transformations in energy and transportation. DOE’s TRI-Lab Consortium’s Integrated Energy Systems (IES) program is a collaboration amongst DOE’s three applied energy laboratories: the National Energy Technology Laboratory; National Renewable Energy Laboratory and Idaho National Laboratory. The IES approach looks at more tightly integrating low-carbon nuclear energy, renewable electricity, energy storage, load/demand balancing, and biomass (including plastics and other wastes) with one or more industrial processes that utilize heat and/or power from these clean and waste energy sources to produce a low-carbon commodity-scale product.

08 HYDROGEN↗

Light-emitting diodes as an illumination source for plants: a review of research at Kennedy Space Center

The provision of sufficient light is a fundamental requirement to support long-term plant growth in space. Several types of electric lamps have been tested to provide radiant energy for plants in this regard, including fluorescent, high-pressure sodium, and metal halide lamps. These lamps vary in terms of spectral quality, which can result in differences in plant growth and morphology. Current lighting research for space-based plant culture is focused on innovative lighting technologies that demonstrate high electrical efficiency and reduced mass and volume. Among the lighting technologies considered for space are light-emitting diodes (LEDs). The combination of red and blue LEDs has proven to be an effective lighting source for several crops, yet the appearance of plants under red and blue lighting is purplish gray, making visual assessment of plant health difficult. Additional green light would make the plant leaves appear green and normal, similar to a natural setting under white light, and may also offer psychological benefits for the crew. The addition of 24% green light (500-600 nm) to red and blue LEDs enhanced the growth of lettuce plants compared with plants grown under cool white fluorescent lamps. Coincidentally, these plants grown under additional green light would have the additional aesthetic appeal of a green appearance.

NASA Discipline Life Support Systems↗

National Aeronautics and Space Administration (NASA) Earth Science Research for Energy Management: Overview of Energy Issues and an Assessment of the Potential for Application of NASA Earth Science Research - Part 1

Effective management of energy resources is critical for the U.S. economy, the environment, and, more broadly, for sustainable development and alleviating poverty worldwide. The scope of energy management is broad, ranging from energy production and end use to emissions monitoring and mitigation and long-term planning. Given the extensive NASA Earth science research on energy and related weather and climate-related parameters, and rapidly advancing energy technologies and applications, there is great potential for increased application of NASA Earth science research to selected energy management issues and decision support tools. The NASA Energy Management Program Element is already involved in a number of projects applying NASA Earth science research to energy management issues, with a focus on solar and wind renewable energy and developing interests in energy modeling, short-term load forecasting, energy efficient building design, and biomass production.

Atmospheric models↗

Liquid Sunshine to Fuel Your Car (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)

"Liquid Sunshine to Fuel Your Car" was submitted by the Center for Lignocellulose Structure and Formation (CLSF) to the "Life at the Frontiers of Energy Research" video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. CLSF is directed by Daniel Cosgrove at Pennsylvania State University and is a partnership of scientists from three institutions: Penn State (lead), North Carolina State University, and Virginia Tech University. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges. The mission of the Center for Lignocellulose Structure and Formation is 'to dramatically increase our fundamental knowledge of the formation and physical interactions of bio-polymer networks in plant cell walls to provide a basis for improved methods for converting biomass into fuels.' Research topics are: biofuels (biomass), membrane, interfacial characterization, matter by design, and self-assembly.

09 BIOMASS FUELS↗

Refinery Integration Analysis: Pathways, Challenges, and Opportunities

Integrating biomass-derived intermediates into traditional petroleum refineries presents unique challenges and opportunities, requiring innovative analysis approaches that account for biofuel producers and refiners. Consequently, teams within the National Renewable Energy Laboratory (NREL) have developed a comprehensive refinery integration analysis framework that combines experimental data, detailed techno-economic analyses of bio-conversion pathways, and economic projections within refinery linear programming (LP) optimization models. These models enable the identification of promising bio-integration strategies tailored to specific refinery configurations, economic conditions, and production goals. They also capture upstream and downstream impacts, highlighting critical bottlenecks and research opportunities for increasing the share of biogenic feedstocks in traditional refining operations. Refinery models are also packaged into a broader bio-economy optimization framework which enables biofuel supply chain optimization with standalone biofuel production and refinery co-processing/repurposing options. This presentation discusses promising refinery bio-integration strategies along with key challenges and opportunities identified using NREL's refinery and bio-economy optimization frameworks.

09 BIOMASS FUELS↗

Historical (1850-2000) gridded anthropogenic and biomass burning emissions of reactive gases and aerosols:methodology and application

We present and discuss a new dataset of gridded emissions covering the historical period (1850-2000) in decadal increments at a horizontal resolution of 0.5° in latitude and longitude. The primary purpose of this inventory is to provide consistent gridded emissions of reactive gases and aerosols for use in chemistry model simulations needed by climate models for the Climate Model Intercomparison Program #5 (CMIP5) in support of the Intergovernmental Panel on Climate Change (IPCC) Fifth Assessment report. Our best estimate for the year 2000 inventory represents a combination of existing regional and global inventories to capture the best information available at this point; 40 regions and 12 sectors were used to combine the various sources. The historical reconstruction of each emitted compound, for each region and sector, was then forced to agree with our 2000 estimate, ensuring continuity between past and 2000 emissions. Application of these emissions into two chemistry-climate models is used to test their ability to capture long-term changes in atmospheric ozone, carbon monoxide and aerosols distributions. The simulated long-term change in the Northern mid-latitudes surface and mid-troposphere ozone is not quite as rapid as observed. However, stations outside this latitude band show much better agreement in both present-day and long-term trend. The model simulations consistently underestimate the carbon monoxide trend, while capturing the long-term trend at the Mace Head station. The simulated sulfate and black carbon deposition over Greenland is in very good agreement with the ice-core observations spanning the simulation period. Finally, aerosol optical depth and additional aerosol diagnostics are shown to be in good agreement with previously published estimates.

09 BIOMASS FUELS↗