Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “averaging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Self-similar Reynolds-averaged mechanical–scalar turbulence models for Rayleigh–Taylor mixing induced by power-law accelerations in the small Atwood number limit

Analytical self-similar solutions to two-, three-, and four-equation Reynolds-averaged mechanical–scalar turbulence models describing turbulent Rayleigh–Taylor mixing driven by a temporal power-law acceleration are derived in the small Atwood number (Boussinesq) limit. The solutions generalize those previously derived for constant acceleration Rayleigh–Taylor mixing for models based on the turbulent kinetic energy K and its dissipation rate ε, together with the scalar variance S and its dissipation rate χ [O. Schilling, “Self-similar Reynolds-averaged mechanical–scalar turbulence models for Rayleigh–Taylor, Richtmyer–Meshkov, and Kelvin–Helmholtz instability-induced mixing in the small Atwood number limit,” Phys. Fluids 33, 085129 (2021)]. The turbulent fields are expressed in terms of the model coefficients and power-law exponent, with their temporal power-law scalings obtained by requiring that the self-similar equations are explicitly time-independent. Mixing layer growth parameters and other physical observables are obtained explicitly as functions of the model coefficients and parameterized by the exponent of the power-law acceleration. Values for physical observables in the constant acceleration case are used to calibrate the two-, three-, and four-equation models, such that the self-similar solutions are consistent with experimental and numerical simulation data corresponding to a canonical (i.e., constant acceleration) Rayleigh–Taylor turbulent flow. The calibrated four-equation model is then used to numerically reconstruct the mean and turbulent fields, and turbulent equation budgets across the mixing layer for several values of the power-law exponent. Finally, the reference solutions derived here can be used to understand the model predictions for strongly accelerated or decelerated Rayleigh–Taylor mixing in the large Reynolds number limit.

42 ENGINEERING↗

Raster scanning and averaging for reducing the influence of speckles in optical coherence tomography

The application of small-angle raster scanning and averaging in the sample arm of the Michelson interferometer in optical coherence tomography (OCT) is described. Raster averaging is used to increase the signal-to-noise ratio and to reduce the speckle noise of the 2D OCT image in diagnostics of surface layers of human skin and subcutaneous blood vessels in vivo. The method allows using low-coherence source of low-power radiation and increasing the depth of human skin coherent probing up to 1.5 - 1.8 mm. The reduction of speckle noise in the obtained OCT image for the first time allowed visualisation of subcutaneous blood vessels at the entire depth of their localisation. (biophotonics)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Repetitively pulsed Fe: ZnSe laser with an average output power of 20 W at room temperature of the polycrystalline active element

The energy and spectral-temporal characteristics of a Fe : ZnSe laser operating in pulsed and repetitively pulsed regimes are studied at room temperature of the polycrystalline active element. The crystal was pumped by a nonchain electric-discharge HF laser. The energy of the Fe : ZnSe laser in a single-pulse regime was 1.67 J at the slope efficiency with respect to the absorbed and incident energy of ∼43% and ∼27%, respectively. In a repetitively pulsed regime with a pulse repetition rate of 20 Hz and an efficiency with respect to the absorbed power of ∼40%, the average laser power was ∼20 W with an individual pulse energy of ∼1 J. The possibility of increasing the average power of the repetitively pulsed Fe : ZnSe laser at room temperature is discussed. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Disk laser heads based on Yb : YAG for multikilowatt average power lasers

The main factors affecting the cooling efficiency of Yb : YAG disk active elements have been investigated, and key technologies for designing disk lasers with high average power and efficiency have been developed. The main parameters of a disk active element operating in the cw regime are optimised using numerical calculation. Disk laser heads are fabricated based on calculations and developed technologies, and lasing with optical efficiency up to 50 % is demonstrated. An average power at the kilowatt level is obtained in a cavity with two laser heads, and a possibility of its further increasing is demonstrated. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Efficiency enhancement of thermonuclear DD reaction in femtosecond laser plasma with the use of structured low-average-density targets

An increase in the yield of fast neutrons is experimentally demonstrated by exciting a nuclear DD reaction in the interaction of a relativistically intense (over 10{sup 18} W cm{sup −2}) ultrashort laser pulse with a deuterated low-average-density target volume-structured at the wavelength scale. It is shown that decreasing the average target density from 0.78 to 0.35 g cm{sup −3} doubles the neutron flux, which reaches 7 × 10{sup 4} particles per 1 J of input energy. The effect may be associated with an increase in the number of accelerated deuterium ions due to the three dimensional expansion of individual elements of the target structure. (paper)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Validation of a mixture-averaged thermal diffusion model for premixed lean hydrogen flames

The mixture-averaged thermal diffusion model originally proposed by Chapman and Cowling is validated using multiple flame configurations. Simulations using detailed hydrogen chemistry are done on one-, two-, and three-dimensional flames. The analysis spans flat and stretched, steady and unsteady, and laminar and turbulent flames. Quantitative and qualitative results using the thermal diffusion model compare very well with the more complex multicomponent diffusion model. Comparisons are made using flame speeds, surface areas, species profiles, and chemical source terms. Once validated, this model is applied to three-dimensional laminar and turbulent flames. For these cases, thermal diffusion causes an increase in the propagation speed of the flames as well as increased product chemical source terms in regions of high positive curvature. The results illustrate the necessity for including thermal diffusion, and the accuracy and computational efficiency of the mixture-averaged thermal diffusion model.

Schlup, Jason↗

Comparing Measures of Average Color Fidelity

The introduction of new measures of color rendition, especially IES TM-30-15, has stirred debate within the lighting industry on the relative merits of the tools, as well as the amount of difference between the new tools and prior tools, such as CIE Ra. This article focuses on comparing three measures of average color fidelity: IES Rf, CIE Ra, and CIE Rf. Using a large set of commercially-available, experimental, and theoretical spectral power distributions (SPDs), the analysis contrasts past efforts to make similar comparisons using smaller or more focused datasets. It highlights the interactive effect of gamut shape and color space non-uniformity, which results in a range of IES Rf values of at least to 50 to 86 for SPDs having a CIE Ra value of 80. It also examines how these differences can be overlooked in psychophysical experiments relying on a small number of SPDs, which can present misleading findings on the value and meaning of the measures. When considering the results, it is important to remember that average color fidelity is only one aspect of color rendition.

Royer, Michael P.↗

AVERAGE HEATING RATE OF HOT ATMOSPHERES IN DISTANT CLUSTERS BY RADIO ACTIVE GALACTIC NUCLEUS: EVIDENCE FOR CONTINUOUS ACTIVE GALACTIC NUCLEUS HEATING

We examine atmospheric heating by radio active galactic nuclei (AGNs) in distant X-ray clusters by cross correlating clusters selected from the 400 Square Degree (400SD) X-ray Cluster survey with radio sources in the NRAO VLA Sky Survey. Roughly 30% of the clusters show radio emission above a flux threshold of 3 mJy within a projected radius of 250 kpc. The radio emission is presumably associated with the brightest cluster galaxy. The mechanical jet power for each radio source was determined using scaling relations between radio power and cavity (mechanical) power determined for nearby clusters, groups, and galaxies with hot atmospheres containing X-ray cavities. The average jet power of central radio AGNs is approximately 2 x 10{sup 44} erg s{sup -1}. We find no significant correlation between radio power, and hence mechanical jet power, and the X-ray luminosities of clusters in the redshift range 0.1-0.6. This implies that the mechanical heating rate per particle is higher in lower mass, lower X-ray luminosity clusters. The jet power averaged over the sample corresponds to an atmospheric heating of approximately 0.2 keV per particle within R{sub 500}. Assuming the current AGN heating rate does not evolve but remains constant to redshifts of 2, the heating rate per particle would rise by a factor of two. We find that the energy injected from radio AGNs contribute substantially to the excess entropy in hot atmospheres needed to break self-similarity in cluster scaling relations. The detection frequency of radio AGNs is inconsistent with the presence of strong cooling flows in 400SD clusters, but does not exclude weak cooling flows. It is unclear whether central AGNs in 400SD clusters are maintained by feedback at the base of a cooling flow. Atmospheric heating by radio AGNs may retard the development of strong cooling flows at early epochs.

79 ASTRONOMY AND ASTROPHYSICS↗

HELIOSEISMOLOGY OF PRE-EMERGING ACTIVE REGIONS. II. AVERAGE EMERGENCE PROPERTIES

We report on average subsurface properties of pre-emerging active regions as compared to areas where no active region emergence was detected. Helioseismic holography is applied to samples of the two populations (pre-emergence and without emergence), each sample having over 100 members, which were selected to minimize systematic bias, as described in Leka et al. We find that there are statistically significant signatures (i.e., difference in the means of more than a few standard errors) in the average subsurface flows and the apparent wave speed that precede the formation of an active region. The measurements here rule out spatially extended flows of more than about 15 m s{sup -1} in the top 20 Mm below the photosphere over the course of the day preceding the start of visible emergence. These measurements place strong constraints on models of active region formation.

79 ASTRONOMY AND ASTROPHYSICS↗

FOREGROUND MODEL AND ANTENNA CALIBRATION ERRORS IN THE MEASUREMENT OF THE SKY-AVERAGED λ21 cm SIGNAL AT z∼ 20

The most promising near-term observable of the cosmic dark age prior to widespread reionization (z ∼ 15-200) is the sky-averaged λ21 cm background arising from hydrogen in the intergalactic medium. Though an individual antenna could in principle detect the line signature, data analysis must separate foregrounds that are orders of magnitude brighter than the λ21 cm background (but that are anticipated to vary monotonically and gradually with frequency, e.g., they are considered {sup s}pectrally smooth{sup )}. Using more physically motivated models for foregrounds than in previous studies, we show that the intrinsic spectral smoothness of the foregrounds is likely not a concern, and that data analysis for an ideal antenna should be able to detect the λ21 cm signal after subtracting a ∼fifth-order polynomial in log ν. However, we find that the foreground signal is corrupted by the angular and frequency-dependent response of a real antenna. The frequency dependence complicates modeling of foregrounds commonly based on the assumption of spectral smoothness. Our calculations focus on the Large-aperture Experiment to detect the Dark Age, which combines both radiometric and interferometric measurements. We show that statistical uncertainty remaining after fitting antenna gain patterns to interferometric measurements is not anticipated to compromise extraction of the λ21 cm signal for a range of cosmological models after fitting a seventh-order polynomial to radiometric data. Our results generalize to most efforts to measure the sky-averaged spectrum.

79 ASTRONOMY AND ASTROPHYSICS↗

A BROADBAND RADIO STUDY OF THE AVERAGE PROFILE AND GIANT PULSES FROM PSR B1821-24A

We present the results of a wideband (720–2400 MHz) study of PSR B1821–24A (J1824–2452A, M28A), an energetic millisecond pulsar (MSP) visible in radio, X-rays and γ-rays. In radio, the pulsar has a complex average profile that spans ≳85% of the spin period and exhibits strong evolution with observing frequency. For the first time we measure phase-resolved polarization properties and spectral indices of radio emission throughout almost all of the on-pulse window. We synthesize our findings with high-energy information to compare M28A to other known γ-ray MSPs and to speculate that M28A’s radio emission originates in multiple regions within its magnetosphere (i.e., both in the slot or outer gaps near the light cylinder and at lower altitudes above the polar cap). M28A is one of a handful of pulsars that are known to emit giant radio pulses (GRPs)—short, bright radio pulses of unknown nature. We report a drop in the linear polarization of the average profile in both windows of GRP generation and also a “W”-shaped absorption feature (resembling a double notch), partly overlapping with one of the GRP windows. The GRPs themselves have broadband spectra consisting of multiple patches with Δν/ν ∼ 0.07. Although our time resolution was not sufficient to resolve the GRP structure on the μs scale, we argue that GRPs from this pulsar most closely resemble the GRPs from the main pulse of the Crab pulsar, which consist of a series of narrowband nanoshots.

79 ASTRONOMY AND ASTROPHYSICS↗

A method for the estimation of p-mode parameters from averaged solar oscillation power spectra

A new fitting methodology is presented that is equally well suited for the estimation of low-, medium-, and high-degree mode parameters from m-averaged solar oscillation power spectra of widely differing spectral resolution. This method, which we call the “Windowed, MuLTiple-Peak, averaged-spectrum” or WMLTP Method, constructs a theoretical profile by convolving the weighted sum of the profiles of the modes appearing in the fitting box with the power spectrum of the window function of the observing run, using weights from a leakage matrix that takes into account observational and physical effects, such as the distortion of modes by solar latitudinal differential rotation. We demonstrate that the WMLTP Method makes substantial improvements in the inferences of the properties of the solar oscillations in comparison with a previous method, which employed a single profile to represent each spectral peak. We also present an inversion for the internal solar structure, which is based upon 6366 modes that we computed using the WMLTP method on the 66 day 2010 Solar and Heliospheric Observatory/MDI Dynamics Run. To improve both the numerical stability and reliability of the inversion, we developed a new procedure for the identification and correction of outliers in a frequency dataset. We present evidence for a pronounced departure of the sound speed in the outer half of the solar convection zone and in the subsurface shear layer from the radial sound speed profile contained in Model S of Christensen-Dalsgaard and his collaborators that existed in the rising phase of Solar Cycle 24 during mid-2010.

79 ASTRONOMY AND ASTROPHYSICS↗

Measurement of the average shape of longitudinal profiles of cosmic-ray air showers at the Pierre Auger Observatory

The profile of the longitudinal development of showers produced by ultra-high energy cosmic rays carries information related to the interaction properties of the primary particles with atmospheric nuclei. In this work, we present the first measurement of the average shower profile in traversed atmospheric depth at the Pierre Auger Observatory. The shapes of profiles are well reproduced by the Gaisser-Hillas parametrization within the range studied, for E>1017.8 eV . A detailed analysis of the systematic uncertainties is performed using ten years of data and a full detector simulation. The average shape is quantified using two variables related to the width and asymmetry of the profile, and the results are compared with predictions of hadronic interaction models for different primary particles.

79 ASTRONOMY AND ASTROPHYSICS↗

ON THE AVERAGE DENSITY PROFILE OF DARK-MATTER HALOS IN THE INNER REGIONS OF MASSIVE EARLY-TYPE GALAXIES

We study a sample of 39 massive early-type lens galaxies at redshift z {approx}< 0.3 to determine the slope of the average dark-matter density profile in the innermost regions. We keep the strong-lensing and stellar population synthesis modeling as simple as possible to measure the galaxy total and luminous masses. By rescaling the values of the Einstein radius and dark-matter projected mass with the values of the luminous effective radius and mass, we combine all the data of the galaxies in the sample. We find that between 0.3 and 0.9 times the value of the effective radius the average logarithmic slope of the dark-matter projected density profile is -1.0 {+-} 0.2 (i.e., approximately isothermal) or -0.7 {+-} 0.5 (i.e., shallower than isothermal), if, respectively, a constant Chabrier or heavier, Salpeter-like stellar initial mass function is adopted. These results provide positive evidence of the influence of the baryonic component on the contraction of the galaxy dark-matter halos, compared to the predictions of dark-matter-only cosmological simulations, and open a new way to test models of structure formation and evolution within the standard {Lambda}CDM cosmological scenario.

79 ASTRONOMY AND ASTROPHYSICS↗

Average entanglement for Markovian quantum trajectories

We study the evolution of the entanglement of noninteracting qubits coupled to reservoirs under monitoring of the reservoirs by means of continuous measurements. We calculate the average of the concurrence of the qubits wave function over all quantum trajectories. For two qubits coupled to independent baths subjected to local measurements, this average decays exponentially with a rate depending on the measurement scheme only. This contrasts with the known disappearance of entanglement after a finite time for the density matrix in the absence of measurements. For two qubits coupled to a common bath, the mean concurrence can vanish at discrete times. Our analysis applies to arbitrary quantum jump or quantum state diffusion dynamics in the Markov limit. We discuss the best measurement schemes to protect entanglement in specific examples.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dynamic evolution of temporal dissipative-soliton molecules in large normal path-averaged dispersion fiber lasers

The robust dissipative soliton molecules (DSM's) exhibiting as the quasirectangular spectral profile are investigated numerically and observed experimentally in mode-locked fiber lasers with the large normal path-averaged dispersion and the large net cavity dispersion. These DSM's have an independently evolving phase with a pulse duration T{sub 0} of about 20 ps and a peak-to-peak separation of about 8T{sub 0}. Under laboratory conditions, the proposed laser delivers vibrating DSM's with an oscillating amplitude of less than a percent of peak separation. Numerical simulations show that DSM's are characterized by a spectral modulation pattern with about a 3-dB modulation depth measured as an averaged value. The experimental observations are in excellent agreement with the numerical predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Time-averaged adiabatic ring potential for ultracold atoms

We report the experimental realization of a versatile ring trap for ultracold atoms. The ring geometry is created by the time-averaged adiabatic potential resulting from the application of an oscillating magnetic bias field to a rf-dressed quadrupole trap. Lifetimes for a Bose-Einstein condensate in the ring exceed 11s and the ring radius was continuously varied from 50 {mu}m to 262 {mu}m. An efficient method of loading the ring from a conventional time-averaged orbiting potential trap is presented together with a rotation scheme which introduces angular momentum into the system. The ring presents an opportunity to study the superfluid properties of a condensate in a multiply connected geometry and also has applications for matter-wave interferometry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Averaged cluster approach to including chemical short-range order in KKR-CPA

The single-site Korringa-Kohn-Rostoker coherent potential approximation (KKR-CPA) ignores short-range ordering present in disordered metallic systems. Here in this paper, we establish a technique to fix this shortcoming by embedding an averaged cluster that displays chemical short-range order (SRO). The degree of SRO can be tuned by externally defined order parameters. This averaged cluster can be embedded in the single-site CPA medium or a self-consistently obtained effective medium that contains SRO information. The validity of this method is demonstrated by applying it to two alloy systems—the CuZn body-centered cubic (BCC) solid solution, and AlCrTiV, a four-element BCC high entropy alloy. A comparison between the non-self-consistent and self-consistent modes is also provided for the two above-mentioned systems. We make the code available on the internet. Planned extensions to this paper are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗