Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “attribute measurement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Low-Loss Charge Transfer Plasmons in Graphene/α-RuCl 3 Heterostructures Below 40 K

Charge transfer at material interfaces governs a wide range of physical properties, from electronic band structures to emergent collective excitations. In two-dimensional (2D) material heterostructures, charge transfer phenomena play important roles in enabling novel quantum phases, proximity effects, and tunable plasmonic responses. One representative charge transfer interface is formed between α-RuCl 3 , a van der Waals material with high electron affinity, and graphene. Significant charge transfer across this interface induces the formation of charge-transfer plasmon polaritons (CPPs), hybrid excitations between light and charge oscillations. However, previous studies found that as the charge transfer process takes place, α-RuCl 3 becomes lossy, which limits the quality factor of CPPs. Here, we investigate CPPs down to 10 K using a home-built scattering-type scanning near-field optical microscope (s-SNOM) optimized for low-temperature measurements. Our study reveals a dramatic suppression of plasmon loss channels below 40 K, contributing to a significant enhancement in the plasmonic quality factor. This reduction in loss is likely attributed to the blue shift of the correlation-induced Mott gap in α-RuCl 3 with decreasing temperature, along with the reduction of phonon scattering at low temperature. In conclusion, our results highlight the potential of using s-SNOM and CPPs to study complex 2D interfaces and reveal correlated electron dynamics in the underlying material.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effect of Grain Shape and Relative Humidity on the Nonlinear Elastic Properties of Granular Media

Abstract This study focuses on unraveling the microphysical origins of the nonlinear elastic effects, which are pervasive in the Earth's crust. Here, we examine the influence of grain shape on the elastic nonlinearity of granular assemblies. We find that the elastic nonlinearity of angular sand particles is of the same order of magnitude as that previously measured in spherical glass beads. However, while the elastic nonlinearity of glass beads increases by an order of magnitude with RH that of sand particles is rather RH independent. We attribute this difference to the angularity of sand particles: absorbed water on the spherical grains weakens the junctions making them more nonlinear, while no such effect occurs in sand due to grain interlocking. Additionally, for one of the nonlinear parameters that likely arises from shearing/partial slip of the grain junctions, we observe a sharp amplitude threshold in sand which is not observed in glass beads.

58 GEOSCIENCES↗
DOE OSTI2023

Coupling to octahedral tilts in halide perovskite nanocrystals induces phonon-mediated attractive interactions between excitons

Understanding the origin of electron–phonon coupling in lead halide perovskites is key to interpreting and leveraging their optical and electronic properties. Here we show that photoexcitation drives a reduction of the lead–halide–lead bond angles, a result of deformation potential coupling to low-energy optical phonons. We accomplish this by performing femtosecond-resolved, optical-pump–electron-diffraction-probe measurements to quantify the lattice reorganization occurring as a result of photoexcitation in nanocrystals of FAPbBr 3 . Our results indicate a stronger coupling in FAPbBr 3 than CsPbBr 3 . We attribute the enhanced coupling in FAPbBr 3 to its disordered crystal structure, which persists down to cryogenic temperatures. We find the reorganizations induced by each exciton in a multi-excitonic state constructively interfere, giving rise to a coupling strength that scales quadratically with the exciton number. This superlinear scaling induces phonon-mediated attractive interactions between excitations in lead halide perovskites.

36 MATERIALS SCIENCE↗
DOE OSTI2023

In-situ coating of silicon-rich films on tokamak plasma-facing components with real-time Si material injection

Abstract Experiments have been conducted in the DIII-D tokamak to explore the in-situ growth of silicon-rich layers as a potential technique for real-time replenishment of surface coatings on plasma-facing components (PFCs) during steady-state long-pulse reactor operation. Silicon (Si) pellets of 1 mm diameter were injected into low- and high-confinement (L-mode and H-mode) plasma discharges with densities ranging from 3.9– 7.5 × 10 19 m −3 and input powers ranging from 5.5 to 9 MW. The small Si pellets were delivered with the impurity granule injector at frequencies ranging from 4 to 16 Hz corresponding to mass flow rates of 5–19 mg s −1 (1– 4.2 × 10 20 Si s −1 ) at cumulative amounts of up to 34 mg of Si per five-second discharge. Graphite samples were exposed to the scrape-off layer and private flux region plasmas through the divertor material evaluation system to evaluate the Si deposition on the divertor targets. The Si II emission at the sample correlates with silicon injection and suggests net surface Si-deposition in measurable amounts. Post-mortem analysis showed Si-rich coatings containing silicon oxides, of which SiO 2 is the dominant component. No evidence of SiC was found, which is attributed to low divertor surface temperatures. The in-situ and ex-situ analysis found that Si-rich coatings of at least 0.4–1.2 nm thickness have been deposited at 0.4–0.7 nm s −1 . The technique is estimated to coat a surface area of at least 0.94 m 2 on the outer divertor. These results demonstrate the potential of using real-time material injection to form Si-enriched layers on divertor PFCs during reactor operation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Dark Lock-in Thermography Identifies Solder Bond Failure as the Root Cause of Series Resistance Increase in Fielded Solar Modules

Correlating the electrical performance of photovoltaic modules to the spatially resolved photoluminescence, electroluminescence, and dark lock-in thermography (DLIT) images is an important long-term goal for developing solar cell technology. These images offer highly sophisticated and detailed information about the spatial distribution and (if imaged at successive time intervals) temporal degradation of local series and shunt resistances. There have been extensive studies to correlate these imaging techniques to local characteristics at the cell level. However, it has been difficult to extract and quantify module-level information from the techniques. In this study, we interpret module current-voltage (I-V) measurements along with corresponding DLIT images within a module-scale simulation framework, demonstrating that series resistance degradation of the module I-V characteristics, in this case, can be attributed to solder bond failures. Our simulations highlight how current crowding associated with a failed solder joint (or a section of the solder pad) translates to the characteristic point-like (asymmetric doublet) heating pattern in neighboring solder joints (or the neighboring regions of the solder pad). Overall, the correlation between series resistance and solder joint degradation could inform expedited diagnosis of field degradation of solar modules.

42 ENGINEERING↗
DOE OSTI2022

Rock Physics-Based Data Assimilation of Integrated Continuous Active-Source Seismic and Pressure Monitoring Data during Geological Carbon Storage

Summary There has been substantial controversy concerning the role of geological carbon storage (GCS) in sequestering anthropogenic carbon emissions to mitigate climate change and global warming. Arguments center on the inability to monitor a geological storage site precisely and continuously, especially highlighting the associated costs and spatiotemporal trade-offs when using conventional subsurface monitoring techniques (well logs, core samples, chemical tracers, and 4D seismics). Active surveillance of GCS sites is essential for managing and mitigating potential leaks but is also required by regulation. With the goal of enhancing the monitoring capability at GCS sites, we present a rock physics-based joint data assimilation model to study a popular GCS site at Cranfield, Mississippi, USA. Synthetic continuous active-source seismic monitoring (CASSM) data (in the form of Vp and Qp measurements) and wellbore pressure monitoring data are assimilated with an ensemble of reservoir realizations to monitor gas saturation and reservoir pressure changes over a period of 100 years. Synthetic seismic attributes are generated using rock physics models (RPMs) and wellbore pressure monitoring data are extracted from the ground truth. Two assimilation methods, ensemble Kalman filter (EnKF) and ensemble Kalman smoother (EnKS), are tested in an observation system simulation experiment (OSSE) environment to assess the prediction accuracy of the individual and composite observation systems. The joint monitoring system achieves more accurate estimates of gas saturation and pressure, across the time span from start of injection to end of forecast, as compared to a single type of monitoring tool and irrespective of data assimilation algorithm choice. These results indicate that jointly assimilated data from two types of sensors (in this case, crosswell seismic and downhole pressure) may lead to a more risk-reducing monitoring design. One would expect that more data, vis-à-vis inclusion of a new sensor type, will improve the accuracy of any GCS monitoring system. However, from a practical standpoint, one important question is whether such a gain in accuracy is worth the additional cost associated with the new sensor. This paper focuses on quantifying the gain in accuracy, such that a practitioner can answer this question.

Engineering↗
DOE OSTI2025

Investigation of the Anisotropy of Y-Ba-Cu-O Thin Films With Photoemission Electron Microscopy

Understanding the anisotropy in the electrical properties of YBa2Cu3O7-δ (YBCO) is important for understanding the fundamental mechanism of superconductivity in unconventional superconductors. Additionally it is also essential for achieving uniform and controllable critical currents and resistances in YBCO Josephson junctions. Here, this study correlates work function measurements of different intrinsic regions on YBCO thin films, obtained through PhotoEmission Electron Microscopy (PEEM), with in plane tunneling data and helium ion imaging. YBCO thin films, 40 nm in thickness, were selectively irradiated with 300 keV helium using a Pelletron to investigate the effects of irradiation compared to unirradiated regions. Post-irradiation PEEM images revealed distinct contrasts between irradiated and non-irradiated regions, suggesting a metal-to-insulator transition. In non-irradiated areas, a domain pattern was detected, showing a 25 meV difference in work function, attributed to CuO and BaO rich surface regions. A similar domain structure was observed using high-resolution helium ion imaging; however, the helium ion beam can damage the YBCO, making PEEM a valuable non-destructive alternative. This work highlights the correlation between PEEM measurements and in-plane tunneling properties of YBCO, providing insights into material orientation and its impact on Josephson junction performance. Furthermore, it offers a non-destructive approach to understanding the anisotropy of cuprate materials, its superconducting properties, and the factors affecting Josephson junction performance.

Qu, Rochelle Y. [Univ. of California, Riverside, C↗
DOE OSTI2025

Unequal {110} Facets: The Potential Role of Intraparticle Heterogeneity and Facet Termination in Photoelectrochemical Activity of Single BiVO 4 Particles

BiVO 4 photoanodes are promising for solar water splitting, with photogenerated electrons and holes preferentially reacting at top {010} and lateral {110} facets, respectively. However, the mechanisms driving this facet-dependent reactivity remain unclear. Here, in this study, we investigate facet-dependent photocurrent and material heterogeneity using correlative scanning photoelectrochemical microscopy (SPCM), electron beam induced current (EBIC) mapping, and mid-IR scattering scanning near-field optical microscopy (s-SNOM). SPCM measurements of 62 BiVO 4 particles confirmed higher photocurrents at lateral {110} facets compared to top {010} facets, but unexpectedly revealed variations in photocurrent among lateral facets within the same particle. Variations in lateral facet surface termination could explain the intraparticle-level reactivity heterogeneity, consistent with theoretical predictions. Nano-FTIR spectroscopy and Raman microspectroscopy indicated significant materials chemistry heterogeneity within individual particles and facets that could be attributed to variations in lattice vibration distortions that enhance the overlap between Bi 6s and O 2p orbitals. The increased orbital overlap is significant as it potentially increases hole mobility in the valence band and potentially explains the lateral facet-dependent charge separation efficiency observed in photocurrent maps. Facet-dependent electrical and EBIC measurements showed no space charge regions at interfacet junctions or metal-BiVO 4 contacts under vacuum, suggesting that photogenerated holes beneath top {010} facets are unlikely to transport to lateral {110} facets to drive water/sulfite oxidation. These findings indicate the potential influence of distinct bulk properties and surface termination chemistries across different particles and facets, highlighting the importance of carefully controlling defects and surface chemistry during sample growth to optimize photocatalytic performance.

BiVO4↗
DOE OSTI2020

High-efficiency single-junction p-i-n GaAs solar cell on roll-to-roll epi-ready flexible metal foils for low-cost photovoltaics

We demonstrate the fabrication and characterization of high-efficiency, single-junction p-i-n GaAs solar cells, on flexible metal foil with epi-ready buffer via roll-to-roll fabrication. Single-junction p-i-n GaAs solar cells were fabricated using metal–organic chemical vapor deposition (MOCVD). Furthermore, an efficiency greater than 13% was obtained at 1 sun, which is the highest reported efficiency on GaAs photovoltaics directly deposited on metal tapes. This exceeds our previously reported study showcasing 11.5% efficiency on single-junction p-n solar cell structure. Improved morphology of p-i-n structure compared with p-n is explained by atomic force microscopy (AFM), scanning electron microscopy (SEM), and helium ion microscopy (HIM) measurements. Time-of-flight secondary ion mass spectrometry (TOF-SIMS) analysis showed reduced Zn diffusion in p-i-n cell compared with the p-n cell. We attribute the improvement in efficiency of p-i-n cells on flexible metal tapes to the quality of the junction, surface morphology, controlled diffusion of species within the active layers, and increase in absorption due to the optimized intrinsic layer thickness.

14 SOLAR ENERGY↗
DOE OSTI2020

Cellular and extracellular C contributions to respiration after wetting dry soil

Wetting of dry soil triggers a pulse of microbial respiration that has been attributed to two broad mechanisms: (1) recycling of microbial cellular carbon (C), and (2) consumption of extracellular organic C made available to microbes by wetting. We evaluated these two mechanisms by measuring cumulative CO 2 release, changes in the size and chemical composition of microbial biomass, and water-extractable organic carbon (WEOC) concentrations following artificial wetting of soil sampled from two depths at each of seven sites across California spanning a range of geologic parent materials. In samples collected from surface soil (0–10 cm depth), we found that cumulative CO 2 release after wetting in the laboratory was most strongly correlated with microbial biomass. In these samples, the relative abundance of trehalose—a putative microbial osmolyte—decreased from 25% (SD = 12) to 16% (SD = 7) of the chloroform-labile fraction of the microbial biomass after wetting. This suggested a role for osmolyte consumption in generating the respiration pulse. In subsoil (40–50 cm depth, or sampled at contact with rock), however, the cumulative CO2 release after wetting was unrelated to microbial biomass and more strongly related to WEOC. The concentrations of selected microbial biomass constituents (e.g. trehalose and amino acids) in WEOC were negligible (< 1%), suggesting that cell lysis was not important in generating WEOC in this study. The amount of WEOC relative to total organic C was greatest in subsoil, and negatively related to ammonium oxalate-extractable Fe (Pearson’s R = 0.42, p < 0.01), suggesting a role for soil mineralogical properties in controlling WEOC release. Together, these findings suggest that microbial cellular C and extracellular C jointly contribute to the respiration pulse, and that their relative contribution depends on depth.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

A record high average ZT over a wide temperature range in a Single-layer Sb 2 Si 2 Te 6

Conversion of waste heat into usable energy requires development of thermoelectric materials with high efficiency in a wide temperature range. Here, using first principles theory and Boltzmann transport theory, we show that the thermoelectric performance of the p-type single-layer Sb 2 Si 2 Te 6 has a high figure of merit ZT of 2.62 at 900 K and a record high average ZT of ~1.93 (corresponding the conversion efficiency of ~23.2%) in the temperature range of 300-900 K. These values are significantly higher than the recently measured average ZT of ~0.57 in the temperature range of 310–823 K [Luo et al., Joule 4, 159–175 (2020)] in layered bulk Sb 2 Si 2 Te 6 . We attribute the large enhancement of ZT in the single layer material to the increase in the thermoelectric power factor resulting from the complex Fermi surface. Our work reveals the great potential of a single-layer Sb 2 Si 2 Te 6 for wide-temperature-range thermoelectric applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Densification, microstructure, and mechanical properties of Mo–30W alloys fabricated from conditioned powders

Refractory alloys, such as molybdenum-based systems, are attracting growing interest for applications in extreme environments, such as in the nuclear and aerospace industries. Recent advances in sintering technologies, coupled with mechanical alloying, have enabled the tailored design of these alloys by leveraging powder characteristics to control final microstructures and mechanical properties. In this study, Mo-30W alloys were fabricated using electric field-assisted sintering (EFAS) from ball-milled powders with and without hydrogen treatment to investigate the influence of surface oxides on material properties and sintering behavior. The results revealed that samples processed from as-ball-milled powder contained a high density of oxides within the microstructure, whereas oxide presence was significantly reduced in samples fabricated from hydrogen-treated powders. Interestingly, the two powder types led to opposite trends in grain size distribution: samples from untreated powders exhibited grain refinement from sample periphery to the center, while samples from hydrogen-treated powders showed grain coarsening toward the center. This behavior is attributed to temperature gradients present during sintering due to electrical percolation pathway differences during Joule heating. The powder surface oxides may have influenced the temperature distribution and grain evolution. Microhardness profiles measured along both axial and thickness directions were consistent with the grain size distribution. Furthermore, oxide films on powder surfaces have delayed densification by hindering particle necking and atomic diffusion during sintering.

36 - MATERIALS SCIENCE↗
DOE OSTI2025

Molecular Modifications of Crystalline Poly(triazine imide) for Advancing Its Structure–Property Relationships in Light-Driven Catalysis

Carbon-nitride materials represent light-absorbing structures composed of earth-abundant elements capable of being leveraged for semiconductor photocatalysis at their surfaces. This study systematically investigates the addition of molecular modifiers to the synthesis of crystalline carbon nitrides to assess their effects on the materials’ structure, optical bandgap, and photocatalytic activity for hydrogen (H 2 ) and oxygen (O 2 ) evolution under ultraviolet and visible-light irradiation. Melamine and five pyrimidine-centered analogs were employed as building blocks to modify various heteroatoms within the polymeric framework. The modified materials were characterized with attention to the differences introduced by the monomeric modifiers and their influence on the resulting structures and compositions. The findings indicate that these changes significantly broaden the visible-light absorption range, albeit with the gradual loss of the bulk crystalline structure. As the loading of modifiers increased beyond 50%, a predominantly amorphous form of carbon nitride emerged. XPS, 13 C solid-state NMR, and SEM analyses corroborated the changes, which were attributed to modifications of the elemental composition and a reduced amount of Li cations and charge-balancing Cl anions owing to fewer binding sites in the intralayer cavities. In photocatalytic measurements under an ultraviolet 390 nm LED, and aided by photodeposited nanoparticle cocatalysts, the unmodified PTI-LiCl framework demonstrated the highest H 2 evolution rate (HER; 3.44 mmol·g –1 ·h –1 ) with an apparent quantum yield of 5.4%, along with total water splitting at rates of 163 μmol of H 2 ·g –1 ·h –1 and 75.6 μmol·O 2 g –1 ·h –1 . While PTI-LiCl showed trace activity under a visible-light 440 nm LED, all modified materials exhibited enhanced reactivity with as low as 5% molecular modifiers. The photocatalytic rates peaked at a 15% modification level when using 2,4,6-triaminopyrimidine, with rates of 33 μmol·g –1 ·h –1 for HER, along with 19.7 μmol of H 2 ·g –1 ·h –1 and 8.7 μmol of O 2 ·g –1 ·h –1 for total water splitting. Density functional theory calculations were used to probe electronic structure changes resulting from the modifications. Furthermore, these results elucidate the structural, optical, and electronic changes arising from the five selected molecular modifiers and their impact on the semiconductors’ photocatalytic properties.

Electrical conductivity↗
DOE OSTI2025

Stable Metal–Organic Electrocatalysts for Anion-Exchange Membrane Water Electrolyzers by Defect Engineering

Developing efficient and durable catalysts for the alkaline oxygen evolution reaction (OER) is vital to achieving practical anion-exchange membrane water electrolyzers (AEMWE) for green hydrogen production. In this work, we break the activity-stability trade-off of electrocatalysis by defect engineering of Ni-based metal-organic electrocatalysts (Ni-benzene dicarboxylate; Ni-BDC) through coordinating ferrocenecarboxylates (Fc) to the metal sites. Experimental results collectively reveal that the defect MOF (Ni-BDC:Fc_5:1) exhibits a high OER turnover frequency of 0.75 O 2 s -1 at 300 mV overpotential. Operando Raman spectroscopy and isotope-labelling electrochemical mass spectrometry measurements indicate the structure of Ni-BDC:Fc_5:1 is also more stable in service than that of pure Ni-BDC. The high activity and stability could be attributed to the moderate defects (i.e., unsaturated Ni sites) in the structure that not only increase the intrinsic activity and stability of the local active environment by inhibiting lattice oxygen exchange, but also electrochemically activates the bulk of the catalysts by creating a porous network that facilitates internal H 2 O/OH - conduction with enhanced electronic conduction. Accordingly, an AEMWE employing Ni-BDC:Fc_5:1 as the OER catalyst delivers an industrial-level current density of 1 A cm -2 at 1.73 V cell and can be steadily operated for more than 120 hours.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Joint CO 2 Mole Fraction and Flux Analysis Confirms Missing Processes in CASA Terrestrial Carbon Uptake Over North America

Terrestrial biosphere models (TBMs) play a key role in the detection and attribution of carbon cycle processes at local to global scales and in projections of the coupled carbon-climate system. TBM evaluation commonly involves direct comparison to eddy-covariance flux measurements. This study uses atmospheric CO 2 mole fraction ([CO 2 ]) measured in situ from aircraft and tower, in addition to flux-measurements from summer 2016 to evaluate the CASA TBM. WRF-Chem is used to simulate [CO 2 ] using biogenic CO 2 fluxes from a CASA parameter-based ensemble and CarbonTracker version 2017 (CT2017) in addition to transport and CO 2 boundary condition ensembles. The resulting “super ensemble” of modeled [CO 2 ] demonstrates that the biosphere introduces the majority of uncertainty to the simulations. Both aircraft and tower [CO 2 ] data show that the CASA ensemble net ecosystem exchange (NEE) of CO 2 is biased high (NEE too positive) and identify the maximum light use efficiency E max a key parameter that drives the spread of the CASA ensemble in summer 2016. These findings are verified with flux-measurements. The direct comparison of the CASA flux ensemble with flux-measurements confirms missing sink processes in CASA. Separating the daytime and nighttime flux, we discover that the underestimated net uptake results from missing sink processes that result in overestimation of respiration. NEE biases are smaller in the CT2017 posterior biogenic fluxes, which assimilates observed [CO 2 ]. Flux tower analyses, however, reveal an unrealistic overestimation of nighttime respiration in CT2017 due to the limitation of inversion strategy.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Oxygen isotope evidence from Ryugu samples for early water delivery to Earth by CI chondrites

The delivery of water to the inner Solar System, including Earth, is still a debated topic. A preferential role for hydrated asteroids in this process is supported by isotopic measurements. Carbonaceous chondrite (CC) meteorites represent our main source of information about these volatile-rich asteroids. However, the destruction of weaker materials during atmospheric entry creates a bias in our CC data. The return of surface materials from the C-type asteroid 162173 Ryugu by the Hayabusa2 spacecraft provides a unique opportunity to study high-porosity, low-density, primitive materials, unrepresented in the meteorite record. We measured the bulk oxygen isotope composition from four Ryugu particles and show that they most closely resemble the rare CI (CC Ivuna-type) chondrites, but with some differences that we attribute to the terrestrial contamination of the CI meteorites. We suggest that CI-related material is widespread among carbonaceous asteroids and a more important source of Earth’s water and other volatiles than its limited presence in our meteoritic collection indicates.

58 GEOSCIENCES↗
DOE OSTI2022

Anomalous thermal transport under high pressure in boron arsenide

High pressure represents extreme environments and provides opportunities for materials discovery. Thermal transport under high hydrostatic pressure has been investigated for more than 100 years and all measurements of crystals so far have indicated a monotonically increasing lattice thermal conductivity. Here we report in situ thermal transport measurements in the newly discovered semiconductor crystal boron arsenide, and observe an anomalous pressure dependence of the thermal conductivity. We use ultrafast optics, Raman spectroscopy and inelastic X-ray scattering measurements to examine the phonon bandstructure evolution of the optical and acoustic branches, as well as thermal conductivity under varied temperatures and pressures up to 32 gigapascals. Using atomistic theory, we attribute the anomalous high-pressure behaviour to competitive heat conduction channels from interactive high-order anharmonicity physics inherent to the unique phonon bandstructure. Our study verifies ab initio theory calculations and we show that the phonon dynamics—resulting from competing three-phonon and four-phonon scattering processes—are beyond those expected from classical models and seen in common materials. In conclusion, this work uses high-pressure spectroscopy combined with atomistic theory as a powerful approach to probe complex phonon physics and provide fundamental insights for understanding microscopic energy transport in materials of extreme properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗