SEARCH · Engineering Papers

Results for “airfoil”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Numerical solutions of the linearized Euler equations for unsteady vortical flows around lifting airfoils

A linearized unsteady aerodynamic analysis is presented for unsteady, subsonic vortical flows around lifting airfoils. The analysis fully accounts for the distortion effects of the nonuniform mean flow on the imposed vortical disturbances. A frequency domain numerical scheme which implements this linearized approach is described, and numerical results are presented for a large variety of flow configurations. The results demonstrate the effects of airfoil thickness, angle of attack, camber, and Mach number on the unsteady lift and moment of airfoils subjected to periodic vortical gusts. The results show that mean flow distortion can have a very strong effect on the airfoil unsteady response, and that the effect depends strongly upon the reduced frequency, Mach number, and gust wave numbers.

Scott, James R.↗

NASA NTRS1989

Design and development of a facility for compressible dynamic stall studies of a rapidly pitching airfoil

A facility for the study of dynamic stall of an airfoil undergoing a transient ramp-type pitching motion is described. The facility can produce pitch rates of 3600 deg/sec to an angle of attack of 60 deg by using a specially designed hydraulic drive with feedback control. The ramp motion generator can also generate arbitrary motion of the airfoil and thus can simulate an arbitrary aircraft maneuver. A unique airfoil support system allows unobstructed flow visualization including the complete airfoil contour, thus permitting the use of nonintrusive optical diagnostic methods for flow measurement close to the surface as well as simultaneous far-field measurements. Schlieren pictures obtained during the study reveal the instantaneous density gradients associated with dynamic stall, even under conditions of very low Mach numbers.

Chandrasekhara, M. S.↗

NASA NTRS1990

Numerical solutions of the linearized Euler equations for unsteady vortical flows around lifting airfoils

Scott, James R.↗

NASA NTRS1990

Numerical prediction of turbulent flow over airfoil sections with a new nonequilibrium turbulence model

A new nonequilibrium turbulence closure model has been developed for computing wall bounded two-dimensional turbulent flows. This two-layer eddy viscosity model was motivated by the success of the Johnson-King model in separated flow regions. The influence of history effects are described by an ordinary differential equation developed from the turbulent kinetic energy equation. The performance of the present model has been evaluated by solving the flow around three airfoils using the Reynolds time-averaged Navier-Stokes equations. Excellent results were obtained for both attached and separated turbulent flows about the NACA 0012 airfoil, the RAE 2822 airfoil, and the Integrated Technology A 153W airfoil. Based on the comparison of the numerical solutions with the available experimental data, it is concluded that the new nonequilibrium turbulence model accurately captures the history effects of convection and diffusion on turbulence.

Ahmed, S.↗

NASA NTRS1990

The semidiscrete Galerkin finite element modeling of compressible viscous flow past an airfoil

The primary project was the numerical simulation, by a finite element/finite difference method, of the viscous flow about an airfoil. The secondary project involved the numerical simulation of the three-dimensional separated and vortex-dominated flow about a hemispherically capped cylinder in the transonic regime. Preliminary calculations were started for the hemisphere-cylinder at 0 and 5 degree angle of attack. The solution of the flow field about airfoils and wings is required to determine the important parameters of lift, moment, and drag. Viscous effects must be accounted for if the drag is to be accurately calculated. At present there are basically two approaches to the numerical simulation of the flow field, the use of fully viscous models and the inviscid/viscous models. The fully viscous models require the solution of an approximation of the Navier-Stokes equations and therefore should simulate most of the physical mechanisms. A fast, accurate, and computationally efficient inviscid flow solver was recently developed by Hartwich. It is thought that Hartwich's program coupled to a fast, accurate, and computationally efficient boundary layer code, will make an excellent tool for airfoil design. The purpose of the primary project was to develop a compressible boundary layer code using the semidiscrete Galerkin finite element method. The numerical scheme employed used the combination of a Dorodnitsyn formulation of the boundary layer equations, with a finite difference/finite element procedure (semidiscrete Galerkin method), in the solution of the compressible two-dimensional boundary layer equations. A laminar compressible boundary layer code was developed and tested for a NACA 0012 airfoil at a Mach number of 0.5, a Reynolds number of 5000, and zero angle of attack. At present the boundary layer program solves up to, but not beyond, separation.

Meade, Andrew J.↗

NASA NTRS1991

Icing characteristics of a natural-laminar-flow, a medium-speed, and a swept, medium-speed airfoil

Tests were conducted at the Icing Research Tunnel at the NASA Lewis Research Center to determine the icing characteristics of three modern airfoils, a natural laminar flow, a medium speed and a swept medium speed airfoil. Tests measured the impingement characteristics and drag degradation for angles of attack typifying cruise and climb for cloud conditions typifying the range that might be encountered in flight. The maximum degradation occurred for the cruise angle of attack for the long glaze ice condition for all three airfoils with increases over baseline drag being 486 percent, 510 percent, and 465 percent for the natural laminar flow, the medium speed and the swept medium speed airfoil respectively. For the climb angle of attack, the maximum drag degradation (and extent of impingement) observed were also for the long glaze ice condition, and were 261 percent, 181 percent and 331 percent respectively. The minimum drag degradation (and extent of impingement) occurred for the cruise condition and for the short, rime spray which increases over baseline drag values of 47 percent, 28 percent and 46 percent respectively.

Bidwell, Colin S.↗

NASA NTRS1990

Application of a new Navier-Stokes inverse method to the design of advanced airfoils

A new inverse airfoil design method has been developed. This method couples a two-dimensional Navier-Stokes code to a residual-correction design algorithm to produce an efficient design code. Since this method can be used to design airfoils near the limits of performance capabilities, a technique to investigate the limits of lift has been developed to guide the design of new airfoils. Examples of the use of the inverse Navier-Stokes code and the maximum lift technology in the design of new airfoils are presented.

Narramore, J. C.↗

NASA NTRS1991

Design limits of compressible NLF airfoils

There has been considerable success in the design of practical low-speed natural laminar flow (NLF) airfoils, with significant profile drag reduction from conventional turbulent flow airfoils. The favorable lowspeed results give an incentive to explore the possibilities of high-subsonic speed NLF airfoil design. The design problem at higher freestream Mach numbers is more severe than for low-speed designs because these high-speed airplanes typically fly at higher chord Reynolds numbers than low-speed NLF airplanes. As the Mach number increases, the main priority changes from the use of sufficient acceleration to achieve NLF for low-drag, to the delay of separation in the far aft pressure recovery region. In this effort, NLF airfoils have been designed for Mach numbers ranging from 0.60 to 0.80 and chord Reynolds numbers of 30 x 10 to the 6th and 40 x 10 to the 6th.

Viken, Jeff↗

NASA NTRS1991

Icing characteristics of a natural-laminar-flow, a medium-speed, and a swept, medium-speed airfoil

Tests were conducted in the Icing Research Tunnel at the NASA Lewis Research Center to determine the icing characteristics of three modern airfoils: a natural-laminar-flow, a medium-speed, and a swept medium-speed airfoil. The tests measured the impingement characteristics and drag degradation for angles-of-attack typifying cruise and climb for cloud conditions typifying the range that might be encountered in flight. The maximum degradation occurred at the cruise angle-of-attack for the long, glaze ice condition for all three airfoils with increases over baseline drag being 486 percent, 510 percent, and 465 percent for the natural-laminar-flow, the medium-speed, and the swept, medium-speed airfoils, respectively. For the climb angle-of-attack, the maximum drag degradation (and total extent of impingement) observed were also for the long, glaze ice condition and were 261 percent, 181 percent, and 331 percent, respectively. The minimum drag degradation (and extent of impingement) occurred for the cruise condition and for the short, rime spray with increases over baseline drag values being 47 percent, 28 percent, 46 percent, respectively.

Bidwell, Colin S.↗

NASA NTRS1991

Airfoil design method using the Navier-Stokes equations

An airfoil design procedure is described that was incorporated into an existing 2-D Navier-Stokes airfoil analysis method. The resulting design method, an iterative procedure based on a residual-correction algorithm, permits the automated design of airfoil sections with prescribed surface pressure distributions. The inverse design method and the technique used to specify target pressure distributions are described. It presents several example problems to demonstrate application of the design procedure. It shows that this inverse design method develops useful airfoil configurations with a reasonable expenditure of computer resources.

Malone, J. B.↗

NASA NTRS1991

Calculation of unsteady airfoil loads with and without flap deflection at -90 degrees incidence

A method has been developed for calculating the viscous flow about airfoils with and without deflected flaps at -90 deg incidence. This unique method provides for the direct solution of the incompressible Navier-Stokes equations by means of a fully coupled implicit technique. The solution is calculated on a body-fitted computational mesh incorporating a staggered grid method. The vorticity is determined at the node points, and the velocity components are defined at the mesh-cell sides. The staggered-grid orientation provides for accurate representation of vorticity at the node points and for the conservation of mass at the mesh-cell centers. The method provides for the direct solution of the flow field and satisfies the conservation of mass to machine zero at each time-step. The results of the present analysis and experimental results obtained for a XV-15 airfoil are compared. The comparisons indicate that the calculated drag reduction caused by flap deflection and the calculated average surface pressure are in excellent agreement with the measured results. Comparisons of the numerical results of the present method for several airfoils demonstrate the significant influence of airfoil curvature and flap deflection on the predicted download.

Stremel, Paul M.↗

NASA NTRS1991

Inverse airfoil design procedure using a multigrid Navier-Stokes method

The Modified Garabedian McFadden (MGM) design procedure was incorporated into an existing 2-D multigrid Navier-Stokes airfoil analysis method. The resulting design method is an iterative procedure based on a residual correction algorithm and permits the automated design of airfoil sections with prescribed surface pressure distributions. The new design method, Multigrid Modified Garabedian McFadden (MG-MGM), is demonstrated for several different transonic pressure distributions obtained from both symmetric and cambered airfoil shapes. The airfoil profiles generated with the MG-MGM code are compared to the original configurations to assess the capabilities of the inverse design method.

Malone, J. B.↗

NASA NTRS1991

Study of a new airfoil used in reversible axial fans

The characteristics of the reverse ventilation of axial flow are analyzed. An s shaped airfoil with a double circular arc was tested in a wind tunnel. The experimental results showed that the characteristics of this new airfoil in reverse ventilation are the same as those in normal ventilation, and that this airfoil is better than the existing airfoils used on reversible axial fans.

Li, Chaojun↗

NASA NTRS1992

Experimental investigation of the flowfield of an oscillating airfoil

The flowfield of an airfoil oscillated periodically over a wide range of reduced frequencies, 0 less than or = k less than or = 1.6 is studied experimentally at chord Reynolds numbers of R sub c = 22,000 and 44,000. The NACA0012 airfoil is pitched sinusoidally about one quarter chord between angles of attack (alpha) of 5 and 25 degrees. Detailed flow visualization and phase averaged vorticity measurements are carried out for k = 0.2 to document the evolution and the shedding of the dynamic stall vortex (DSV). In addition to the DSV, an intense vortex of opposite sign originates from the trailing edge just when the DSV is shed. After being shed into the wake, the two together take the shape of a large 'mushroom' while being convected away from the airfoil. The unsteady circulation around the airfoil and, therefore, the time varying component of the lift is estimated in a novel way from the shed vorticity flux and is found to be in good agreement with the lift variation reported by others. The delay in the shedding of the DSV with increasing k, as observed by previous researchers, is documented for the full range of k. The DSV, for example, is shed nearly at the maximum alpha of 25 degrees at k = 0.2, but is shed at the minimum alpha of 5 degrees at k = 0.8. At low k, the flowfield appears quasi-steady and the bluff body shedding corresponding to the maximum alpha (25 degrees) dominates the unsteady fluctuations in the wake.

Panda, J.↗

NASA NTRS1992

Experimental investigation of the flowfield of an oscillating airfoil

The flow field of an airfoil oscillated periodically over a wide range of reduced frequencies, 0 less than k less than 1.6, is studied experimentally at chord Reynolds numbers of R sub c = 22,000 and 44,000. The NACA0012 airfoil is pitched sinusoidally about one quarter chord between alpha of 5 deg and 25 deg. Detailed flow visualization and phase averaged vorticity measurements are carried out for k = 0.2 to document the evolution and the shedding of the dynamic stall vortex (DSV). In addition to the DSV, an intense vortex of opposite sign originates from the trailing edge just when the DSV is shed. After being shed into the wake, the two together take the shape of a large 'mushroom' while being convected away from the airfoil. The unsteady circulation around the airfoil and, therefore, the time varying component of the lift is estimated in a novel way from the shed vorticity flux and is found to be in good agreement with the lift variation reported by others. The delay in the shedding of the DSV with increasing k, as observed by previous researchers, is documented for the full range of k. The DSV, for example, is shed nearly at the maximum alpha of 25 deg at k = 0.2, but is shed at the minimum alpha of 5 deg at k = 0.8. At low k, the flowfield appears quasi-steady and the bluff body shedding corresponding to the maximum alpha (25 deg) dominates the unsteady fluctuations in the wake.

Panda, J.↗

NASA NTRS1992

Transonic airfoil and wing design using Navier-Stokes codes

An iterative design method has been implemented into 2D and 3D Navier-Stokes codes for the design of airfoils or wings with given target pressure distributions. The method begins with the analysis of an initial geometry, and obtains the analysis pressure distributions of that geometry. The differences between analysis pressures and target pressures are used to drive geometry changes through the use of a streamline curvature method. This paper describes the procedure that makes the iterative design method work for Navier-Stokes codes. Examples of 2D airfoil design, and 3D wing design are included. It is demonstrated that the method is highly effective for airfoil or wing design at flow conditions where no substantial separation occurs. Problems encountered in the airfoil design with shock induced flow separations are discussed.

Yu, N. J.↗

NASA NTRS1992

The semi-discrete Galerkin finite element modelling of compressible viscous flow past an airfoil

A method is developed to solve the two-dimensional, steady, compressible, turbulent boundary-layer equations and is coupled to an existing Euler solver for attached transonic airfoil analysis problems. The boundary-layer formulation utilizes the semi-discrete Galerkin (SDG) method to model the spatial variable normal to the surface with linear finite elements and the time-like variable with finite differences. A Dorodnitsyn transformed system of equations is used to bound the infinite spatial domain thereby permitting the use of a uniform finite element grid which provides high resolution near the wall and automatically follows boundary-layer growth. The second-order accurate Crank-Nicholson scheme is applied along with a linearization method to take advantage of the parabolic nature of the boundary-layer equations and generate a non-iterative marching routine. The SDG code can be applied to any smoothly-connected airfoil shape without modification and can be coupled to any inviscid flow solver. In this analysis, a direct viscous-inviscid interaction is accomplished between the Euler and boundary-layer codes, through the application of a transpiration velocity boundary condition. Results are presented for compressible turbulent flow past NACA 0012 and RAE 2822 airfoils at various freestream Mach numbers, Reynolds numbers, and angles of attack. All results show good agreement with experiment, and the coupled code proved to be a computationally-efficient and accurate airfoil analysis tool.

Meade, Andrew J., Jr.↗

NASA NTRS1992

A composite structured/unstructured-mesh Euler method for complex airfoil shapes

A general two-dimensional Euler zonal method has been developed for computing flows about complex airfoil geometries such as multielement and iced airfoils. The method utilizes a composite structured and unstructured grid generated using conformal mapping and Delaunay triangulation, respectively. The finite-volume Euler method is then modified to couple solutions in the zones with structured and unstructured grids. Solutions about an iced airfoil and a multielement airfoil are given as examples of applications of the scheme.

Hefazi, H.↗