Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Waste Repository”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Reconsolidated Salt as a Geotechnical Barrier

Salt as a geologic medium has several attributes favorable to long-term isolation of waste placed in mined openings. Salt formations are largely impermeable and induced fractures heal as stress returns to equilibrium. Permanent isolation also depends upon the ability to construct geotechnical barriers that achieve nearly the same high-performance characteristics attributed to the native salt formation. Salt repository seal concepts often include elements of reconstituted granular salt. As a specific case in point, the Waste Isolation Pilot Plant recently received regulatory approval to change the disposal panel closure design from an engineered barrier constructed of a salt-based concrete to one that employs simple run-of-mine salt and temporary bulkheads for isolation from ventilation. The Waste Isolation Pilot Plant is a radioactive waste disposal repository for defense-related transuranic elements mined from the Permian evaporite salt beds in southeast New Mexico. Its approved shaft seal design incorporates barrier components comprising salt-based concrete, bentonite, and substantial depths of crushed salt compacted to enhance reconsolidation. This paper will focus on crushed salt behavior when applied as drift closures to isolate disposal rooms during operations. Scientific aspects of salt reconsolidation have been studied extensively. The technical basis for geotechnical barrier performance has been strengthened by recent experimental findings and analogue comparisons. The panel closure change was accompanied by recognition that granular salt will return to a physical state similar to the halite surrounding it. Use of run-of-mine salt ensures physical and chemical compatibility with the repository environment and simplifies ongoing disposal operations. Our current knowledge and expected outcome of research can be assimilated with lessons learned to put forward designs and operational concepts for the next generation of salt repositories. Mined salt repositories have the potential to isolate permanently vast inventories of radioactive and hazardous wastes.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Reconsolidated Salt as a Geotechnical Barrier - 16535

Salt as a geologic medium has several attributes favorable to long-term isolation of waste placed in mined openings. Salt formations are largely impermeable and induced fractures heal as stress returns to equilibrium. Permanent isolation also depends upon the ability to construct geotechnical barriers that achieve nearly the same high-performance characteristics attributed to the native salt formation. Salt repository seal concepts often include elements of reconstituted granular salt. As a specific case in point, the Waste Isolation Pilot Plant recently received regulatory approval to change the disposal panel closure design from an engineered barrier constructed of a salt-based concrete to one that employs simple run-of-mine salt and temporary bulkheads for isolation from ventilation. The Waste Isolation Pilot Plant is a radioactive waste disposal repository for defense related transuranic elements mined from the Permian evaporite salt beds in southeast New Mexico. Its approved shaft seal design incorporates barrier components comprising salt-based concrete, bentonite, and substantial depths of crushed salt compacted to enhance reconsolidation. This paper will focus on crushed salt behavior when applied as drift closures to isolate disposal rooms during operations. Scientific aspects of salt reconsolidation have been studied extensively. The technical basis for geotechnical barrier performance has been strengthened by recent experimental findings and analogue comparisons. The panel closure change was accompanied by recognition that granular salt will return to a physical state similar to the halite surrounding it. Use of run-of-mine salt ensures physical and chemical compatibility with the repository environment and simplifies ongoing disposal operations. Our current knowledge and expected outcome of research can be assimilated with lessons learned to put forward designs and operational concepts for the next generation of salt repositories. Mined salt repositories have the potential to isolate permanently vast inventories of radioactive and hazardous wastes. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Legacy Waste Containers for Low and Intermediate Level Radioactive Waste in Germany - Actual Situation and Challenges - 17070

Low and intermediate level radioactive waste has been produced in Germany for several decades. While a part of the waste had been deposited in the Morleben repository and the Asse mine which have been operated for just a limited period of time, the major amount is conditioned and packaged in temporarily stored waste containers. Those containers are designated for final disposal in the KONRAD repository being currently under construction and expected to start operation in 2022. As a consequence, an assessment of the waste container documentation and safety is strongly needed to receive an approval for the Konrad repository. This requalification is challenging because those old containers have to meet the same safety requirements as new containers. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Electrochemical Corrosion Studies for Modeling Metallic Waste Form Release Rates

The isotope 99 Tc is an important fission product generated from nuclear power production. Because of its long half-life (t 1/2 = 2.13 ∙ 10 5 years) and beta-radiotoxicity (β⁻ = 292 keV), it is a major concern in the long-term management of spent nuclear fuel. In the spent nuclear fuel, Tc is present as an alloy with Mo, Ru, Rh, and Pd called the epsilon-phase, the relative amount of which increases with fuel burn-up. In some separation schemes for spent nuclear fuel, Tc would be separated from the spent fuel and disposed of in a durable waste form. Technetium waste forms under consideration include metallic alloys, oxide ceramics and borosilicate glass. In the development of a metallic waste form, after separation from the spent fuel, Tc would be converted to the metal, incorporated into an alloy and the resulting waste form stored in a repository. Metallic alloys under consideration include Tc–Zr alloys, Tc–stainless steel alloys and Tc–Inconel alloys (Inconel is an alloy of Ni, Cr and iron which is resistant to corrosion). To predict the long-term behavior of the metallic Tc waste form, understanding the corrosion properties of Tc metal and Tc alloys in various chemical environments is needed, but efforts to model the behavior of Tc metallic alloys are limited. One parameter that should also be considered in predicting the long-term behavior of the Tc waste form is the ingrowth of stable Ru that occurs from the radioactive decay of 99 Tc ( 99 Tc → 99 Ru + β⁻). After a geological period of time, significant amounts of Ru will be present in the Tc and may affect its corrosion properties. Studying the effect of Ru on the corrosion behavior of Tc is also of importance. In this context, we studied the electrochemical behavior of Tc metal, Tc-Ni alloys (to model Tc-Inconel alloy) and Tc-Ru alloys in acidic media. The study of Tc-U alloys has also been performed in order to better understand the nature of Tc in metallic spent fuel. Computational modeling and simulations were performed to shed light on experimental results and explain structural and kinetics trends.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The SD-20K, a large Type B(U)F Package for Waste Containers - 18181

The type B(U)F package SD-20K, currently being developed by DAHER Nuclear Technologies GmbH (DNT), will facilitate the transport of legacy waste from interim storage facilities to the German final repository Konrad. The package SD-20K could also be used in other cases where legacy packages are not fit for a final repository and/or for transport but could be easily conditioned into a suitable package. Since the 1990's German utilities, reactor operators and service providers conditioned waste according to the requirements of the preliminary acceptance criteria for the final repository Konrad. Some of this waste was conditioned in containers which were at that time licensed as type B packages but for which the license expired due to various reasons. Other waste was reclassified so that the used package type does no longer comply with the content. In recent times Konrad containers of type IP-2 are loaded with e. g. core components in compliance with the Konrad acceptance criteria but overloaded with respect to the transport regulations. DAHER Nuclear Technologies GmbH (DNT) in cooperation with Siemens AG investigated possible solutions in a general approach. The result of the evaluation was that the best solution for the transport problem was to develop a versatile type B(U)F package large enough to accommodate all containers and packages accepted for the final repository Konrad. Possible solutions like repacking (high costs and high dose exposure) or requalification (high costs and risk of failure to achieve the goal) were not considered to be generally applicable. The SD-20K packaging is currently designed to accommodate Konrad Containers type III, IV and VI; however, the dimensions of its cavity are sufficient to accommodate any container and package that meets the acceptance criteria for the final repository Konrad. The SD-20K packaging consists of an inner container which constitutes the containment, surrounded by a rather large shock absorbing structure which also contains the thermal protection system. The outer shape of the SD-20K resembles a 20' ISO container. A special feature of the SD-20K is the automatic unloading system to minimize dose exposure of the personnel in the final repository. After arrival in the repository the shock absorbing structure as well as the door of the containment system are opened automatically and the content is moved out of the SD-20K by a remote-controlled carrier system. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Disposal Concepts for a High-Temperature Repository in Shale.

Disposal of large, heat-generating waste packages containing the equivalent of 21 pressurized water reactor (PWR) assemblies or more is among the disposal concepts under investigation for a future repository for spent nuclear fuel (SNF) in the United States. Without a long (>200 years) surface storage period, disposal of 21-PWR or larger waste packages (especially if they contain high-burnup fuel) would result in in-drift and near-field temperatures considerably higher than considered in previous generic reference cases that assume either 4-PWR or 12-PWR waste packages (Jové Colón et al. 2014; Mariner et al. 2015; 2017). Sevougian et al. (2019c) identified high-temperature process understanding as a key research and development (R&D) area for the Spent Fuel and Waste Science and Technology (SFWST) Campaign. A two-day workshop in February 2020 brought together campaign scientists with expertise in geology, geochemistry, geomechanics, engineered barriers, waste forms, and corrosion processes to begin integrated development of a high-temperature reference case for disposal of SNF in a mined repository in a shale host rock. Building on the progress made in the workshop, the study team further explored the concepts and processes needed to form the basis for a high-temperature shale repository reference case. The results are described in this report and summarized..

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Mechanical response and microprocesses of reconsolidating crushed salt at elevated temperature

Design, analysis and performance assessment of potential salt repositories for heat-generating nuclear waste require knowledge of thermal, mechanical, and fluid transport properties of reconsolidating granular salt. So, to inform salt repository evaluations, we have undertaken an experimental program to determine Bulk and Young’s moduli and Poisson’s ratio of reconsolidated granular salt as a function of porosity and temperature and to establish the deformational processes by which the salt reconsolidates. Our tests were conducted at 100, 175, and 250 °C. In hydrostatic tests, confining pressure is increased to 20 MPa with periodic unload/reload loops to determine K. Volume strain increases with increasing temperature. In shear tests at 2.5 and 5 MPa confining pressure, after confining pressure is applied, the crushed salt is subjected to a differential stress, with periodic unload/reload loops to determine E and ν. At predetermined differential stress levels the stress is held constant and the salt consolidates. Displacement gages mounted on the samples show little lateral deformation until the samples reach a porosity of ~10 %. Interestingly, vapor is vented only for 250 °C tests and condenses at the vent port. It is hypothesized that the brine originates from fluid inclusions, which were made accessible by heating and intragranular deformational processes including decrepitation. Furthermore, identification and documentation of consolidation processes are inferred from optical and scanning electron microstructural observations. As a result, densification at low porosity is enhanced by water film on grain boundaries that enables solution-precipitation phenomena.

58 GEOSCIENCES↗

Searching for science in the past and present discussion on commingling policy in the US - 15083

Since 1985, the policy in the United States for disposing of nuclear waste has included commingling defense and civilian spent nuclear fuel (SNF) and high-level radioactive waste (HLW) in a mined geologic repository. Commingling policy is under discussion again because of developments over the last several years in the nuclear waste management and disposal program. The authors reviewed the extent to which scientific and technical information was involved in considerations of commingling from the 1950's to the present. Evaluations undertaken by the US Department of Energy (US DOE) in 1985 and April 2014 are compared and the technical issues of health and safety, transportation, and national security are addressed in both evaluations. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

GDSA Repository Systems Analysis FY19 Update

The Spent Fuel and Waste Science and Technology (SFWST) Campaign of the U.S. Department of Energy Office of Nuclear Energy, Office of Spent Fuel and Waste Disposition (SFWD), has been conducting research and development on generic deep geologic disposal systems (i.e., geologic repositories). This report describes specific activities in the second half of Fiscal Year (FY) 2019 associated with the Geologic Disposal Safety Assessment (GDSA) Repository Systems Analysis (RSA) work package within the SFWST Campaign. The overall objective of the GDSA RSA work package is to develop generic deep geologic repository concepts and system performance assessment (PA) models in several host-rock environments, and to simulate and analyze these generic repository concepts and models using the GDSA Framework toolkit, and other tools as needed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

GDSA Repository Systems Analysis Progress Report

The Spent Fuel and Waste Science and Technology (SFWST) Campaign of the U.S. Department of Energy Office of Nuclear Energy, Office of Spent Fuel and Waste Disposition (SFWD), has been conducting research and development on generic deep geologic disposal systems (i.e., geologic repositories). This report describes specific activities in fiscal year (FY) 2019 associated with FY19 Geologic Disposal Safety Assessment (GDSA) Repository Systems Analysis (RSA) work package within the SFWST Campaign. The overall objective of the GDSA RSA work package is to develop generic deep geologic repository concepts and system performance assessment (PA) models in several host-rock environments, and to simulate and analyze these generic repository concepts and models using the GDSA Framework toolkit, and other tools as needed.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

GDSA Repository Systems Analysis Investigations (FY2020)

The Spent Fuel and Waste Science and Technology (SFWST) Campaign of the U.S. Department of Energy Office of Nuclear Energy, Office of Spent Fuel and Waste Disposition (SFWD), has been conducting research and development on generic deep geologic disposal systems (i.e., geologic repositories). This report describes specific activities in the Fiscal Year (FY) 2020 associated with the Geologic Disposal Safety Assessment (GDSA) Repository Systems Analysis (RSA) work package within the SFWST Campaign. The overall objective of the GDSA RSA work package is to develop generic deep geologic repository concepts and system performance assessment (PA) models in several host-rock environments, and to simulate and analyze these generic repository concepts and models using the GDSA Framework toolkit, and other tools as needed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

KOMPASS: Compaction of crushed salt for the safe containment

In Germany, rock salt formations are a possible host rock taken into account for the safe disposal of heat-emitting radioactive waste. With respect to crushed salt will be used in the repository for backfilling of open cavitied (using dry material). With time, the crushed salt will be compacted by the convergence of the host rock and reaches porosities comparable with the rock salts. The compaction behaviour of crushed salt has been investigated within the last 40 years, however, its behaviour at low porosities and the resulting low permeabilities becomes relevant with the introduction of the approach of the containment providing rock zone. In the current state, the database and process understanding have some important gaps in knowledge referring the material behaviour, existing laboratory and numerical models, especially for the porosity range. The objective of this project was the development of methods and strategies for the reduction of deficits in the prediction of crushed salt compaction leading to an improvement of the prognosis quality. It includes the development of experimental methods for determining crushed salt properties in the range of low porosities, the enhancement of process understanding and the investigation and development of existing numerical models.

Crushed salt compaction↗

Approaches to multi-scale analyses of mechanically and thermally-driven migration of fluid inclusions in salt rocks

Fluid inclusions are found within mineral crystals or along grain boundaries in many sedimentary rocks, notably in evaporite formations, and can migrate along a thermal or hydro-mechanical gradient. Shale and salt rocks have been considered potential host rocks for radioactive waste disposal, due to their low permeability. Previously stagnant inclusions may become mobilised by a perturbation of the in situ state by a geotechnical installation or the emplacement of heat-generating waste. Here, the migration of fluid inclusions can thus have important impacts on the long-term performance of a geologic repository for high-level radioactive waste disposal. As a part of the international research project DECOVALEX-2019, two aspects of fluid inclusion migration in rock salt are currently investigated under different boundary conditions: a) altered hydro-mechanical conditions as a consequence of tunnel excavation or borehole drilling and b) coupled thermo-hydro-mechanical-chemical conditions during the heating period of the post-closure phase of a repository.

58 GEOSCIENCES↗

Analysis of space systems for the space disposal of nuclear waste follow-on study. Volume 2: Technical report

The space option for disposal of certain high-level nuclear wastes in space as a complement to mined geological repositories is studied. A brief overview of the study background, scope, objective, guidelines and assumptions, and contents is presented. The determination of the effects of variations in the waste mix on the space systems concept to allow determination of the space systems effect on total system risk benefits when used as a complement to the DOE reference mined geological repository is studied. The waste payload system, launch site, launch system, and orbit transfer system are all addressed. Rescue mission requirements are studied. The characteristics of waste forms suitable for space disposal are identified. Trajectories and performance requirements are discussed.

Source record↗

Micromechanical processes in consolidated granular salt

Here, granular salt is likely to be used as backfill material and a seal system component within geologic salt formations serving as a repository for long-term isolation of nuclear waste. Pressure from closure of the surrounding salt formation will promote consolidation of granular salt, eventually resulting in properties comparable to native salt. Understanding dependence of consolidation processes on stress state, moisture availability, temperature, and time is important for demonstrating sealing functions and long-term repository performance. This study characterizes laboratory-consolidated granular salt by means of microstructural observations. Granular salt material from mining operations was obtained from the bedded Salado Formation hosting the Waste Isolation Pilot Plant and the Avery Island salt dome. Laboratory test conditions included hydrostatic consolidation of jacketed granular salt with varying conditions of confining isochoric stress to 38 MPa, temperature to 250 °C, moisture additions of 1% by weight, time duration, and vented and non-vented states. Resultant porosities ranged between 1% and 22%. Optical and scanning electron microscopic techniques were used to ascertain consolidation mechanisms. From these investigations, samples with 1% added moisture or unvented during consolidation, exhibit clear pressure solution processes with tightly cohered grain boundaries and occluded fluid pores. Samples with only natural moisture content consolidated by a combination of brittle, cataclastic, and crystal plastic deformation. Recrystallization at 250 °C irrespective of moisture conditions was also observed. The range and variability of conditions applied in this study, combined with the techniques used to display microstructural features, are unique, and provide insight into an important area of governing deformation mechanism(s) occurring within salt repository applications.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Improving actinides recycling, a key step towards a more sustainable nuclear energy - 15617

Nuclear energy is thought to be one of the energy sources that could help mitigating the global climate change together with the renewables, due to its low green-house-gases emissions, its reliability and its high load power. However, nuclear energy will only develop if future nuclear energy systems meet the criteria of sustainability in terms of durability, bearability and liveability. Nowadays, many countries chose the so-called once-through cycle which basically considers spent nuclear fuel as a waste, whereas others reprocess their spent fuel to recover the energetically-valuable material Pu (and partially U) to produce Mixed Oxide Fuel (MOX) to be irradiated in a second cycle (twice-through cycle). Both options can be considered relevant, fitting diverse criteria; but if we consider a long lasting prospective for nuclear options, the once-through cycle sustainability is clearly lower (low consumption of natural resource, no recycling of potentially valuable energetic material, larger volume of waste...). Reversely, twice-through cycle can be seen as a first step towards an improved sustainability with a partial recycling of U/Pu and the reduction of the waste volume and toxicity. However, it is likely not sufficient for the long-term and implementing more efficient recycling is a key-driver to improve the environmental friendship, the economics and the social acceptability of nuclear energy. Future nuclear fuel cycles will have to better preserve the natural resource by improving the actinides recycling, to minimize the volume and toxicity of nuclear waste, to ensure their long-term confinement and to prevent any proliferation-risk. Such a gradual and progressive process calls for implementing appropriate technologies, either for reactors but also for fuel treatment/recycling facilities. This paper will describe the successive step that would allow improving the overall sustainability. Indeed, recycled Pu can be once recycled in MOX fuel feeding similar PWRs (Pressurized Water Reactor). Together with the recycling of reprocessed uranium, this first step already allows preserving ∼17% of the natural U resource and to confine ultimate wastes without Pu in a tailored durable wasteform. Subsequent Pu multi-recycling requires introducing Fast Reactors (FR) to efficiently use U-238 available in natural and depleted uranium stockpiles. In parallel, recycling processes would have to be adapted for treating spent LWR and SFR MOX spent fuels, which is currently under study thanks to an ambitious R and D program dedicated on MOX treatment and recycling. For the longer term, minor actinides recycling would allow decreasing the waste burden towards future generations: (i) Am-recycling leads to decrease the waste residual heat-power and increase the repository density and lifespan, (ii) Cm-recycling leads to decrease waste long-term toxicity. The stepwise implementation of these different processes defines a path towards sustainability for nuclear energy that are described in this paper from the fuel cycle viewpoint. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗